Browse > Article
http://dx.doi.org/10.12989/gae.2019.18.4.439

Cooperative bearing behaviors of roadside support and surrounding rocks along gob-side  

Tan, Yunliang (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology)
Ma, Qing (College of Mining and Safety Engineering, Shandong University of Science and Technology)
Zhao, Zenghui (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology)
Gu, Qingheng (College of Mining and Safety Engineering, Shandong University of Science and Technology)
Fan, Deyuan (College of Mining and Safety Engineering, Shandong University of Science and Technology)
Song, Shilin (College of Mining and Safety Engineering, Shandong University of Science and Technology)
Huang, Dongmei (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology)
Publication Information
Geomechanics and Engineering / v.18, no.4, 2019 , pp. 439-448 More about this Journal
Abstract
The bearing capacity of roadside support is the key problem in gob-side entry retaining technology. To study the cooperative bearing characteristics of the roof-roadside support-floor along the gob-side entry retaining, a mechanical model of the composite structure of the roof-roadside support-floor was first established. A method for determining the structural parameters of gob-side entry retaining was then proposed. Based on this model, adaptability analysis of roadside support was carried out. The results showed that the reasonable width of the gob-side entry roadway was inversely proportional to the mining height, and directly proportional to the bearing strength of the roof and floor. And the reasonable width of the "flexible-hard" roadside support was directly proportional to its own strength, and inversely proportional to the width of the gob-side entry retaining. When determining the position and size of the roadside support along the gob-side entry retaining, the surrounding rock environment should be fully considered. Measured results from case study also show the rationality of the model and calculation method.
Keywords
"flexible-hard" roadside support; composite structures; cooperative bearing capacity; gob-side entry retaining;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Cording, E.J., Hashash, Y.M.A. and Oh, J. (2015), "Analysis of pillar stability of mined gas storage caverns in shale formations", Eng. Geol., 184, 71-80. https://doi.org/10.1016/j.enggeo.2014.11.001.   DOI
2 Cui, L. and Fall, M. (2016), "An evolutive elasto-plastic model for cemented paste backfill", Comput. Geotech., 71, 19-29. https://doi.org/10.1016/j.compgeo.2015.08.013.   DOI
3 Fan, D.Y., Liu, X.S., Tan, Y.L., Song, S.L., Gu, Q.H., Yan, L. and Xu, Q. (2019), "Roof cutting parameters design for gob-side entry in deep coal mine: A case study", Energies, 12, 2032. https://doi.org/10.3390/en12102032.   DOI
4 Fu, Y.P., Song, X.M., Xing, P.W., Yan, G.C. and Li, Z.J. (2009), "Stability analysis on main roof key blocks in large mining height workface", J. Chin. Coal Soc., 34(8), 1027-1031.
5 Guo, W.Y., Tan, Y.L., Yu, F.H., Zhao, T.B., Hu, S.C., Huang, D.M. and Qin, Z.W. (2018), "Mechanical behavior of rock-coal-rock specimens with different coal thicknesses", Geomech. Eng., 15(4), 1017-1027. https://doi.org/10.12989/gae.2018.15.4.1017.   DOI
6 Guo, W.Y., Tan, Y.L., Zhao, T.B., Liu, X.M., Gu, Q.H. and Hu, S.C. (2016), "Compression creep characteristics and creep model establishment of Gangue", Geotech. Geol. Eng., 34(4), 1193-1198. https://doi.org/10.1007/s10706-016-0038-2.   DOI
7 Han, C.L., Zhang, N., Li, G.C., Li, B.Y. and Wu, H. (2014), "Stability analysis of compound bearing structure of gob-side entry retaining with large mining height", Chin. J. Geotech. Eng., 36(5), 969-976.
