• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.261-283
• /
• 2023

This study aimed to review the performance stability of PET (Polyethylene terephthalate) fiber reinforcing materials among the synthetic fiber types for which the application of performance reinforcing materials to fiber-reinforced concrete is being reviewed by examining short-term and long-term performance changes. To this end, the residual performance was analyzed after exposing the PET fiber to an acid/alkali environment, and the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture by age were analyzed, and the surface of the PET fiber collected from the concrete specimen was examined using a scanning microscope (SEM). The changes in were analyzed. As a result of the acid/alkali environment exposure test of PET fiber, the strength retention rate was 83.4~96.4% in acidic environment and 42.4~97.9% in alkaline environment. It was confirmed that the strength retention rate of the fiber itself significantly decreased when exposed to high-temperature strong alkali conditions, and the strength retention rate increased in the finished yarn coated with epoxy. In the test results of the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture, no reduction in flexural strength was found, and the equivalent flexural strength result also did not show any degradation in performance as a fiber reinforcement. Even in the SEM analysis results, no surface damage or cross-sectional change of the PET reinforcing fibers was observed. These results mean that no damage or cross-section reduction of PET reinforcing fibers occurs in cement concrete environments even when fiber-reinforced concrete is exposed to high temperatures in the early stage or depending on age, and the strength of PET fibers decreases in cement concrete environments. The impact is judged to be of no concern. As the flexural strength and equivalent flexural strength according to age were also stably expressed, it could be seen that performance degradation due to hydrolysis, which is a concern due to the use of PET fiber reinforcing materials, did not occur, and it was confirmed that stable residual strength retention characteristics were exhibited.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.2
• /
• pp.83-90
• /
• 2023

The β-Ga₂O₃ has the most thermodynamically stable phase, a wide band gap of 4.8~4.9 eV and a high dielectric breakdown voltage of 8MV/cm. Due to such excellent electrical characteristics, this material as a power device material has been attracted much attention. Furthermore, the β-Ga₂O₃ has easy liquid phase growth method unlike materials such as SiC and GaN. However, since the grown pure β-Ga₂O₃ single crystal requires the intentionally controlled doping due to a low conductivity to be applied to a power device, the research on doping in β-Ga₂O₃ single crystal is definitely important. In this study, various source powders of un-doped, Sn 0.05 mol%, Sn 0.1 mol%, Sn 1.5 mol%, Sn 2 mol%, Sn 3 mol%-doped Ga₂O₃ were prepared by adding different mole ratios of SnO₂ powder to Ga₂O₃ powder, and β-Ga₂O₃ single crystals were grown by using an edge-defined Film-fed Growth (EFG) method. The crystal direction, crystal quality, optical, and electrical properties of the grown β-Ga₂O₃ single crystal were analyzed according to the Sn dopant content, and the property variation of β-Ga₂O₃ single crystal according to the Sn doping were extensively investigated.

• Journal of Navigation and Port Research
• /
• v.47 no.3
• /
• pp.147-154
• /
• 2023

This study aims to determine the necessity, role, utilization, and operation and management plan in relation to the underwater space platform where humans can newly reside. It provides a comprehensive opinion on the need for creating undersea space and operation plans based on opinions of industry-university-affiliated organizations involved in the R&D project of the Ministry of Maritime Affairs and Fisheries for the utilization of undersea space and external experts participating in marine technology development. In this study, a survey was conducted on researchers participating in the construction of a Korean submarine space platform. FGI was conducted on marine technology development experts. Results were then derived. As a result of the analysis, the need for subsea space construction was found to be high. As for the role of subsea space, the most common opinion was to develop technology for utilizing subsea space and to secure marine science research functions. It was found that the creation of subsea space would have a positive impact on the domestic industry, especially the deep-sea development industry and the shipbuilding/offshore structure industry. In terms of utilization, after the end of the seabed space test bed, the response to utilization as a marine observation base and marine ecosystem research had the highest proportion. As for expected inconvenience, discomfort in the psychological environment was the highest. Experts suggest that securing a continuous budget is most important for stable operation in the future and that securing a manpower budget is essential for itemized budgets. In addition, it was judged that it would be appropriate to establish a prior agreement from the time of the prior agreement and prepare a countermeasure before proceeding with the project in order to ensure ownership issues, consignment management issues, and cost issues when using the project after the end of the project.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.523-531
• /
• 2010

