The Hyundai Rotem company is due to be conducted the main line Speed Qualification Test as regulated by CFR for SEPTA EMU and SCRRA Bi-level coach project. The regulated test items per 49CFR213.345 are wheel/rail interaction forces and carbody/truck accelerations during running on main line. Therefore the special two sets of instrumented wheelset (IWS) per each project have been made for measuring the interaction forces between wheel and rail at four wheels of one truck during running on main line. In this paper, regarding Speed Qualification Test, the required test items and data analysis method per 49CFR213.345 and the preparation status of instrumented wheelsets (IWS) are introduced.

철도소음은 공기역학적 소음, 차륜과 레일의 상호작용에 의한 전동소음과 고가구조음으로 나눌 수 있다. 열차의 속도한계에 의해 재래철도의 주소음원은 전동음이라고 알려져 있으며, 전동음에 대한 많은 연구가 이루어졌다. 또한 전동음을 주소음원으로 하여 철도소음에 대한 예측모델을 제시하고, 철도소음의 전파특징에 대한 연구가 다수 이루어졌다. 또한 근래에는 고가선로에 대한 고가진동음에 대한 연구가 진행되고 있다. 한편, 본 연구에서는 국내 고가철교에 거의 설치되어 있지 않은 방음터널에 대한 효과를 파악하고 앞으로 설치가 예상되는 고가철교 방음터널에 대한 설계 자료를 확보하기 위한 기초연구를 수행하였다.

This presentation examines the characteristics of torsional vibration in axisymmetric out-of-plane vibrations of an annular Mindin plate. The out-of-plane vibration of circular or annular plates have been investigated since a long years ago by many researchers. When the classical Kirchhoff plate theory neglecting the effect of transverse shear deformation is applied to a thick plate, its out-of-plane natural frequencies are much different from reality. And so, since Minlin presented a plate theory considering the effect of rotary inertia and transverse shear deformation, many researches for the out-of-plane natural vibration of circular or annular Mindin plates have been performed. But almost all researchers missed the torsional vibration due to transverse shear deformation in axisymmetric out-of-plane vibrations of the circular or annular Mindin plate. Therefore, in this presentation, we verify the existence of torsional vibration of an annular plate and present the natural frequencies of an annular plate with free outer boundary surface.

철도차량의 동특성 해석을 위한 기존의 연구는 대부분 2차원 접촉해석에 근거한 근사해법에 의존해 왔다. 최근에 휠-접촉해석에 대한 정확한 해를 구하기 위해 3차원적 접근방법이 제시되고 있지만, 계산시간의 과다로 인해 실제 시뮬레이션 적용에는 효과적이지 못했다. 본 연구의 주요 관점은 효율적인 3차원 휠-레일 접촉 해석을 통해 휠-레일 접촉력을 계산하여 철도차량의 동특성 해석의 새로운 방법을 제시하고자 하는 것이다. 이를 통해, 3차원 휠-레일 접촉해석 및 휠셋의 동적 계산식이 제시된다.

Safety of railroad is result of reliability which is received from test & evaluation of system. Railroad system is consisted of various sub system such as vehicle, supply of electric power, signal, communication, rail track construction, operation. To secure safety of railroad, evaluation about parts, assembly, sub system, whole system etc.. that compose railroad is essential. In this paper, I wish to describe for results that analyze korean tilting vehicle's derailment coefficient developed by national research achievement. Confirmed that is possible even if speed up, curved line department running speed that estimate korean tilting vehicle's running safety in curved line track of Jungang Line about 20 km/h than present operating speed.

The railway vehicle is a multi-body system running on the track which consists of carbody, bogie and wheelset, each of components is connected with rigid mass, spring and damper. each of components has translation motions of longitudinal (X axis), lateral(Y axis) and vertical(Z axis) direction, and rotation motions of X, Y, Z axis which are named Rolling, Pitching and Yawing. The vibration mode of railway vehicle is difficult to find the characteristics of motion during the operation on the track because these happen to independence or duplication motion caused by vehicle, wheel/rail and track irregularity etc. This paper presents the result of ramp test to show the bounce, roll, pitch and yaw mode frequency of the railway vehicle.

In recent society, the electricity is so essential for the human lives. Lots of modern people take many cultural benefits owing to the development of the power systems, the cell phone, the electrical appliances, and etc. However, the problems related to the electromagnetic field generate as the side effects. Examples are the fault in the electric machinery due to the electromagnetic coupling, the fault in the communication devices due to the electromagnetic field around the power line equipments, and the effect upon the human beings due to the electromagnetic field, and etc. In this paper, we induce the vector equation about the magnetic field based on Biot-Savart law. We calculate the magnetic field at the surface of the high speed train with this induced equation and the current in the high speed railroad catenary wire. Finally, we calculate the magnetic field in the high speed train considering the material property like the permeability, the conductivity, and so on.

In this paper, we analyzed the frequency spectrum of radiated electromagnetic waves generated by series arc- and corona- discharges as a basic study to develop an online diagnostic technique for power facilities installed inside switchboards. To simulate corona and series arc discharges, an arc generator specified in UL1699 and a corona generator were fabricated. The experiment was carried out in an electromagnetic shielding room, and the measurement system consists of an Ultra Log Antenna and an EMI Test Receiver. The frequency spectrum exists in ranges from 30 to 500 [MHz] for series arc discharge and 30 [MHz] to 2 [GHz] depending on defects for corona discharge. The peak frequency of series arc discharge and corona were 40 [MHz], 80 [MHz] and 35 [MHz]~160 [MHz], respectively.

Fiber Reinforced Plastic (FRP) insulator has a higher performance than porcelain. It is only used in domestic AC 25 kV electric railway system. Seoul Metro has developed DC 1500 V FRP insulator since 2008. FRP support insulator of flexible property is affected by the wind in tunnel. A wind tunnel test was carried out to measure influence on the insulator housing when the train passed by. The test results showed that the wind which is resulted from the passing train had a little impact on the FRP insulator shed movements.

Various installation faults may lie in fasteners in the construction of a direct-fixation track by the top-down method. At an extreme, they may cause excessive interaction between the train and track, compromise the running safety of the train, and cause damage to the track components. Therefore, the faults need to be kept within the allowable level through an investigation of their effects on the interactions between the train and track. In this study, the vertical dynamic stiffness of fasteners in installation faults was measured based on the dynamic stiffness test by means of an experimental apparatus that was devised to feasibly reproduce gap faults. This study proposes an effective analytical model for a train-track interaction system in which most elements, except the nonlinear wheel-rail contact and some components that behave bi-linearly, exhibit linear behavior. To investigate the effect of the behavior of fasteners in gap faults in a direct-fixation track on the vehicle and track, vehicle-track interaction analyses were carried out, targeting key review parameters such as the wheel load reduction factor, vertical rail displacement, rail bending stress, and mean stress of the elastomer. From the results, it was noted that the gap faults in the concrete bearing surface of a direct-fixation track need to be limited for the sake of the long-term durability of the elastomer than for the running safety of the train or the structural safety of the track.

HEMU-400X train have been developed and will be operated over 350km/h. In this paper, the influence of vertical alignment on running behavior and safety for HEMU-400X train was instigated by numerical analysis. The wavelength and amplitude of vertical alignment were considered in scenario of this numerical analysis. This research is based on just numerical analysis and the final result which include measurement will be published in the future.

장대레일 교체주기는 자갈궤도 레일두부 표면요철과 레일 휨피로의 상관관계 분석을 통해 산정되었다. 본 연구에서는 실물 레일 휨 피로시험을 통한 레일의 S-N선도, 국내 도시철도(서울메트로) 콘크리트궤도에서 발생하는 레일 휨응력 예측식, Haibach's rule을 통해 콘크리트궤도 장대레일의 휨 피로수명을 평가하였다. 여기서, 레일용접방법별 S-N선도와 레일표면요철, 열차운행속도가 고려되었다. 또한, S-N선도 파괴확률 1%, 0.1%, 0.01%를 고려한 휨 피로수명을 비교하였다. 따라서 본 연구에서는 콘크리트궤도 장대레일의 휨 피로수명을 제안하였다.

한국국철은 1966년 경부선에서 1.8km의 장대레일을 부설한 이래, 레일 장대화 개량사업을 지속적으로 확대하고 있으며 최근에 착공하거나 계획 중인 주요본선은 전면 장대화하도록 권장하여 부설지역이 광범위해지고 부설률이 증가함으로써 장대레일 관리가 한층 중요하게 되었다. 그러나 최근에는 산업화, 도시화 과정에서 과다 배출된 이산화탄소 등의 온실효과로 등 지구온난화에 따른 장대레일 작업가능시기 단축, 재설정 등 장대레일 작업의 대폭 증가에 대응하여 제한된 유지보수인력, 낙후된 기술과 장비로 장대레일을 적기에 관리는 매우 힘들어 효율적인 장대레일 관리대책이 요구되고 있다. 이러한 관점에서 전국 주요 간선철도 지역의 기후변화와 장대레일 설정온도, 지점별 대기온도 관련 기상자료, 각종 장대레일 관리기준, 한국국철의 안전사고, 장애기록, 절손현황, 기존의 레일 온도측정치, 장대레일 연구자료 등을 종합 분석하고 레일긴장기 소요성능을 검토한 결과, 철도현장에 주로 사용하고 있는 70Ton급 긴장기는 영하온도대역의 긴장력 및 설정연장 1km 이상의 경우 성능에 여유가 없을 것으로 분석되었다. 따라서 1회 설정구간을 과다하게 계획하지 말고, 기온이 영상으로 올라가 레일용접이 가능한 적정시점을 택하여, 레일온도와 설정온도차를 최대한 줄이는 것이 바람직 할 것으로 판단되었다.

인천공항철도는 인천공항철도의 허브화 전략에 따라 당시 경쟁공항(간사이, 첵랩콕 등) 수준의 접근성 확보를 위해 건설을 추진하였으며, 현재 1단계(인천공항~김포공항, 40.3km)는 '07.3월 개통하여 운영중이며, 2단계(김포공항~서울역, 20.7km)는 '10.10월말에 개통예정으로 있으나, 인천공항철도가 서울역에서만 이용이 가능하도록 계획되어 있어 접근성이 불리하고, 운행속도가 최대 110km/h 수준으로 공항버스 등과 비교할 때 시간경쟁력이 부족하며, 현재 운행 중인 고속철도와 서울역에서 추가적으로 환승하여야 하는 등의 이유로 현재 1단계 운영구간의 공항철도 이용수요가 저조(7%)하며, 수요에 대한 재예측 결과 또한 협약대비 수요가 부족한 것으로 분석되어 국가가 부담하여야할 보조금이 연평균 4천억원 수준에 달하여, 국가에서는 한국철도공사가 민간지분을 매입 보조금 규모를 축소하는 대책을 마련하였음에도 불구하고, 상당한 규모의 보조금지급(연평균 2천억원)이 불가피한 실정에 있어 수요증대를 위한 인천공항철도 활성화 방안이 절실하다. 따라서, 본 고에서는 현재 KTX의 직결운행, 인천공항철도 운행열차의 고속열차(EMU 180 km/h급)대체를 통한 Speed UP을 통한 수요창출을 위한 시설계획 및 운영계획 등을 제언하여, 국가의 관문인 인천공항을 이용하는 승객들에게 신속하고 편리한 운행수단을 제공하고, 아울러 수요창출을 통한 국가보조금의 축소에도 기여할 것으로 기대된다.