8 Ivanovic, A., Starkey, A., Neilson, R.D. and Rodger, A.A. (2003), "The influence of load on the frequency response of rock bolt anchorage", Adv. Eng. Softw., 34(11-12), 697-705. https://doi.org/10.1016/S0965-9978(03)00099-1.   DOI
9 Jiang, B.Y., Gu, S.T., Wang, L.G., Zhang, G.C. and Li, W.S. (2019), "Strainburst process of marble in tunnel-excavation-induced stress path considering intermediate principal stress", J. Central South Univ., 26(4), 984-999. https://doi.org/10.1007/s11771-019-4065-z.   DOI
10 Jiang, H., Mamadou, F. and Liang, C. (2016), "Yield stress of cemented paste backfill in sub-zero environments: Experimental results", Min. Eng., 92, 141-150. https://doi.org/10.1016/j.mineng.2016.03.014.   DOI
11 Jiang, L., Zhang, P., Chen, L., Hao, Z., Sainoki, A., Mitri, H.S. and Wang, Q. (2017), "Numerical approach for goaf-side entry layout and yield pillar design in fractured ground conditions", Rock Mech. Rock Eng., 50(4), 1-23. https://doi.org/10.1007/s00603-017-1277-0.   DOI
12 Kaiser, P.K. and Cai, M. (2012), "Design of rock support system under rockburst condition", J. Rock Mech. Geotech. Eng., 4(3), 215-227. https://doi.org/10.3724/SP.J.1235.2012.00215.   DOI
13 Komurlu, E., Kesimal, A. and Demir, S. (2016), "Experimental and numerical study on determination of indirect (splitting) tensile strength of rocks under various load apparatus", Can. Geotech. J., 53(2), 545-564. https://doi.org/10.1139/cgj-2014-0356.
14 Liu, X.S., Gu, Q.H., Tan, Y.L., Ning, J.G. and Jia, Z.C. (2019), "Mechanical characteristics and failure prediction of cement mortar with a sandwich structure", Minerals, 9(3), 143. https://doi.org/10.3390/min9030143.   DOI
15 Liu, X.S., Ning, J.G., Tan, Y.L. and Gu, Q.H. (2016), "Damage constitutive model based on energy dissipation for intact rock subjected to cyclic loading", Int. J. Rock Mech. Min. Sci., 85, 27-32. https://doi.org/10.1016/j.ijrmms.2016.03.003.   DOI
16 Liu, X.S., Tan, Y.L., Ning, J.G., Lu, Y.W. and Gu, Q.H. (2018), "Mechanical properties and damage constitutive model of coal in coal-rock combined body", Int. J. Rock Mech. Min. Sci., 110, 140-150. https://doi.org/10.1016/j.ijrmms.2018.07.020.   DOI
17 Lyu, X.Z., Zhao, Z.H., Wang, X.J. and Wang, W.M. (2019), "Study on the permeability of weakly cemented sandstones", Geofluids, https://doi.org/10.1155/2019/8310128.
18 Ma, Q., Tan, Y.L., Zhao, Z.H., Xu, Q., Wang, J. and Ding, K. (2018), "Roadside support schemes numerical simulation and field monitoring of gob-side entry retaining in soft floor and hard roof", Arab. J. Geosci., 11, 563. https://doi.org/10.1007/s12517-018-3904-9.   DOI
19 Ma, S., Nemcik, J. and Aziz, N. (2014), "Simulation of fully grouted rockbolts in underground roadways using FLAC2D", Can. Geotech. J., 51(8), 911-920. https://doi.org/10.1139/cgj-2013-0338.   DOI
20 Mazaira, M.A. and Konicek, P. (2015), "Intense rockburst impacts in deep underground construction and their prevention", Can. Geotech. J., 52(10), 1426-1439. https://doi.org/10.1139/cgj-2014-0359.   DOI
21 Ning, J.G., Liu, X.S., Tan, J., Gu, Q.H., Tan, Y.L. and Wang, J. (2018), "Control mechanisms and design for a 'coal-backfillgangue' support system for coal mine gob-side entry retaining", Int. J. Oil Gas Coal T., 18(3-4), 444-465.   DOI
22 Ning, J.G., Wang, J., Liu, X.S., Qian, K. and Sun, B. (2014), "Soft-strong supporting mechanism of gob-side entry retaining in deep coal seams threatened by rockburst", Int. J. Min. Sci. Technol., 24(6), 805-810. https://doi.org/10.1016/j.ijmst.2014.10.012.   DOI
23 Pappas, D.M. and Mark, C. (1993), "Behavior of simulated longwall gob material", Report of Investigations, US Bureau of Mines.
24 Pappas, D.M. and Mark, C. (1993), "Behavior of simulated longwall gob material", Report of Investigation, Bureau of Mines, RI-9458, US Department of the Interior.
