• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.505-511
• /
• 1997

The effects of sintering atmospheres(air, O2, N2) on the sintering and microwave dielectric properties of (1-x)CaTiO3-xLaAlO3 system was investigated. The sintered density of (1-x)CaTiO3-xLaAlO3 under air atmosphere increased linearly with increasing x, but it decreased in the range of x>0.5 under O2 atmosphere and x>0.6 under N2 atmosphere in spite of the increament of the smaller La(1.06$\AA$) and Al(0.5 $\AA$) ion than Ca(0.99$\AA$) and Ti(0.6$\AA$). In case of the air sintering atmosphere of (1-x)CaTiO3-xLaAlO3 the two phases of orthorhombic and rhombohedral crystal system were coexisting, and the XRD peak of rhombohedral crystalsystem was to be higher with increasing x. However, the sintering atmosphere of O2 and N2 made the monophasic crystal system of orthorhombic keep up by x=0.5 and x=0.6, respectively, and it transformed to pseudo-cubic crystal system in x>0.5 and x>0.6. The XRD peak intensity of (1-x)CaTiO3-xLaAlO3 was to be gradually higher with increasing x under the air atmosphere of sintering. Whereas, its XRD peak intensity increased till x=0.6 but decreased with increasing x in the range of x>0.6 under O2 and N2 atmosphere. The relative dielectric constant of (1-x)CaTiO3-xLaAlO3 sintered under air atmosphere decreased linearly and the Q.f0 value increased according as x increased. On the other hand, the relative dielectric constant of (1-x)CaTiO3-xLaAlO3 under O2 and N2 atmosphere decreased in the range of x$\leq$0.5 with increasing x, but increased rapidly in the range of x$\geq$0.6. And the Q.f0 value increased till x=0.6 but decreased in the range of x>0.6 with increasing x. The temperature coefficient of resonant frequency had no relation to sintering atmosphere.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.629-635
• /
• 1997

The effects of the annealing atmospheres(O2, N2) and sintering additives that Bi2O3 is a major composition on the microwave dielectric and sintering propertie of (1-x)CaTiO3-xLaAlO3 system were investigated. The annealing atmospheres and the increase of annealing time after sintering did not affect the relative dielectric constant($\varepsilon$r) and temperature coefficient of resonant frequency($\tau$f) of (1-x)CaTiO3-xLaAlO3 system. However, the Q.f0 values of (1-x)CaTiO3-xLaAlO3 were very sensitive to annealing atmospheres. As the annealing time increased under O2 atmosphere the Q.f0 values of (1-x)CaTiO3-xLaAlO3 enhanced untill 10 hrs in 0.3$\leq$x$\leq$0.6 region, but degraded over that time. The increasing rate of Q.f0 value increased wth increasing x. On the other hand, as the annealing time increased under N2 atmosphere the Q.f0 values were constant in x$\leq$0.6 region, increased gradually in x$\geq$0.7 region. When 0.97Bi2O3-0.03Al2O3 and 0.76Bi2O3-0.24NiO of 3wt% as sintering additives were added to (Ca0.5La0.5) (Ti0.5Al0.5)O3 (x=0.5) the sintering temperature of 1$600^{\circ}C$ was lowered to 140$0^{\circ}C$, and the relative dielectric constant($\varepsilon$r) and temperature coefficient of resonant frequency($\tau$f) were not nearly changed. The addition of 0.97Bi2O3-0.03Al2O3 and 0.76Bi2O3-0.24NiO of 3wt% to (Ca0.5La0.5)(Ti0.5Al0.5)O3 made the Q.f0 values to be lower about 15% and 34%, respectively.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1031-1033
• /
• 1995

The microwave dielectric properties of (1-x)$LaAlO_3-xCaTiO_3$ system were investigated. As the amount of $LaAlO_3$ increased, the value of the unloaded Q increased, but the dielectric constant(${\varepsilon}_r$) decreased. The temperature coefficient of resonant frequency(${\tau}_f$) of $5ppm/^{\circ}C$ was obtained from the composition of $0.35LaAlO_3-0.65CaTiO_3$ in which the values of ${\varepsilon}_r$ and $Q{\cdot}f_o$ were 42 and 32,500, respectively.

• Electrical & Electronic Materials
• /
• v.9 no.4
• /
• pp.379-384
• /
• 1996

The microwave dielectric properties of (I-x)CaTiO$_{3}$-xLaAIO$_{3}$ were investigated. The solid solution of (1-x)CaTiO$_{3}$-xLaAIO$_{3}$ had the perovskite structure in the range of all compositions. The crystal system of (1-x)CaTiO$_{3}$-xLaAIO$_{3}$ was transformed to orthorhombic(x.leq.0.4), psudo-cubic(x=0.5), and rhombohedral (x.geq.0.7) in turn, as the amount of LaAIO$_{3}$ increased. The dielectric constant and temperature coefficient of resonant frequency of solid solution were decreased with the content of LaAIO$_{3}$, whereas, the value of Q . f$_{o}$ was increased. The microwave dielectric material having Q . f$_{o}$ = 32, 500, .epsilon.$_{r}$ = 42, and .tau.$_{f}$ = 5 ppm/.deg. C was obtained from the 0.35CaTiO$_{3}$-0.65LaAIO$_{3}$ composition sintered at 1600.deg. C for 4hrs.hrs.hrs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.171.2-171.2
• /
• 2016

