Browse > Article
http://dx.doi.org/10.3795/KSME-A.2009.33.6.560

Estimations of the Adhesion Strength of Galvannealed Coatings on Coated Sheet Using Single Lap-Shear Test  

Lee, Jung-Min (한국국제대학교 자동차공학부)
Lee, Chan-Joo (부산대학교 정밀가공시스템공학)
Ko, Dae-Cheol (부산대학교 산학협력단)
Lee, Seon-Bong (계명대학교 자동차공학부)
Kim, Byung-Min (부산대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.33, no.6, 2009 , pp. 560-567 More about this Journal
Abstract
This paper was designed to estimate the adhesion strength of galvannealed coatings on steel sheets. The adhesion strength were evaluated using single lap - shear tests where the lap joint was bonded by structural adhesive. Tests were performed for overlap length of 5mm, 10mm and 15 mm and three directions (0, 45, 90) of steel sheets used as the adherend of the overlap joint. After the tests, FE simulations of the single lap-shear test were also carried out to observe the stress distribution in the interface between the adhesive and the coated sheet. The results showed that the joint failure loads obtained from the tensile tests of bonded single lap-joints were the same, regardless of overlap lengths and directions of steel sheets. Also, the failure of galvannealed coatings greatly depended on shear stress distribution in the interface and the value was about 30MPa.
Keywords
Adhesion Strength; Single Lap-Shear Test; Galvannealed Coating;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 Pak, S. W., 1991, 'Study on the Deformation Behaviour of Electrogalvanized Coatings,' PhD Thesis, Northwestern University, USA, Evanston
2 Kim, Y. S., Park, K. C. and Cho, J. O., 1991, 'Frictional Characteristics of Electro Zn-Ni Alloy Coated Steel Sheets,' J. of KSME A, Vol. 15, No. 6, pp. 1807-1818   과학기술학회마을
3 Marder, A. R., 2000, 'The Metallurgy of Zinc-Coated Steel,' Progress in materials science, Vol. 45, pp. 191-271   DOI   ScienceOn
4 HiRa, T., et al., 1993, 'Friction Behavior of Coated Steels in Sheet Forming,' J. of JSTP, Vol. 34, No. 393, pp. 1141-1146
5 Hayashi, H., 1993, 'Tribology in Sheet Metal Forming,' J. of JSTP, Vol. 34, No. 393, pp. 1114-1121
6 Hayashi, H., 1985, 'Behavior of Coating Layer in Forming of Galvanized Steel Sheet,' J. of JSTP, Vol. 26, No. 291, pp. 355-360
7 Kim, B. M., et al., 2006, 'Identification of the Bulk Behavior of Coatings by Nanoindentation Test and FESimulation and Its Application to Forming Analysis of the Coated Steel Sheet,' J. of KSME A, Vol. 30, No. 11, pp. 1425-1432   과학기술학회마을   DOI   ScienceOn
8 Adams, R. D., Wake W.C., 1997, 'Structural Adhesive Joint in Engineering,' Chapman & Hall, London
9 Urai, M., et al., 1997, 'Effect of Press-Forming Conditions and Coating Structure on Flaking Phenomenon in Galvannealed Steel Sheets,' Materials Technology for Automobiles, Vol. 47, No. 2, pp. 29-32
10 Rangarajan, V., et al., 1996, 'Influence of Strain State on Powdering of Galvannealed Sheet Steel,' Proceeding of SAE, pp. 63-70
11 Petrie E. M., 2007, 'Handbook of Adhesives and Sealants,' Mcgraw-Hill, New York
12 Yen, H. Y. and Tandjung D., 2005, 'Mixed Mode Fracture Analysis of the Lap Shear Specimen Test per ASTM D1002,' J. Reinforced Plastics and Composites, Vol. 24, pp. 839-853   DOI   ScienceOn
13 Hu, G., 1995, 'Mixed Mode Fracture Analysis of Adhesive Lap Joints,' Composite engineering, Vol. 5, pp. 1043-1050   DOI   ScienceOn
14 ASTM D1876-01
15 Lee, C. J. et al., 2008, 'The Evaluation of Surface and Adhesive Bonding Properties for Cold Rolled Steel Sheet for Automotive Treated by Ar/O2 Atmospheric Pressure Plasma,' J. of the KSME A, Vol. 32, No. 4, pp. 354-361   과학기술학회마을   DOI   ScienceOn