1 |
B. V. S. Praveen, R. Manivannan, T. D. Umashankar, B. J. Cho, J. G. Park, & S. Ramanathan "Abrasive and additive interactions in high selectivity STI CMP slurries" Microelectronic Engineering, 114 98-104 (2014).
DOI
|
2 |
D. S. Lim, J. W. Ahn, H. S. Park, & J. H. Shin "The effect of abrasive size on dishing and step height reduction of silicon oxide film in STI-CMP" Surface and Coatings Technology, 200(5) 1751-1754 (2005).
DOI
|
3 |
S. Kondo, S. Tokitoh, B. U. Yoon, A. Namiki, A. Sone, N. Ohashi, & K. Yoneda " Low-pressure CMP for reliable porous low-k/Cu integration" In Interconnect Technology Conference, 2003. Proceedings of the IEEE 2003 International (pp. 86-88). (2003).
|
4 |
E. E. Remsen, S. Anjur, D. Boldridge, M. Kamiti, S. Li, T. Johns, & P. Feeney "Analysis of large particle count in fumed silica slurries and its correlation with scratch defects generated by CMP" Journal of The Electrochemical Society 153(5), G453-G461 (2006).
DOI
|
5 |
Y. Ahn, J. Y. Yoon, C. W. Baek, & Y. K. Kim "Chemical mechanical polishing by colloidal silicabased slurry for micro-scratch reduction' Wear 257(7), 785-789 (2004).
DOI
|
6 |
J. Luo, & D. A. Dornfeld "Material removal regions in chemical mechanical planarization for submicron integrated circuit fabrication: coupling effects of slurry chemicals, abrasive size distribution, and wafer-pad contact area" IEEE Transactions on Semiconductor Manufacturing 16(1), 45-56 (2003).
DOI
|
7 |
Y. J. Seo, S. Y. Kim, Y. O. Choi, Y. T. Oh, & W. S. Lee "Effects of slurry filter size on the chemical mechanical polishing (CMP) defect density" Materials letters 58(15), 2091-2095 (2004).
DOI
|
8 |
Y. Wang, R. Bajaj, & F. C. Redeker U.S. Patent No. 6,569,349. Washington, DC: U.S. Patent and Trademark Office (2003).
|
9 |
W. G. America, & S. V. Babu "Slurry additive effects on the suppression of silicon nitride removal during CMP" Electrochemical and solid-state letters 7(12), G327-G330 (2004).
DOI
|
10 |
B. L. Mueller, C. C. Streinz, & S. K. Grumbine, U.S. Patent No. 5,958,288. Washington, DC: U.S. Patent and Trademark Office (1999).
|
11 |
S. N. Victoria, P. P. Sharma, I. I. Suni, & S. Ramanathan "Potassium bromate as an oxidizing agent in a titania-based Ru CMP slurry" Electrochemical and Solid-State Letters 13(11), H385-H387 (2010).
DOI
|
12 |
Farkas, J., Jairath, R., Stell, M., & Tzeng, S. M. U.S. Patent No. 5,614,444. Washington, DC: U.S. Patent and Trademark Office (1997).
|
13 |
R. Manivannan, & S. Ramanathan "Role of abrasives in high selectivity STI CMP slurries" Microelectronic Engineering 85(8), 1748-1753 (2008).
DOI
|
14 |
Y. J. Seo, & W. S. Lee "Effects of oxidant additives for exact selectivity control of W-and Ti-CMP process" Microelectronic engineering 77(2), 132-138 (2005).
DOI
|
15 |
T. Gopal, & J. B. Talbot "Effects of CMP slurry chemistry on the zeta potential of alumina abrasives" Journal of The Electrochemical Society 153(7), G622-G625 (2006).
DOI
|
16 |
Y. J. Seo, G. W. Choi & W. S. Lee "Evaluation of electrical and optical properties of indium tin oxide thin film using chemical mechanical polishing technique" Microelectronic Engineering 84(12), 2896- 2900 (2007).
DOI
|
17 |
N. K. Penta, H. P. Amanapu, & S. V. Babu "Further Investigation of Slurry Additives for Selective Polishing of Films over Using Ceria Dispersions" ECS Journal of Solid State Science and Technology 4(11), P5025-P5028 (2015).
DOI
|
18 |
A. Prasad, G. Fotou, & S. Li "The effect of polymer hardness, pore size, and porosity on the performance of thermoplastic polyurethane-based chemical mechanical polishing pads" Journal of Materials Research 28(17), 2380-2393 (2013).
DOI
|