Browse > Article
http://dx.doi.org/10.5228/KSPP.2003.12.6.572

Automatic Surface Generation for Extrusion Die of Non-symmetric H-and U-shaped sections  

유동진 (대진대학교 컴퓨터응용기계설계학과)
임종훈 (대진대학교 기계설계공학과 대학원)
양동열 (한국과학기술원 기계공학과)
Publication Information
Transactions of Materials Processing / v.12, no.6, 2003 , pp. 572-581 More about this Journal
Abstract
In this paper, an automatic surface construction method based on B-spline surface and scalar field theory is proposed to generate the extrusion die surface of non-symmetric H-and U-shaped sections. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u-and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity of the proposed method, automatic surface generation is carried out for extrusion die of non-symmetric H-and U-shaped sections.
Keywords
B-Spline Surface; Extrusion Die Surface; Scalar Field Theory; Stream Lines;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 유동진, 임종훈, 2003, "B-스플라인 곡면기법을 이용한 압출 금형 곡면의 표현방법에 관한 연구" 한국소성가공학회지, 제 12 권, 제 2 호, pp. 142-150.   과학기술학회마을   DOI   ScienceOn
2 Chitkara, N. R. and Celik. K. F., 2001, "Extrusion of non-symmetric T-shaped sections, an analysis and some experiments", Int. J. Mech. Sci., Vol. 43, pp. 2961-2987.   DOI   ScienceOn
3 Gunasekera, J. S., Gegel, H. L., Malas, J. C. and Doraivelu, S. M., 1982, "Computer Aided Process Modeling of Hot Forging and Extrusion of Aluminum Alloys", Annals of CIRP, Vol. 31, No. 1, pp. 131-136.   DOI   ScienceOn
4 Nagpal, V. and Altan, T., 1975, "Analysis of the Three-Dimensional Metal Forming in Extrusion of Shapes with Use of Dual Stream Functions", Proc. ${3}^ {rd} North American Met. Res. Conf. Pittsburgh, Pennsylvania, pp. 26-40.
5 Joun, M. S. and Hwang, S. M., 1998, "Die shape Optimal Design in Three-Dimensional Shape Metal Extrusion by the Finite Element Method", Int. J. Num. Methods Eng., Vol. 41, pp. 311-335.   DOI   ScienceOn
6 Les Piegl and Wayne Tiller, 1995, The NURBS Book, Springer.
7 Nagpal, V., 1977, "On the Solution of Three Dimensional Metal Forming Processes", J. Eng. Ind. Trans. ASME Series B. Vol. 99, pp. 624-629.   DOI
8 Gunasekera, J. S. and Hoshino, S., 1980, "Analysis of Extrusion of Non-Circular Sections through Shaped Dies", Annals of CIRP, Vol. 29, pp. 141-145.   DOI   ScienceOn
9 Shin, H. W., Kim, D. W. and Kim. N. S., 1993, "A simplified three-dimensional finite-element analysis of the non-axisymmetric extrusion processes", Journal of Materials Processing Technology, Vol. 38, pp. 567-587.   DOI   ScienceOn
10 Tirupathi R. Chandrupatla, Ashok D. Belegundu, 2002, Introduction to Finite Elements in Engineering.
11 유동진, 윤정환, 2000, "박판성형 해석을 위한 자동 툴 격자생성에 관한 연구" 한국소성가공학회지, 제 9 권, 제 2 호, pp. 140-151.   과학기술학회마을
12 유동진, 권혁종, 임종훈, 2003, "NURBS 곡면과 면적사상법을 이용한 압축 금형 곡면의 표현 방법에 관한 연구" 한국소성가공학회지, 제 12 권, 제 4 호, pp. 348-357.   과학기술학회마을   DOI   ScienceOn
13 유동진, 임종훈, 2003, "NURBS 곡면기법을 이용한 압출 금형 곡면의 표현방법에 관한 연구" 한국소성가공학회지, 제 12 권, 제 2 호, pp. 151-160.   과학기술학회마을   DOI   ScienceOn
14 Yang, D. Y, Kim, M. U. and Lee, C. H., 1978, "A New Approach for Generalized Three-Dimensional Extrusion of Sections form Round Billets by Conformal transformation", Proceedings of IUTAM Symposium, Tutzing, Germany, pp. 203-222.
15 Celik, K. F. and Chitkara, N. R., 2002, "Extrusion of non-symmetric U-and I-shaped sections through ruled-surface dies : numerical simulations and some experiments", Int. J. Mech. Sci., Vol. 44, pp. 217-246.   DOI   ScienceOn
16 Yang, D. Y., Han, C. H. and Kim, M. U., 1986, "A generalized method for analysis of three-dimensional extrusion of arbitrarily shaped sections", Int. J. Mech. Sci., Vol. 28, pp. 517-534.   DOI   ScienceOn
17 Celik. K. F. and Chitkara, N. R., 2000, "Application of an upper bound method to off-centric extrusion of square sections, analysis and experiments", Int. J. Mech. Sci., Vol. 42, pp. 321-345.   DOI   ScienceOn