There should be a need for measures to build up environmentally friendly transport system with new town for residence being built near metropolitan area. In order to promote the development of station influence area, convenience for public transport users and LRT(Light Rail Transit) construction, request for the speed improvement of urban transit is on the rise for easy access to the metropolitan area. This paper delves into the efficient operation of high speed train suitable for passenger demand estimates, and seeks to ensure integrated transportation system with subway Line 9 following the construction of Gimpo urban railway.

Management innovation as a strategic alternative to create competitive advantages in the global market, is being actively progressed by conglomerates such as Samsung, LG and Toyoda as they cut a brilliant figure in the 21 century by using various innovation methods. However, the domestic railway sectors, in particular urban railway depots have neglected management innovation as they undertake Operation and Management in non-competitive settings of a corporate enterprise. This paper analyzes the critical success factors that have switched the most obsolete depots to a benchmark model for domestic railway depots based on the remodeling businesses undertaken in Gunja rolling stock maintenance office, Korea's first urban railway depot, along with 5S 6sigma program.

최근 도심지의 지하철 노선들은 과거에 지어진 지하철 노선들에 비하여 대심도 터널이 증대하고 있다. 신금호 역사(5호선, 깊이 : 46m)는 수도권에 있는 지하철 역사 중에서 3번째로 깊은 역사로서 대심도 역사의 모델로 선정되었으며, 신금호 전체 역사에 대한 화재시뮬레이션을 시도하였다. 신금호 역사는 3개의 출입구, 지하 1층 대합실, 지하 2층 대합실, 지하 2층에서 8층으로의 연결통로, 지하 8층 승강장으로 구성되어 있다. 본 연구에서는 지하 8층 승강장에서 지상 출입구 까지 전체 역사를 대상으로 연기거동을 해석하기 위하여 9,000,000개의 격자를 생성하였으며, 계산 효율을 증대시키기 위하여 19개의 블록으로 나누어서 처리하였다. 화재해석은 화재에 특화된 CFD 코드인 FDS를 사용하였으며 난류해석 기법은 LES가 사용되었다. MPI의 병렬처리기법을 이용하여 19개의 블록을 각각의 CPU에서 분산처리 하였다. 본 전산수치해석에 사용된 CPU 자원은 Intel 3.0 GHz Dual CPU 10개 (Core 20개)이다.

본연구는 철도차량의 객실 전기 난방기를 절전형 온수겸용 전기난방기로 대체 하게되면 겨울철 객차내의 세면장 온수를 별도로 데울 필요 없이 온수를 사용 할수 있으며 승객의 서비스향상에 기할 수 있다.에너지 고 효율화로 인한 에너지 절감 그리고 연료비용의 절감으로 인한 경영개선을 이룰수 있으며 또한 환경 오염을 방지할 수 있으므로 철도차량의 객실내 난방을 위하여 앞으로 활용도가 높을것으로 전망되며 점차 확대될 것으로 예상된다.

To predict and analyze the rolling stock's fire growth is considered not only important factor in estimating hazard analysis of rolling stock, but also a primary factor in aspect of a rail load facility. Because it's could be regarded as a ignition source in risk assesment for the facility i.e. tunnel and station. However, currently, standardized method to predict and analyze the fire growth has not been completed yet. it is due to the fact that fire growth is not only depended on thermal property of interior materials, but also is affected dominantly by various factors such as ignition source (characterized by location, duration, and intensity), train running condition and in/exterior ventilation condition. Especially, ventilation condition is one of the most effective factor to affect fire growth in compartment space as noticed by under-ventilation fire condition. In this study, the effect of each ventilation condition on fire growth and load were examined through the numerical method through FDS (Fire Dynamics Simulator).

This paper describes on aerodynamic characteristics of pantograph system for Next generation high speed train(HEMU-400). The pantograph which supports electric power is located on the roof. Because of this, it generate high drag, severe acoustic noise and vibration which induced unstable flow due to complex configuration. Therefore, the design of high efficient pantograph needs to increase operational speed. In this research, wind tunnel tests were performed to design a high efficient pantograph system using 1/4 scaled model which were KTX-II pantograph, single arm pantograph and periscope type pantograph with square cylinder shape panhead and optimized shape panhead. For real operational condition, flow directions were adapted by rotation of pantograph. From this results of wind tunnel, it is checked that the pantograph with optimized panhead and single arm type or periscope type has better aerodynamic performance. In addition, lift control device and spoiler in pantograph were tested to investigate the validity of application.

최근 한국에서는 세계적인 녹색기술을 맞아 향후 차세대 교통 시스템으로서 튜브 트레인 시스템의 본격적인 연구가 진행되고 있다. 한국 철도기술연구원(KRRI, Korea Railroad Research Institute)에서 튜브 트레인 시스템의 건설을 위한 목적으로 연구가 진행되고 있다. 본 논문에서는 기초연구의 일환으로 축대칭하며 긴 형상의 수송체가 가지는 다양한 튜브(터널) 내부의 압력, 막힘비율, 운행속도를 파라미터로 선정하여 전산해석을 수행하였다. 세부사항으로는 동일 형상의 운송체가 동일 운행속도를 가지고 일반적 압력의 개활지(오픈 시스템, 개활지 운행)를 운행할 때와, 다양한 환경(튜브 내 압력, 막힘비율, 운행속도)의 튜브 내부를 운행할 때에 대하여 튜브 트레인의 공력특성 연구를 수행하였다. 이를 통하여 다양한 운행속도-막힘비율 별로 개활지와 동일 에너지 효율 나오는 튜브 내 압력(P-D 관계)을 계산하였고, 막힘비율 증가에 따른 튜브 내 감압 정도(P-${\beta}$ 관계), 다양한 막힘비율-튜브 내 압력 별로 운행속도에 따른 전체 항력 양상(D-V 관계)을 보여 주었다. 그리고 개활지 운행시와 튜브 내부 운행시의 에너지 효율(주행저항)을 비교하였고, 튜브 내부 운행 시 트레인이 갖는 효율과 관계되는 충격파 발생의 임계속도(critical V-B 관계) 및 한계속도(V-P 관계)를 얻을 수 있었다. 이러한 연구의 결과는 튜브 시스템 설계 및 건설에 꼭 필요한 것이며 가이드라인을 제시했다.

모노레일은 전철의 최첨단 시스템을 적용하여 버스 규모의 크기로 운용할 수 있는 중소형 교통수단으로서 각 장치들에 대한 소형, 경량화가 무엇보다 중요하다. 세계 최초로 도입한 중앙 안내 방식의 도심관광형 월미모노레일 또한 소형, 경량화 된 장치들로 구성되어있으며, 특히 열이 많이 발생하는 추진 시스템(인버터, 모터)을 소형, 경량화 하기 위해 집중적인 연구와 시험이 이루어졌다. 본 연구에서는 고효율의 추진 시스템을 소형, 경량화 할 수 있는 수냉식 냉각 구조 및 방법에 관한 해법연구와 함께 에너지 절감에 효과적인 제어방식을 제시하였다.

Management of indoor air quality of underground subway station is an important issue since the limited natural ventilation, limited sunshine incoming, and highly moistured atmosphere. The improvement in IAQ of platform is expected because most stations were installed with platform screen door currently, however, the poor air quality in tunnel might be affecting subway cabin indoor. In this study, we developed the air quality assessment model based on computational fluid dynamics. The geometry of air ventilation unit, seat, LCD monitors, and passengers were modeled using commercial software (Design Modeler) and fluid pattern and pollutants trajectories were analyzed by using CFX. We predicted the thermal comfort by predicted mean vote (PMV), distribution of CO2 and PM10 concentration. It is expected that this model can be used for the performance test of air cleaners which are under development.

The surface roughness of wheels and rails are known to be major contributory factors in wheel-rail rolling noise. Generally, the rail roughness was greater than the wheel roughness. Generally, rolling noise sizes and noise level in compliance with wheel/rail roughness almost are reported with the fact that is similar. Rolling noise important factors rightly being in compliance with roughness of contact point regions of the wheel/the rail, presented from the present paper.

Recently, Interior Permanent Magnet Machine(IPM) is widely used for traction motor in the high speed train. Higher efficiency and power density are the superb performance of IPM. Due to the high power density, however, it has lots of heat source which are originated from copper losses and core losses. These heat source can cause the permanent demagnetization in magnet and the loss of torque and power. To prevent the undesirable loss in the traction motor, the accurate loss calculation and the thermal analysis should be preceded. Especially, the end-winding area and permanent magnet area should be examined correctly. In this paper, the electromagnetic fields were examined by finite element method to analyze the electromagnetic properties of IPM and thermal analysis are carried out with pre-calculated losses. To validate the analysis result, the experiment set with forced air cooling system is manufactured.

Railway has recently played an important role in preventing global warming caused by green house gases and furthering a low carbon green growth, The various railway research centers have conducted facilitated studies on saving energy. In particular, urban railway has emerged as the best means of public transportation in terms of punctuality, safety and environmentally friendliness. There are various ways to save energy in terms of operation of urban railway system, and they can be generally divided into hardware aspects that pertain to structure of vehicles and development of control system and software aspects that pertain to effective operation of trains based on operation patterns and diagram control. In this paper, we investigated drive assistance system for railway energy efficiency. The railway operation patterns and train diagram management programs were researched.

The wide gangway train have different indoor without the gate door to the most trains. in gangway train of structure without the section, heavy casualties are possible to occur by quite smoke movement in fire. in this study, fire behavior and smoke movement were analyzed as the locations and kinds of fire source by using FDS simulation tool. the model train size of $9m{\times}2.4m{\times}2.4m$ was serially constructed of six cars.

Advanced Railway countries are developing technologies of production and management for low-carbon and green growth of their railway industry to hold a dominant position under post-Tokyo protocol regime through integrated approach which uses environmental quantitative analysis of train life cycle by using LCA(Life Cycle Assessment). On the contrary, Korea railroad industry attempts to make an environmental improvement only for using regenerative energy and improvement in operating energy consumption through adapting reduction weight of material technology and etc. without systematic environmental analysis approaches such as comparing and analyzing energy consumption as well as GHG emission in each life cycle stages of train. Therefore, In this paper, low-carbon management and comprehensive environmental improvement for sustainable development of Korea railway industry through analyzing the result of life cycle analysis in abroad are suggested.

