Browse > Article

Research for Design and Characteristic Interpretation of Capacitive Pressure Sensor Structure  

Park, Chang Yong (Department of Mechanical System, Kumoh National Institute of Technology)
Kweon, Hyun Kyu (Department of Mechanical System, Kumoh National Institute of Technology)
Zhao, Zhi Jun (Department of Mechanical System, Kumoh National Institute of Technology)
Publication Information
Journal of the Semiconductor & Display Technology / v.14, no.2, 2015 , pp. 1-7 More about this Journal
Abstract
In this paper, a new capacitive pressure sensor has been proposed for a displacement measurement. The new sensor is mainly composed of a gap of $5{\mu}m$ and a notch of $1{\mu}m$. And the sensor has the performance as the high sensitivity and capacitance compared with a commercial capacitive sensor. Therefore, the advantages of the new capacitive pressure sensor are good sensitivity in normal range, mechanically robust and large overload protection. The analytical model is induced for confirming the performance of the proposed sensor. In addition, FEM (finite elements method) simulation has been performed to verify the analytical model. Firstly, the displacement characteristics of diaphragm membrane were simulated by the analytical model and FEM in the case of different structure and materials. At last, through this analysis, these simulation results can be predicted the change of the performance when the device parameters are varied. And it is used as a design tool to achieve at a set of performance we desired.
Keywords
Capacitive Pressure Sensor; Circular Diaphragm Modeling; FEM; Sensitivity; Notch Structure;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Seo, J. H., Noh, S. S., & Kim, K. H., "Characteristics of surface Micromachined Capacitive Pressure Sensors For high temperature applications," J. of the Korean Institute of Electrical and Electronic Material Engineers, Vol. 23, pp. 317-322, 2010.   DOI
2 Meng, G. & Ko, W. H., "Modelling of circular diaphragm and apreadsheet solution programming for touch mode capacitive sensors," Sensors & Actuators A, Vol. 75, pp. 45-52, 1999.   DOI
3 Gong, S. C. & Lee, C., "Analytical Solutions of Sensitivity for Pressure Microsensor," IEEE Sensors Journal, Vol. 1, pp. 340-344, 2001.   DOI
4 He, F., Huang, Q. A., & Qin, M, "A silicon directly bonded capacitive absolute pressure sensor," Sensors & Actuators A, Vol. 135, pp. 507-517, 2007.   DOI
5 Timoshenko, S. & Woinowsky-Krieger, S., "Theory of Plates and Shells," New York, McGraw-Hill, 1959.
6 Wen, H. Ko & Wang, Q., "Touch mode capacitive pressure sensors," Sensors & Actuators A, vol. 75, pp.242-251, 1999.   DOI
7 Jeffrey Y., Pan, P. L., Fariborz, M., & Stephen D. S., "verification of FEM analysis of load-edflection methods for measuring mechanical properties of thin film," IEEE Solid-State Sensors & actuators Workshop 1990, pp.70-73.
8 Ettouhami, A., Zahid, N., & Elbelkacemi, M., "A novel capacitive pressure sensor structure with high sensitivity and quasi-linear response," Comptes Rendus Mecanique, Vol. 332, pp. 141-146, 2004.   DOI
9 Young, D. J., Du, J., Zorman, C. A., & Ko, W. H., "High-temperature single-crystal 3C-SiC capacitive pressure sensor.," Sensors Journal, IEEE, Vol. 4, pp. 464-470, 2004.   DOI
10 Tsouti, v., Bikakis, G., & Chatzandroulis, S., "Impact of structural parameters on the performance of silicon micromachined capacitive pressure sensors," Sensors & Actuators A, Vol. 137, pp. 20-24, 2007.   DOI
11 Fragiacomo, G., Ansbæk, T., Pedersen, T., Hansen, O., & Thomsen, E. V., "Analysis of small deflection touch mode behavior in capacitive pressure sensors," Sensors & Actuators A: Physical, Vol. 161, pp. 114-119, 2010.   DOI