1 |
Samir, A. A. and Faisal, F. W., "Flexural behavior of high-strength fiber reinforced concrete beams", Structural Journal, Vol. 90, No. 3, 1993, pp. 279-287.
|
2 |
Oh, B. H., "Flexural analysis of reinforced concrete beams containing steel fibers", Journal of Structural Engineering, Vol. 118, No. 10, 1992, pp. 2921-2836.
|
3 |
Kang, S. -T., Kim, Y. -Y., Lee, B. -Y., and Kim, J. -K., "Fiber orientation impacts on the flexural behavior of steel fiber reinforced high strength concrete", Journal of the Korea Concrete Institute, Vol. 20, No. 6, 2008, pp. 731-739.
DOI
|
4 |
Kim, S. -H., Kwon, B. -U., and Kang, T. H. -K., "Seismic performance assessment of roof-level joints with steel fiberreinforced high-strength concrete", Journal of the Korea Concrete Institute, Vol. 28, No. 2, 2016, pp. 235-244.
DOI
|
5 |
Banthia, N., and Gupta, R., "Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete", Cement and Concrete Research, Vol. 36, No. 7, 2006, pp. 1263-1267.
DOI
|
6 |
Mechtcherine, V., Dudziak, L., and Schulze, J., "Internal curing by super absorbent polymers (SAP)-Effects on material properties of self-compacting fibre-reinforced high performance concrete", Int RILEM Conf on Volume Changes of Hardening Concrete: Testing and Mitigation, Lyngby, Denmark, 2006, pp. 87-96.
|
7 |
Nadelman, E., and Kurtis, K. "A resistivity-based approach to optimizing concrete performance", Concrete International, Vol. 36, No. 5, 2014, pp. 50-54.
|
8 |
Sherif, Y., and Christopher, Y. T., "Conductive concrete overlay for bridge deck deicing", Materials Journal, Vol. 96, No. 3, 1999, pp. 382-390.
|
9 |
Chen, P. -W., and Chung, D. D., "Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection", Smart Materials and Structures, Vol. 2, No. 1, 1993, pp. 22-30.
DOI
|
10 |
Whittington, H., McCarter, J., and Forde, M., "The conduction of electricity through concrete", Magazine of concrete research, Vol. 33, No. 114, 1981, pp. 48-60.
DOI
|
11 |
Chung, D., "Dispersion of short fibers in cement", Journal of Materials in Civil Engineering, Vol. 17, No. 4, 2005, pp. 379-383.
DOI
|
12 |
Akkaya, Y., Picka, J., and Shah, S. P., "Spatial distribution of aligned short fibers in cement composites", Journal of materials in civil engineering, Vol. 12, No. 3, 2000, pp. 272-279.
DOI
|
13 |
Konsta-Gdoutos, M. S., Metaxa, Z. S., and Shah, S. P., "Highly dispersed carbon nanotube reinforced cement based materials", Cement and Concrete Research, Vol. 40, No. 7, 2010, pp. 1052-1059.
DOI
|
14 |
Fu, X., Lu, W., and Chung, D. D. L., "Ozone treatment of carbon fiber for reinforcing cement", Carbon, Vol. 36, No. 9, 1998, pp. 1337-1345.
DOI
|
15 |
Chermant, J. -L., Chermant, L., Coster, M., Dequiedt, A. -S., and Redon, C., "Some fields of applications of automatic image analysis in civil engineering", Cement and Concrete Composites, Vol. 23, No. 2, 2001, pp. 157-169.
DOI
|
16 |
Akkaya, Y., Shah, S.P., and Ankenman, B., "Effect of fiber dispersion on multiple cracking of cement composites", Journal of Engineering Mechanics, Vol. 127, No. 4, 2001, pp. 311-316.
DOI
|
17 |
Kim, J. -K., Kim, J. -S., Ha, G. J., and Kim, Y. Y., "Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag", Cement and Concrete Research, Vol. 37, No. 7, 2007, pp. 1096-1105.
DOI
|
18 |
Wu, T., Huang, R., Chi, M., and Weng, T., "A study on electrical and thermal properties of conductive concrete", Computers and Concrete, Vol. 12, No. 3, 2013, pp. 337-349.
DOI
|
19 |
Woo, L. Y., Wansom, S., Ozyurt, N., Mu, B., Shah, S. P., and Mason, T. O., "Characterizing fiber dispersion in cement composites using AC-Impedance spectroscopy", Cement and Concrete Composites, Vol. 27, No. 6, 2005, pp. 627-636.
DOI
|
20 |
Xie, P., and J. J., Beaudoin, "Electrically conductive concrete and its application in deicing", ACI Special Publication, Vol. 154, 1995, pp. 399-418.
|
21 |
Sun, M., Li, Z., Mao, Q., and Shen, D., "Study on the hole conduction phenomenon in carbon fiber-reinforced concrete", Cement and Concrete Research, Vol. 28, No. 4, 1998, pp. 549-554.
DOI
|
22 |
Polder, R. B., "Test methods for on site measurement of resistivity of concrete-a RILEM TC-154 technical recommendation", Construction and Building Materials, Vol. 15, No. 2, 2001, pp. 125-131.
DOI
|
23 |
Fu, X., and Chung, D., "Improving the bond strength of concrete to reinforcement by adding methylcellulose to concrete", ACI Materials Journal, Vol. 95, 1998, pp. 601-608.
|
24 |
Xu, Y., and Chung, D., "Cement-based materials improved by surface-treated admixtures", ACI Materials Journal, Vol. 97, No. 3, 2000, pp. 333-342.
|
25 |
Yu, X., and Kwon, E. "A carbon nanotube/cement composite with piezoresistive properties", Smart Materials & Structures, Vol. 18, No. 5, 2009, pp. 1-5.
|
26 |
Sengul, O., and Gjorv, O. E., "Electrical resistivity measurements for quality control during concrete construction", ACI Materials Journal, Vol. 105, No. 6, 2008, pp. 541-547.
|
27 |
Zhang, X., Ding, X. Z., Ong, C. K., Tan, B. T. G., and Yang, J., "Dielectric and electrical properties of ordinary Portland cement and slag cement in the early hydration period", Journal of Materials Science, Vol. 31, No. 5, 1996, pp. 1345-1352.
DOI
|
28 |
Miao, C., Tian, Q., Ran, Q., and Liu, J., "Influence of polycarboxylate- based superplasticizer on the microstructure of concrete", 1st international conference on microstructure related durability of cementitious composites, Nanjing, China, 2008, pp. 13-15.
|
29 |
Puertas, F., Santos, H., Palacios, M., and Martinez-Ramirez, S., "Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes", Advances in Cement Research, Vol. 17, No. 2, 2005, pp. 77-89.
DOI
|