Browse > Article
http://dx.doi.org/10.5516/NET.2010.42.4.339

ASSESSMENT OF CFD CODES USED IN NUCLEAR REACTOR SAFETY SIMULATIONS  

Smith, Brian L. (Thermal Hydraulics Laboratory, Nuclear Energy and Safety Department Paul Scherrer Institute)
Publication Information
Nuclear Engineering and Technology / v.42, no.4, 2010 , pp. 339-364 More about this Journal
Abstract
Following a joint OECD/NEA-IAEA-sponsored meeting to define the current role and future perspectives of the application of Computational Fluid Dynamics (CFD) to nuclear reactor safety problems, three Writing Groups were created, under the auspices of the NEA working group WGAMA, to produce state-of-the-art reports on different aspects of the subject. The work of the second group, WG2, was to document the existing assessment databases for CFD simulation in the context of Nuclear Reactor Safety (NRS) analysis, to gain a measure of the degree of quality and trust in CFD as a numerical analysis tool, and to take initiatives to extend the existing databases. The group worked over the period of 2003-2007 and produced a final state-of-the-art report. The present paper summarises the material gathered during the study, illustrating the points with a few highlights. A total of 22 safety issues were identified for which the application of CFD was considered to potentially bring real benefits in terms of better understanding and increased safety. A list of the existing databases was drawn up and synthesised, both from the nuclear area and from other parallel, non-nuclear, industrial activities. The gaps in the technology base were also identified and discussed. In order to initiate new ways of bringing experimentalists and numerical analysts together, an international workshop -- CFD4NRS (the first in a series) -- was organised, a new blind benchmark activity was set up based on turbulent mixing in T-junctions, and a Wiki-type web portal was created to offer online access to the material put together by the group giving the reader the opportunity to update and extend the contents to keep the information source topical and dynamic.
Keywords
OECD/NEA; CFD; Verification; Validation; Assessment; Databases; Quality and Trust;
Citations & Related Records

Times Cited By Web Of Science : 1  (Related Records In Web of Science)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 Prasser, H.-M., et al., “The multipurpose thermal hydraulic test facility TOPFLOW: an overview on experimental capabilities, instrumentation and results”, Nucl. Eng. Des., 237, 1848-1861 (2007).   DOI
2 http://www.nuresim.com/
3 Metzner, K.-J., Wilke, U., “European THERFAT project – thermal fatigue evaluation of piping system “Tee”-connections”, Nucl. Eng. Des., 235, 473-484 (2005).   DOI   ScienceOn
4 Bielert, U., et al., “Multi-dimensional simulation of hydrogen distribution and turbulent combustion in severe accidents”, Nucl. Eng. Des., 209, 165-172 (2001).   DOI
5 Hardt, P. von der, Jones, A.V., Lecomte., C., Tattegrain, A., “The PHEBUS FP Severe Accident Experimental Programme”, Nuclear Safety, 35(2), 187-205 (1994).
6 http://www.ansys.com/
7 http://www.ansys.com/Products/cfx.asp
8 http://www.simulia.com/products/abaqus_cfd.html
9 Oberkampf, W., Trucano, T.G., “Verification and Validation Benchmarks”, Nucl. Eng. Des., 238(3), 716-743 (2008).   DOI
10 Roache, P.J., “Code Verification by the Method of Manufactured Solutions”, ASME J. Fluids Eng., 124(1), 4-10 (2002)   DOI
11 Roache, P.J., Verification and Validation in Computational Science and Engineering, Hermosa Publishers, Albuquerque, New Mexico, 1998.
12 Wilson, G.E., Boyack, B.E., “The role of the PIRT process in experiments, code development and code applications associated with reactor safety analysis”, Nucl. Eng. Des., 186, 23-37 (1998)   DOI
13 http://www.cd-adapco.com/
14 http://www.cham.co.uk/
15 http://www-trio-u.cea.fr/
16 Mechitoua, M., et al., “An unstructured finite volume solver for two-phase water-vapour flows based on an elliptic oriented fractional step method,” Proc. 11th Int. Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH 11), Avignon, France, Oct. 2-6, 2005.
