Browse > Article
http://dx.doi.org/10.12989/acc.2021.12.3.227

Frost resistance of layered concrete systems incorporating ECC as overlay materials  

Yucel, Hasan E. (Department of Civil Engineering, Nigde Omer Halisdemir University)
Publication Information
Advances in concrete construction / v.12, no.3, 2021 , pp. 227-241 More about this Journal
Abstract
Concrete structures are subjected to severe durability issues and freeze-thaw action is one of these detrimental issues. In this paper, the behavior of high-volume Class-F fly ash (FA) and slag (SL) incorporated Engineered Cementitious Composites (ECC) as overlay materials was assessed when they were under cyclic freezing and thawing effect. Silica fume concrete (SFC) was also tested as a control mixture which is generally used for overlaying purposes. Layered ECC/substrate concrete (SC) and SFC/SC beam specimens were produced and subjected to 300 freeze-thaw cycles in accordance with ASTM C666, Procedure A. Laboratory tests performed using the layered specimens were based on the determination changes of (i) residual mechanical properties (flexural strength -mid-span beam deflection curves), (ii) ultrasonic pulse velocity (UPV), (iii) mass loss, (iv) relative dynamic modulus of elasticity (RDME) and (v) durability factor (DF). Test results show that all layered specimens produced with different ECC mixtures safely survived 300 freeze-thaw cycles without any disturbance between the ECC overlay and SC interface. On the other hand, one out of six tested SFC/SC layered specimens survived 300 freeze-thaw cycles and final failure for five failed specimens took place from the interfacial planes. Significantly better frost resistance of overlaid systems produced with ECCs than those with SFC was also verified with all of the tests proposed. Between different ECC mixtures, those produced with slag performed better than that those with Class-F fly ash.
Keywords
engineered cementitious composites (ECC); frost resistance; layered concrete system; mechanical properties;
Citations & Related Records
연도 인용수 순위
  • Reference
1 ASTM C666-97 (2002), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, USA.
2 MDOT Bridge Design Manual (2009), Michigan Department of Transportation.
3 Tayeh, B.A., Bakar, B.H.A., Johari, M.A.M. and Voo, Y.L. (2012), "Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay", Constr. Build. Mater., 36, 538-548. https://doi.org/10.1016/j.conbuildmat.2012.06.013.   DOI
4 Turk, K. and Kina, C. (2018), "Freeze-thaw resistance and sorptivity of self-compacting mortar with ternary blends", Comput. Concrete, 21(2), 149-156. https://doi.org/10.12989/cac.2018.21.2.149.   DOI
5 Wang, S. and Li, V.C. (2007), "Engineered cementitious composites with high-volume fly ash", ACI Mater. J., 104(3), 233-241.
6 Yang, E.H., Sahmaran, M., Yingzi, Y. and Li, V.C. (2009), "Rheological control in production of engineered cementitious composites", ACI Mater. J., 106(4), 357-366.
7 Yildirim, G. (2019), "Dimensional stability of deflection hardening hybrid fiber reinforced concretes with coarse aggregate: Suppressing restrained shrinkage cracking", Struct. Concrete, 20(2), 836-850. https://doi.org/10.1002/suco.201800096.   DOI
8 Yildirim, G., Alyousif, A., Sahmaran, M. and Lachemi, M. (2015c), "Assessing the self-healing capability of cementitious composites under increasing sustained loading", Adv. Cement Res., 27(10), 581-592. https://doi.org/10.1680/adcr.14.00111.   DOI
9 Yildirim, G., Khiavi, A.H., Yesilmen, S. and Sahmaran, M. (2018), "Self-healing performance of aged cementitious composites", Cement Concrete Compos., 87, 172-186. https://doi.org/10.1016/j.cemconcomp.2018.01.004.   DOI
10 Ozyildirim, C. and Gomez, J.P. (2001), "High-performance concrete in a bridge in richlands, Virginia, Final report, VTRC 00-r6", Virginia Transportation Research Council, Charlottesville, Virginia, USA.
11 Pigeon, M. (1995), Modern Concrete Technology 4, Durability of Concrete in Cold Climates, Chapter 2. Theories of Frost Action and De-icer Salt Scaling Mechanisms, 11-30.