IP 카메라란 영상을 네트워크를 통하여 전송하는 카메라로 웹 서버, 네트워크 인터페이스 장치 및 CCD(Charge Coupled Device) 모듈을 모두 내장하고 있어 영상을 네트워크를 통하여 실시간으로 전송이 가능하며 네트워크가 구축된 곳 어디서든 카메라의 IP 또는 웹 주소를 통해서 24시간 현장의 영상을 모니터링하고 기록한다. 현재 IP 카메라는 기술의 발전과 함께 날로 진화하여 기존의 아날로그 카메라시장을 점차 대체해가고 있으며, 아직은 초기 단계지만 우수한 확장성과 아날로그 카메라의 노이즈 문제를 극복하기 위해 철도차량에서도 점차 그 영역을 넓혀갈 것으로 기대된다. 하지만 IP 카메라의 상용화를 위해서는 여러 해결되지 않은 문제점들이 내제되어 있어 본 논문에서는 철도차량의 IP 카메라 시스템 구성에 대해 알아보고 철도차량용 IP 카메라 시스템의 개발 및 설계에 도움이 되고자 한다.

2DOF is applied to induction moor in order to supply these weak points of PI torque control method in this paper. and The proposed method utilize the combination of the voltage model based on stator equivalent model and the current model based on rotor equivalent model, which enables stable estimation of rotor flux. To prove the propriety of this paper, the various simulations carried out adequacy and stability using Matlab, and at the same time real system is made, so it is proved. As the results of embodying the system, the robust system is realized.

전동차가 주행중에 브레이크 페달의 작동으로 주행모터의 양단에 발전된 전류는 전기에너지 특성상 바로 소비되지 않으면 제동력이 발생하지 않는 현상(회생 실효)가 발생하기 때문에 주변에 역행차량이 없거나 가선 전압이 안정되지 않는 경우 안정된 제동성능을 확보할 목적으로 발전제동을 병설한 차량이 존재하고 있다. 그래서 입력된 에너지의 55%를 전동차에서 소비하고 하구배 구간이나 회생 제동시 45%의 입력에너지 사용되며 그중25%는 가선을 통해 다른차 의 역행을 사용되므로 기존의 시스템을 크게 벗어나지 않고 회생 수단,회생 실효를 줄이기 위해서는 변전소의 배출전압저하(5%)정도 하여 회생시 지나친 가선 전압 상승를 완화 시킬 수 있다. 실제로 1호선 직류구간에 혼잡시간때 한구간에 상선기준으로 3대의 전동차가 운행되어 1500V의 전압측정과 비혼잡시간에는 1대~2대의 전동차정도 운행으로 1700~1800V 측정되므로 5%정도 조정은 운행에 지장을 초래하지 않을것으로 사료된다. 적정전압 측정 데이터을 통한 탄력적인 배출전압 조정을 통해 지하철 또한 에너지 소비효율을 위한 연구가 필요하다고 본다.

MCU(Micro Controller Unit) used for the automobiles has been required for improving of the safety and high reliability. Also, the necessity of high performance MCU equipped with high fuel-efficiency has been risen according to increased requests of high fuel-efficiency and improving the occupants safety with the development of intelligent vehicles and future vehicles. The MPC5554 32-bit embedded controller, made by Freescale Semiconductor, specialized in the part of the power train provides the high reliability, fast interrupt process and real-time control. In This paper, the investigation on IPMSM using MPC5554 has been performed. Also SVPWM(Space Vector Pulse Width Modulation) is implemented to the servo system.

In this paper, the static overmodulation is proposed for the 2-phase full bridge inverter. The overmodulation strategy increases a fundamental output voltage and improves a voltage utilization up to the maximum in the overmodulation range. The linear modulation range and static overmodulation range are defined in the 2-phase full bridge inverter. The overmodulation strategies which increase a voltage utilization until the 4-step mode by linearization of the output voltage in overmodulation range are proposed. To maintain a linearity of the relation between a reference voltage and a fundamental output voltage, this paper suggests a compensation voltage, whose magnitude or phase is modified to the proposed control scheme. Simulation and experimentation results demonstrate the effectiveness of the proposed algorithms.

본 원고는 직류전원에서 사용하는 직류용 소형전동기(motor)로 전력용 반도체 제어소자인 Power Transistor, MOSFET를 이용하여 전동기(motor) 구동의 드라이브 회로를 구성하고 전동기 동작원리와 정 역회전의 회전방향 제어에 대하여 다루고자 한다. 그리고, 제동운전 및 펄스폭 변조(PWM)에 의해 가변되는 회전속도제어 방법에 대해 기술하여 직류용 전동기(motor)의 기본적인 원리를 이해함과 더불어 마이크로프로세서를 이용한 다양한 전동기(motor) 제어방법을 제시하였다.

Display Unit(DU) of TCMS is very useful device display many data for operation and maintenance graphically. At This Time, rolling stock is reducing the wiring and size of desk for cutting down on their cost and making light weight. Dual Du(Display Unit) of TCMS could make the desk of cab simply by integrating cab's switches and gauges. Dual DU is not only can reduce the wiring and simplify desk of cab but also can making system of TCMS reliable by including backup function each other. For this reason. In this paper, advantages, application and example analysis of Dual DU of TCMS for rolling stock are described through the ongoing projects.

A bimodal low-floor tram can provide the punctuality of trains and the flexibility of bus together to the passengers. Its propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. This paper presents a development of the measurement equipment for fine-tuning of a series hybrid propulsion system of bimodal low-floor tram. Its configuration schemes are described and certified using the measurement data of bimodal low-floor tram.

Ballasted track is under the circumstance of repetition of deterioration and recovery. Track deterioration is presented as track irregularity or settlement, and dynamic force subjected to track is one of major cause of the deterioration. The dynamic force is determined from the dynamic interaction between track and vehicle. Rail-pad stiffness is one of the factor affects track dynamic property. In this study, the relationship between rail-pad stiffness and track settlement was investigated. Dynamic forces according to various rail-pad stiffness was obtained from the dynamic vehicle-track interaction analysis using DARTS-NL. Track settlement was calculated by substitution the dynamic forces into various formulas for track settlement. From the result of analysis, it was known that the track settlement is increased about 6% when the rail-pad stiffness rise about twice. And this result leads that there is only a little relationship between rail-pad stiffness and track settlement.

It has been proved that precast slab track has advantage of rapid construction speed and good quality compared to in-situ concrete slab track. A korean precast slab track, which is named as a K-PST, was developed and had been installed on the embankment and explored on the air. The developed track system consists of precast track panel and underpouring layer which is made of cement-asphalt mortar. Consequently, poor filling of underpouring layer directly could affect on the long-term performance of the track system. As a preliminary study, the effect of the poor infilling of the underpouring in precasst slab track system on structural behavior was investigated through FEM analysis.

Present maintenance of a high speed railway is after the fack maintenance that executes a task when measured value goes over threshold value except some planned maintenance. It is difficult from efficient management of maintenance human resource and equipment commitment because it is difficult to predict quantity of maintenance targets. Corrective maintenance is pushed back on the repair priority of other target to need repair and it is exceeded repair cost potentially. For safety and dependable track management because track deterioration prediction is linked directly with track's life and safety of train service, it is very important that track management be based on preventive maintenance. In this study, we propose statistics model of track quality to use track inspection data and forecast model for track deterioration prediction.

Recently the construction of railway sections passing the central area of cities and stations under railway lines are increasing, and then it is urgently required to take the countermeasures against the railway vibration and the second-phase noise radiated from it. The most efficient countermeasure, out of technologies developed up to now, is the floating slab track which is the track system isolated from the sub-structure by springs. In other countries, the source technologies for anti-vibration design and vibration isolator - one of key components - have been developed and many installation experiences have been accumulated. However, in Korea, since the system design technology and technologies for key components are not yet developed, the foreign system are being introduced without any adjustment, and the key component, vibration isolator, depends on imports. In this study, floating slab was divided into three spans, $k_{dynamic}$ use by examining reactions and member forces was to ensure safety.

300km/h의 고속으로 운행중인 선로구간에 중간역 설치에 따라 분기기 부설시 기존선로의 레일응력 해소방안이 필요하며 또한 속도제한을 높게 하고 기간을 단축시킬 수 있는 방안을 통해 열차 이용객의 불편을 최소화하여야 한다. 경부고속철도 중간역사 오송, 김천구미역 신설에 따른 분기기 설치는 짧은 야간 차단작업시간(1일 6시간)에 여러 부분으로 나누어 시행하여야 하고 곧바로 고속열차를 운행시켜야 하는 매우 어려운 조건으로서 국내에서는 처음이고 세계적으로도 매우 드문 사례이다. 본 논문에서는 작업조건, 장비, 안전조치 등에 관한 사항을 제시하였다.

In line with current speed-up of railroad, a slab track has been increasingly adopted in a bid to secure the safety of track structure as well as to reduce the maintenance cost, and furthermore, the need for commercialization of domestically-developed swing-nose crossing turnout on slab track has been on the rise. For commercialization of swing-nose crossing turnout on slab which was developed in Korea, a technical and systematic performance evaluation system, considering local environment, shall be established and then the performance evaluation shall be accordingly implemented. This paper was intended to summarize the performance evaluation system, referring to the data available at home and abroad and the results of performance evaluation for domestically-developed swing-nose crossing turnout on slab track carried out to date based on that system. A performance evaluation system comprises the technical requirement appropriateness evaluation(component performance evaluation and design verification), laboratory test and on-site test. For domestically-developed swing-nose crossing turnout on slab track, appropriateness evaluation and laboratory test have been completed and the on-site test of those installed on the 2nd phase of Kyung-Bu HSR is underway now.

Recently, with the beginning of the commercial operation of high-speed railway, there have been a number of changes in track structure fields. Also, it is expected that the development and introduction of new technology will be increased afterwards. However, it accompanies a lot of risk to install new track structures of which performance and safety are not verified on permanent ways with high traffic density. Therefore, to minimize the risk and enhance the adoption of new technology, it is required to develop a systemic verification system for track structure. To do this, in this paper, main contents of a draft of guidelines for track structure verification, and main issues in debate such as criteria and method for verification, test conditions and test periods are discussed. Also, a process to choose a most appropriate one for a specific project out of proven track structures by the above verification system, the selection process by the technical investigation committee and the VE process to analyze the economical and maintenance aspects based on LCC concept in Korea Rail Network Authority is introduced.

We should manage the target locations according to the deterioration degree of the ballast for the rational and economical ballast cleaning. For this, it's required to define the logics calculating the crushing rates and suggest the threshold values for the ballast cleaning. This paper introduce the system modules that estimate the ballast's deterioration degree refers to the results of the previous study("A Study on the Crushing Characteristic of the Ballast Gravel at High-Speed Railroad", Journal of the Korean Society for Railway, Vol.11, No.4, pp.384~389), enroll the target locations where the ballast cleaning is required.

The buckling behavior of CWR tracks is affected by the various parameters such as stiffness and geometry of track panel, ballast resistance, rail temperature, initial imperfection, and wheel load. Until now, CWR tracks were managed by the dichotomous logic (deterministic approach) despite these influence factors are having the nature of random variables. So, the design method and existing management process to prevent the track buckling can be very non-economic since the value of these influence factors to calculate the track buckling strength are selected by considering the worst track condition. In this study, buckling probability evaluation process is proposed which is based on the reliability index, AFOSM method, and limit state equation.