The 2-dimensiona electron gas (2DEG) layers have opened tremendous interests in the heterooxide interfaces formed between two insulating materials, especially between LaAlO3 and $SrTiO_3$. The 2DEG layers exhibit extremely high mobility and carrier concentrations along with metallic transport phenomena unlike the constituent oxide materials, i.e., $LaAlO_3$ and $SrTiO_3$. The current work inserted artificially the interfacial layer, $Sr_xCa_{1-x}TiO_3$ between $LaAlO_3$ and $SrTiO_3$, with the aim to controlling the 2-dimensional transports. The insertion of the additional materials affect significantly their corresponding electrical transports. Such features have been probed using DC and AC-based characterizations. In particular, impedance spectroscopy was employed as an AC-based characterization tool. Frequency-dependent impedance spectroscopy have been widely applied to a number of electroceramic materials, such as varistors, MLCCs, solid electrolytes, etc. Impedance spectroscopy provides powerful information on the materials system: i) the simultaneous measurement of conductivity and dielectric constants, ii) systematic identification of electrical origins among bulk-, grain boundary-, and electrode-based responses, and iii) the numerical estimation on the uniformity of the electrical origins. Impedance spectroscopy was applied to the $LaAlO_3/Sr_xCa_{1-x}TiO_3/SrTiO_3$ system, in order to understand the 2-dimensional transports in terms of the interfacial design concepts. The 2-dimensional conduction behavior system is analyzed with special emphasis on the underlying mechanisms. Such approach is discussed towards rational optimization of the 2-dimensional nanoelectronic devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.188.2-188.2
• /
• 2015

The presence of the conduction interface in epitaxial $LaAlO_3/SrTiO_3$ thin films has opened up challenging applications which can be expanded to next-generation nano-electronics. The metallic conduction path is associated with two adjacent insulating materials. Such device structure is applicable to frequency-dependent impedance spectroscopy. Impedance spectroscopy allows for simultaneous measurement of resistivity and dielectric constants, systematic identification of the underlying electrical origins, and the estimation of the electrical homogeneity in the corresponding electrical origins. Such unique capability is combined with the intentional control on the interface composition composed of $SrTiO_3$ and $CaTiO_3$, which can be denoted by $SrxCa1-_xTiO_3$. The underlying $Sr_xCa1-_xTiO_3$ interface was deposited using pulsed-laser deposition, followed by the epitaxial $LaAlO_3$ thin films. The platinum electrodes were constructed using metal shadow masks, in order to accommodate 2-point electrode configuration. Impedance spectroscopy was performed as the function of the relative ratio of Sr to Ca. The respective impedance spectra were analyzed in terms of the equivalent circuit models. Furthermore, the impedance spectra were monitored as a function of temperature. The ac-based characterization in the 2-dimensional conduction path supplements the dc-based electrical analysis. The artificial manipulation of the interface composition will be discussed towards the electrical application of 2-dimensional materials to the semiconductor devices in replacement for the current Si-based devices.

• Economic and Environmental Geology
• /
• v.30 no.1
• /
• pp.35-49
• /
• 1997

The coal formation of the Deokpyeong area are interbedded along metapelites of the Ogcheon Supergroup, which are composed mainly of graphite, quartz, muscovite and associated with small amounts of biotite, chlorite, pyrite and barite. The ratios of $SiO_2/Al_2O_3$, $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ of the coaly metapelite are variable and wide range from 1.80 to 10.21, from 27.8 to 388.8 and from 7.6 to 61.8, respectively. These coal formation were deposited in basin of marine environments, and the REE of these rocks are not influenced with metamorphism and hydrothermal alterations on the basis of $Al_2O_3$ versus La, La against Ce, the ratios of La/Ce (0.19 to 0.99) and Th/U (0.02 to 4.75). These rocks also show much variation in $La_N/Yb_N$ (1.19 to 22.89), Th/Yb (0.14 to 21.43) and La/Th (0.44 to 13.67), and their origin is explained by derivation from a mixture of sedimentary and igneous rocks. The wide range in trace and REE element characteristics as Co/Th (0.12 to 2.78), La/Sc (0.33 to 10.18), Sc/Th (0.57 to 5.73), V/Ni (8 to 2347), Cr/V (0.02 to 0.67) and Ni/Co (1.56 to 32.95) of these coaly metapelites argues for inefficient mixing of the various source lithologies during sedimentation. Deep to pale green barium-vanadium muscovites (vanadium-oellacherite) have been found in this coal formations. Modes of occurrence and grain size of muscovite are heterogeneous, but most of the barium and vanadium-bearing muscovites occur along the boundaries between graphite and quartz grains, ranging from 200 to $350{\mu}m$ in length and from 40 to $60{\mu}m$ in width. Results of X-ray diffraction data of the minerals characterized to be monoclinic system with $a=5.249{\AA}$, $b=8.939{\AA}$, $c=20.924{\AA}$ and ${\beta}=95.894^{\circ}$. Representative chemical formula of the muscovite was $(Na_{0.09}K_{1.44}Ba_{0.46})(Al_{2.75}Ti_{0.07}V_{0.56}Fe_{0.08}Mg_{0.50})(Si_{6.12}Al_{1.88})O_{22}$. The V possibly substitute octahedral Al, and the Ba is coupled substitution of $K^+Si^{4+}=Ba^{2+}Na^+Ca^{2+}$, which compositional ranges of V and Ba are from 0.42 to 0.69 and from 0.34 to 0.56 based on $O_{22}$, respectively. Formation mechanism of the barium-vanadium muscovites in the coaly metapelite is shown that the formed by high pressure and temperature from regional metamorphism origanated during diagenesis at the interface between a basinal brine and organic matter.