|
1 |
Fabrication and Optical Characterization of Porous Silicon Nanowires
Kim, Jungkil;Choi, Suk-Ho;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.855-859,
|
|
2 |
Effect of wear of Contact Tips to Welding Consumable for Gas Metal Arc Welding
Kim, In-Gyu;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.860-864,
|
|
3 |
Collapse Characteristics of CFRP hat Shaped Structural Member with Various Orientation Angle for a Use of Lightweight
Hwang, Woochae;Yang, Yongjun;Yang, Inyoung;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.865-870,
|
|
4 |
A Study on Surface Integrity in Hard Turning
Lee, Han Gyo;Shin, Hyung Gon;Yoo, Seung Hyeon;Kim, Tae Young;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.871-877,
|
|
5 |
Anti-Sway Tracking Control of Container Cranes with Friction Compensation
Baek, Woon-Bo;Shin, Jin-Ho;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.878-884,
|
|
6 |
Structural Analysis of Booms and Basket in the Multi-aerial Platform
So, Soo-Hyun;Kang, Sung-Soo;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.885-891,
|
|
7 |
Strength Evaluation on CFRP Hat-shaped Sectional Members According to Changes in Temperature Under Hygrothermal Environment
Yang, Yongjun;Kook, Hyun;Yang, Inyoung;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.892-896,
|
|
8 |
Durability Performance Analysis of a Differential Gear for a Low Speed Vehicles
Cheon, Jong-Pil;Pyoun, Young-Sik;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.897-902,
|
|
9 |
A Study on the Characteristics of Temperature Distribution according to Material and Position of Filter in a Diesel Particulate Filter
Kim, Gyu-Sung;Park, Sung-Cheon;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.903-909,
|
|
10 |
A Study on Indications in Radiographic Tests in Welding Specimens According to Shielded Amounts of ATOS 80 High-strength Steel
Baek, Jung-Hwan;Choi, Byung-Ky;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.910-914,
|
|
11 |
A Study on the Radiograph Inspection of Specimen in Welding Pass Using ATOS 80 High-strength Steel
Baek, Jung-Hwan;Choi, Byung-Ky;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.915-919,
|
|
12 |
A Study on the Structural Design of Effective Composite Joint and Light Weight in Body Floor
Kim, Hong Gun;Oh, Sang Yeob;Kim, Kwang Choul;Kim, Hyun Woo;Kwac, Lee Ku;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.920-925,
|
|
13 |
The Research on Development and Performance of the Rotary bar Cutting tool
Seo, Jeong-Hwan;Yang, Hae-Jeong;Kim, Kwang;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.926-931,
|
|
14 |
A Study on the Mechanical Properties of the Friction Welding with Solid Shaft of SM45C
Koo, Keon Seop;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.932-937,
|
|
15 |
A Study on Characteristic of Residual Stresses in a wind Tower Using the Tandem Circumferential Welding Process
Kim, Ji Sun;Kim, In Ju;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.938-945,
|
|
16 |
A Study on Development of High Efficiency Toilets with VOF Numerical Analysis
An, Il Yong;Lee, Young Lim;Jo, Woo Suck;Kim, Jin Ho;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.946-953,
|
|
17 |
Approximate Multi-Objective Optimization of Robot Casting Considering Deflection and Weight
Choi, Ha-Young;Lee, Jongsoo;Park, Juno;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.954-960,
|
|
18 |
Design of Air-Conditioner Frame Structure Using TRIZ Based Contradiction Analysis
Choi, Ha-Young;Jeong, Yiemoon;Lee, Jongsoo;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.961-967,
|
|
19 |
A Study on the Antiabrasion of the Aircraft Carbon Disk Brake
Lee, Jang-Hyun;Yum, Hyun-Ho;Hong, Min-Sung;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.968-975,
|
|
20 |
A Study on the Physical Property of Epoxy Resin Due to After-Curing Condition
Han, Jeong-Young;Kim, Myung-Hun;Kang, Sung-Soo;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.976-981,
|
|
21 |
A Study on Machinability Evaluation of Inconel 718 in Flat End Milling
Jeong, Jihoon;Kwon, Haewoong;Koo, Joonyoung;Kim, Pyeongho;Kim, Jeongsuk;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.982-987,
|
|
22 |
Characteristics of Surface Hardening of Nd:YAG Laser According to Temperature Changes of SM45C
Lee, Ka-Ram;Yang, Yun-Seok;Hwang, Chan-Youn;Yoo, Young-Tae;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.988-997,
|
|
23 |
A Study on the Behavior of Bubbles Trapped in the In-Mold Coating Process
NguyenThi, Phuong;Kwon, Arim;Yoo, Yeong-Eun;Yoon, Jae Sung;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.998-1002,
|
|
24 |
Characterization of Fiber Direction Influence in CFRP Composites Using Advanced NDE Techniques
Im, Kwang-Hee;Jang, Ju-Hwan;Back, Chong-Gui;Jeong, Ok-Su;Hsu, David K.;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.1003-1007,
|
|
25 |
Determination of Thermal Contact Conductance of an Injection Mold Assembly for the Prediction of Mold Surface Temperature
Lee, Ki-Yeon;Kim, Kyeong-Min;Park, Keun;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.1008-1012,
|
|
26 |
Nondestructive Evaluation of the Defects in Composite-sintered Bushes Using Ultrasonics
Im, Kwang-Hee;Kim, Ki-Youl;Shin, Ki-Taek;Lee, Han-Hee;Jung, Il-Woong;Kang, To;Cho, Hyun-Joon;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.1013-1017,
|
|
27 |
Strength and Efficiency during Lap Joining Molding of GMT-sheet
Kim, Jin-Woo;Kim, Hyoung-Seok;Kim, Tae-Ik;Lee, Dong-Gi;Sim, Jae-Ki;
/
The Korean Society of Manufacturing Technology Engineers
, v.21, no.6, pp.1018-1023,
|
|