12 Ray, I., Davalos, J.F. and Luo, S. (2005), "Interface evaluations of overlay-concrete bi-layer composites by a direct shear test method", Cement Concrete Compos., 27, 339-347. https://doi.org/10.1016/j.cemconcomp.2004.02.048.   DOI
13 Sahmaran, M., Al-Emam, M., Yildirim, G., Simsek, Y.E., Erdem, T.K. and Lachemi, M. (2015), "High-early-strength ductile cementitious composites with characteristics of low early-age shrinkage for repair of infrastructures", Mater. Struct., 48(5), 1389-1403. https://doi/10.1617/s11527-013-0241-z.   DOI
14 Sahmaran, M., Ozbay, E., Yucel, H.E., Lachemi, M. and Li, V.C. (2012), "Frost resistance and microstructure of engineered cementitious composites: Influence of fly ash and micro polyvinyl-alcohol fiber", Cement Concrete Compos., 34(2), 156-165. https://doi.org/10.1016/j.cemconcomp.2011.10.002.   DOI
15 Sahmaran, M., Yucel, H.E., Yildirim, G., Al-Emam, M. and Lachemi, M. (2014), "Investigation of the bond between concrete substrate and ECC overlays", J. Mater. Civil Eng., 26, 167-174. https://doi/abs/10.1061/(ASCE)MT.1943-5533.0000805.   DOI
16 Saleem, M. (2017), "Study to detect bond degradation in reinforced concrete beams using ultrasonic pulse velocity test method", Struct. Eng. Mech., 64(4), 427-436. https://doi.org/10.12989/sem.2017.64.4.427.   DOI
17 Sprinkel, M. (2004), "Performance specification for high performance concrete overlays on bridges, final report, VTRC 05-R2", Virginia Transportation Research Council, Charlottesville, Virginia, USA.
18 Yucel, H.E., Sahmaran, M., Jashami, H., Guler, M. and Yaman, I.O. (2013), "Thin ECC overlay systems for rehabilitation of rigid concrete pavement", Mag. Concrete Res., 65(2), 108-120. https://doi.org/10.1680/macr.12.00022.   DOI
19 Wagner, C., Bretschneider, N. and Slowik, V. (2013), "Characterization of time interface between strain hardening, cementitious repair layers and concrete subgrade", FraMCoS-8, Toledo, Spain.
20 Yucel, H.E. (2020), Academic Studies in Engineering-II, Chapter12: 'Mechanical Performance of Engineered Cementitious Composites (ECC)/Asphalt Concrete Composite Systems', Gece Kitapligi, Ankara, Turkey.
21 Zaharieva, R., Buyle-Bodin, F. and Wirquin, E. (2004), "Frost resistance of recycled aggregate concrete", Cement Concrete Res., 34, 1927-1932. https://doi.org/10.1016/j.cemconres.2004.02.025.   DOI
22 Zanotti, C., Rostagno, G. and Tingley, B. (2018), "Further evidence of interfacial adhesive bond strength enhancement through fiber reinforcement in repairs", Constr. Build. Mater., 160, 775-785. https://doi.org/10.1016/j.conbuildmat.2017.12.140.   DOI
23 Zhang, J. and Li, V.C. (2002), "Monotonic and fatigue performance in bending of fiber reinforced engineered cementitious composite in overlay system", Cement Concrete Res., 32, 415-423. https://doi.org/10.1016/S0008-8846(01)00695-0.   DOI
24 Sahmaran, M., Yildirim, G. and Erdem, T.K. (2013), "Self-healing capability of cementitious composites incorporating different supplementary cementitious materials", Cement Concrete Compos., 35(1), 89-101. https://doi.org/10.1016/j.cemconcomp.2012.08.013.   DOI
25 Yildirim, G., Al-Emam, M.K.M., Hameed, R.K.H., Al-Najjar, Y. and Lachemi, M. (2015b), "Effects of compressive strength, autogenous shrinkage and testing methods on the bond behavior of HES-ECC", ACI Mater. J., 112(3), 409-418.
26 Han, F., He, X., Zhang, Z. and Liu, J. (2017), "Hydration heat of slag or fly ash in the composite binder at different temperatures", Thermochimica Acta, 655, 202-210. https://doi.org/10.1016/j.tca.2017.07.002.   DOI
27 Ohtsu, M. (2005), "Nondestructive evaluation of damaged concrete due to freezing and thawing by elastic-wave method", J. Adv. Concrete. Tech., 3, 333-341. https://doi/10.3151/jact.3.333.   DOI
28 Oz, H.O., Yucel, H.E. and Gunes, M. (2016), "Freeze-thaw resistance of self compacting concrete incorporating basic pumice", Int. J. Appl. Mech., 1, 285-291.
29 Ozbay, E., Sahmaran, M., Lachemi, M. and Yucel, H.E. (2012), "Effect of microcracking on the frost durability of high volume fly ash and slag incorporated ECC", ACI Mater. J., 110(3), 259-268.
30 Chen, X., Chen, C., Liu, Z., Lu J. and Fan, X. (2018), "Compressive behavior of concrete under high strain rates after freeze-thaw cycles", Comput. Concrete, 21(2), 209-217. https://doi.org/10.12989/cac.2018.21.2.209.   DOI
31 Kamada, T. and Li, V.C. (2000), "The effects of surface preparation on the fracture behavior of ECC/concrete repair system", Cement Concrete Compos., 22(6), 423-431. https://doi.org/10.1016/S0958-9465(00)00042-1.   DOI
32 Lepech, M.D. and Li, V.C. (2010), "Sustainable pavement overlays using engineered cementitious composites", Int. J. Pav. Res. Tech., 3(5), 241-250.
