Browse > Article
http://dx.doi.org/10.12989/sem.2019.71.5.563

The significance of removing shear walls in existing low-rise RC frame buildings - Sustainable approach  

Keihani, Reza (School of Computing and Engineering, University of West London)
Bahadori-Jahromi, Ali (Civil Engineering, School of Computing and Engineering, University of West London)
Goodchild, Charles (the Concrete Centre)
Publication Information
Structural Engineering and Mechanics / v.71, no.5, 2019 , pp. 563-576 More about this Journal
Abstract
According to The Concrete Centre, in the UK shear walls have become an inseparable part of almost every reinforced concrete frame building. Recently, the construction industry has questioned the need for shear walls in low to mid-rise RC frame buildings. This study tried to address the issue in two stages: The first stage, the feasibility of removing shear walls in an existing design for a residential building where ETABS and CONCEPT software were used to investigate the structural performance and cost-effectiveness respectively. The second stage, the same structure was examined in various locations in the UK to investigate regional effects. This study demonstrated that the building without shear wall could provide adequate serviceability and strength within the safe range defined by Eurocodes. As a result, construction time, overall cost and required concrete volume are reduced which in turn enhance the sustainability of concrete construction.
Keywords
low-rise RC buildings; wind actions; sustainability; non-linear static analysis; cost-effectiveness;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Jayasundara, H., Koliyabandara, S. and Wijesundara, K. (2017), "Comparative study of diagrid system and shear wall system for resisting wind loads using different design approaches", Soc. Struct. Eng., 1-9.
2 Johann, F., Carlos, M. and Ricardo, F. (2015), "Wind-induced motion on tall buildings: A comfort criteria overview", J. Wind Eng. Industrial Aerodynam., 142, 26-42. https://doi.org/10.1016/j.jweia.2015.03.001.   DOI
3 Kwok, K., Hitchcock, P. and Burton, M. (2009), "Perception of vibration and occupant comfort in wind-excited tall buildings", J. Wind Eng. Industrial Aerodynam., 97(7-8), 368-380. https://doi.org/10.1016/j.jweia.2009.05.006.   DOI
4 Met Office. (2018), UK Snow and Facts; Met Office, United Kingdom. www.metoffice.gov.uk/learning/precipitation/snow/snowin-the-uk.
5 Musson, R. and Sargeant, S. (2007), "Eurocode 8 seismic hazard zoning maps for the UK", British Geological Survey, Nottingham, United Kingdom. 42-43.
6 National Building Code of Canada (1995) Structural Commentaries Part 4, The Committee, Ottawa, Canada.
7 Rasikan, A. and Rajendran, M. (2013), "Wind behavior of buildings with and without shear wall", J. Eng. Res. Appl. (IJERA), 3(2), 480-485.
8 Smith, R. (2011), "Deflection limits in tall buildings-Are they useful?", Structures Congress 2011, Las Vegas, USA, April. https://doi.org/10.1061/41171(401)45.
9 Spaceagecontrol.com. (2001), Relationship Among Displacement, Velocity, Frequency, and Acceleration During Sinusoidal Motion; SpaceAge Control, Palmdale, CA, USA. https://www.spaceagecontrol.com/calcsinm.htm.
10 Thakur, A. and Singh, A. (2014), "Comparative analysis of a multistoried residential building with and without shear wall using STAAD Pro", J. Recent Res. Aspects, 1(1), 54-57.
11 Bond, A., Brooker, O., Harris, A., Harrison, T., Moss, R., Narayanan, R. and Webster, R. (2006), How to Design Concrete Structures using Eurocode 2, The Concrete Centre, London, United Kingdom.
12 Tovi, S., Goodchild, C. and B-Jahromi, A. (2017), "Deformation of multi-storey flat slabs, a site investigation", Adv. Concrete Consruct., 5(1), 49-63. Deformation of multi-storey flat slabs, a site investigation.   DOI
13 Wiki.csiamerica.com. (2018), Product Descriptions - Technical Knowledge Base; Computers and Structures, Inc., California, USA. wiki.csiamerica.com/display/kb/Product+Descriptions.
14 Aainawala, M. and Pajgade, P. (2014), "Design of multistoried R.C.C. buildings with and without shear walls", J. Eng. Sci. Res. Technol., 7(3), 498-510.
15 Archer, C. and Jacobson, M. (2005), "Evaluation of global wind power", J. Geophys. Res., 110(D12). https://doi.org/10.1029/2004JD005462.
16 Banks, C., Burridge, J., Cammelli, S. and Chiorino, M. (2014), Tall Buildings - Structural Design of Concrete Buildings up to 300 m Tall, MPA The Concrete Centre and Federation internationale du beton, London, United Kingdom.
17 BS 8110-2 (1985), "Structural use of concrete Part 2: Code of practice for special circumstances", BSI, London, United Kingdom.
18 BSI (2008), Guide to Evaluation of Human Exposure to Vibration in Buildings, British Standard Institution, London, United Kingdom.
19 Cismasiu, C., Ramos, A., Moldovan, I., Ferreira, D. and Filho, J. (2017), "Applied element method simulation of experimental failure modes in RC shear walls", Comput. Concrete, 19(4), 365-374. https://doi.org/10.12989/cac.2017.19.4.365.   DOI
20 Chandurkar, P. and Pajgade, P. (2013), "Seismic analysis of RCC building with and without shear wall", J. Modern Eng. Res. (IJMER), 3(3), 1805-1810.
21 Goodchild, C. (2009), Worked examples to Eurocode 2, The Concrete Centre, Camberley, Surrey, United Kingdom.
22 ETABS, (2018), Ceanet, Sydney, Australia. http://www.ceanet.com.au/Products/ETABS.aspx.
23 Eurocode 8 (2013), "Design of structures for earthquake resistance", BSI Standards Limited, London, United Kingdom.
24 Ghorpade, A. and Swamy, B. (2018), "Study on the performance of flat slab structure using pushover analysis with and without shear wall", Res. J. Eng. Technol. (IRJET), 5(7), 660-665.
25 Goodchild, C., Webster, R. and Elliott, K. (2009), Economic Concrete Frame Elements to Eurocode 2, The Concrete Center, Surrey, United Kingdom.
26 Holmes, J. (2004), Wind Loading of Structures, Spon Press, London, United Kindom.
27 Hosseini, M., Hosseini, H. and Hosseini, A. (2014), "Study effective of wind load on behavior of shearwall in frame structure", J. Eng. Res. Appl., 4(11), 23-33.
28 Hueste, M., Lepage, A., Wallace, J. and Browning, J. (2007), "Seismic design criteria for slab-column connections", ACI Struct. J., 104(4), 448-458.
29 Hughes, A. (2014), Wind actions to BS EN 1991-1-4, Steel Construction Institute, Ascot, USA.
30 Jayalekshmi, B. and Chinmayi, H. (2015), "Seismic behavior of RC framed shear wall buildings as per IS 1893 and IBC provisions", Geomech. Eng., 9(1), 39-55. https://doi.org/10.12989/gae.2015.9.1.039.   DOI