Browse > Article
http://dx.doi.org/10.3807/COPP.2022.6.1.044

Design and Fabrication of an Off-axis Elliptical Zone Plate in Visible Light  

Anh, Nguyen Nu Hoang (Department of Science of Measurement, University of Science and Technology)
Rhee, Hyug-Gyo (Department of Science of Measurement, University of Science and Technology)
Kang, Pilseong (Optical imaging and Metrology Team, Advanced Instrumentation Institute, Korea Research Institute of Standards and Science)
Ghim, Young-Sik (Department of Science of Measurement, University of Science and Technology)
Publication Information
Current Optics and Photonics / v.6, no.1, 2022 , pp. 44-50 More about this Journal
Abstract
An off-axis zone plate is able to focus on a single order while neglecting the zeroth order in a visible imaging system. This allows one to enhance the contrast quality in diffractive images, which is the major advantage of this type of zone plate. However, most previous reflection zone plates are used in focusing X-rays with a small grazing incident angle and are intricately designed with the use of a local grating period. In this study, we suggest the design of an off-axis elliptical zone plate (EZP) that is used to focus a monochromatic light beam with separation between the first and unfocused orders under a large grazing incident angle of 45°. An assumption using the total grating period, which depends on the average and constant grating period, is proposed to calculate the desired distance between the first and zeroth order and to simplify the construction of a novel model off-center EZP. Four diffractive optical elements (DOEs) with different parameters were subsequently fabricated by direct laser lithography and then verified using a performance evaluation system to compare the results from the assumption with the experimental results.
Keywords
Diffractive optical elements; Laser lithography; Off-axis elliptical zone plate;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Y.-G. Kim, H.-G. Rhee, Y.-S. Ghim, H.-S. Yang, and Y.-W. Lee, "Dual-line fabrication method in direct laser lithography to reduce the manufacturing time of diffractive optics elements," Opt. Express 25, 1636-1645 (2017).   DOI
2 Y.-G. Kim, H.-G. Rhee, Y.-S. Ghim, and Y.-W. Lee, "Method of fabricating an array of diffractive optical elements by using a direct laser lithography," Int. J. Adv. Manuf. Technol. 101, 1681-1685 (2019).   DOI
3 H. Merdji, G. Souille, M. Idir, G. Cauchon, A. Mirone, C. Chenais-Popovics, and P. Dhez, "2-D X-ray laser-plasma imaging using Bragg Fresnel multilayer zone plates," Opt. Commun. 155, 398-405 (1998).   DOI
4 A. G. Poleshchuk, E. G. Churin, V. P. Koronkevich, V. P. Korolkov, A. A. Kharissov, V. V. Cherkashin, V. P. Kiryanov, A. V. Kiryanov, S. A. Kokarev, and A. G. Verhoglyad, "Polar coordinate laser pattern generator for fabrication of diffractive optical elements with arbitrary structure," Appl. Opt. 38, 1295-1301 (1999).   DOI
5 S. Chen, A. Lyon, J. Kirz, S. Seshadri, Y. Feng, M. Feser, S. Sassolini, F. Duewer, X. Zeng, and C. Huang, "Absolute efficiency measurement of high-performance zone plates," Proc. SPIE 7448, 74480D (2009).   DOI
6 W. Zhao and K. Sakurai, "Seeing elements by visible-light digital camera," Sci. Rep. 7, 45472 (2017).   DOI
7 S. P. Chong, Z. Y. G. Ko, and N. Chen, "Visible light optical coherence microscopy for quantitative imaging of human skin in vivo," Proc. SPIE 11211, 1121109 (2020).