A dam is effective in stable supply of water required in daily life and reduced damage from floods, but there are problems as a lot of land or houses are submerged. Therefore many projects have been conducted in order to improve and support daily life environment surrounding a dam. This study has focused on analyzing how to calculate support working expenses for Dam area by using GIS spatial overlay in addition to effects of scale of a topographic map and reached the following conclusion. First, as a result of areal error in submerged area by scale based on a 1/3,000 digital topographic map, it has been found that a 1/5,000 digital topographic map is 9.5 times more accurate than a 1/25,000 digital topographic map in the total of areal error. Second, as a result of areal error in area surrounding a dam, it has been found that a 1/5,000 digital topographic map is 7.4 times more accurate than a 1/25,000 digital topographic map in the total of areal error. Third, as a result of error of support expense for submerged area, it has been found that a 1/5,000 digital topographic is 15.9 times, 14.7 times and 15.9 times more effective than a 1/25,000 digital topographic map in terms of the total error of support expense, standard error and the total support expense error on the entire project costs in submerged area. In addition, as a result of analysis on error of support expense for area surrounding a dam, it has been found that a 1/5,000 digital topographic map was 10.7 times, 9.6 times and 10.6 times more effective, respectively, in the total error of support expense, standard error and the total error of support expense for the entire project costs in area surrounding a dam compared to a 1/25,000 digital topographic map. Lastly, as a result of error of the entire project costs for area surrounding a dam, it has been found that a 1/5,000 digital topographic map was 1.4 times, 1.3 times and 1.4 times more effective, respectively, in the total error of support expense, standard error and the total error of the entire project costs compared to a 1/25,000 digital topographic map, but it was not much different from the result of calculating areal error in submerged area or area surrounding a dam because population item didn't consider areal concept.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.475-481
• /
• 2019

The soybean cultivar 'Neulchan' was developed for production of soy-paste and tofu. SS91501-9-1-1 and SS96205 (F₂) were crossed in 1998, and F₃ to F₇ were selected by the pedigree method. A preliminary yield trial (PYT) and an advanced yield trial (AYT) were conducted from 2006 to 2008, and a regional yield trial (RYT) in nine regions was conducted from 2009 to 2011. In the RYT, 'Neulchan' was stable in variable environments and generated high yield. 'Neulchan' was determinate with white flower, light brown pod color, yellow spherical seed, and yellow hilum. Its flowering date and maturity date were Jul. 30 and Oct. 9, respectively. The plant height was shorter than that of 'Daewonkong' (a standard cultivar). 'Neulchan' had the same node number (14), higher first-pod height (12 cm), and lighter seed weight (21.7 g/100-seed weight) than those of 'Daewonkong' (14, 11, and 24.2 g/100-seed weight, respectively). 'Neulchan' had high resistance to bacterial pustule, and its resistance to soybean mosaic virus was similar to that of 'Daewonkong'. The yield and color of 'Neulchan' tofu were similar to those of 'Daewonkong' tofu, but the hardness was lower than that of 'Daewonkong' tofu. The soybean malt scent, fermented soybean yield, and γ-polyglutamic acid (γ-PGA) of 'Neulchan' were 3, 215%, and 24.6 mg/g, respectively. Its yield in adaptable regions was 307 kg/10a, higher than that of 'Daewonkong'. 'Neulchan' was expected to be cultivated and used widely for soy-paste and tofu production. (Registration No. 4904).