Track geometry changes by traffic loads. The bigger the changes are, the worse the riding comfort and running stability of train. This is so-called track irregularity and is the most important quality parameters of ballasted track. To objectively assess track irregularity, track geometry should be able to be measured. Practically, railway companies in Korea use normal distribution as probability distribution of track irregularity. But some countries use non-normal distribution according to their own track recording system. In this report, reviewed probability distribution of Kyung-Bu high-speed line and tested normality.

장대레일 교체주기는 자갈궤도 레일두부 표면요철과 레일 휨피로의 상관관계 분석을 통해 산정되었다. 본 연구에서는 국내 도시철도(서울메트로) 콘크리트궤도에서 레일두부 표면요철량에 따른 레일 휨응력을 측정하였다. 또한, 콘크리트궤도 레일두부 표면요철, 속도와 레일 휨응력의 상관관계를 분석하였다. 결론적으로, 중회귀분석을 통해 운행속도(U), 표면요철(v, w)에 따른 레일 휨응력(Y) 예측식을 도출하였다. 본 연구결과는 콘크리트궤도 장대레일 교체주기를 수립하기 위한 기초데이터로 활용이 가능할 것이다.

The surroundings around subway are becoming more lively for project of CBD (an redevelopment project), however vibrations which are made through passing train cold spread buildings around. The structure-borne noise could be generated at the same time that makes people including developers and th citizens have negative viewpoint on railway. Especially, Seoul Metro 1-4 lines ar built alongside the road nearby houses and business district. That could make plenty of public resentments because of the structure-borne noise. Seoul Metro should make active alternative plans for their future urban environment projects which will be conducted. The case was Railway Facility which were conducted to minimize structure-borne noise from sharp curved track section (4 line, Sinyongsan~Ichon, R 250m). The section is adjacent to house district as near as 6.6m related with pusing international city project, the 4th urban environment project around international building, near Yongsan station. The interval of sleepers would be downsized in half with breaking existing case, and pad stiffness is reduced 4 ton from 10 ton. That makes structure-borne noise minimized because of vibrations are lowered about 19.1-23.0db. The structure above has remained for a year and a half from October, 2008, and had not any trouble to perform excellence with 80million ton rail accumulated tonnage.

This paper shows an algorithm for identifying track irregularities using wavelet transfer function along the railway. An equivalent SISO wavelet transfer function is defined using continuous wavelet transform by the measured track geometry and acceleration at a bogie of a train. The estimated track geometry is made by inverse continuous wavelet transform from the regressed signals of measured acceleration signal and the pre-defined wavelet transfer function. The estimated rail irregularity geometry is evaluated by the coherence function and comparison of FRF(Frequency Response Function). As a result of evaluated outcome, This algorithm is regarded as appropriate for estimation of rail irregularity.

This paper's purpose is to support the strategies of the Small and Medium Railroad industries requiring certifications and products inspections. This study's objects are Small and Medium Railroad enterprises pursuing the making products, development and serving services. Research's questions consist of 14 principal questions and some incidental questions which are made for finding out what Small and Medium Railroad enterprises need. This research's result will be used for KRRI Railroad Testing & Certification Center's study. This study will include market research, deciding strategies and setting a range of supporting level for Small and Medium Railroad enterprises who request a test and certification service. After due consideration based on surveys, this paper makes clear what enterprises need actually, also indicates the strategic ways to support by technology transfer and test assistance for Small and Medium Railroad enterprises.

On last year's KSR conference, the general of systems engineering technology was introduced on the focus that the SEMP(Systems Engineering Management Plan) being applied for a national project of 'Urban Maglev Program'. Since this SEMP covers very wide work scopes of 'plan, application, control of the program', 'design, analysis, test & evaluation of the system', and 'special engineering activities', it is very important that the tasks and responsibilities of all participants of the project, involving the tasks to collaborate between them, are clearly defined and described. By the point, the updating of SEMP should be done continuously. In this paper, the updating points and typically the management plan of TPM (Technical Performance Measurement), which is more concretely defined, will be explained.

When the Trans-Korea Railway (Gyeong-eui Line and Dong-hae Line) initiative is completed, Korea will become one of the major trading partners of Russia through the Trans-Siberian Railway (TSR). This will be an opportunity for Korea to take-off to a 'Traffic and Logistics Center in 21st Century. The opening of the Eurasia Continental Railway will provideKorea with the opportunity to develop into the logistics center of Asia-Pacific area and the benefit of reduced cost of unification by improving the correlation between South and North Korea through the cooperation in railway business. However, there exist the uncertainties for its demand and innovative reduction in transportation time and cost, due to the practical problems including economic efficiency and transportation technology. In this paper, the practical problems of TSR are discussed in the economic and social perspectives to develop the methodology for the Korea-Russia railway cooperation and for the improvement of the competitive power of TSR.

2004년 4월에 경부고속철도 1단계 구간이 개통되어 국민들에게 새로운 고속열차 서비스를 제공하여 고객 만족도 향상 및 수익증대에 기여하고 있다. 이와 더불어 오는 2010년 말에 대구~부산간 경부고속철도 2단계 구간이 개통되면 서울~부산간 이동시간이 단축되고 신설되는 경주, 울산지역에도 고속철도 서비스를 제공하게 된다. 이에 본 연구에서는 경부고속철도 2단계 개통시 신설되는 경주, 울산역에 대하여 시내와의 연계 서비스 운영방안에 대하여 살펴보고 연계 수요의 분석을 통한 연계 서비스 전후 효과를 분석하고 아울러 경제적 효과에 대한 분석을 시행하였다. 이를 통하여 신설되는 경주, 울산역에 대한 효과적인 연계 서비스 방안을 통한 고객 만족도 향상 및 철도의 수익 증대 방안에도 기여할 것으로 기대된다.

2005년 교토의정서가 발효되면서 세계는 에너지절감 및 저탄소 수단위주의 대중 교통정책이 펼쳐지고 있다. 우리나라는 현재 세계 8위의 탄소배출국이며 2013년부터는 온실가스 감축의무대상국에 포함될 예정이다. 본 논문에서는 국가교통시설의 투자전략을 고효율 및 저탄소 정책을 달성할 수 있도록 녹색교통수단인 철도를 중심으로 대중교통체계를 개편하기 위해 다양한 추진전략을 제시하였으며 추진전략은 크게 속도, 접근성, 도시개발, 유비쿼터스 측면에서 고려하였다. 본 연구에서 제시한 4가지 주요전략은 1시간철도, Seamless 30, Rail Urbanism, U-Rail 로 정의 하였으며 1시간철도는 1시간대 연결 가능한 고속철도망 구축, Seamless 30은 주요 거점역까지 30분 이내 접근, Rail Urbanism은 철도기반의 도시계획 실현, U-Rail은 Ubiquitous 기반의 철도서비스 제공이라는 목표를 설정하였다. 각 추진전략별 세부추진과제를 수립하여 교통분야의 전문가를 중심으로 AHP 분석을 실시하였으며 각 세부추진과제별 추진 우선순위를 도출하여 단기, 중기, 장기로 구분하여 Action Plan을 제시하였다.

This paper explored an effective scheduling method for the Seoul-Busan High Speed Rail. It is important to decide train frequency influencing on scheduling method. Main factors to decide train frequency are location of station, social economic index, land use of station area and travel demand. In this paper, we focused on travel demand which is critical factor to decide train frequency. And we studied on standardized scheduling method. Simulation method is used to analyze the performance of explored method.

After analyzing network of the region of western sea, which is the center of Circle Yellow-Sea economic region, and Circle Bo-Hai and the delta of a long river economic region, which are belong to three major economic region of China, as an efficient strategy, rail & sea multi-transport system of Korea-China joint SOC strategy is suggested. Rail & Sea multi-transport system, which is the links of railroads and shipping transport, can be subdivided into train-ferry, which is the transport of loaded trains into a vessel, and transshipment, which is transshipment of containers from railroads to vessels. And, the way of railroads transport through a tunnel under the sea is also suggested.

The Railroad that is representative transportation of Low Coal and Green Growth is industry that meet and serve unspecificness many customer unexpensive price as industry doing against as social overhead capital. Present our country railroad achievement is real condition that is not coming out in eternal in the red management. Accordingly, In this research, analyze success factor of management black-ink balance of railroad advanced nation such as Japan, France and Compare with our country and grasps problem of present city railroad fare system. Finally, alleviate fare burden of customer through diversification of fare system service such as establishing point uniformly for railroad fare that introduce first in Japan JR Kyushu railroad and propose the improvement of management of railway operation organization through demand enlargement.

G20 summit is expected to be held in seoul this coming Nov. 2010 which is a typical case of international meeting in MICE industries have been rising in the world and can be considered as a new marketing paradigm. since IMF crisis in 1997 in korea via financial leeman turmoil in the wall street caused ruins of the middle class as financial resources of korea. it's like saying that we need to look for another practical marketing way not mass marketing any more to get through this comprehensive financial crisis. in this study, we are going to find out new marketing way using MICE industires.

Station-area development need transportation system and efficiency of public transit operation. but it had a great difficulty in developing by lack of profitability station-area because the excessive public contributions, and increase of land usage, a lot of tallege. Recently station-area development accelerated by the new law has been overridden and more efficient transport system configuration stations, possible of urban regeneration. The purpose of this study is to successful promotion of the urban Planning by Unit-Station-area development, the optimal method of financing, changeable of zoning to the development of high density.

This paper investigates the productivity growth in Korean railway lines. The productivity growth is calculated by a process of measuring of pure efficiency change index(PECI), scale efficiency change index(SECI), and technical change index(TCI), using Data envelopment analysis (DEA) method. The data cover the period 1990~2007; 1990~2003 are the pre-structural reform years and the post-structural reform years are 2005~2007. The framework for the analysis is Malmquist Productivity Index (MPI) of the to investigate the impacts of structural reform on productivity growth, respectively. The inputs considered are the length of operating line, the number of staff, the number of coach and wagon, and the outputs are the trains movement of passenger and freight, and the traffic of passenger and freight.

The SOC project such as road and railway performs a preliminary feasibility study according to the priority of the individual projects after establishing the master plans. For a preliminary feasibility study, feasibility evaluation should be performed according to the transport demand estimation and economic analysis. The feasibility of individual project will be performed by focussing on the results of analyzing economic feasibility. In case that analysis of the traffic demand and the economic feasibility every phase is performed, a lot of time and expense will be required in the course of promoting projects. So this study could give help to determine the priority of the project by intuitive method only in the phase to establish the master plan and a preliminary feasibility study.

For the remarkable enhancement of high-speed rail passenger services, a system which provides various multimedia contents and Internet search functions was designed. The system gets inputs from a passenger and displays various multimedia contents on the touch sensitive LCD panel attached on a passenger seat. This kind of service is new in Korea and not easy to find in other countries, either. In this paper, we presented a design of a system which provides not only one-way broadcasting services but also searching capability of various information interactively. Informations to be provided are train schedule, transfer information, tour information, E-books, movies, music, ets. Successful completion of the system development in the following years is expected to strengthen international competitiveness of Korean railway industry.

