• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.7-12
• /
• 2019

Generally, end effectors for automatic robots can use ceramics such as alumina(Al₂O₃) and silicon carbide(SiC). In this study, black alumina was developed and used in the semiconductor field through powder molding press forming. The black alumina can be mass produced.Alumina and black alumina were ground using a plane grinder to apply to the end effector of an automatic robot. The optimal cutting conditionswere found by analyzing the surface roughness(Ra) of black alumina through grinding. The alumina surface roughness is the feed rate was about 0.72 mm/sec, and the number of revolutions was best at 0.4879 ㎛ at 1700 rpm. In addition, the black alumina surface roughness shows a precision of less than 0.2 ㎛ in most cutting conditions. The feed rate was about 0.72 mm/sec, and the number of revolutions was best at 0.1361 ㎛ at 1900 rpm. The surface roughness of black alumina was better than that of alumina by about 0.35 to 0.47 ㎛.

• Nutrition Research and Practice
• /
• v.11 no.5
• /
• pp.357-364
• /
• 2017

BACKGROUND/OBJECTIVES: Oxidative stress is closely related with inflammation and development of many diseases. Black soybean seed coat contains high amount of anthocyanins, which are well-known for free radical scavenging activities. This study investigated inflammatory response and action mechanism of black soybean anthocyanins with regard to antioxidant activity in lipopolysaccharide (LPS)-stimulated RAW 264.7 cells. MATERIALS/METHODS: RAW 264.7 cells were treated with anthocyanins extracted from black soybean seed coats in a concentration range of 12.5 to $100{\mu}g/mL$. The production of reactive oxygen species (ROS), secretion of pro-inflammatory mediators and cytokines, and the signaling in the mitogen activated protein kinases (MAPKs) pathway were examined. RESULTS: Black soybean anthocyanins significantly decreased LPS-stimulated production of ROS, inflammatory mediators such as nitric oxide (NO) and prostaglandin $E_2$, and pro-inflammatory cytokines, including tumor necrosis factor ${\alpha}$ and interleukin-6, in a dose-dependent manner without cytotoxicity (P < 0.001). Black soybean anthocyanins downregulated the expression of inducible NO synthase and cyclooxygenase-2 in LPS-stimulated RAW 264.7 cells (P < 0.001). Moreover, black soybean anthocyanins inhibited LPS-induced phosphorylation of MAPKs, including extracellular signal-regulated kinase, c-Jun N-terminal kinase, and p38 (P < 0.001). CONCLUSION: These results suggest that black soybean anthocyanins exert anti-inflammatory activity by inhibiting ROS generation and subsequent MAPKs signaling, thereby inhibiting inflammatory responses.

• Korean Journal of Materials Research
• /
• v.27 no.2
• /
• pp.63-68
• /
• 2017

A black nickel oxide powder, one of the commercial nickel oxide ores, was reduced by hydrogen gas in a batch-type fluidized-bed reactor in a temperature range of 350 to $500^{\circ}C$ and in a residence time range of 5 to 120 min. The hydrogen reduction behavior of the black nickel oxide was found to be somewhat different from that of green nickel oxide ore. For the black nickel oxide, the maximum temperature (below which nickel oxide particles can be reduced without any agglomeration) was significantly lower than that observed for the green nickel oxide. In addition, the best curve fittings of the Avrami model were obtained at higher values of the overall rate constant "k" and at lower values of the exponent "m", compared to those values for the green nickel oxide. It may be inferred from these results that the hydrogen reduction rate of the black nickel oxide is faster than that of the green nickel oxide in the early stages, but the situation reverses in the later stages. For the black nickel oxide ore, in spite of the low temperature sintering, it was possible to achieve a high degree fluidized-bed reduction at lower temperatures and at lower gas consumption rates than was possible for the green nickel oxide. In this regard, the use of black nickel oxide is expected to yield a benefit if its ore price is sufficiently lower than that of the green nickel oxide.

