Browse > Article
http://dx.doi.org/10.5228/KSPP.2004.13.6.490

Experimental and FE Analysis to Improve the Accuracy of Springback Prediction on Sheet Metal Forming  

Lee Y. S. (한국기계연구원 재료공정연구부)
Kim M. C. (한국기계연구원 재료공정연구부)
Kwon Y, N. (한국기계연구원 재료공정연구부)
Lee J. H. (한국기계연구원 재료공정연구부)
Publication Information
Transactions of Materials Processing / v.13, no.6, 2004 , pp. 490-496 More about this Journal
Abstract
Springback comes from the release of external loads after forming. The control of phenomenon is especially important in the sheet metal forming since there are no other practical methods available to correct the dimensional inaccuracy from springback. Therefore the accurate prediction before the die machining has been a long goal in the field of sheet metal forming. The am of the present study is to enhance the prediction capability of finite element (FE) analysis for the springback phenomenon. For this purpose FE analysis for V-bending has been carried out with the commercial programs, LS-DYNA. The FE analysis results have been validated through the comparison of experimental. The experimental results measured directly by the strain gauge have given the confidence to FEA.
Keywords
V-Bending; Plastic Strain; Elastic Strain; Springback; Residual Stress;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Narkeeran Narasimhan, Michael Lovell, 1999, 'Predicting springback in sheet metal forming : an explicit to implicit sequential solution procedure' FINITE elements in Analysis and design 33, pp. 29-42   DOI   ScienceOn
2 이두환, 윤치상, 신철수, 조원석, 구본영, 금영탁, 2000, '수직벽을 가진 자동차 부품 성형공정의 스프링백 유한 요소해석' 한국소성가공학회지(2000) 제9권, 제6호
3 박종세, 김승호, 허 훈, 2002, '박판 성형공정에서의 등가경계조건 계산을 위한 드로우 비드 성형의 탄소성 유한 요소 해석-Part Ⅱ : 프론트 도어 판넬 성형공정에의 적용' 한국소성가공학회지, 제11권, 제6호
4 박종세, 김승호, 허 훈, 2002, '박판 성형공정에서의 등가경계조건 계산을 위한 드로우 비드 성형의 탄소성 유한 요소 해석-Part Ⅰ : 등가 경계조건 계산' 한국소성가공학회지, 제11권, 제6호
5 양재봉, 전병희, 오수익, 2000, '반응 표면분석법을 이용한 알 루미늄 판재성형 공정의 스프링백 저감에 관한 연구' 한국소성가공학회지, 제9권, 제5호
6 Xuechun Li, Yuying Yang, Yongzhi Wang, Jun Bao and Shunping Li, 2002, 'Effect of the material-hardening mode on the springback simulation accuracy of V-bending. J. of Materials Processing Tech 123 pp. 209-211
7 김영은, 김종호 정완진, 2001, '글래드 강판재의 축대칭 디프 드로잉의 탄소성 유한요소해석' 한국소성가공학회지, 제 10권, 제 5호
8 서의권, 심현보, 1996, '정사각형 컵 Deep drawing 의 탄소성 해석' 한국소성가공학회지, 제 5 권, 제 1 호
9 B.K. Chun, H.Y. Kim, J.T.Jinn, J.K.Lee, 2002, 'Modeling the Bauschinger effect for sheet metals, part I, II : theory ' Int. J.Plasicty 18, pp.571-616
10 Jenn-Terng Gau, Gary L. Kinzel, 2001, 'A new model for springback prediction in which the Bauschinger effect is considered' Int.J. of Mech Sci 43, pp. 1813-1832   DOI   ScienceOn
11 K.P. Li, W.P. Carden, R.H. Wagoner, 2002, 'Simulation of springback' Int. J.. Mech. .Sci 44, pp. 103-122   DOI   ScienceOn
12 R.M. Cleveland, A.K. Ghosh, 2002, 'Inelastic effects on springback in metals' Int. J.of Plasticty 18, pp. 769-785   DOI   ScienceOn