17 http://www.opencfd.co.uk/openfoam/
18 Karwat, H. (ed.), “SOAR on Containment Thermal Hydraulics and Hydrogen Distribution”, OECD Nuclear Energy Agency, Technical Report, NEA/CSNI/R(1999)16,
19 Brun, P. et al., “Specification of International Standard Problem on Containment Thermal-Hydraulics ISP-47, Step 1: TOSQAN–MISTRA,” Institut de Radioprotection et de Surete Nucleaire (IRSN) and Comissariat a l'Energie Atomique (CEA), Saclay, France, 2002.
20 Caron-Charles, M., Quillico, J.J.. Brinster, J., “Steam condensation experiments by the MISTRA facility for field containment code validation”, Paper 22661, Proc. 10th Int. Conf. on Nucl. Eng. (ICONE-10), Arlington, Virginia, USA, April 14-18, 2002
21 Sonnenkalb, M., Poss, G., “The International Test Programme in the THAI Facility and its Use for Code Validation”, Eurosafe 2009, Brussels, Belgium, Nov. 2-3, 2009.
22 Paladino, D., Andreani, M., Zboray, R., Dreier, J., “Toward a CFD-Grade Database Addressing LWR Containment Phenomena”, Proc. OECD/NEA-IAEA Joint Conf. on CFD for Nuclear Reactor Safety Applications (CFD4NRS-3), Bethesda, Maryland, USA, Sept. 14-16, 2010.
23 http://www.fluent.com/
24 Breitung W, et al., “Integral large-scale experiments on hydrogen combustion for severe accident code validation-HYCOM”, Nucl. Eng. Des., 70, 235-253 (2005).   DOI
25 Redlinger, R., “DET3D - A CFD Tool for Simulating Hydrogen Combustion in Nuclear Reactor Safety, Proc. CFD4NRS: Conf. on Benchmarking of CFD Codes for Applications to Nuclear Reactor Safety,”, Garching, Munich, Germany, 5-7 Sept. 2006.
26 http://www.abaqus.com
27 Dorofeev, S.B., et al., “Large scale hydrogen/air detonation experiments: the effect of ignition location and hydrogen concentration on load”, Report number RRCKI- 80e05/59, Russian Research Center, Kurchatov Institute, 1993.
28 Tuomisto, H. et al., “EUBORA - Concerted Action on Boron Dilution Experiments”, Proc. FISA-99 Symp., Luxembourg, 29 Nov. - 1 Dec., 1999.
29 Weiss, F.-P. et al., “Fluid Mixing and Flow Distribution in the Reactor Circuit (FLOWMIX-R)”, Proc. FISA-2003, Symp., Luxembourg, 10-13 Nov., 2003.
30 Wakamatsu, M., Nei, H., Hashiguchi, K., “Attenuation of Temperature Fluctuations in Thermal Striping”, J. Nucl. Sci. Tech., 32(8), 752-762 (1995).   DOI
31 Jungclaus, D., et al., “Common IPSN/GRS Safety Assessment of Primary Coolant Unisolable Leak Incidents caused by Stress Cycling”, NEA/CSNI Specialist Meeting on Experience with Thermal Fatigue in LWR Piping caused by Mixing and Stratification, OECD/NEA, Paris France, 7-12 June, 1998.
32 Shah V.N., et al., “Assessment of Field Experience Related to Pressurized Water Reactor Primary System Leaks”, Proc. ASME PVP Conf., Boston, USA, Aug. 1-5, 1999.
33 Chapuliot, S. et al., “Hydro-thermal-mechanical analysis of thermal fatigue in a mixing tee”, Nucl. Eng. Des., 235, 575-596 (2005).   DOI   ScienceOn
34 Wolf, L., “Experimental results of coupled fluid-structure interaction during blow down of the HDR-vessel and comparison with pre- and post-test prediction”, Nucl. Eng. Des., 70, 269-308 (1982).   DOI
35 Hoehne, T., Kliem, S., Bieder, U., “Modeling of a buoyancydriven flow experiment at the ROCOM test facility using the CFD-codes CFX-5 and TRIO_U”, Nucl. Eng. Des., 236(12), 1309-1325 (2006).   DOI
36 Shiina, K. et al., “Evaluation of Flow Characteristics in the Lowere Plenum of the ABWR by using CFD Analysis”, Paper 36393, Proc. 11th Int. Conf. on Nuclear Engineering (ICONE-11), Tokyo, Japan, April 20-23, 2003.