Currently a KTX train of 20-car formation is 388m long and carries 931 passengers including one captain and three crews which is quite a few to cover the lengthy service area and many customers. On the other hand, if a passenger wants to talk to an attendant, he has to wait for an attendant passing by his/her seat or walk to an intercom which is placed at every other car. Any of these choices is inconvenient. So, in this paper, we presented a system design for developing an audio/visual communication system for a passenger and an attendant. The system was analyzed and designed according to the Object-Oriented methodology with UML (Unified Modeling Language). Based on a problem statement, a Use-case Diagram, Sequence Diagrams, Class Diagram, State Charts, collaboration Diagram were generated. The design will be used in system implementation to a HEMU-400X test train and to be tested.

Recent increases in the road and rail infrastructure, but the urban traffic problems such as accidents, congestion are increasing. The reason is that the high cost and lack of accessibility of railway transportation, the low quality of road services, and efficient transport links, etc.. The developments of a variety of policy and technical means are being performed to solve these problems. Among them, the Bimodal Tram which is combined low-cost of bus and high service quality of railway transportation is attracting attention. In this paper, the development status of technology and efficient utilization of operational and infrastructure elements for the operational efficiency, safety and passenger comfort of Bimodal Tram is studied.

Up to now, High speed train was widely used in France, Germany and Japan. In korea, High speed train was introduced from France train model and operation was made in year 2004. With this high speed operation Know-How, HSR-350 train was developed with our own technology. And now KTX-II which was made by our own technology are running in commercial line. High speed rolling stock system acceleration technology is train propulsion system and this is composed with traction motor, Power transfer system and auxiliary power system. This paper, introduced the performance of the traction propulsion system and other equipment that has been installed at the KTX-II will be secured.

Up until now, power centralized trains have been produced due to the maintenance convenience and comfortableness, but there are some problems, such as limitation of viscosity and maintenance difficulty of railroad due to recently increasing axle mass. In order to improve the problems, power decentralized trains have been developed to improve traction power. In the case of using electrical braking system, it is possible to improve braking friction power. Induction motors have been developed for power decentralized high speed train because of less structural defection, and low maintenance and production cost. However, induction motors have limitations, such as assuring enough power capacity and efficiency with reduced size. PMSM (Permanent magnet synchronous motor) have been newly developed to improve shortcomings of induction motors. The PMSM can be produced small and light weighted. Also if the PMSM and induction motors have the same size and power capacity, the PMSM have better power efficiency. In this pater, the prototype and modified type of PMSM for "High-speed Electric Multiple Unit-400km/h eXperimmen" will be introduced.

The safety step has been developed to ensure the passengers' safety including the disabled and the weak by eliminating gap between vehicle and platform. The type of safety step is divided according to the position that the safety step is installed. The type of safety step attached platform is the rubber type that is previously attached to a platform. The installed rubber can reduces the gap between vehicle and platform by a fixed distance. If the safety step is installed on the vehicle, it is possible to respond to the various platform typed such as straight or curved form. It is also flexible to the height of riding depends on number of passenger and platform conditions and does not require crew's additional operation. We have been developed vehicle attached safety step for advanced electric multiple unit. We hope to increase the use of safety step for the disabled and the weak to expand the convenience use of railway transportation system.

The equivalent circuits intended to analyze the characteristics of IPT systems can be shown in structures similar to those of existing transformers. IPT systems are composed of combinations of the primary and secondary coils based on magnetic coupling, and the performances are determined by the lengths or the degrees of magnetic coupling of current collecting conductors(secondary) and feeding rails (primary) and system performances become the maximum when they are coupled under the optimum condition. To maximize the output currents of the secondary side, the shapes of iron cores and the structures of coils etc should be considered. To this end, three types of IPT system simulation models were selected and they were analyzed using an electromagnetic field analyzing program. To compare the types with each other, the sizes of the IPT systems and the primary side voltages etc were made to be the same. The electromagnetic fields were analyzed while changing the thicknesses of the cores and the lengths of the air gap etc and the results were analyzed in order to derive the optimum specifications.

2001년 KORAIL에 도입된 8100대 신형 전기기관차는 독일 SIEMENS사의 BR152 모델을 국내 설정에 맞도록 들어와 부분 수정 및 보완 통하여, 2003년 8200대 신형 전기기관차를 탄생하도록 한 PROTOTYPE 이다. 8100대 신형전기기관차와 8200대 신형 전기기관차는 유사하지만, 일부 수정되고 개선된 부분 중의 하나가 객차 전원 공급(이하'HEP) 장치이다. 이에 본 논문은 8200대 신형 전기기관차의 HEP 장치에서 무궁화호 객차로 공급되는 HEP 전원의 고조파 왜율에 대하여 원제작사의 조합시험 결과를 바탕으로 현재 운용중인 KORAIL 8200대 신형 전기기관차의 HEP 전원의 고조파 왜율을 실측하여 상호 비교하고, 전원 공급 장치의 고조파 왜율에 대한 국제규격 및 현황을 설명하고자 한다.

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch on condition. This project has a goal to develop the automatic changeover system using by noncontactless semiconductor device in neutral section of catenary system so that the train pass as notch-on condition. In this first year, we obtain as following results such as domestic and international systems applications and completion requirements, development and analysis of stability for automatic changeover system, design of static switching device on automatic changeover system in neutral section and drawing up interface design and specifications according to equipment.

This paper is described the analysis of time-varying low-frequency electric magnetic field emitted from electric rolling stocks fed by VVVF inverter, in reference to allowable magnitude for exposures to time-varying electromagnetic field issued by International Commission on Non-Ionizing Radiation Protection(ICNIRP). The level of the magnetic field strength was measured, in reference to the standard for occupational environments, which takes into account the public person's protection against the excessive emission of the low-frequency magnetic field, 5 Hz ~ 2 kHz.

This paper is about control algorithms that bi-direction DC-DC Converter using Super Capacitor and regenerative power from DC feeding system in train. In order to take advantage of regenerative energy efficient, charge and discharge level value of energy storage system serve as an important factor. Respect to output fluctuations of the substation and catenary voltage changing, we offers Charge-Discharge Auto Level Tuning Algorithms to improve system following of Energy Storage System.

The existing city which consists of the downtown in Korea has been built spontaneously, and it is in difficulties for the distribution problem and traffic congestion since undersupply of social facilities cannot afford to handle the increasing traffic demand. So the traffic facilities have been reinforced to increase the competitiveness of the city and solve the related problems. The need of a new transit system considering the transport capacity and environment-friendliness is emerging as revitalization of public transportation is needed for reduce of personal transportation. In case of local governments that the Self-Reliance Ratio of local finance is high, if they promote the business by tram transit low which period could be shorten, it can correspond the traffic policy and invigorate the introduction of the new traffic system.

In this study, vertical and horizontal accelerometers were installed at the both side of car body and tachometer was installed on the bogie, for the purpose of stability analysis of Korail Airport Express Train during driving. By applying the developed algorithm, the peak-to-peaks of horizontal and vertical acceleration which were matched with location by tachometer were found and compared with the threshold values. The threshold values per velocities which were presented in the "Metro Train Performance Criteria" were applied here. The validity of the developed algorithm was shown by comparing the site investigation and the measured values at frost heave locations.

2차원 카메라와 라인 레이저를 이용한 비접촉식 레일 마모도 측정 시스템은 레일의 정확한 마모도 측정을 위하여 레일에 조사된 레이저 영역을 왜곡 없이 획득하고 이를 레일 단면과 정확하게 일치시켜야 한다. 그러나 일반적인 비접촉식 레일 마모도 측정 시스템의 카메라는 레일의 측면에서 비스듬하게 레일을 촬영하여 사선방향(Oblique Viewpoint)의 원시영상을 획득하는 방식을 취하기 때문에 카메라 모델(Camera Model)과 투시 변환(Perspective Transform)을 이용하여 카메라로부터 획득한 원시영상이나 영상으로부터 추출된 레이저 영역의 좌표 데이터를 레일의 단면과 일치시키기 위한 영상 후처리 작업을 수행하게 된다. 이때 라인 레이저가 조사된 지점에서 획득한 레일 프로파일 데이터는 전체 측정 구간에 대하여 일정한 간격으로 측정된 불연속 데이터의 특성을 가지므로 측정된 각 레일 프로파일 데이터 사이의 영역에서는 정확한 레일의 마모도를 측정할 수 없는 한계를 가진다. 본 논문에서는 레일의 양방향에서 획득한 영상에 대하여 3차원 레일 프로파일 생성을 위한 변형된 카메라 모델과 투시 변환을 적용함으로서 레일 마모도의 측정 정밀도를 향상하기 위한 3차원 레일 프로파일 재구성 기법을 제안하고자 한다. 제안된 3차원 레일 프로파일 재구성 기법을 통하여 전체 측정 구간내에 포함된 레일 마모도 측정 데이터의 불연속성을 효과적으로 제거하여 연속적인 측정면(Measurement Surface)을 생성함으로서 측정하고자 하는 전체 레일에 대한 향상된 측정 정밀도를 제공하고자 한다.

2009년 3월 19일 도시철도차량의 내구연한 관련 법령이 개정되면서 도시철도차량이 최장 40년까지 사용 가능하게 되었다. 이는 차량제작 기술의 발전과 더불어 소재와 부품의 품질 향상으로 내구성이 우수해졌고 체계적인 관리와 노후 부품의 교체 등으로 도시철도 차량의 수명이 길어졌기 때문이라고 판단된다. 도시철도 차량의 안전은 승객의 안전과 직접적인 관계가 있으므로 안전성을 최우선적으로 고려하여야 하며 내구연한 연장을 위해서는 더욱 정밀한 안전 검정이 필요하다. 이에 내구연한이 도래한 전동차는 개정된 "도시철도차량의 정밀진단지침"에 따라 정밀진단을 실시하여야 한다. 본 연구는 내구연한 연장 관련 법령 개정 이후 최초로 정밀진단을 시행하고 있는 부산교통공사의 사례를 통해 정밀진단 시행기관과 도시철도 운영기관에 정밀진단에 대한 진단기법의 방향을 제시하고자 한다.

This paper proposes a new baseline-free TR-based SHM method in which the time-reversal (TR) property of the guided Lamb waves is utilized. The new TR-based SHM method has two distinct features when compared with the other existing SHM techniques: (1) The measurement- based backward TR process is replaced by the computation-based process (2) In place of the comparison method most commonly used for SHM, the TOF information of the damage signal extracted from the reconstructed signal is utilized for the damage diagnosis. For the damage diagnosis, the imaging method is adopted to efficiently detect damage by representing the damage as an image. The proposed TR-based SHM technique is then validated through the damage diagnosis experiment for an aluminum plate with a damage at different locations.

Reliable fast working maglev switch is one of the key technologies needed for the maglev system to be commercialized. Switch for the maglev system is large, heavy, complicated, expensive compared with that of the traditional wheel-on-rail system. This paper reports the development of a segmented maglev switch for urban transit maglev system under construction for the 6.1 km long double track maglev commercialization line in Inchon international airport in 2012. Test results along with details of the segmented maglev switch components are reported.

