Browse > Article
http://dx.doi.org/10.4150/KPMI.2007.14.6.380

Magnetic Pulsed Compaction and Sintering Characteristics of Al Composite Powders Reinforced with Waste Stainless Steel Short Fibers  

Hyun, Chang-Yong (Department of Materials Science and Engineering, Seoul National University of Technology)
Won, Chul-Hyun (Department of Materials Science and Engineering, Seoul National University of Technology)
Park, Jae-Soon (Korea Atomic Energy Research Institute)
Publication Information
Journal of Powder Materials / v.14, no.6, 2007 , pp. 380-385 More about this Journal
Abstract
Characteristics of Al-based composites with waste stainless steel short fiber, fabricated by magnetic pulsed compaction and sintering were investigated. The compacts prepared by magnetic pulsed compaction showed high relative density and homogeneous microstructure compared with that by conventional press compaction. The relative density of sintered composites at $430^{\circ}C$ for 1 h exhibited the same value with compacts and decreased with increase in STS short fiber content. The reaction between Al and STS phase was confirmed by the microstructural analysis using EDS. The sintered composites, prepared by magnetic pulsed compaction, showed increased hardness value with increasing STS fiber content. Maximum yield strength of 100 MPa and tensile strength of 232 MPa were registered in the AI-based composite with 30 vol% STS short fiber.
Keywords
Al matrix composite; Stainless steel short fiber; Magnetic pulsed compaction; Sintering; Microstructure;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 F. Tang, I. E. Anderson, T. Gnaupel-Herold and H. Prask: Mater. Sci. Eng. A, 383 (2004) 362   DOI   ScienceOn
2 G. H. Lee, C. K. Rhee, M. K. Lee, W. W. Kim and V. V. Ivanov: Mater. Sci. Eng. A, 375-377 (2004) 604   DOI   ScienceOn
3 L. C. Steams, J. Zhao and M. P. Harmer: J. Eur. Cer. Soc., 10 (1992) 473   DOI   ScienceOn
4 Y. Genma, Y. Tsunekawa, M. Okumiya and N. Mohri: Mater. Trans. JIM, 38 (1997) 232   DOI
5 S.-H. Lee and H.-W. Kim: J. Korean Powder Metall. Inst., 13 (2006) 39 (Korean)   과학기술학회마을   DOI   ScienceOn
6 R. B. Bhagat: Metall. Trans. A, 16 (1985) 623   DOI
7 D. Mandal, B. K. Dutta and S. C. Panigrahi: Wear, 257 (2004) 654   DOI   ScienceOn
8 J. K. Lee, S. J. Hong, M. K. Lee and C. K. Rhee: J. Korean Powder Metall. Inst., 12 (2005) 345 (Korean)   DOI   ScienceOn
9 J.-H. AIm, Y. Choi and D. Kwon: J. Kor. Inst. Met. & Mater., 38 (2000) 1606 (Korean)
10 J.-I. Jang, D. Son, Y. Choi, D. Kwon, S.K. Park and W.S. Kim: Journal of KWS, 20 (2002) 160 (Korean)
11 G. H. Lee, C. K. Rhee, W. W. Kim, J. W. Yun and K. S. Lee: J. Korean Powder Metall. Inst., 12 (2005) 24 (Korean)   DOI   ScienceOn
12 I. J. Polmear: Light Alloys-Metallurgy of the Light Metals, Butterworth-Heinemann, London (1995) 325
13 R. P. Baron, J. A. Wert, D. A. Gerard and F. E. Wawner: J. Mater. Sci., 32 (1997) 6435   DOI
14 Young Ho Kim: M. S. Thesis, Seoul National University of Technology, (2006) (Korean)