Browse > Article

Studies on a Micro Reformer System with a Two-staged Microcombustor  

Kim, Ki-Baek (Grad. School of Sungkyunkwan Univ.)
Lee, Jung-Hak (Grad. School of Sungkyunkwan Univ.)
Kwon, Oh-Chae (School of Mechanical Engineering, Sungkyunkwan Univ.)
Publication Information
Transactions of the Korean hydrogen and new energy society / v.19, no.3, 2008 , pp. 217-225 More about this Journal
Abstract
A new micro reformer system consisted of a micro reformer, a microcombustor and a micro evaporator was studied experimentally and computationally. In order to satisfy the primary requirements for designing the microcombustor integrated with a micro evaporator, i.e. stable burning in a small confinement and maximum heat transfer through a wall, the present microcombustor is simply cylindrical to be easily fabricated but two-staged (expanding downstream) to feasibly control ignition and stable burning. Results show that the aspect ratio and wall thickness of the microcombustor substantially affect ignition and thermal characteristics. For the optimized design conditions, a premixed microflame was easily ignited in the expanded second stage combustor, moved into the smaller first stage combustor, and finally stabilized therein. A micro reformer system integrated with a modified microcombustor based on the optimized design condition was fabricated. For a typical operating condition, the designed micro reformer system produced 22.3 sccm hydrogen (3.61 W in LHV) in an overall efficiency of 12%.
Keywords
microcombustor; micro reformer; methanol steam reforming; hydrogen;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Lu G. Q., and Wang C. Y., 'Development of micro direct methanol fuel cells for high power applications,' J. Power Sources, Vol. 144, 2005, pp. 141-145   DOI   ScienceOn
2 Fluent Inc., 'Fluent 6.2 User's Guide,' Fluent Inc., Lebanon, NH, USA., 2005
3 Kim K. B., and Kwon O. C., 'Studies on a two-staged micro-combustor for a micro-reformer integrated with a micro-evaporator,' J. Power Sources, Vol. 182, 2008, pp. 609-615   DOI   ScienceOn
4 Tonkovich A.Y., Zilka J.L., Jimenez D.M., Lamont M.J., and Wegeng R.S., 'Microchannel Chemical Reactors for Fuel Processing', AIChE Spring National Meeting, New Orleans, USA, March 9-12, PNNL-SA-29747, 1998
5 Kee R. J., Rupley F. M., and Miller J. A., 'The CHEMKIN Thermodynamic Data Base,' Report No. SAND87-8215B, Sandia National Laboratories, Albuquerque, NM, USA., 1992
6 Shin Y., Kim O., Hong J.-C., Oh J.-H., Kim W.-J., Haam S., and Chung C.-H., 'The development of micro-fuel processor using low temperature co-fired ceramic(LTCC)', Int. J. Hydrogen Energy., Vol. 31, 2006, pp. 1925-1933   DOI   ScienceOn
7 Pina J., Bucalá V., and Borio D.O., 'Optimization of steam reformers: Heat flux distribution and carbon formation,' Int. J. Chem. Reactor Eng. Vol. 1, 2003, p. A25
8 Hautman D. J., Dryer F. L., Schug K. P., and Glassman I., 'A multiple-step overall kinetic mechanism for the oxidation of hydrocarbons,' Combust. Sci. Tech., Vol. 25, 1981, pp. 219-235   DOI
9 Peckner D., and Bernstein I. M., 'Handbook of Stainless Steels,' McGraw-Hill, New York, NY, USA. 1987, pp. 19.1-19.36
10 Shioya M., 'Expectation of micro fuel cell technology,' 2nd Int. Hydrogen & Fuel Cell Expo, Tokyo, Japan, 2006, pp. 69-85
11 Yoshida K., Tanaka S., Hiraki H., and Esashi M., 'A micro fuel reformer integrated with a combustor and a microchannel evaporator,' J. Micromech. Microeng., Vol. 16, 2006, pp. 191-197   DOI   ScienceOn