37 Tinoco, H., “Three-Dimensional Modelling of a Steam-Line Break in a Boiling Water Reactor”, Nucl. Safety and Eng., 140, 152-164 (2002).
38 Yadigaroglu, G., Zeller, G.M., “Fluid-to-fluid scaling for a gravity- and flashing-driven natural circulation loop”, Nucl. Eng. Des., 151, 49-64 (1994).   DOI
39 http://www.opencfd.co.uk/openfoam/
40 D’Auria, F., “Overview of Uncertainty Methods in Nuclear Reactor Thermal-Hydraulics”, Invited Paper N13P1446, Proc. 13th Int. Top. Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-13), Kanazawa City, Japan, Sept. 27 - Oct. 2, 2009.
41 CSNI Report NEA/CSNI/R(2002)16, OECD Nuclear Energy Agency, Paris, France, 2002.
42 Smith, B.L. (ed.), “Assessment of Computational Fluid Dynamics (CFD) for Nuclear Reactor Safety Problems”, OECD Nuclear Energy Agency, Technical Report, NEA/CSNI/R(2007)13, Jan. 2008.
43 Bestion, D. (ed.) “Extension of CFD Codes to Two-Phase Flow Safety Problems”, OECD, Nuclear Energy Agency, Technical Report, NEA/CSNI/R(2010)2, March 2010.
44 Hoehne, T., Prasser, H.-M., Rohde, U., “Numerical coolant mixing in comparison with experi-ments at the ROCOM test facility”, Proc. ANS Winter Meeting, Reno, USA, Nov. 11-15, 2001
45 Smith, B.L. “Identification and Prioritization of Generic Nuclear Safety Problems Requiring CFD Analysis”, Paper 75482, Proc. 17th Int. Conf. on Nuclear Engineering (ICONE-17), Brussels, Belgium, July 12-16, 2009.   DOI
46 Queral, C., Gonzalez, I., “Analysis of Heterogeneous Boron Dilution Sequences”, Proc. Int. Conf: Nuclear Energy for New Europe 2004, Portoroz, Slovenia, Sept. 6-9, 2004.
47 Gavrilas, M., Kiger, K., “ISP-43: Rapid Boron Dilution Transient Experiment. Comparison Report”, OECD Nuclear Energy Agency, Technical Report, NEA/CSNI/R(2000)22, Feb. 2001.
48 Hemstrom, B., Karlsson, R., Henriksson, M., “Experiments and Numerical Modelling of Rapid Boron Dilution Transients in a Westinghouse PWR”, Annual Meeting on Nuclear Technology, Berlin, Germany, May 20-22, 2003.
49 Harlow, F.H., Amsden, A.A., “Flow of Interpenetrating Material Phases.” J. Comp. Phys., 18, 440-464 (1975).   DOI
50 RELAP5/Mod3 code manual – code structure, system models and solution methods, Vol. I., The Thermal Hydraulics Group, SCIENTECH Inc., Idaho, June 1999.
51 GOTHIC Containment Analysis Program, Version 7.2a(QA), EPRI, Palo Alto, CA, Jan. 2006.
52 TRACE V5.0 theory manual – field equations, solution methods and physical models, Office of Nuclear Regulatory Research. US NRC, 2007.
53 Bestion, D., Barre, F., Faydide, B., “Methodology, status and plans for development and assessment of the CATHARE code”, Proc. OECD/CSNI Int. Conf., Annapolis, USA, 5-8 Nov. 1999.
54 Graf U., “Implicit Coupling of Fluid-Dynamic Systems: Application to Multidimensional Countercurrent Two-Phase Flow of Water and Steam”, Nucl. Sci. Eng., 129, 305-310 (1998).
55 J. R. Travis, et al., “GASFLOW: A Computational Fluid Dynamics Code for Gases, Aerosols, and Combustion, Volume 2, User’s Manual”, LA-13357-MS, FZKA-5994, FZK Karlesruhe, 1998.