• 재활복지
• /
• v.14 no.3
• /
• pp.225-256
• /
• 2010

This study aims to provide the basic data of the rehabilitation program for the schoolchild with intellectual disability by designing new framework of the features of postural control for the schoolchild with intellectual disability. For this, the study investigated what sensations the schoolchild are using to maintain posture by selectively or synthetically applying vision, vestibular sensation and somato-sensation, and how the coordinative sensory system of the schoolchild is responding to any sway referenced sensory stimulus. The study intended to prove the limitation of motor system in estimating the postural stability by providing the cognitive motor task, and provided the features of postural control of the schoolchild with intellectual disability by measuring the onset times and orders of muscle contraction of neuron-muscle when there is a postural control taking place due to the exterior disturbance. Furthermore, by comparatively analyzing the difference between the normal schoolchild and the intellectually disabled schoolchild, this study provided an optimal direction for treatment planning when the rehabilitation program is applied in the postural control ability training program for the schoolchild with intellectual disability. Taking gender and age into consideration, 52 schoolchild including 26 normal schoolchild and 26 intellectually disabled schoolchild were selected. To measure the features of postural control, CTSIB test, and postural control strategy test were conducted. The result of experiment is as followed. First, the schoolchild with intellectual disability showed different feature in using sensory system to control posture. The normal schoolchild tended to depend on somato-sensory or vision, and showed a stable postural control toward a sway referenced stimulus on somato-sensory system. The schoolchild with intellectual disability tended to use somato-sensory or vision, and showed a very instable postural control toward a sway referenced vision or a sway referenced stimulus on somato-sensory system. In sensory analysis, the schoolchild with intellectual disability showed lower level of proficiency in somato-sensation percentile, vision percentile and vestibular sensation percentile compare to the normal schoolchild. Second, as for the onset times and orders of muscle contraction for strategies of postural control when there is an exterior physical stimulus, the schoolchild with intellectual disability showed a relatively delayed onset time of muscle control, and it was specially greater when the perturbation is from backward. As for the onset orders of muscle contraction, it started from muscles near coax then moved to the muscles near ankle joint, and the numbers and kinds of muscles involved were greater than the normal schoolchild. The normal schoolchild showed a fast muscle contracting reaction from every direction after the perturbation stimulus, and the contraction started from the muscles near the ankle joint and expanded to the muscles near coax. From the results of the experiments, the special feature of the postural control of the schoolchild with intellectual disability is that they have a higher dependence on vision in sensory system, and there was no appropriate integration of swayed sensation observed in upper level of central nerve system. In the motor system, the onset time of muscle contraction for postural control was delayed, and it proceeded in reversed order of the normal schoolchild. Therefore, when use the clinical physical therapy to improve the postural control ability, various sensations should be provided and should train the schoolchild to efficiently use the provided sensations and use the sensory experience recorded in upper level of central nerve system to improve postural control ability. At the same time, a treatment program that can improve the processing ability of central nerve system through meaningful activities with organizing and planning adapting reaction should be provided. Also, a proprioceptive motor control training program that can induce faster muscle contraction reaction and more efficient onset orders from muscularskeletal system is need to be provided as well.

• Korean Journal of School Psychology
• /
• v.16 no.3
• /
• pp.433-451
• /
• 2019

This study aimed to develop and validate the Classroom Problem Behavior Scale - Elementary School Version (CPBS-E) measure which is unique to classroom problem behavior exhibited by Korean elementary school students. The focus was on developing a universal screening instrument designed to identify and provide intervention to students who are at-risk for severe social-emotional and behavioral problems. Items were initially drawn from the literature, interviews with elementary school teachers, common office discipline referral measures used in U.S. elementary schools, penalty point systems used in Korean schools, 'Green Mileage', and the Inventory of Emotional and Behavioral Traits. The content validity of the initially developed items was assessed by six classroom and subject teachers, which resulted in the development of a preliminary scale consisting of 63 two-dimensional items (i.e., Within Classroom Problem Behavior and Outside of Classroom Problem Behavior), each of which consisted of 3 to 4 factors. The Within Classroom Problem Behavior dimension consisted of 4 subscales (not being prepared for class, class disruption, aggression, and withdrawn) and the Outside of Classroom Problem Behavior dimension consisted of 3 subscales (rule-violation, aggression, and withdrawn). The CPBS-E was pilot tested on a sample of 154 elementary school students, which resulted in reducing the scale to 23 items. Following the scale revision, the CPBS-E was validated on a sample population of 209 elementary school students. The validation results indicated that the two-dimensional CPBS-E scale of classroom problem behavior was a reliable and valid measure. The test-retest reliability was stable at above .80 in most of the subscales. The CPBS-E measure demonstrated high internal consistency of .76-.94. In examining the criterion validity, the scale's correlation with the Teacher Observation of Classroom Adaptation-Checklist (TOCA-C) was high and the aggression and withdrawn subscales of the CPBS-E demonstrated high correlations with externalization and internalization, respectively, of the Child Behavior Checklist - Teacher Report Form CBCL-TRF). In addition, the factor structure of the CPBS-E scale was examined using the structural equation model and found to be acceptable. The results are discussed in relation to implications, contributions to the field, and limitations.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.3
• /
• pp.278-285
• /
• 2019

