권호 표지

Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering

  • Quarterly
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

Domain

  • Economics/Management ＞ Business Strategy/Ethics

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

Volume 14 Issue 23

  1. 강인선;윤덕균 1
    PDF
    The physical distribution service(PDS) is essential to evaluate the business logistics system. The PDS combines the inventory service with the lead time to deliver. This paper is presented to model Mixed Zero-One integer programming which is to determine distribution center location and to allocation products, considering delivery lead time, from given candidate locations to given customer markets. A numerical example is given to demonstrate the applicability of Mixed Zero-One integer programming for Distribution-Location problem.
  2. Park, Myeong-Kyu 7
    PDF
    인체의 운동은 많은 수의 자유도를 지닌 조인트(JOINT)와 링(LINK)의 복잡한 운동으로 표현될 수 있다. 이들 링크(LINK)의 회전 운동은 SINE, COSINE 자승 형태의 비선형 운동으로 이루어져있으나, 최근 PERSONAL COMPUTER의 발달로 복잡한 인체 운동의 수학적 모델에 대한 동력학적 DATA 계산이 가능해졌다. 본 연구에서는 5개의 링크(LINK)로 연결된 인체 움직임에 있어 링크(LINK)의 절대 운동(ABSOLUTE MOTION) 및 상대운동(RELATIVE MOTION)을 고려한 PLAGENHOEF의 운동 모델을 PERSONAL COMPUTER를 이용하여 인체 움직임의 동력학적 DATA를 얻을 수 있도록 BASIC 언어로 프로그램을 제기하였다.
  3. 서순근;최종덕 19
    PDF
    In this paper, constrained resource project scheduling problems schedule project activities subject to finite constraints on the availability of non-storable resource. Further, resources are assumed to be available per period in constant amounts, and are also demanded by an activity in constant amounts throughout the duration of the activity. We describe formulation which minimizes the combined cost of fluctuations in resource demand and delay of project completion. Cost bounding procedures are augmented by dominance relationships presented as theorems. This paper presents algorithm for solving the problem. And numerical examples are presented. Sensitivity analysis to evaluate the effect of changes of cost efficients is conducted.
  4. 오명진;이상도 27
    PDF
    This paper considers scheduling a set of n-jobs on m-paraller identical processors in which all jobs have the common due date. The objective of the problem is to minimize the weighted mean absolute deviation of job completion times about such common due dates under the assumption that each job has a different weight. and to determine the optimal value of a common due date. We propose four heuristic solution methods based on several dominance conditions, and its solution procedure is illustrated with numerical examples. The Performance comparison is made among four heuristic scheduling procedures.
  5. 고관명;이근희 37
    PDF
    This study deals with the designing of vehicle pedal considering simple reaction time of visual information. Because vehicle accidents may bring about fatal results, the vehicle design which is considered with safity is very important. Though the vehicle design considered with safity is important in the whole parts of vehicle, the designing of pedal which is directly connected the designing of pedal which can minimize reaction time to risk through simple experiments. In the experiments, the experience of driving, the location of brake pedal and the space between brake and accelerator pedal are considered. Using experiment equipment and IBM-PC, simple reaction time was measured. The data which was result from measurement was analyzed with SPSS/PC+. When brake pedal located right side and the space between brake and accelerator pedal was 35cm, reaction was minimized. Based on this results, the vehicle pedal should be designed.
  6. 김승영;이근희 47
    PDF
    In automated assembly line, an automatic guided vehicle system(AGVS) represents a mire versatile means of moving materials automatically. In this paper, the vehicles not only provide the transportation medium between workstations but also as mobile workstations. The objective for the developed model is the determination of the appropriate time to control AGV based assembly line in order to minimize production makespan while maximizing the efficient use of vehicles. In this paper, we consider the finished goods of two types which are produced in assembly line. The assembly line is considered with and without queue. Because no buffer are present in case 1. this model seeks to determine the point in time at which vehicles should be launched in the assembly line without experiencing a delay. The case 2 model also seek to determine the vehicle launch times while minimizing production makespan. The assumption in this model is that the maximum queue size cannot exceed 1 at any time.
  7. 이종만;이근희 57
    PDF
    The preliminary, advanced and final evaluation of R&D project is essential in order to reduce loss of resource and opportunity and to minimize uncertainty resulting from optimal selection and efficient progress of R&D project. This thesis examined characteristics of deterministic evaluation, economical evaluation, and OR-approach evaluation as theoretical methodology of evaluation of R&D project applicable to food industry in Korea by using scoring method, one of deterministic evaluations. In addition, this thesis divided the evaluation factors for preliminary evaluation of R&D project into 5 groups and 30 factors on basis of the environment of domestic companies and set up the standard of each evaluation factors and contains marking-selecting way. But, generally, the evaluation model by this thesis, as the conditions of the business company environment are different to each other, contents to be set up evaluation factors, evaluation standard and decision method conforming to each the environment of the business companies with referring to as one standard of evaluation project for selecting R&D project.
  8. 노인규;이정환 65
    PDF
    This paper is concerned with a flow-shop scheduling problem for all jobs having the common due date using V-Shape penalty cost function for earliness and lateness. The objective of the paper is to develop an efficient heuristic scheduling algorithm for minimizing total penalty cost function and for determining the optimal common due date. In addition, the between-job-delay for two machines are considered for developing the algorithm. A numerical example is given for illustrating the proposed algorithm.
  9. 이근희;안문영 71
    PDF
    Investment in FA facilities has been accerelated since 1986, turning point by labor strife in Korea firms. Most commonly adopted automation tech, in their manufacturing process consists of NC. Robotics, PLC, CAD/CAM now on and further confused system oriented FMS, CIM, etcs. undergoing. But for all their remarkable notices in manufacturing systems, The competitive position on product cost, quality, shorten delivery and profit has never been recovered in global swing market. To make some empirical suggestions with a view to competitive strategy of Korea firms by FA, to the conclusion largely FA tech. adoption can be justified only when its application on new product productions and improved the structure of products comparatively. Because of when it was applied in old production process. The effectiveness is very doubtful to the lacks of consistent and integrate manufacturing policy with the strategy of the fim and their poor standardization level in shop floors.