Mode II interlaminar fracture toughness was measured and fractured surfaces were observed of carbon/epoxy and glass/epoxy woven fabric composites for carbody structure. Woven fabric carbon/epoxy and glass/epoxy composites that made with prepreg and epoxy resin(RS1222) are used in carbody structure of Korean tilting train(TTX) and low floor bus. ENF(End Notched Flexure) specimens having $120mm{\times}20m{\times}5mm$ shape and 35mm initial crack were made with each composites and three point bending tests according to ASTM D790 were conducted for these specimens. Crack lengths in tests were recorded using optical microscope and digital camcorder. NL(Non Linear), 5% offset and Max. load points in load -displacement curves were checked and mode II interlaminar fracture toughness of these points were calculated and compared. Fractured surfaces of specimens were observed using optical microscope and mode II delamination behavior of each composites was discussed.

Last train of the vehicle for eht energy saving and improved performance PWM converters ares widely used. In the case of PWM converters by the zero detection system performance depends on whether it can be argued. Zero voltage detectio method of the hardware and software approach is to in this paper, the zero detection methods for hardware and software problems that have occured as a complemnetary technique was expained.

전동차 중정비 시 대치차 기어의 비파괴검사 방법으로는 일반적으로 침투비파괴검사를 적용하고 있다. 침투비파괴검사는 결함의 미세한 개구부 속으로 침투액을 투입하여 표면에 잔류하는 여분의 침투액을 제거하고 현상제를 도포하여 결함지시 모양을 관찰하여 탐상하는 방법이다. 그러나 이 방법은 기어를 조립상태에서 침투비파괴검사를 실시하므로 많은 문제점이 있다. 치면의 각도가 급경사를 이루므로 충분한 침투가 어렵고 과잉제거의 문제가 있다. 그에 비해 자분비파괴검사는 표면 하 결함은 물론 미세한 결함 검출에 용이하다. 시험결과 치면에 응력이 집중되어 내부결함 및 미세결함이 존재하는 경우 침투비파괴검사로 발견되지 않는 경우가 있으나 자분비파괴 검사로 미세한 결함까지 발견 할 수 있었다. 따라서 전동차 대치차 기어의 합리적인 비파괴검사법은 자분을 사용한 비파괴검사가 적합하다고 판단한다.

This paper describes the design process and the test of split wheel-mounted brake discs for high speed train with maximum speed 180km/h. A disc set composed 2 disc rings and individual rings are partitioned into 3 pieces with the same circumferential angle. Because partitioned disc rigs are exposed to severe centrifugal force as the vehicle speed increase, finite element analyses used in the design process to ensure mechanical safety. A prototype was verified its mechanical safety through the spin test up to 250km/h. 2 prototypes for 1 wheelset are mounted to Korean Tilting Train(TTX) and have been running over 15,000km

Maglev vehicles levitated and propelled by electromagnet as non-contact between vehicle and guide rail is environmentally friendly transport system which have many advantages like ride comfort and guide way construction costs. As a goal of commercial operation at Incheon International Airport in 2012, development of vehicle is underway and proto-vehicle is test running at KIMM. The maglev bogie system of proto-vehicle, like railway vehicle, has functions to support weight of vehicle, transfer force of brake and propulsion and improve ride comfort through insulation of vibration and improve curve negotiation capability. The main components of a bogie are two modules consisted of electromagnetic, frame and linear motor, two tie beams to connect two modules and steering system to improve curve negotiation capability. The purpose of this paper is to describe general specification, structure, manufacturing process, performance testing, ride comfort of proto-vehicle and bogie system.

Metallic sintered brake pads are often applied to Mid/High Speed Train due to its high strength and thermal characteristics. Because of its imbalance contact between discs and pads can greatly influence the life span, one sided wear, discs attack/crack and threat the safety of the train during operation. In this research, we analyzed pressure/temperature distribution between brake pads and disks. Analyzed data had been verified and modified to conduct further tests of Flexible brake pads with small/full-scale dynamo test. Flexible brake pads were installed to TTX train to conduct further tests to identify the differences between Rigid brake pads and Flexible brake pads. In result, Flexible brake pads showed outstanding disk thermal stability, one sided wear, noise and life of pad than rigid brake pad.

This paper proposed a new 2D multibody dynamic modeling technique to analyze overriding behavior taking place during train collision. This dynamic model is composed of nonlinear spring, damper and mass by considering the deformable characteristics of carbodies as well as energy absorbing structures and components. By solving this dynamic model of rollingstock, collision energy absorption capacity, acceleration of passenger sections, impact forces applied to interconnecting devices, and overriding displacements can be well estimated. For a case study, we choose KHST (Korean High Speed Train), obtained crush characteristic data of each carbody section from 3D finite element analysis, and established a 2D multibody dynamic model. This 2D dynamic model was suggested to describe the collision behavior of 3D Virtual Testing Model.

In this paper, the structural integrity and fatigue strength for the bogie frame of Monorail being developed in domestic was evaluated. Presently, the standard of evaluation for the bogie frame of monorail was not regulated. Therefore, the evaluation of the structural integrity and fatigue strength for the bogie frame was performed on the basis of the UIC 615-4 standard. The structural integrity of the designed bogie frame was evaluated by displacement and Von-Mises stress under each load conditions. And the fatigue strength was evaluated by combined main in-service load conditions specified at UIC 615-4 standard and it was compared with result of fatigue analysis using winLIFE v3.1 with the function of batch processing. The results shows that the structural integrity and fatigue strength of the designed bogie frame was satisfied, and the fatigue analysis using batch processing was more effective than conventional fatigue analysis using combined load conditions.

During braking of railway vehicles the repetitive thermal shock leads to thermal cracks on disc surface, and the lifetime of brake disc is dependent on the number of trimming works for removing these thermal cracks. Many tries for development of high heat resistant brake disc to extend the disc life and to warrant reliable braking performance has been continued. In present study, we carry out the computational fatigue analysis for thermal fatigue test in three candidate materials which were made to develop new high heat resistant material. Using FEM, we simulate thermal fatigue test in three candidate materials and conventional disc material. We then estimate the number of cycle to thermal crack initiation based on data from mechanical fatigue tests, and the results are compared with each material. For each material, the correction factor for $N_{f-40}$ which is the number of cycles when crack over $40{\mu}m$ was observed in thermal fatigue test is decided. From this study, we can verify the performance of thermal fatigue test system and suggest a qualitatively comparative method for heat resistance by FEM analysis of thermal shocking phenomenon.

According to development of method and device of Finite Element Analysis, the strength of welded joint is demonstrated by Finite Element Analysis not classical calculations. On the FEA, all of the joints for carbody are assumed to be ideal connections and the yield stress of welded joint is assumed to be the same to base metal. On these assumption, FEA is appropriate to evaluate the overall stability and strength of whole carbody. The classical calculation is appropriate to evaluate strength of specific welded joint and to determine the weld method and properties. Some project request strength calculation of the specific welded joints in addition to FEA, because of the demonstration of stability. The objective of this paper is the check of the consistency of the FEA result for the welded joints by the stress comparison between Detailed FE Model and classical calculation and the evaluation of the reliability of FEA result.

Recently the research for lightening the railway vehicle is actively made according to the demand of the environment-friendly technology development contributing to the energy cost reduction and the green growth. The railway vehicle lightweight research is expanded to the load-supporting first structure from the secondary structure which doesn't support the load. After the composite car body development used in the Korean tilting train is completed, the composite bogie frame development in which the weight reduction efficiency is large is progressed. In this paper, distributed strain was monitored when the train load was added to the central part of the composite bogie side-frame. By using the optical fiber which was attached to the lower part of the side-frame and the developed Brillouin correlation domain analysis (BOCDA) system, the strain distribution could be measured with 3cm step over 3m section. This strain distribution was compared with the design value by the FE analysis when the load of 14ton and 18ton added. This experiment can verify the manufactured composite bogie side-frame.

Cold area in korea, railway roadbed and gravel ballast was occurred frost-heaving. So during winter, track was rising and during thaw, track was sinking. In order to prevent the damage of frost-heaving, we have applied a few countermeasures which are circumfusion of calcium chloride and replacement of gravel ballast method. This countermeasures effect is feeble, not continuous and not eco-friendly. This study suggested that we use wasted tire-chips in frost-heaving area and considered appropriate new method to maintenance. This method was named "A Method of Wasted Tire-Chips Post". To prove effect of this method, we have tested in laboratory and field. The result of frost-heaving-ratio field test was decreased frost-heaving-ratio about 50% using "A Method of Wasted Tire-Chips Post".

Coarse granular materials such as gravel and crushed stone have been used as an important fill materials to large soil structure of railway, road, dam and so on. Although much studies for general soil materials have been carried out domestically, the studies for coarse materials were insufficient. Particularly, it is the level in which the study for dynamic properties(Elastic modulus and damping ratio) of coarse materials, applies the foreign country literature. This is due to the lack of large equipment for element test. But large soil structures made of coarse granular materials are generally important infrastructures. Therefore, the reliable design parameters for coarse materials should be obtained for safe and economic design, construction and maintenance. Triaxial test is the laboratory test method that is capable of controlling a confining pressure and boundary condition. In this project, we made a multi-purpose large triaxial testing system. This testing system is able to test coarse granular materials with maximum particle diameter of 100mm and support both the load control and displacement control. The load cell is installed inside of triaxial cell and the axial displacement is measured locally in order to control and measure more accurately in the small strain level. The verification test of this testing system was carried out with urethane verification specimens. So, from now on the useful information for coarse granular materials are expected to suggested by performing many tests with various material and condition.

The ground vibration which is induced by train leads defect and crack of neighborhood structure. Consequently, in order to reduce the train vibration, it is need to appropriate countermeasure. Wave-guide typed roadbed induce the train vibration to a channel wave forms using the difference of the track layer's stiffness. Therefore train vibration is restrictively attenuated along the longitudinal direction of the track. 5 kind of wave-guide typed roadbed structure is selected in this paper. A finite element, time history, linear spectrum, transfer function and damping ratio analysis are performed to evaluate the vibration reduction efficiency as the wave-guide roadbed.

본 연구에서는 K.Terzaghi의 유효응력이론을 인용하여 압밀기반의 안전하중 산출 과정과 결과를 제시하였다. 일반적인 강도를 평가하기 위하여 이용된 J.I.Solovyov의 순간강도 이론에 기초를 두어, 제시한 방법은 포화된 연약점토지반에서 도로의 유지보수 뿐 아니라 축조 과정에 안전하중의 계산 적용이 가능하다. 실제로 편리한 표준 압밀 drain test에서 정의된 점착력, 내부 마찰각과 같은 강도정수를 가진 유효응력은 실제적 적용을 고려하기 위하여 산출된다.

The study on mechanical behavior of the structure at the site includes experimental method and numerical analysis method. Experimental method is categorized into true-scale test and laboratory model test. A laboratory model test is to monitor the failure mechanism with a model simulated similar with a real ground so as to identify the quantitative result, while a true-scale model test is the approach which enables to identify the potential problems that may occur with a simulated construction situation similar with a real site circumstance. Thus this study was intended to carry out the experimental test of non open-cut excavation by pipe roof method which is mostly common in domestic sites. as well as was aimed at identifying the ground behavior occurred during pipe penetration using laboratory model test. Appropriate reduced-scale model was selected, taking into account of domestic geological characteristics and operation characteristics of traditional and high-speed rail trains and the qualitative evaluation of displacement was carried out based on a certain ground loss volume depending on excavation after categorizing trackbed settlement pattern by depth of top soil.