56 Gauntt, R.O. et al., MELCOR Computer Code Manuals, Version 1.8.5, May 2000, NUREG/CR-6119, SAND-2417/2, May 2000.
57 Siefken, L.J., Coryell, E.W., Harvego, E.A., Hohorst, J.K., SCDAP/RELAP5/MOD3.3 Code Manual, NUREG/CR-6150, INEL-96/0422, January 2000.
58 http://www.fauske.com/maap.html.
59 Yadigaroglu, G., Zeller, M., “Fluid-to-fluid scaling for a gravity - and flashing-driven natural circulation loop”, Nucl. Eng. Des., 151, 49-64 (1994).   DOI
60 Wulff, W., “Scaling of thermohydraulic systems”, Nucl. Eng. Des., 163, 359-395 (1996).   DOI
61 Ishii, M., Kataoka, I., “Scaling laws for thermal-hydraulic system under single phase and two-phase natural circulation”, Nucl. Eng. Des., 81, 411-425 (1984).   DOI
62 Zuber, N., et al., “An integrated structure and scaling methodology for severe accident technical issue resolution: development of methodology”, Nucl. Eng. Des., 186, 1-21 (1998).   DOI
63 Smith, B. L., Hassan, Y. (eds.) “CFD4NRS: Benchmarking of CFD Codes for Application to Nuclear Reactor Safety”, Special Issue, Nucl. Eng. Des., 238(3), 443-785 (2008).   DOI
64 XCFD4NRS: Experiments and CFD Code Applications to Nuclear Reactor Safety, Grenoble, France, 10-12 Sept. 2010 (CD-ROM).
65 Westin, J. et al., “High-cycle thermal fatigue in mixing tees. Large eddy simulations compared to a new validation experiment”, Paper 48731, Proc. 16th Int. Conf. on Nucl. Engng (ICONE16), Orlando, Florida, USA, May 11-15, 2008.
66 http://meta.wikimedia.org/wiki/Help:Introduction/
67 Rodi, W., Turbulence Models and their Application in Hydraulics: A State of the Art Review, IAHR Monograph, 3rd edition, A. A. Balkema, Rotterdam, 2000.
68 Makynen, J., Jokiniemi, J., (eds.), “CSNI/PWG4/FPC AHMED Code Comparison Exercise”, OECD Nuclear Energy Agency, Technical Report, NEA/CSNI/R(95)23, October 1995.
69 Firnhaber, M., Fischer, K., Schwarz, S., Weber, G., “International Standard Problem ISP-44 KAEVER. Experiments on the behaviour of core-melt aerosols in a LWR containment”. OECD Nuclear Energy Agency, Technical Report, NEA/CSNI/R(2003)5.
70 Prasser, H.-M., Boettger, A., Zschau, J., Baranyai, G., Ezsoel, Gy., “Thermal Effects During Condensation Induced Water Hammer Behind Fast Acting Valves In Pipelines”, Paper 36310, Proc. 11th Int, Conf. on Nucl. Eng. (ICONE-11), Shinjuku, Tokyo, Japan, 20-23 April, 2003.
71 Perdu, F., “Contributions aux etudes de surete pour des filieres innovantes de reacteurs nucleaires”, PhD Thesis, Universite Joseph Fourier, Grenoble, 2003.
72 Studer, E., et al., “Gas Cooled Reactor Thermal-Hydraulics using the CAST3M and CRONOS2 codes”, Proc. 9th Int. Top. Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), Seoul, Korea, Oct. 5-9, 2003.
73 Billot,P., Hittner, D., Vasseur, P., “Outlines of the French R&D Programme for the Development of High and Very High Temperature Reactors”, 3rd Int. Topical Meeting on High Temperature Reactor Technology, Johannesburg, S.A., Oct. 1-4, 2006.
74 Parkinson, C.N., Parkinson’s Law: The Pursuit of Progress, London, John Murray, 1958.
75 Peyret, R., Taylor, Th., Computational Methods for Fluid Flow, p42, Springer-Verlag, New York, 1983.
76 Norris, S.E., “A Parallel Navier-Stokes Solver for Natural Convection and Free-Surface Flow”, Ch. 6, PhD Thesis, Dept. Mech. Eng., University of Sydney, Sept. 2000.