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.495-508
• /
• 1996

This study had three purposes: (1) to investigate dispersion and enrichment level of potentially toxic elements; (2) to identify uranium-bearing minerals in black shales; and (3) to assess the chemical speciation of heavy metals in soils and sediments. Rock, surface soil and stream sediment samples were collected in the Chungjoo area covered with black shales in Korea. These samples were analyzed for multi-elements using INAA and ICP-AES. The maximum abundance of U in black shales is 56 ppm and radioactivity counts up to 240CPM. Molybdenum, V, Ba, Cu, and Pb are enriched in black shales and most of soils show high concentrations of U, Mo, Ba, Cu, Pb and Zn. Concentrations of potentially toxic elements decrease in the order of mountain soil > farmland soil > paddy soil. Enrichment index of soils and sediments are calculated and higher than 1.0 in the black shale area with the highest value of 6.1. In order to identify U-bearing minerals, electron probe micro analysis was applied, and uraninite and brannerite in black shale were found. Uraninite grains are closely associated with monazite or pyrite with the size of $2{\mu}m$ to $10{\mu}m$ in diameter whereas brannerite occurs as $50{\mu}m$ euhedral grains. With the results of sequential extraction scheme, residual fractions of Cu, Pb and Zn in soils are mainly derived from weathering of black shale but Cu, Pb and Zn in sediments are present as non-residual fractions. Lead is predominantly present as oxidizable phase in soils whereas Zn is in exchageable/water-acid soluble phase in sediments.

• Food Science of Animal Resources
• /
• v.39 no.3
• /
• pp.402-409
• /
• 2019

Jeju black cattle are known as one of Korea's traditional cattle. However, Hanwoo is more well-known to Korean meat consumers as representative beef cattle. Despite the popularity of these two breeds, comparison of the nutritional characteristics between Jeju black cattle and Hanwoo have not been studied. Here, we compared the fatty acid and amino acid characteristics between two Korean traditional cattle and Wagyu breeds. A total of 62 cattle were used in this study. The Jeju black cattle beef had significantly higher unsaturated fatty acids than Hanwoo (p<0.05). Savory fatty acids, including oleic acid were also higher than in Hanwoo cattle (p<0.05). The negative flavor fatty acids, such as palmitic acid were significantly lower than in Hanwoo (p<0.001). On the other hand, linoleic acid which imparts a negative flavor was higher than Hanwoo (p<0.05). Amino acids, including alanine and glutamine, usually representative of the umami taste were present in significantly higher proportions in Jeju black cattle (p<0.05). In addition, bitter tasting amino acids, including valine, leucine, isoleucine, and methionine were lower in Jeju black cattle beef than in Hanwoo (p<0.05, p<0.001, p<0.001, and p<0.001 each). Taken together, our results suggest that Jeju black cattle beef had higher savory flavor and umami taste which affected consumers preference for the meat.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.49-56
• /
• 2021

In this study, using strontium sulfate (SrSO₄) recovered from magnetite ore in Hongcheon, the Black Ash process was used to produce strontium carbonate (SrCO₃). In the carbothermic reaction step, SrSO₄ was reacted with carbon (C) at 1273 K under Ar gas atmosphere using a gas-tight quartz reactor to produce strontium sulfide (SrS). Afterward, water leaching of the residues produced from the carbothermic reaction at 353 K and carbonation of the leaching solution using sodium carbonate (Na₂CO₃) at 298 K were conducted to produce SrCO₃. The results of this study demonstrate the feasibility of the production of SrCO₃ via the Black Ash process using domestic magnetite ore containing strontium (Sr).