The construction of concrete track for the first time in Korea gives lots of meanings to civil engineering in various aspects. Settlement level needs to be kept minimal for the safety of the track. Concrete track has different structural characteristics comparing to conventional ballast track, so load distribution in concrete track is also different. Since it is the first time to build concrete track, there are very few experience and data available on the subject. Therefore it is important to evaluate how much load is transferred to the ground due to the running vehicle in concrete track and to determine the optimal thickness of layers. In this research, 9 individual earth pressure cells were installed at OOOk930 site in 2nd stage of Kyungbu high speed railway during under construction. The in-situ pressure data were measured at each layers during pump-car and locomotive were moving on the high speed railway surface.

The lateral stiffness of the track structure is very important mechanical property to prevent the track buckling and progress of misalignment. The increasing methods of the lateral stiffness of the track structure are the following; increases of the lateral ballast resistance, and increases of the lateral stiffness of the track panel. In order to increase the lateral stiffness of the tack panel, some of the sleepers resist together against the lateral movement can be the most economical and mechanical method. In this paper, H-typed sleeper developed to solve this problem is introduced and the mechanical advantages of this sleeper are investigated.

Rail is one of major track components for train service, it should be provided in the condition of flat and smooth driving aspect. Therefore, it is inevitable that there would be the field welding to integrate on CWR(Continuous Welded Rail) removing rail joint in these days. It is high chance to be some rail surface irregularity due to the limitation on the status of work condition If a high speed train runs on the rail surface irregularity in the welding part, big impact load comes to pass on that, so track irregularity cycle is reduced, therefore track maintenance cost can be increased. this paper has analyzed wheel load variation according to removing the rail surface irregularity using portable grinding machine in the high speed line. The result measured before and after in the field is decreased about 9.26% on the wheel load variation.

In this paper, a design program for electric railway pole foundation was developed by applying the estimation study performed by Korean Railway. There are two kinds of shapes in the cross-section of electric railway pole foundation: rectangle and circle. In foundation designing, The rectangular foundation should be satisfied with vertical, horizontal and moment equilibrium equations. On the other hand, the circular foundation should be satisfied with horizontal and moment equilibrium equations. The design program was coded into MFC(Microsoft Foundation Class) by MS Visual C. The equation's roots in the program were obtained by Incremental Search method. Dialog and property sheet(Wizard Mode) input windows were selected for user-friendliness. The biggest advantage of this program is to find an optimum depth in a given section.

While past traffic laws have focused on solving problems related to traffic congestion, the current legislation must play a role in reducing the social cost of solving traffic problems by forecasting future issues based on current traffic situations, setting goals in advance, and leading the traffic modal choice-trend. This paper verifies that the bimodal tram should be an alternative means of public transportation and proposes ways to introduce and promote it based on a government subsidy and the modification of traffic laws.

친환경 녹색성장 대표 교통수단인 철도는 자동차와는 달리 연계환승 체계가 꼭 필요한 교통수단이다. 이에 주요 철도거점역을 중심으로 하는 연계체계의 필요성은 국가적인 핵심 사업으로 필요하게 될것이다, 따라서 이용고객의 환승체계의 시스템이 이루어지지 않으면 녹색성장 및 대중교통 활성화 서비스는 멀게만 느껴질것이다. 아울러, 본 연구에서는 경남지역 철도거점역(창원, 북창원, 마산) 과 타 교통수단간 연계 환승 구축 및 활성화 방안을 소개하고자 한다. 이 방안은 지역거점역의 연계환승체계 구축 모델이 될 수 있을것으로 판단되며, 철도 대중교통 이용고객 편의를 위한 방안으로 적용이 가능할 것으로 판단된다.

Deciding peak-time demand will be most important factor to decide facilities' capacity of complex transfer centers. Concentration of demand is growing more and more in urban railroad that has 3 minutes headway by using MOE of 15 minutes demand. It is far from reality. Moreover there are various demand and reflection of business facilities' demand and commerce facilities' demand is being requested in complex transfer centers. This study focused on it and suggested demand calculation method about facility design of complex transfer centers.

철도역세권개발사업은 사업운영자나 시행자, 민간사업자 등 주관적 이해관계에 따라 시설의 중요도가 다양할 수 있지만 무엇보다도 고객만족도 측면에서 철도이용자에 대한 관심이 중요하다. 철도역사 내부시설은 호텔, 백화점, 업무시설, 위락, 편의시설 등을 유치하여 이용자 생활공간으로 만들고, 역사내외 연결통로, 철도, 지하철, 버스, 택시, 자전거 등을 연결한 종합 환승터미널, 보행자 동선 등 이용자의 편리성 시설이 매우 중요하다고 할 수 있다. 본 연구에서는 철도역세권 개발사업의 역사이용시설 편리성면에서 중요인자를 AHP기법을 이용하여 상대적 중요도를 분석하여 우선순위를 도출하였다. 철도 이용자와 철도공사 직원의 비교 분석결과를 보면 가장 상위중 요인자인 역사이용시설 중 직원이나, 시설이용자 모두 동일하게 여객시설, 승강시설을 중요순위로 선택하였다, 세 번째 중요수위는 직원은 이동시설을, 고객들은 위생시설을 선택한 것으로 나타났다. 하위중요인자 결과를 살펴보면 직원, 고객 모두 여객시설 중 승강장, 대합실에서는 휴게시설, 승강시설에서는 에스컬레이터, 이동시설에서도 에스컬레이터, 안내시설에서는 점자블록, 부대시설에서는 주차장을 중요하게 선택하였다.

최근 교통정책이 '녹색교통', '저탄소 녹색성장', '지속가능 발전'이라는 주제로 혼잡감소 및 환경오염감소에 초점이 맞춰짐에 됨에 따라 철도를 포함한 친환경적인 신교통수단의 도입이 중요한 이슈로 거론되고 있다. 현재 신교통수단은 BRT시스템, 바이모달 트램, 경전철 등으로 구분되어 있으며 그 중에서도 본 논문에서는 바이모달 트램을 중심으로 BRT시스템과 비교 및 분석하여 이에 대한 연구를 진행하였다. 바이모달트램의 경우, 하이브리드 타입의 추진장치로 인해 타 신교통수단보다 매연과 소음, 진동이 작아 미래지향적이고 친환경적이며 공사비가 상대적으로 저렴할 뿐 만 아니라 철도의 정시성과 버스의 접근성을 갖춘 시스템이다. 따라서 본 논문에서는 수도권과 지방 대도시권을 중심으로 도로로부터의 수단전환 교통량, 통행속도, CO2 배출량을 지표로 선정하여 타 신교통수단(BRT시스템)에 비해 바이모달 트램의 도입 적절성이 가장 높음을 제시하고자 하며, 향후 국내 도시의 다양한 기능적 측면에 부응할 수 있는 도입전략에 활용될 수 있는 방안을 모색하고자 한다.

GTX(Great Train Express), the wide area express train of a big city center of metropolitan area, is the best new transportation method able to realize 'Low Carbon Green Growth' for solving traffic congestion of the metropolitan area with the connection the metropolitan area into 40-minute life zone by speeding up the standardized velocity, making the route straight and reducing the compensation of land using the space of 40~50m below the ground. In the transportation sector all over the world, if it turned into the public transportation system focusing on the train at a point of time that low carbon green revolution takes the initiative, national competitiveness would be enhanced by reducing the emission of carbon from cars by 1/6. Accordingly, this study is to look into the efficient operation in accordance with GTX construction superintended by currently Gyeonggi province and to consider the optimum operation plan of GTX that are proper for the actual circumstances of the country by comparatively analyzing overseas cases that took their positions as new transportation by curtailment of transit time through highspeed such as London area, Paris area, and Tokyo area etc that are similar to Korean metropolitan area.

Bimodal trams are run by a guidance system and combine the functions of buses and trains. The trams have been highlighted as an alternative means of public transportation due to their accessibility, mobility, and arrival accuracy. While bimodal trams can be implemented on existing roads or by road expansion, with the narrow road conditions in Korea, studies must be performed in advance on suitable lane and platform locations and the exclusivity of lane use. This paper proposes plans for the location of bimodal tram lanes and platforms, whether in the median or at the road’s edge. In addition, methods of efficient bimodal tram operation are discussed, including the implementation of exclusive tram lanes.

바이모달트램은 접근성과 정시성의 측면에서 철도와 버스의 이점을 모두 갖춘 신 대중교통 시스템이다. '저탄소 녹색성장'의 국가 전략에 부합하는 바이모달트램은, 앞으로 대중교통으로써 중요한 역할을 담당할 것으로 기대된다. 대중교통은 인구통계학적 특성, 이용자의 행태, 재정상태 등 여러 조건의 영향을 받기 때문에, 본 연구에서는 바이모달트램의 도입여부를 결정하기 위해 고려되어야 할 지표들을 정의하고, 도시별 도입수준을 결정하기 위한 BSI(Bimodal Score for Introduction) 값을 산정하도록 한다. 본 연구는 신 대중교통 시스템으로써 바이모달트램의 도입을 추진하려는 도시의 의사결정에 도움을 줄 것으로 기대된다.

KTX Introduced in korea have occurred enhanced services and reduced regional travel time. "Induced traffic" is defined in the traffic demand generated in new project. 'Induced traffic' compared to the Diversion Demand Survey and research on ways to quantify the situation, insufficient analysis of constant and long-term observations are needed to estimate the changes in demand. In this study, Induced traffic effects due to the opening of KTX for analysis survey to passengers by Railway and the scale factor induced traffic review.

새마을 동차를 유지보수하는 용산기지의 이전에 따른 새마을 동차를 유지보수 할 기지가 없어, 현재 내구연한 20년인 새마을동차의 조기폐차가 논의 되고 있지만, 철도차량의 도입에 많은 비용이 소요되고, 정확한 정책판단이 요청되어 경제성 분석을 시행하였다. 분석을 위해 기존의 PP동차를 조기 폐차하는 경우와 신규간선형 EMU를 도입하는 경우, 철도차량정밀진단을 통해 PP동차를 내구연한을 초과하여 사용하는 경우를 시나리오 설정을 통해서 경제성분석을 시도하였다. 경제성 분석을 위해서 크게 유지보수비, 운영비, 차량감가상각비(차량 잔존가액)와 조기폐차에 따른 부대적인 비용을 산정하여 분석하였다. 특정한 철도공사의 사례이지만, 디젤차량과 전기차량의 운영비적인 측면에서 상세한 검토자료가 될 수 있다.

바이모달트램은 '저탄소 녹생성장' 이라는 국가 교통정책 패러다임에 따라 향후 대중교통체계에서 중요한 교통수단으로 기대된다. 최근 바이모달트램을 도입하기 위해 여러 지자체에서 검토가 이루어지고 있으나 바이모달트램 서비스 수준에 따른 시설 및 운영요건에 대한 도입 매뉴얼이 없는 것이 현실이다. 본 논문에서는 바이모달트램의 도입수준은 저급, 중급, 고급의 3가지로 구분을 하였으며 시설수준과 운영수준을 기준으로 하여 세부요소별 정의를 하였다. 본 연구는 신교통 수단인 바이모달트램을 도입하려는 지자체에 바이모달트램 도입수준에 따른 시설 및 운영요건을 고려하는데 도움을 줄 것으로 기대된다.