25 Paul, A., Singh, A.P., John, L.P., Ajoy, K.S. and Manoj, K. (2012), "Validation of RMR-based support design using roof bolts by numerical modeling for underground coal mine of Monnet Ispat, Raigarh, India-a case study", Arab. J. Geosci., 5(6), 1435-1448. https://doi.org/10.1007/s12517-011-0313-8.   DOI
26 Qi, C.C, Chen, Q.S., Fourie, A. and Zhang, Q.L. (2018), "An intelligent modelling framework for mechanical properties of cemented paste backfill", Miner. Eng., 123(16), 16-27. https://doi.org/10.1016/j.mineng.2018.04.010.   DOI
27 Recio-Gordo, D. and Jimenez, R. (2012), "A probabilistic extension to the empirical ALPS and ARMPS systems for coal pillar design", Int. J. Rock Mech. Min. Sci., 52, 181-187. http://dx.doi.org/10.1016%2Fj.ijrmms.2012.03.009.   DOI
28 Schumacher, F.P. and Kim, E. (2014), "Evaluation of directional drilling implication of double layered pipe umbrella system for the coal mine roof support with composite material and beam element methods using FLAC3D", J. Min. Sci., 50(2), 335-348. https://doi.org/10.1134/S1062739114020173.   DOI
29 Shi, G.Y. (2014), "Gateway retained along goaf technology with pier pillar backfilled with high water material in high gassy mine", Coal Sci. Tech., 42(7), 30-32.
30 Song, Z.Q., Cui, Z.D., Xia, H.C., Tang, J.C. and Wen, Z.J. (2010), "The fundamental theoretical on the green safe no coal pillar mining model by mainly using coal gangue backfill", J. Chin. Coal Soc., 35(5), 705-710.
31 Tan, Y.L., Gu, Q.H., Ning, J.G., Liu, X.S., Jia, Z.C. and Huang, D.M. (2019), "Uniaxial compression behavior of cement mortar and its damage-constitutive model based on energy theory", Materials, 12(8), 1309. https://doi.org/10.3390/ma12081309.   DOI
32 Tan, Y.L., Yu, F.H., Ning, J.G. and Zhao, T.B. (2015), "Design and construction of entry retaining support along a gob-side under hard roof stratum", Int. J. Rock Mech. Min. Sci., 77, 115-121. http://dx.doi.org/10.1016%2Fj.ijrmms.2015.03.025.   DOI
33 Thompson, B.D., Bawden, W.F. and Grabinsky, M.W. (2012), "In situ measurements of cemented paste backfill at the Cayeli Mine", Can. Geotech. J., 49(7), 755-772. https://doi.org/10.1139/t2012-040.   DOI
34 Wang, J., Ning, J.G., Jiang, J.Q. and Bu, T.T. (2018), "Structural characteristics of strata overlying of a fully mechanized longwall face: A case study", J. South Afr. Inst. Min. Metall., 118(11), 1195-1204. http://dx.doi.org/10.17159/2411-9717/2018/v118n11a10.
35 Wang, Y., Fall, M. and Wu, A. (2016), "Initial temperature-dependence of strength development and self-desiccation in cemented paste backfill that contains sodium silicate", Cement Concrete Compos., 67, 101-110.   DOI
36 Yang, H.Y., Cao, S.G., Wang, S.Q., Fan, Y.C., Wang, S. and Chen, X.Z. (2016), "Adaptation assessment of gob-side entry retaining based on geological factors", Eng. Geol., 209, 143-151. https://doi.org/10.1016/j.enggeo.2016.05.016.   DOI
37 Yang, X.K., Xiong, R., Yang, F., Yin, H.Q. and Yang, T. (2015), "Laboratory investigation of the high temperature rheological property of activated coal gangue modified asphalt binder", Appl. Mech. Mater., 744-746, 1261-1265.   DOI
38 Yin, D.W., Chen, S.J., Liu, X.Q. and Ma, H.F. (2018), "Effect of joint angle in coal on failure mechanical behavior of roof rockcoal combined body", Quart. J. Eng. Geol. Hydrogeol., 51(2), 202-209. https://doi.org/10.1144/qjegh2017-041.   DOI
39 Zhao, Z.H., Ma, Q., Chen, S.J., Ma, H. and Gao, X.J. (2018), "Prediction model of failure zone in roadway sidewall considering the lithologic effect of rock formation", Math. Prob. Eng., https://doi.org/10.1155/2018/9627564.
40 Zhao, Z.H., Ma, Q., Tan, Y.L. and Gao, X.J. (2018), "Load transfer mechanism and reinforcement effect of segmentally yieldable anchorage in weakly consolidated soft rock", Simulation, 95(1), 83-96. https://doi.org/10.1177%2F0037549718770284.   DOI