• Particle and aerosol research
• /
• v.13 no.2
• /
• pp.97-104
• /
• 2017

In order to characterize atmospheric aerosols in Chungcheong area, black carbon concentration, which is known to be closely related to global warming, was measured and compared with $PM_{10}$, $PM_{2.5}$ concentrations and various meteorological parameters such as wind velocity and wind direction. Multi Angle Absorption Photometer (MAAP), a filter-based equipment, was used for the black carbon measurement, and the $PM_{10}$, $PM_{2.5}$ concentrations, wind velocity and wind direction were provided by the local monitoring stations. Black carbon concentration was monitored to be high in spring and winter but low in fall. $PM_{10}$ concentration was observed to be high when westerly wind was strong.

• Economic and Environmental Geology
• /
• v.9 no.3
• /
• pp.157-163
• /
• 1976

In this study, the oil bearing rock-sequence, U-hand-ri Formation (D.S. Lee et al., 1976), was subdivided into three members; the lower, the intermediate and the upper. The lower consists mainly of reddish purple tuff and sandy calcareous shales, the intermediate of an alternation of tuffs, sandstons, calcareous black shales, cherts and limestone and the upper of coarse grained variegated tuff and agglomerate. Oily matter was found from the black shales of the intermediate. Ten samples of black shales from drilled cores, 8 samples of black shales from different outcrops of the member, and 1 sample of grease-like seeping oil from black shales at U-hang-ri coast were chemically analyized. Among them, 9 samples contain remarkable amount of organic carbon (0.96~1.60%) and E.O.M. extract (0.176~0.718%), and mostly the bituminous material is saturated hydrocarbons as well as shown in infared spectroscopic analyses. The elemental analyses of MAE extracts and asphaltenes of some of thoese samples indicate that the transformation of organic material to crude oil is highly progressed. The authors suggest that the seeping oil and oily tinges in black shale layers are the products of natural cracking related with the igneous activities in the area nearby.

• Elastomers and Composites
• /
• v.7 no.1
• /
• pp.21-37
• /
• 1972

We have studied the blending effects of Diene NF 35R and Turfdene 1000R at various blending ratios 100/0, 70/30, 50/50, 30/70, 0/100, and of carbon black NAF and ISAF at various compounding ratios of 55 PHR, 65PHR, 75PHR for tyre tread rubber. As the results, it was found that; 1. For tyre tread rubber, as the blending ratio, Diene NF 35R/Turfdene 1000R, indicated 30/70, the physical properties we examined were most excellent. 2. Excellent result was obtained in case of carbon black compounding ratio of 63PHR. The compounding of ISAF made better result than that of HAF for tensile strength, tearing strength, and abrasion quantity. 3. Heat buildup obtained from compounding carbon black HAF indicated low temperature than that from compounding carbon black ISAF. As the compounding amount of carbon black increased, the heat buildup improved, and as the blending amount of Diene NF 35R decreased, the heat buildup dropped. 4. Carbon black was more efficient to Turfdene 1000R than to Diene NF 35R. 5. In this pysical properties, mooney viscosity, and mooney scorch time, as the compounding amount of carbon black increased, the values of mooney viscosity increased, but that of mooney scorch time dropped.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.709-714
• /
• 2019

In order to observe the microstructure and morphology of porous titanium -oxide thin film, deposition is performed under a higher Ar gas pressure than is used in the general titanium thin film production method. Black titanium thin film is deposited on stainless steel wire and Cu thin plate at a pressure of about 12 Pa, but lustrous thin film is deposited at lower pressure. The black titanium thin film has a larger apparent thickness than that of the glossy thin film. As a result of scanning electron microscope observation, it is seen that the black thin film has an extremely porous structure and consists of a separated column with periodic step differences on the sides. In this configuration, due to the shadowing effect, the nuclei formed on the substrate periodically grow to form a step. The surface area of the black thin film on the Cu thin plate changes with the bias potential. It has been found that the bias of the small negative is effective in increasing the surface area of the black titanium thin film. These results suggest that porous titanium-oxide thin film can be fabricated by applying the appropriate oxidation process to black titanium thin film composed of separated columns.