Browse > Article
http://dx.doi.org/10.5050/KSNVN.2009.19.7.659

Dynamic Modeling of ER Damper Considering Fluid Compressibility  

Seong, Min-Sang (인하대학교 기계공학과)
Ha, Sung-Hun (인하대학교 기계공학과)
Nguyen, Quoc-Hung (인하대학교 기계공학과)
Choi, Seung-Bok (인하대학교 기계공학부)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.19, no.7, 2009 , pp. 659-666 More about this Journal
Abstract
This paper proposes a new method for dynamic modeling of electrorheological(ER) damper considering fluid compressibility. After describing configuration and operating principle of the ER damper, a quasi-static modeling of the ER damper is conducted on the basis of Bingham model of ER fluid. Subsequently, the dynamic model for describing the ER damper considering compressibility of ER fluid and gas chamber is obtained using the lumped parameter method. This method includes dynamic motions of annular duct, upper chamber, lower chamber and connecting pipe. The hysteresis behavior of the ER damper is evaluated through computer simulations and compared with experimental results. In addition, the hysteresis behavior due to the compressibility of ER fluid and gas chamber is investigated through computer simulations.
Keywords
Electrorheological Fluid; ER Damper; Dynamic Model; Lumped Parameter Method; Fluid Compressibility;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Ha, S. H., Choi, S. B., Rhee, E. J. and Kang, P. S., 2009, “Performance Evaluation of 6WD Military Vehicle Featuring MR Damper,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, No. 1, pp. 17~23   DOI   ScienceOn
2 Guo, S. Q., Yang, S. P. and Pan, C. Z., 2006, “Dynamic Modeling of Magnetorheological Damper Behavior,” Journal of Intelligent Material Systems and Structures, Vol. 17, No. 3, pp. 3~14   DOI
3 Spencer, B. F., Dyke, S. J., Sain, M. K. and Carlson, J. D., 1997, “Phenomenological Model for a Magnetorheological Damper,” Journal of Engineering Mechanics ASCE, Vol. 123, pp. 230~238   DOI   ScienceOn
4 Choi, S. B. and Lee, S. K., 2001, “A Hysteresis Model for the Field-dependent Damping Force of a Magnetorheological Damper,” Journal of Sound and Vibration, Vol. 245, pp. 375~383   DOI   ScienceOn
5 Wereley, N. M. and Pang, L., 1997, “Nondimensional Analysis of Semi-active Electrorheological and Magnetorheological Dampers Using Approximate Parallel Plate Models,” Smart Materials and Structures, Vol. 7, pp. 732~743   DOI   ScienceOn
6 Delivorias, P. P., 2004, “Application of ER and MR Fluid in an Automotive Crash Energy Absorber Report.”
7 Doebelin, E., 1972, System Dynamics Modeling and Response, Bell&Howell Company, Columbus, Ohio
8 Khalil, M. N., 2000, “Development and Analysis of the Lumped Parameter Model of Piezohydraulic Actuator,” Master's Thesis irginia Polytechnic Institute, Blackburg, Virginia, USA
9 William, E. H., 2002, 'Piezohydraulic Actuator Design and Modeling Using a Lumped-parameter Approach,' Master's Thesis irginia Polytechnic Institute, Blackburg, Virginia, USA
10 Lai, C. Y. and Liao, W. H., 2002, “Vibration Control of a Suspension System Via a Magnetorheological Damper,” Journal of Vibration and Control, Vol. 8, pp. 527~547   DOI   ScienceOn
11 Nakano, M., 1995, “A Novel Semi-active Control of Automotive Suspension Using an Electrorheological Shock Absorber,” 5th International Conference on ER Fluid, MR Suspensions and Associated Technology, pp. 645~653
12 Seong, M. S., Sung, K. G., Han, Y. M., Choi, S. B. and Lee, H. G., 2008, “Vibration Control of MR Suspension System Considering Damping Force Hysteresis,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 3, pp. 315~322   DOI   ScienceOn