• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.55-60
• /
• 2017

Capacitor Charging Power Supply(CCPS) is one of the most important components of a pulsed power system. The CCPS is widely used in source of lasers, accelerators and plasma generators. This paper presents design of a dead time control circuit and operation characteristics for stable high repetition rate of high voltage CCPS. The CCPS consists of battery, high voltage transformer and controller with a dead time control circuit. A dead time control circuit was simulated by PSpice. The performance test of the CCPS was carried out with a 7[nF] load capacitor at output voltage of 50[kV] and a pulse repetition frequency of 100[Hz]. As a result, we can verify that charging and discharging waveform is stable at 100[Hz]. The experiment results indicate that 3[ms] dead time made it possible for stable high repetition rate of 100[Hz]. This paper paves the way for designing an advanced CCPS which is more applicable outside experiments.

• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.185-194
• /
• 2018

Interaction among multiple grid-connected inverters has a negative impact on the stable operations and power quality of a power grid. The interrelated influences of inverter inductor-capacitor-inductor filters constitute a high-order power network, and consequently, excite complex resonances at various frequencies. This study first establishes a micro-grid admittance matrix, in which inverters use deadbeat control. Multiple resonances can then be evaluated via modal analysis. For the active damping method applied to deadbeat control, the sampling frequency and the stable domain of the virtual damping ratio are also presented by analyzing system stability in the discrete domain. Simulation and experimental results confirm the efficiency of modal analysis and stable domain calculation in multi-inverter grid-connected systems.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.7
• /
• pp.153-160
• /
• 2019

This study aims to analyze the mutual influences between adolescents' multicultural acceptability and school adjustment. Research problems for research are as follows. First, is multicultural acceptability and school adjustment stable over time? Second, what is the longitudinal impact of school adjustment on multicultural acceptability over time? Third, what is the longitudinal impact of multicultural acceptability on school adjustment over time? The results of analyzing the research problems by applying the autoregressive cross-lagged model are as follows. First, the autoregressive model of school adjustment has a significant effect on the future time point and is stable over time. Second, the autoregressive model of multicultural acceptability have a significant effect on the future time point and is stable over time. Third, cross-lagged effect from school adjustment to multicultural acceptability has a statistically significant effect on the multicultural acceptability at a later time, and is stable over time. Fourth, cross-lagged effect from multicultural acceptability to school adjustment was not statistically significant at the time of multicultural acceptability, and there was no change with time. This study is meaningful to provide the theoretical and practical implications by verifying the influence of the three - year term data over time.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.2
• /
• pp.1756-1762
• /
• 2019

Background: Functional ankle instability (FAI) indicating a decrease in muscle strength, proprioception, neuromuscular control, balance and postural control function. Objective: To investigate the effect of jumping exercise on the supporting surface on the ankle muscle thickness, proprioceptive sensation, and balance in adults with FAI. Design: Randomized Controlled Trial. Methods: Twenty young people with FAI were randomly assigned to the unstable supporting surface jump group (N=10) and the stable supporting surface jump group (N=10). The intervention was conducted three times a week for eight weeks, and for 30 minutes per session. Trampoline was used as an unstable support surface and the stable support surface was carried out on a regular floor. The thickness of the tibialis anterior muscle and medial gastrocnemius muscle was measured by ultrasonography, and the proprioception of dorsiflexion and plantarflexion was measured using an electrogoniometer. The dynamic balance was also measured with a balance meter. Results: The the muscle thickness of the medial gastrocnemius muscle was significantly higher in the stable supporting surface jump group than in the unstable supporting surface jump group (p<.05). Furthermore, the plantar flexion proprioception and dynamic balance were significantly improved in the unstable supporting surface jump group than in the stable supporting surface jump group in the intergroup comparison (p<.05). Conclusions: The conclusion has been reached in this study that the jumping exercise on the unstable supporting surface could be a more effective in improving FAI than the regular surface.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2098-2114
• /
• 2021

Light intensity variation is one of the key factors which affect the accuracy of vehicle face re-identification, so in order to improve the robustness of vehicle face features to light intensity variation, a Nonnegative Matrix Factorization model with the constraint of image acquisition time difference is proposed. First, the original features vectors of all pairs of positive samples which are used for training are placed in two original feature matrices respectively, where the same columns of the two matrices represent the same vehicle; Then, the new features obtained after decomposition are divided into stable and variable features proportionally, where the constraints of intra-class similarity and inter-class difference are imposed on the stable feature, and the constraint of image acquisition time difference is imposed on the variable feature; At last, vehicle face matching is achieved through calculating the cosine distance of stable features. Experimental results show that the average False Reject Rate and the average False Accept Rate of the proposed algorithm can be reduced to 0.14 and 0.11 respectively on five different datasets, and even sometimes under the large difference of light intensities, the vehicle face image can be still recognized accurately, which verifies that the extracted features have good robustness to light variation.