The experiment was implemented to gain basic data for stable proso millet (Panicum miliaceum L.) production through germination viability and establishment uniformity based on seed refining under seed selection with specific gravity of proso millet seed. Seeds of three proso millet cultivars were carefully selected by adjusting NaCl into 9 levels (1.000, 1.005, 1.010, 1.015, 1.020, 1.025, 1.030, 1.035, 1.04 g·L^-1), and their standard germination rate, seeding quality and field emergence rate were investigated. Proso millets showed heavier thousand seed weight as specific gravity high. In standard germination, all of the 3 cultivars of selected seeding showed at least 91% germination rate. With respect to the 1.040 g·L^-1 selection by specific gravity, 'Hwanggeum' had 98.9%, 'Ibaekchal', 99.4%, and 'Hwangsilchal', 98.9%, recording the highest. Seeding quality was investigated and it was found that, compared with the non-selected seeds, selected seeds had longer plant heights and averaged 2.0, 2.2 and 1.9 cm, respectably. In terms of leaf length, only 'Hwanggeum' and 'Ibaekchal' showed distinctive differences. No significance was found in stem diameter and SPAD. The seeds selected using specific gravity all had longer or heavier average root length, root weight and stem weight. Compared with non-selected seeds, the specific gravity of 1.040 g·L^-1 had longer root lengths of 2.9, 3.0 and 2.9 cm. 1.040 g·L^-1 was also found to have the heaviest root weight, and stem weight. The field emergence viability investigation found significance solely in the mean emergence time (MET) by the cultivar. High significance was found in percent emergence (PE) and emergence rate index (ERI) in the specific gravity for the selection of seeds. All of the three cultivars showed higher PE and ERI as specific gravity selection high. The 1.040 g·L^-1 specific gravity selection had the highest PE of 90.7, 85.3 and 92.8%. For productivity increase based on improved proso millet germination rate and enhanced establishment uniformity, it seems favorable to employ 1.040 g·L^-1 specific gravity selection using salt solution.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.19-19
• /
• 2022

Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha^-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.902-909
• /
• 2023

This study evaluated the performance test of a small-sized LTE-Maritime(LTE-M) transceiver that was developed and promoted to expand the use of intelligent maritime traf ic information services led by the Ministry of Oceans and Fisheries with the aim of supporting the prevention of maritime accidents. Accoriding to statistics, approximately 30% of all marine accidents in Korean water occur with ships weighing less than 3 tons. Therefore, the blind spots of maritime safety must be supplemented through the development of small-sized transceivers. The small transceiver may be used in fishing boats that are active near coastal waters and in water leisure equipment near the coastline. Therefore, verifying whether sufficient performance and stable communication quality are provided is necessary, considering the environment of their real usage. In this study, we reviewed the communication quality goals of the LTE-M network and the performance requirements of small-sized transceivers suggested by the Ministry of Oceans and Fisheries, and proposed a test plan to appropriately evaluate the performance of small-sized transceivers. The validity of the proposed test method was verified for six real-sea areas with a high frequency of marine accidents. Consequently, the downlink and uplink transmission speeds of the small-sized LTE-M transceiver showed performances of 9 Mbps or more and 3 Mbps or more, respectively. In addition, using the coverage analysis system, coverage of more than 95% and 100% were confirmed in the intensive management zone (0-30 km) and interesting zone (30-50 km), respectively. The performance evaluation method and test results proposed in this paper are expected to be used as reference materials for verifying the performance of transceivers, contributing to the spread of government-promoted e-navigation services and small-sized transceivers.