Browse > Article
http://dx.doi.org/10.20910/JASE.2017.11.6.17

A Study of Aircraft Ground Motion  

Song, Won Jong (The 7 th Research and Development Institute, Agency for Defense Development)
Publication Information
Journal of Aerospace System Engineering / v.11, no.6, 2017 , pp. 17-25 More about this Journal
Abstract
Vertical reaction force between ground and tire is an important parameter determining the ground behavior characteristics of aircraft. This parameter can be used to calculate the lateral force and friction. However, it is hard to obtain this parameter in real-time when the aircraft is taxiing. Therefore, pre-analysis of ground behavior and vertical reaction force should be conducted using ground simulation results to prevent rollover or hazardous scenarios. In this paper, a Landing Gear and Full-Aircraft model was constructed using VI-Aircraft S/W. The roll behavior of aircraft was analyzed using steering simulation results compared with taxi-test data.
Keywords
Aircraft; Landing Gear; VI-Aircraft, Ground Simulation;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 J. W. Shin, T. U. Kim, S. C Kim, J. S. Lee and S. J. Chung, "Performance Analysis of the Aircraft Landing Gear," The Korean Society of Mechanical Engineers, pp. 482-487, Nov. 2011.
2 S. Choi, J. H. Lee, K. D. Cho and C. R. Jung, "An analysis on the ground impact load and dynamic behavior of the landing gear system using ADAMS," Journal of The Korean Society for Aeronautical and Space Sciences, vol. 30, no. 4, pp. 114-122, June 2002.   DOI
3 J. D. Han, Y. S Kang, O. S. Ahn and Y. S. Lee, "A Study on Parameters of SUAV Landing Gear Orifice," Journal of The Korean Society for Aeronautical and Space Sciences, vol. 37, no. 1, pp. 99-104, Jan. 2009.   DOI
4 W. S. Park, J. U. Hwang, Y. H. Hyun, J. H. Hwang, J. S. Bae and T. U. Kim, "Dynamic Characteristics Analysis of Landing Gear that Consider 6-Degree of Freedom of Helicopter," Journal of Aerospace System Engineering, vol. 2, no. 1, pp. 1-6, Jan. 2008.
5 J. U. Hwang, J. S. Bae, J. H. Hwang, Y. S. Hong, S. J. Park and T. K. Chung, "Nose Landing Gear Drop-test Simulation using Numerical Analysis about Orifice," Journal of Aerospace System Engineering, vol. 8, no. 1, pp. 18-23, Jan. 2014.
6 S. N. Kang, Y. Y. Kim, C. H. Kim, Y. J. Kim, J. S. Song, S. Y. Choi and J. S. Shim, "The Nonlinear Shimmy Analysis of T-50 Supersonic Aircraft Using ADAMS," The Korean Society For Aeronautical And Space Sciences, pp. 284-287, April 2003.
7 J. H. Walls, "Investigation of the Air-Compression process during Drop tests of an Oleo-Pneumatic Landing Gear," NACA-TN-2477, Washington, pp. 5-9, 1951.
8 W. J. Song, M. S. Yi, J. Y. Kwon and S. J. Chung, "Composition of the Strut model to Simulate Performance of Landing Gear," The Society for Aerospace System Engineering Spring Conference, Jeju, Korea, May 14-16, 2014.
9 VI-Grade, "VI-Aircraft 17.0 Documentation," VI-Grade GmbH, Marburg, Germany, pp. 146-165, 400-461, 2016.
10 NATO Standardization Agency, "STANAG 4671 (EDITION 1) - Unmanned Aerial Vehicle Systems Airworthiness Requirements," pp. 1-D-9, 2009.
11 N. S. Currey, "Aircraft Landing Gear Design : Principles and Practices," AIAA Inc., Washington D.C, pp. 47-50, 1988.
12 R. Rajamani, D. Piyabongkarn, V. Tsourapas and J. Y. Lew, "Real-Time Estimation of Roll Angle and CG Height for Active Rollover Prevention Applications," American Control Conference, St. Louis, MO, USA, pp. 433-438, June 10-12, 2009.
13 D. Odenthal, T. Bunte and J. Acjermann, "Nonlinear Steering and Braking Control for Vehicle Rollover Avoidance," European Control Conference, Karlsruhe, Germany, pp. 598-603, Aug. 31-Sep. 3, 1999.