33 Lim, Y.M. and Li, V.C. (1997) "Durable repair of aged infrastructures using trapping mechanism of engineered cementitious composites", Cement Concrete Compos., 19(4), 373-385. https://doi.org/10.1016/S0958-9465(97)00026-7.   DOI
34 Yildirim, G., Sahmaran, M., Balcikanli, M., Ozbay, E. and Lachemi, M. (2015a), "Influence of cracking and healing on the gas permeability of cementitious composites", Constr. Build. Mater., 85, 217-226. https://doi.org/10.1016/j.conbuildmat.2015.02.095.   DOI
35 Lin, H.X., Lu, J.Y. and Xu, B. (2017). "Numerical approach to fracture behavior of CFRP/concrete bonded interfaces", Comput. Concrete, 20(3), 291-295. https://doi.org/10.12989/cac.2017.20.3.291.   DOI
36 Mokarem, D.W., Lane, D.S., Ozyildirim, H.C. and Sprinkel, M.M. (2008), "Measurement of early age shrinkage of virginia concrete mixtures", Final Report, VTRC 08-R9. Virginia Transportation Research Council, Charlottesville, Virginia, USA.
37 Molero, M., Aparicio, S., Al-Assadi, G., Casati, M.J., Hernandez, M.G. and Anaya, J.J. (2012), "Evaluation of freeze-thaw damage in concrete by ultrasonic imaging", NDT E Int., 52, 86-94. https://doi/10.1016/j.ndteint.2012.05.004.   DOI
38 Munoz, M.A.C., Harris, D.K., Ahlborn, T.M. and Froster, D.C. (2014), "Bond performance between ultrahigh-performance concrete and normal-strength concrete", J. Mater. Civil Eng., 26(8), 04014031/1-9. https://doi/abs/10.1061/%28ASCE%29MT.1943-5533.0000890.   DOI
39 Tayeh, B.A., Bakar, B.H.A., Johari, M.A.M. and Voo, Y.L. (2013), "Evaluation of bond strength between normal concrete substrate and ultra high performance fiber concrete as a repair material", Proc. Eng., 54, 554-563. https://doi.org/10.1016/j.proeng.2013.03.050.   DOI
40 Alhassan, M.A. (2007), "Performance-based aspects and structural behavior of high performance fibrous bonded concrete overlays", PhD Thesis, University of Illinois, USA.
41 Alyousif, A., Anil, O., Sahmaran, M., Lachemi, M., Yildirim, G. and Ashour, A.F. (2015a), "Comparison of shear behaviour of engineered cementitious composite and normal concrete beams with different shear span lengths", Mag. Concrete Res., 68(5), 217-228. https://doi.org/10.1680/jmacr.14.00336.   DOI
42 Alyousif, A., Anil, O., Sahmaran, M., Lachemi, M., Yildirim, G. and Ashour, A.F. (2015b), "Tests of high-performance fiber-reinforced concrete beams with different shear span-to-depth ratios and main longitudinal reinforcement", J. Reinf. Plast. Compos., 34(18), 1491-1505. https://doi.org/10.1177/0731684415592717.   DOI
43 Bonaldo, E., Barros, J.A.O. and Lourenco, P.B. (2005), "Bond characterization between concrete substrate and repairing SFRC using pull-off testing", Int. J. Adhes. Adhesiv., 25, 463-474. https://doi/10.1016/j.ijadhadh.2005.01.002.   DOI
44 Alyousif, A., Lachemi, M., Yildirim, G., Aras, G.H. and Sahmaran, M. (2016), "Influence of cyclic frost deterioration on water sorptivity of microcracked cementitious composites", J. Mater. Civil Eng., 28(4), 04015159. https://doi/abs/10.1061/%28ASCE%29MT.1943-5533.0001408   DOI
45 ASTM C39 (2012), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, USA.
46 ASTM C597-16 (2016), Standard Test Method for Pulse Velocity Through Concrete, Annual Book of ASTM Standards, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, USA.
47 Elsen, J. (2001), "Automated air void analysis on hardened concrete results of a European inter comparison testing program", Cement Concrete Res., 31, 1027-1031. https://doi.org/10.1016/S0008-8846(01)00517-8.   DOI
48 Gutierrez-Junco, O.J. Hernandez Carrillo, C.G. and Sarmiento Rojas, J.A. (2019), "Effect on the heat of hydration, setting times and mechanical resistance adding fly ash and blast furnace slag in commercial cement mixtures", J. Phys. Conf. Ser., 1386(1), 012004. https://doi:10.1088/1742-6596/1386/1/012004.   DOI