• The Journal of Korean Physical Therapy
• /
• v.34 no.6
• /
• pp.312-316
• /
• 2022

Purpose: The purpose of this study was to investigate the effect of a kettlebell complex program according to the support surface on the lower extremity muscle activity and balance of baseball players. Methods: The participants were divided into two groups; unstable support surface group 1 (11 people) performed the kettlebell complex program on an unstable support surface, and stable support surface group 2 (10 people) performed the kettlebell complex program on a stable support surface. Muscle activity was measured by surface electromyography. Dynamic balance was measured with a balance-measuring equipment. A paired t-test was used to compare groups before and after the experiment. An independent t-test was performed to determine the difference in the degree of change between the two groups before and after the experiment. Results: The intragroup comparison between stable support surface group 1 and 2 showed significant differences in muscle activity and sense of balance. In the comparison between the groups, the difference in muscle activity in unstable support surface group1 was significant in the biceps femoris and rectus femoris muscles, and significant differences were also found in the sense of balance. Conclusion: These results suggest that a kettlebell exercise on an unstable support surface is more effective in improving muscle activity and sense of balance than a kettlebell exercise on a stable support surface.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2022

Purpose: The purpose of this study is to examine the unstable wall squat exercise and stable bridge exercise on posture in normal adults. Methods: The subjects of this study were 34 university students who were normal health adults, equally and randomly allocated to a unstable wall squat exercise group (male 7, female 10), an experimental group, and a stable bridge exercise group, a control group. Both did so for 30 minutes three times per week over a six-weeks period. Using Back Mapper, their trunk inclination (TIN), trunk imbalance (TIM), pelvic position (PPO), pelvic torsion (PTO), pelvic rotation (PRO) and the position of their scapula (PSA) were evaluated. Results: When the pre-test and post-test results of experimental group and control group were compared, statistically significant differences in TIN, PTO and PSA of experimental group were seen. Conclusion: Unstable wall squat exercise accompanied by abdominal drawing-in may be applied as a method to correct the posture in normal adults.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.428-432
• /
• 2012

Polyamidimide (PAI)-colloidal silica (CS) nanohybrid films were synthesized by an advanced sol-gel process. The synthesized PAI-CS hybrid films have a uniform and stable chemical bonding and there is no interfacial defects observed by TEM. The thermal degradation ratio of PAI-CS (10 wt%) hybrid films is delayed by 100 ℃ compared with pure PAI sample determined by on set temperature range in TGA. The dielectric constant of PAI-CS (10 wt%) hybrid films decreases with increasing CS content up to about 5 wt% but increases at higher CS content, which is not explained simply by effective medium therories (EMT). The duration time of PAI-CS (10 wt%) hybrid coil is 38 sec, which is very longer than that of pure PAI coil sample. The PAI-CS (10 wt%) hybrid film has a higher breakdown voltage resistance than the pure PAI film at surge environment and exhibits superior heat resistance. The PAI-CS (10 wt%) sample shows the advanced and stable thermal emission properties in transformer module compared with the pure PAI sample. This result illustrates that the advanced thermal conductivity and expansion properties of PAI-CS sample in the case of appropriate sol-gel processes brings the stable thermal emission in transformer system. Therefore, new PAI-CS hybrid samples with such stable thermal emission properties are expected to be used as a high functional coating application in ET, IT and electric power products.

• International journal of advanced smart convergence
• /
• v.13 no.2
• /
• pp.130-135
• /
• 2024

The Stable diffsuion AI tool is popular among designers because of its flexible and powerful image generation capabilities. However, due to the diversity of its AI models, it needs to spend a lot of time testing different AI models in the face of different design plans, so choosing a suitable general AI model has become a big problem at present. In this paper, by comparing the AI images generated by two different Stable diffsuion models, the advantages and disadvantages of each model are analyzed from the aspects of the matching degree of the AI image and the prompt, the color composition and light composition of the image, and the general AI model that the generated AI image has an aesthetic sense is analyzed, and the designer does not need to take cumbersome steps. A satisfactory AI image can be obtained. The results show that Playground V2.5 model can be used as a general AI model, which has both aesthetic and design sense in various style design requirements. As a result, content designers can focus more on creative content development, and expect more groundbreaking technologies to merge generative AI with content design.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.2
• /
• pp.963-973
• /
• 1996

The purpose of this study was to evaluate and compare the limits of stability(LOS) at different sensory conditions in normal 20 years of age. The LOS was measured at stable surface, and unstable surface and the subjects stood with the feet contacted and 4 inches between the feet with the eyes open and the eyes closed. In this study, 20 physical therapy major subjects were evaluated at Wonkwang Public Health Junior College. In this study applied the paired t-test, and Kruskal-Wallis 1-way ANOVA to determine the statistical significance of results at 0.01 level of significance. The results were as follows: 1. The mean of lateral limits of stability was b.67 degree at stable surface with the eyes open and standing with the feet contacted. 2. The mean of anteroposterior limits of stability was 9.78 degree at stable surface with the eyes open and standing with the feet contacted. 3. The mean of lateral limits of stability was 15.10 degree at stable surface with the eyes open and standing with 4 inches between the feet. 4. The mean of anteroposterior limits of stability was 11.72 degree at stable surface with the eyes open and standing with 4 inches between the feet. 5. The anterior-posterior and lateral limits of stability significantly decreased with the eyes closed(p<0.01). 6. The anterior-posterior and lateral limits of stability significantly decreased at unstable surface(p<0.01). 7. There was no significant difference of limits of stability as the height and foot length(p>0.01).