77 Jeong, J.J., et al., “Assessment of the COBRA/RELAP5 Code Using the LOFT l2-3 Large-Break Loss-of-Coolant Experiment”, Ann. Nucl. Energy, 24, 1171-1182 (1997).   DOI
78 Mahaffy, J. (ed.) “Best Practice Guidelines for the Use of CFD in Nuclear Reactor Safety Applications”, OECD, Nuclear Energy Agency, Technical Report, CSNI/R(2007)5, April 2007
79 Zboray, R., Manera, A., Niceno, B., Prasser H.-M., “Investigations on Mixing Phenomena in Single-Phase Flows in a T-Junction Geometry”, Proc. 12th Int. Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-12), Paper No. 71, Pittsburgh, USA, Sept. 30 - Oct. 4, 2007
80 http://www.nea.fr/nsd/csni/cfd/
81 Graf, U., “Implicit Coupling of Fluid-Dynamic Systems: Application to Multidimensional Countercurrent Two-Phase Flow of Water and Steam”, Nucl. Sci. Eng., 129, 305-310 (1998).   DOI
82 Kliem, S., Hoehne, T., Rohde, U., Weiss, F.-P., “Main Steam Line Break Analysis of a VVER-440 Reactor Using the Coupled Thermohydraulics System/3D-Neutron Kinetics Code DYN3D/ATHLET in Combination with the CFD Code CFX-4”, Proc. 9th Int. Top. Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-9), San Francisco, USA, Oct. 3-8, 1999.
83 Aumiller, D.L., Tomlinson, E.T., Weaver, W.L., “An Integrated RELAP5-3D and Multiphase CFD Code System Utilizing a Semi-Implicit Coupling Technique”, Nucl. Eng. Des., 216, 77-87 (2002).   DOI
84 Schultz, R.R., Weaver, W.L., Ougouag, A.M., “Validating & verifying a new thermal-hydraulic analysis tool”, Proc. 10th Int. Conf. on Nuclear Engineering (ICONE10), Arlington, USA, April 14-18, 2002.
85 Bertolotto, D., et al., “Single-phase mixing studies by means of a directly coupled CFD/ system-code tool”, Ann. Nucl. Energy, 36(3), 310-316 (2009).   DOI
86 Vos, J.B., et al., “Overview of Application Challenges in the Aeronautical Industry”, QNET-CFD Network Bulletin, No. 1, pp. 1-7, July 2001.
87 Firnhaber, M., Kanzleiter, T.F., Schwarz, S., Weber, G., “International Standard Problem ISP-37. VANAM M3 – A multi compartment aerosol depletion test with hygroscopic aerosol material”, Comparison Report, OCDE/GD(97)16, December 1996.
88 http://www.esi-group.com/products/Fluid-Dynamics/cfdace
89 http://www.ercoftac.org/
90 http://www.grc.nasa.gov/WWW/wind/valid/validation.html/
91 Hoehne, T., Prasser, H.-M., Rohde, M., “Numerical coolant mixing in comparison with experiments at the ROCOM test facility”, Proc. ANS Winter Meeting, Reno, USA, Nov. 11-15, 2001
92 Prasser, H.-M., et al., “Coolant mixing in a PWR - deboration transients, steam line breaks and emergency core cooling injection - experiments and analyses”, Nucl. Technol., 143(1), 37–56 (2003)
93 Theofanous, T.G., Yan, H., “A unified interpretation of one-fifth to full-scale thermal mixing experiments related to pressurized thermal shock”, NUREG/CR-5677, April 1991.
94 Wolf, L., “Experimental results of coupled fluid-structure interaction during blowdown of the HDR-vessel and comparison with pre- and post-test prediction”, Nucl. Eng. Des., 70, 269-308 (1982).   DOI
95 Scheuerer, M., et al., “Evaluation of computational fluid dynamic methods for reactor safety analysis (ECORA)”, Nucl. Eng. Des., 235, 359-368 (2005).   DOI