• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.76-79
• /
• 2008

This study presents the use of multi-temporal JERS-1 SAR images to the land cover classification. So far, land cover classified by high resolution aerial photo and field survey and so on. The study site was located in Non-san area. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then classified land cover. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.138-141
• /
• 2007

The permanent scatterer SAR interferometry (PSInSAR) technique has been developed more recently and has been applied to monitor slow but consistent ground subsidence. Since PSInSAR has the advantages in terms of baseline and temporal decorrelation, PSInSAR technique using X-band may also provide useful information about a ground deformation in detail. We developed our codes for a persistent scatterer analysis, and then apply to ERS-1/2 C-band data over Las Vegas in order to validate our new developed algorithm. Based on this test, PS technique using X-band observation such as TerraSAR-X or KOMSAT 5 will be developed.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1070-1072
• /
• 2003

This study focuses on examing the feasibility of differential SAR interferometry (DInSAR) in the Northeastern Kyungsang Basin, Korea. Major faults in the Kyungsang Basin such as Yangsan fault, Dongrae fault, and Ulsan fault had developed during Cretaceous, and the activeness of these faults is still controversial in Korean geology community. We attempt to measure displacements in the study area by applying DInSAR techniques to JERS-1 SAR data sets. Some surface displacements are recognized by DInSAR method at Young-il Bay in which the POSCO Company locates, although the displacements may not be directly associated with geologic structures. We also discuss atmospheric effects for the techniques used.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.9-14
• /
• 2020

In this paper, Qualification Model of frequency synthesizer is designed for X-band SAR system and performed electrical and environment test. Designed frequency synthesizer generate 13.65 GHz with very low phase noise performance. The integrated phase noise from 10Hz to 1MHz is -37.91 dBc. IRF performances are analyzed according to phase noise and jitter. Also, thermal and structure analysis are achieved for stable operation in space environment. Designed frequency synthesizer is consist of 2 modules of 6U size and generate L-band, C-band, Ku-band. The result of this study would enhance the design ability of RF module and help the frequency synthesizer design for SAR payload system.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.58-65
• /
• 2002

The most widespread techniques for DEM generation are stereoscopy for optical sensor images and interfereometry for SAR images. These techniques suffer from certain sensor and processing limitations, which can be overcome by the synergetic use of both sensors and DEMs respectively. In this paper, different strategies for fusing SAR and optical data are combined to derive high quality DEM products. The multiresolution wavelet transform, which take advantage of the complementary properties of SAR and stereo optical DEMs, will be applied for the fusion process. By taking advantage of the fact that errors of the DEMs are of different nature using the multiresolution wavelet transform, affected part are filtered and replaced by those of the counterpart and is tested with two sets of SPOT and ERS DEM, resulting in a remarkable improvement in DEM. For the analysis of results, the reference DEM is generated from digital base map(1:5000).

• Korean Journal of Remote Sensing
• /
• v.34 no.5
• /
• pp.739-747
• /
• 2018

Integration analysis of multi-sensor satellite images is becoming increasingly important. The first step in integration analysis is image registration between multi-sensor. SIFT (Scale Invariant Feature Transform) is a representative image registration method. However, optical image and SAR (Synthetic Aperture Radar) images are different from sensor attitude and radiation characteristics during acquisition, making it difficult to apply the conventional method, such as SIFT, because the radiometric characteristics between images are nonlinear. To overcome this limitation, we proposed a modified method that combines the SAR-SIFT method and shape descriptor vector DLSS(Dense Local Self-Similarity). We conducted an experiment using two pairs of Cosmo-SkyMed and KOMPSAT-2 images collected over Daejeon, Korea, an area with a high density of buildings. The proposed method extracted the correct matching points when compared to conventional methods, such as SIFT and SAR-SIFT. The method also gave quantitatively reasonable results for RMSE of 1.66m and 2.45m over the two pairs of images.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.16-23
• /
• 2011

