1 |
T. Orlowska-Kowalska, M. Dybkowski, and K. Szabat, “Adaptive sliding-mode neuro-fuzzy control of the two-mass drive system,” IEEE Trans. Ind. Electron., Vol. 54, No. 3, pp. 1352-1364, Jun. 2007.
DOI
|
2 |
M. Hirata, K. Z. Liu, and T. Mita, “Active vibration control of a 2-mass system using u-synthesis with a descriptor from representation .” Control Eng, Pract, Vol. 4, No. 4, pp. 545 -552, Apr. 1996.
DOI
|
3 |
S. N. Vukosavic and M. R. Stojic, ”Suppression of torsional oscillations in a high-performance speed servo drive,” IEEE Trans Ind. Electron., Vol. 45, No. 1, pp. 108-117, Feb. 1998.
DOI
|
4 |
R. Musznski and J. Deskur, ”Damping of torsional vibration in high-dynamic industrial drives,” IEEE, Trans. Ind. Electron, Vol. 57, No. 2, pp. 554-552, Feb. 2010.
|
5 |
L. Wang and Y. Frayman, “A dynamically generated fuzzy neural network and its application to torsional vibration control of tandem cold rolling mill spindles,” Eng. Appl. Artif. Intell., Vol. 15, No. 6, pp. 541-550, Dec. 2002.
DOI
|
6 |
T. Orlowska-Kowalska and K. Szabat, “Neuro-fuzzy approach for mechanical variables estimation of a two-mass drive system,” IEEE Trans, Ind. Electron, Vol. 54, No. 3, pp. 1352-1364, Jun. 2007.
DOI
|
7 |
R. Dhaoudi, K. Kubo, and M. Tobise, “Two-degree offreedom robust speed controller for high-performance rolling mill drives.” IEEE Trans. Ind. Appl., Vol. 29, No. 5, pp. 919-926, Sep./Oct. 1993.
DOI
|
8 |
K. Sugiura and Y. Hori, “Vibration suppression on 2-and 3-mass system based on the feedback of imperfect derivative of the estimated torsional torque,” IEEE Trans. Ind. Electron., Vol. 43, No. 1, pp. 56-64, Feb. 1996.
DOI
|
9 |
A. V. Lipatov and N. I. Sokolov, "Some suficient conditions for stability and instability of continuous linear stationary systems," Automatic Remote Control, 1979, pp. 1285-1291, translated from Automaticka, iTelemekha-nika, No. 9, pp. 30-37, 1978.
|
10 |
R. W. Hejny and R. D. Lorenz, “Evaluating the practical low-speed limits for back-EMF tracking-based sensorless speed control using drive stiffness as a key metric,” IEEE Trans. Ind. Applicat., Vol. 47, No. 3, pp. 1337-1343, May/Jun. 2011.
DOI
|
11 |
A. Bahr and S. Beineke, "Mechanical resonance damping in an industrial servo drive," IEEE European Conf., Power Elec. and Appl., pp.1-10, 2007.
|
12 |
S. Manabe, "Sufficient condition for stability and instability by Lipatov and its application to be coefficient diagram method." 9th Workshop on Astrodynamics and Flight Mechanics, ISAS, 1999.
|
13 |
S. Manabe, "The coefficient diagram method," 14th IFAC Symposium on Automatic control in Aerospace, 1998.
|
14 |
S. Manabe, "Application of coefficient diagram method to MIMO system," 10th Workshop on Astrodynamics and Flight Mechanics, ISAS, 2000.
|
15 |
H. Kawaharada, I. Godler, T. Ninomiya, H. Honda, “Vibration suppression control in 2-inertia system by using estimated torsion torque,” IEEE IECON, Vol. 3, pp. 2219-2224, 2000.
|
16 |
Y. C. Kim, L. H. Keel, and S. P. Bhattacharyya, “Transient response control via characteristic ratio assignment,” IEEE Trans, Autom. Control, Vol. 48, No. 12, pp. 2238-2244, Dec. 2003.
DOI
|
17 |
I. U. Khan and R. Dhaouadi, “ Robust control of elastic drives through immersion and invariance,” IEEE Trans. Ind. Electron., Vol. 62, No. 3, pp. 1572-1580, Oct. 2014.
DOI
|
18 |
S. Manabe, “Controller design of two-mass resonant system by coefficient diagram method,” T. IEE Japan, Vol. lI8-D, No. 1, pp. S8-66, 1998.
|
19 |
S. E. Saarakkala and M. Hinkkanen, “State-space speed control of two-mass mechanical systems: Analytical tuning and experimental evaluation,” IEEE Trans. Ind. Appl., Vol. 50, No. 5, pp. 3428-3437, Sep./Oct. 2014.
DOI
|
20 |
S. E. Saarakkala, T. Leppinen, M. Hinkkanen, and J. Luomi, "Parameter estimation of two-mass mechanical loads in electric drives," Advanced Motion Control (AMC), 2012 12th IEEE International Workshop on. pp. 1-6, 2012.
|
21 |
K. Szabat, T. Tran-Van, and M. Kaminski, “A modified fuzzy luenberger observer for a two-mass drive system,” IEEE Trans. Ind. Informat., Vol. 11, No. 2, pp. 531-539, Jun. 2014.
DOI
|
22 |
J.-S. Ko, Y.-G. Seo, and H.-S. Kim, “Precision position control of PMSM using neural observer and parameter compensator,” Journal of Power Electronics. Vol. 8, No. 4, pp. 354-362, Oct. 2008.
|