Browse > Article
http://dx.doi.org/10.4334/JKCI.2012.24.6.667

The Effect of Anchorage with Shear Reinforcement in Flat Plate System  

Choi, Chang-Sik (Dept. of Architectural Engineering, Hanyang University)
Bae, Baek-Il (Dept. of Architectural Engineering, Hanyang University)
Choi, Yun-Cheul (Dept. of Architectural Environmental Engineering and Building Service, Chung-Woon University)
Choi, Hyun-Ki (Dept. of Architectural Engineering, Hanyang University)
Publication Information
Journal of the Korea Concrete Institute / v.24, no.6, 2012 , pp. 667-675 More about this Journal
Abstract
Flat plate are being used more in buildings requiring a high level of technical installations or in buildings needing changeable room arrangements during their life time such as office buildings. The main problem in flat plate is its weak resistance against a punching failure at its slab-column connections. Therefore, in this research, an experimental study on full-scale interior slab-column connection was performed. Three types of shear reinforcements were tested to prevent brittle punching shear failure that could lead to collapse of the structure. A series of four flat plate specimens including a specimen without shear reinforcement and three specimens with shear reinforcements were tested. The slabs were tested up to failure using monotonic vertical shear loading. The presences of the shear reinforcements substantially increased punching shear capacity and ductility of the interior slabcolumn connections. The test results showed that a slab that did not have enough bond length failed before shear reinforcement yielded due to anchorage slip. Also, FEM analyses were performed to study an effect of slab thickness and concrete compressive strength on the flat plate slab. The analytical study results were used to propose a method to calculate performance capacity of shear reinforcement in slab-column connection.
Keywords
flat plate; shear reinforcement; effective anchorage length; slab depth; concrete strength;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 ACI-ASCE Committee Report, "Recommendations for Design of Slab-Column Connections in Monolithic Reinforced Concrete Structures," ACI Structural Journal, Vol. 85, No. 6, 1988, pp. 675-696.
2 Korea Concrete Institute, Concrete Design Code, Kimoondang Publishing Company, Seoul, Korea, 2007, pp. 452-455.
3 ACI Committe 318, Building Code Requirements for Structural Concrete (ACI 318R-05), American Concrete Institue, USA, 2004, pp. 156-160.
4 Park, H. G., Kim, Y. N., Song, J. K., Kim, S. K., and Lee, C. W., "Lattice Shear Reinforcement for Slab-Column Connection Subjected to Unbalanced Moment," Journal of the Korea Concrete Institute, Vol. 19, No. 3, 2007, pp. 301-312.   과학기술학회마을   DOI   ScienceOn
5 Robertson, I. N., Kawai, T., Lee, J., and Enomoto, B., "Cyclic Testing of Slab-Column Connections with Shear Reinforcement," ACI Structural Journal, Vol. 99, No. 5, 2002, pp. 605-613.
6 Ghali, A. and Hammill, N., "Effectiveness of Shear Reinforcement in Slabs," Concrete International, 1992, January, pp. 60-65.
7 Mortin, J. D. and Ghali, A., "Connection of Flat Plates to Edge Connections Subjected to High Moments," Canadian Journal for Civil Engineering, Vol. 25, 1998, pp. 526-538.   DOI
8 Salakawy, E. F. EI, Polak, M. A., and Soliman, M. H., "Slab- Column Edge Connections Subjected to High Moments," Canadian Journal for Civil Engineering, Vol. 25, 1998, pp. 526-538.   DOI
9 Megally, S. and Ghali, A., "Seismic Behavior of Edge Column- Slab Connections with Stud Shear Reinforcement," ACI Structural Journal, Vol. 97, No. 1, 2000, pp. 53-59.
10 Elgabry, A. A. and Ghali, A., "Tests on Concrete Slab-Column Connections with Stud-Shear Reinforcement Subjected to Shear-Moment Transfer," ACI Structural Journal, Vol. 84, No. 5, 1987, pp. 433-442.
11 Limand, F. K. and Rangan, B. V., "Studies on Concrete Slabs with Stud Shear Reinforcement in Voconity of Edge and Corner Columns," ACI Structural Journal, Vol. 92, No. 5, 1995, pp. 515-525.
12 Hammil, N. and Ghali, A., "Punching Shear Resistance of Corner Slab-Column Connections," ACI Structural Journal, Vol. 91, No. 6, 1994, pp. 697-707.
13 Choi, H. K., Kim, J. S., Choi, Y. C., Back, Y. S., Jin, E. S., and Choi, C. S., "Study on Flat Plate-Column Connection for Shear Reinforcement," Journal of the Architectural Institute of Korea, Vol. 24, No. 8, 2008, pp. 21-28.   과학기술학회마을
14 Alsiwat, J. M. and Saatcioglu, M., "Reinforcement Anchorage Slip under Monotonic Loading," Journal of Structural Engineering, ASCE, Vol. 118, No. 9, 1992, pp. 24-39. (doi: http://dx.doi.org/10.1061/(ASCE)0733-9445(1992)118:9(2421))   DOI
15 Choi, H. K., Beck, S. W., Choi, Y. C., and Choi, C. S., "Shear Reinforcement of Flat Plate Exterior Slab-Column Connection," Journal of the Architectural Institute of Korea, Vol. 24, No. 5, 2008, pp. 35-42.   과학기술학회마을
16 Dilger, W. H. and Ghali, A., "Proposed Revisions to: Building Code Requirements for Reinforced Concrete," Journal of American Concrete Institute, Vol. 86, No. 5, 1989, pp. 326-329.
17 Regan, P. E. and Long, A. E., "Predicting the Enhanced Punching Strength of Interior Slab-Column Connections," Proceedings of the Institution of Civil Engineering, Part 1, Vol. 82, 1987 pp. 1165-1186.   DOI
18 Hognestad, E., "A Study of Combined Bending and Axial Load in Reinforced Concrete Members," Bulletin No. 399, Engineering Experimental Station University of Illinois, Urbana, Illinois, Vol. 49, No. 22, 1951, pp. 55-87.
19 Ottosen, N. S., "A Failure Criterion for Concrete," Journal of the Engineering Mechanics Division, Vol. 103, No. EM4, 1977, pp. 527-535.
20 CEB-FIP Model Code 1990, Design Code, Thomas Telford, Lausanne, Switzerland, 1993, pp. 174-184.
21 Austin, D. P. and Moehle, J. P., "An Experimental Study of Slab-Column Connection," ACI Structural Journal, Vol. 89, No. 6, 1992, pp. 626-638.
22 Broms, C. E., "Shear Reinforcement for Deflection Ductility of Flat Plates," ACI Structural Journal, Vol. 87, No. 6, 1990, 548 pp.
23 Buetel, R. and Hegger, J., "Punching Shear Resistance of Shear Reinforced Flat Slabs," Cement and Concrete Composites, No. 24, 2002, pp. 539-549.
24 CEB-FIP, Punching of Structural Concrete Slabs, CEB-Bull, 12, April 2001, pp. 215-284.
25 Yamade, T., Nanni, A., and Endo, K., "Punching Shear Resistance of Flat Slab: Influence of Reinforcement Type and Ratio," ACI Structural Journal, Vol. 89, No. 4, 1992, pp. 555-564.