1 |
D.P.Townsend., 'Dudley's Gear Handbook,' McGRAW-HILL, pp. 4.23-4.25, 1990
|
2 |
Darle W. Dudley., 'Handbook of Practical Gear Design,' McGRAW-HILL, pp. 2.66, pp. 8.12-8.14, 1984
|
3 |
Nakada, T. and Utagawa, M., 'The Dynamic Loads on Gear Caused by the Varying Elasticity of the Mating Teeth,' Proceeding of the 6th japanese National Congress for Applied Mechanics, pp. 43, 1956
|
4 |
Raymond J. Drago., 'Fundamentals of Gear Design,' Butterworths, pp. 265-362, 1988
|
5 |
A.H. Elkholy., 'Tooth Load Sharing in High-Contact Ratio Spur Gear,' Journal of Mechanisms, Transmissions, and Automation in Design, vol. 107, pp. 11-16, 1985
DOI
ScienceOn
|
6 |
V. Simon., 'Load and Stress Distributions in Spur and Helical Gears,' Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 110, pp. 197-202, 1988
DOI
ScienceOn
|
7 |
K. L. Johnson., 'Contact Mechanics,' Cambridge University Press, pp. 5-44, 1985
|
8 |
김태완, 문석만, 구영필, 조용주, 'Spur Gear의 미끄럼 마멸률에 관한 연구,' 한국윤활학회지, 제 16권, 제 5호, pp. 357-364, 2000
과학기술학회마을
|
9 |
이경원, 반재삼, 김규하, 조규종, 'FEM을 이용한 스퍼기어 응력 해석에 관한 연구,' 한국정밀공학회지, 제19권, 제2호, pp. 171-176, 2002
과학기술학회마을
|
10 |
Masaaki YOKOYAMA., 'A Study on the Effect of Tooth Profile Modification Upon Seizure Resistance of Heavy-duty Spur Gear,' Journal of japan society of lubrication of engineers, Vol. 16, No. 9, pp. 656-665, 1971
|
11 |
American Gear Manufacturers Association, 'Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth,' ANSI/AGMA 908-B89, 1989
|
12 |
American Gear Manufacturers Association, 'Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth,' ANSI/AGMA 2001-B88, 1998
|