This paper suggests a motion compensation technique using GPS/IMU data in order to compensate for phase error caused by undesired motion of radar platform. An actual flight trajectory would be deviate from an ideal straight-constant trajectory with a constant velocity for SAR imaging, due to pitch, roll and yaw motion of aircraft caused by turbulence. This leads to blurred SAR images due to inter-pulse phase errors as well as along-track velocity errors. If the motion compensation is carried out to reduce those errors, SAR image quality can be significantly improved. Simulation results show that the motion compensation technique introduced in this paper is an effective tool to improve SAR image quality against severe motion of radar platform.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.125-132
• /
• 2024

Optical satellite images are being used for national security and collection of information, and their utilization is increasing. However, it acquires low-quality images that are not suitable for the user's requirement due to weather conditions and time constraints. In this paper, a deep learning-based conversion of image and colorization model referring to high-resolution SAR images was created to simulate the occluded area with clouds of optical satellite images. The model was experimented according to the type of algorithm applied and input data, and each simulated images was compared and analyzed. In particular, the amount of pixel value information between the input black-and-white image and the SAR image was similarly constructed to overcome the problem caused by the relatively lack of color information. As a result of the experiment, the histogram distribution of the simulated image learned with the Gray-scale image and the high-resolution SAR image was relatively similar to the original image. In addition, the RMSE value was about 6.9827 and the PSNR value was about 31.3960 calculated for quantitative analysis.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.547-550
• /
• 2001

Through matched filtering synthetic aperture radar (SAR) produces high-resolution imagery from data collected by a relative small antenna. While the impulse response obtained by the matched filter approach produces the best achievable signal-to-noise ratio, large sidelobes must be reduced to obtain higher-resolution SAR images. So, many enhancement methods of SAR imagery have been proposed. As a deconvolution method, the phase-extension inverse filtering is based on the characteristics of the matched filtering used in SAR imaging. It improves spatial resolution as well as effectively suppresses the sidelobes with low computational complexity. In the phase-extension inverse filtering, the impulse response is obtained from simulation with a point target. But in a real SAR environment, for example ERS-1, the impulse response is distorted by many non-ideal factors. So, in the phase-extension inverse filtering for a real SAR processing, the magnitudes of the frequency transfer function have to be compensated to produce more desirable results. In this paper, an estimation method to obtain a more accurate impulse response from a real SAR image is studied. And a compensation scheme to produce better performance of the phase-extension inverse filtering is also introduced.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.150-155
• /
• 2002

SAR 시스템은 능동적 센서로 마이크로파라 불리우는 전자기파를 직접 지상에 보내고 돌아오는 신호의 위상과 진폭을 이용하여 영상으로 나타내는 간섭성 시스템이다. 이러한 영상의 특성으로 인해 날씨나 태양의 유 무에 상관없이 영상을 취득할 수 있는 장점이 있다. 또한, 최근에는 기존의 다중분광 위성영상과의 SAR 영상의 Data Fusion을 통해 지상의 새로운 정성적 정보를 취득하려는 시도 등 나날이 그 활용성이 증대되고 있는 상황이다. 그러나 SAR 영상의 광범위한 활용을 위해서는 먼저 영상의 지형보정이 선행되어야 한다. 따라서 본 연구에서는 SAR 영상의 활용을 위해서 선행되어야 할 지형보정의 알고리즘을 컴포넌트 기반의 프로그램으로 구현하고 대상연구지역에 대한 적용을 통해 그 활용성과 가능성을 보여주고자 한다. 연구대상지역은 ERS-1, ERS-2 SAR로 촬영된 대전광역시와 그 주변지역으로 해당 SAR 영상에 대하여 엄밀지형보정 알고리즘과 경사거리 영상을 지상거리 영상으로 변환하는 알고리즘을 개발하여 적용하였다. 실험결과 공칭해상도 30m의 ERS 영상에 대하여 39.7m(X방향으로 24.5m, Y방향으로 31.3m)의 수평오차를 나타내었으며 경사거리 영상의 지상거리 영상으로의 변환도 원활하게 수행됨을 알 수 있었다. 마지막으로 본 연구를 통해 연구된 모든 알고리즘은 컴포넌트 기반으로 설계하고 구현되어 향후 국내 SAR 처리기술 개발에 있어서 공유할 수 있도록 하였다.