8 Z. Xu, C. Yang, P. Zhang, X. Zhang, Z. Cao, Q. Mu, Q. Sun, and L. Xuan, "Visible light high-resolution imaging system for large aperture telescope by liquid crystal adaptive optics with phase diversity technique," Sci. Rep. 7, 10034 (2017).   DOI
9 W. J. Mandl, "Visible light imaging sensor with A/D conversion at the pixel," Proc. SPIE 3649, 2-13 (1999).   DOI
10 Y. Wang, K. Kumar, L. Wang, and X. Zhang, "Monolithic integration of binary-phase Fresnel zone plate objectives on 2-axis scanning micromirrors for compact microendoscopes," Opt. Express 20, 6657-6668 (2012).   DOI
11 K. Zhong, Y. Fu, and G. Jiang, "Improvement in light out-coupling efficiency of OLED by using high fill factor parabola curve microlens arrays," Optik 212, 164604 (2020).   DOI
12 Q. Fan, S. Wang, Z. Yang, L. Wei, F. Hu, H. Zang, Q. Zhang, C. Wang, G. Jiang, and L. Cao, "The realization of long focal depth with a linear varied-area zone plate," J. Mod. Opt. 64, 244-250 (2017).   DOI
13 H. Kim and S.-Y. Lee, "Optical phase properties of small numbers of nanoslits and an application for higher-efficiency fresnel zone plates," Curr. Opt. Photonics 3, 285-291 (2019).   DOI
14 M. Brzhezinskaya, A. Firsov, K. Holldack, T. Kachel, R. Mitzner, N. Pontius, J. S. Schmidt, M. Sperling, C. Stamm, A. Fohlisch, and A. Erko, "A novel monochromator for experiments with ultrashort X-ray pulses," J. Synchrotron Radiat. 20, 522-530 (2013).   DOI
15 H.-G. Rhee and Y.-W. Lee, "Improvement of linewidth in laser beam lithographed computer generated hologram," Opt. Express 18, 1734-1740 (2010).   DOI
16 N. N. H. Anh, H.-G. Rhee, and Y.-S. Ghim, "Design and lithographic fabrication of elliptical zone plate array with high fill factor," Curr. Opt. Photonics 5, 8-15 (2021).   DOI
17 M. Ibek, T. Leitner, A. Erko, A. Firsov, and P. Wernet, "Monochromatizing and focussing femtosecond high-order harmonic radiation with one optical element," Rev. Sci. Instrum. 84, 103102 (2013).   DOI
18 Z. Li, Z. Zhang, Q. Yuan, Y. Qiao, K. Liao, and H. Yu, "Digital image processing in led visible light communications using mobile phone camera," in Proc. 5th International Conference on Network Infrastructure and Digital Content-IEEE IC-NIDC (Beijing, China, Sept. 2016), pp. 239-243.
19 G. Satat, B. Heshmat, D. Raviv, and R. Raskar, "All photons imaging through volumetric scattering," Sci. Rep. 6, 33946 (2016).   DOI
20 N. N. H. Anh, Y.-G. Kim, H.-G. Rhee, and Y.-S. Ghim, "Novel fabrication process for an array of elliptical zone plates by using direct laser lithography," Int. J. Adv. Manuf. Technol. 106, 2629-2634 (2020).   DOI
21 H. S. Kim, S. Il Moon, D. E. Hwang, K. W. Jeong, C. K. Kim, D.-G. Moon, and C. Hong, "Novel fabrication method of microlens arrays with high OLED outcoupling efficiency," Opt. Laser Technol. 77, 104-110 (2016).   DOI
22 K. Huang, Y. Gan, Q. Wang, and X. Jiang, "Enhanced light extraction efficiency of integrated LEDs devices 7with the taper holes microstructures arrays," Opt. Laser Technol. 72, 134-138 (2015).   DOI
23 J. Metje, M. Borgwardt, A. Moguilevski, A. Kothe, N. Engel, M. Wilke, R. Al-Obaidi, D. Tolksdorf, A. Firsov, M. Brzhezinskaya, A. Erko, I. Y. Kiyan, and E. F. Aziz, "Monochromatization of femtosecond XUV light pulses with the use of reflection zone plates," Opt. Express 22, 10747-10760 (2014).   DOI
24 M. Grigoriev, R. Fakhrtdinov, D. Irzhak, A. Firsov, A. Firsov, A. Svintsov, A. Erko, and D. Roshchupkin, "Two-dimensional Xray focusing by off-axis grazing incidence phase Fresnel zone plate on the laboratory X-ray source," Opt. Commun. 385, 15-18 (2017).   DOI