Recently the Korean Government is increasing investment and interest on railway in the transportation field as "low carbon and green growth" policy become main national development strategy. While railway competitiveness is weakening over the road from the inconvenient door-to-door and transfer system of railway, it is meaningful to review excellent railway transfer system of advanced countries and adapt their implications for Korea. Their transfer systems like Japan, Hongkong, France, U.K. and German can be categorized in this research as kinds of transfer & connectivity system and transfer facility & flow planning, and, as a result, their implications can be concluded. Also, analyzing transfer system of Korea's main stations and reviewing the difference between Korea and other countries, this paper suggests main principles and directions of urban planning, alignment of rail line, partnership of project stakeholder in the establishment of transfer system in the railway station in the future.

KIMM(Korea Institute of Machinery and Materials ) and ROTEM have been leading development of the low to medium speed urban transit maglev for the past 20 years. The result of this long term national project is UTM-01 ( Urban Transit Maglev -01 ) in 1998 and UTM-02 in 2006 and the 6.1 km long double track maglev commercialization project in Inchon international airport from 2006 to 2012. In this paper the status of the maglev development for the past 20 years is reported. Design changes in key technologies - maglev bogies, secondary suspension system, levitation system, propulsion system, major power suppling equipments from UTM-01 system to that of commercialization project - are described.

Since a long time ago, many railway engineers analyze and discuss the interface between the sub-system of railway, such as a wheel/rail interface, pantograph/catenary interface etc. The verifying of the system interface could help to achive the optimized performance and safety of the railway system considering that the railway system is constructed by various engineerings, such as civil, mechanical, electrical, etc. A rolling stock with distributed drive system, which will be developed by HEMU-400x project, is capable of running on high speed line and conventional line in Korea. To verify the performance of rolling stock, test run will be done with revenue service line. And the test items of the system interface have to be selected to verify a functional compatibility and physical force between rolling stock and infrastructure. In this paper, the authors will indicates the test items to verify system interface. To achive the conclusion, the authors analyze a specification of the development train and the design value of Seoul-Busan high speed line, which will be used for testing of the development train, and also, study the various case of high speed train commissioning.

A comprehensive review for the selection of urban rail vehicle systems that best suit Gimpo railway line is taking place with consideration of the project area characteristics in light of line planning, passenger demand, supply of rolling stock, and railway construction and operation. Various aspects of vehicle systems including passenger demand on concerned lines, regional characteristics, vehicle types, and railway construction and operational settings should be taken into consideration. In addition, request for the introduction of customized vehicle systems reflecting the convenience of transit users such as wide and hospitable inner space, low noise, flexible operation of 2 to 4 car train-set and eye catching slim bridge piers is increasing. A study on alternatives to place an order to opt for optimum rolling stock systems considering line characteristics of Gimpo City's urban railway and future passenger demand while meeting the needs of Gimpo City has been conducted.

Railway is facing a new era by the remarkable technology-intensive development of railways in the rolling stock and track, trains and infrastructure facilities. But the relevant provisions of the regulations for the various driving speed limit accept most of the past rules and it is desperately needed to realize the efficiency of the train operation. In addition, because the rules that drive too many treats of redundancy(the same information is duplicated in the other company policy provisions), they can cause confusion among employees, and also because of the contents of the detailed provisions dealing with almost same regulations, they can cause probable failure and big accident. In this study, the relevant provisions of the current rules are analyzed and overcome problems to improve efficiency and duplicated contents of relevant provisions to drive trains are merged. Also by reorganization of complex speed limits, we can understand easily when even the unusual situation and make a simple decision to prevent accidents. As a result, we can establish the system by doing subsequent actions quickly and accurately.

Since it started the researches on a maglev train on 1960, Germany and Japan arrived to putting to practical use level and accomplished most tests from their test-line. Korea is in progress the preparation for a practical use of low-speed maglev train in 110 [km/h] class and Korea Railroad Research Institute(KRRI) is in progress of a research about core technology of maglev system for high-speed tube train of 700 [km/h] class. In this paper, authors suggest an effective design method of Linear Synchronous Motor(LSM) for high-speed tube train of 700 [km/h] class which has a wound type electro-magnet. Then, authors calculate a variety of properties by changing speed of the LSM model which is designed by a method based on some theoretical equations. Then, authors verify the validity of the method based on some theoretical equations through a verification of property values by Finite Element Method(FEM) analysis method. Finally, in order to design a shape of pole-shoe part of LSM electro-magnet which is hard to design with a basic design method, authors analyze a transition of property values by changing a pole-shoe width and current of the electro-magnet through an analytical method by FEM.

It is inevitable to control the systematic failure to obtain the software safety integrity of embedded software installed in rolling stock. Because it is not possible to assess systematic failure integrity by quantitative methods, SILs are used to group documentation, methods, tools and techniques throughout software development lifecycle which, when used effectively, are considered to provide an appropriate level of confidence in the realization of a system to a stated integrity level. Normally, safety approval process is through generic product, generic application and specification application for. For safety approval on generic application of software based system, it is required to apply the certified software processes from the planning stage for the assigned SIL. As such, we will develop project specific application with high safety integrity within time limit of contractual delivery schedule through software assessment to the modified area with the re-use of certified software module and documentation. At this point, Hyundai Rotem has developed software processes applicable to support SIL 4 based on EN50128 which was assessed and certified by TUV SUD. This paper introduces the Hyundai Rotem's detailed approach and prospective action to achieve software safety integrity level.

With skyrocketing number of people who use smartphone, the technology of wireless internet that is mobile-phone, Wi-Fi, Wibro, HSDPA has been developed remarkably. The environment that one can use wireless internet easily and inexpensively anywhere has been made. So, the customer of railway have needs and desire that could use the wireless internet network as travelling in rolling-stock. Although KTX, KTX-II and some subway agency has built-up wireless internet network and serviced it, it's closed infra and inconvenient environment has been criticized. So, we survey the wireless internet network that is serviced at present and the way to build wirelee internet infra to satisfy the needs of customers.

Recently the demand of the driverless rolling stock is increasing with advancement of the stable communication technique and control technique. The automatic train operating system has advantages which takes low operating cost and is able to dispose elastically in demand. Beside it provides high safety and effectiveness because it will be able to control power, signal and communication system from Operation Control Center and the safety and effectiveness are high. The establishment of PSD, Platform Screen Door, is advanced in the goal which is passenger safety, fire protection, noise and dust reduction etc. When but, two advanced systems also have risks of operation delay and accident when two systems are not controlled smoothly. Thus, I'll introduce control method between onboard controller, door control unit in rolling stock and PSD controller to help system design.

Various design factors should be considered in order to apply the concrete slab track system on the soil/rock roadbed. One of the important factors is the settlement of roadbed. This settlement of concrete track should be supervised under the allowable settlement limit. If the settlement of roadbed under the concrete track exceed the allowable limit, the train serviceability will considerably come down and furthermore the fatal disaster may happen. Therefore, in this paper we introduced a PRCG(pressurized rapid-hardening cement grouting) method as a settlement restoration method that can be suitably adopted to the concrete slab track.

High rock-fill embankment is relatively flexible, which makes crest of embankment subject to excessive amplification in displacement due to earthquake loading. To overcome problems related with site response in high embankment, it is essential to evaluate shear-wave velocity profile of the embankment with improved accuracy and reliability. In this aspect, an experimental research was performed to answer how to perform surface-wave tests and to analyze measurements at an embankment site with a sloping ground surface. Unlike flat ground surface, sloping ground may hamper and slow down propagation of surface waves due to multiple reflections and refractions in embankment. To figure out this reasoning for the effect of multiple reflections and refractions due to sloping surface, surface wave tests were performed at a reservoir embankment of Chung-Song in North KyeongSang Province. Parameters involved in surface wave tests at non-flat surface, including source directionality, geometry-related constraint and frequency components in source function, were investigated using field measurements.

고속철도교의 기초로 많이 사용되고 있는 매입말뚝에서 천공으로 이완된 지반과 말뚝 사이의 충전재로서 기존 포틀랜드 시멘트계는 쏘일시멘트 강도가 낮고 시멘트 용출로 인한 지하수 오염, 희석 및 일수현상으로 인한 지표부 지반의 이완, 수평 저항성의 감소 및 내구성의 저하, 하중분담효과의 저하 등 안정성 확보 문제와 환경오염 문제를 내포하고 있었다. 특히, 고속철도교의 경우 열차진동, 급정거시 충격수평력 작용, 지진 등 일반 구조물 기초와는 달리 다양한 측면에서 안정성 확보가 필요하며, 기초 시공 분야도 저탄소 녹색성장이라는 친환경 기조의 시대적 요구사항을 고려해야 하는 실정이다. 더불어 경제성 및 공기 단축 등 시공성 확보까지 가능한 새로운 미래형 친환경 기초공법의 개발이 필수적이다. 따라서 기존 공법의 내구성 및 내진성, 내수평성을 개선하고, 환경오염을 최소화 할 수 있도록 새로운 충전재료의 개발과, 시공방법의 개선을 통해 구조적 안전성과 환경적 저해요소를 최소화하기 위한 다양한 시험 및 기초연구를 실시하였다, 이를 위해 수중불분리성과 고유동성, 고점성, 고침투성, 조강성 등을 동시에 가지는 신개념의 고성능 다기능의 충전재를 활용하여 기존의 시멘트계 충전재와의 적용성 비교시험을 실시하였다. 그 결과 기존 매입말뚝 공법 및 마이크로 파일 기초에 적용하였을 경우 연직지지력, 수평저항력 등 많은 측면에서 뛰어난 적용성을 보이고 있어 향후 다양한 추가 연구를 통해 새로운 친환경 기초로의 개발도 기대할 수 있을 것으로 판단된다.

The method in a bid to make better use of limited urban space amidst increasingly expanding urban area have been attempted in various ways. Efficient using underground space is one of the examples. The pipe roof and excavation for underground crossing implemented in this study was the part of evaluation of such attempt. However, the pipe roof method for underground crossing may cause the ground surface to be uplifted or settled down, having effect on structure above the ground. Thus in this study, a laboratory model test designed to evaluate the effect on surface during implementing pipe roof and excavation was carried out. The ground displacement during pipe roof advancing and excavation is usually occurred in a radial shape but as the study focused on trackbed, the evaluation included ground settlement only. Thus, appropriately-scaled model was selected considering domestic geological characteristics and operation characteristics of traditional and high-speed rail trains and the qualitative evaluation of displacement was carried out with a certain ground loss depending on excavation after categorizing trackbed settlement pattern depending on depth of top soil.

The highest priority for passenger safety should be system performance guarantee in LRT(Light Rail Transit) based on a fully-automated manless metro system. In order to realize spotless manless automatic operating system through system performance guarantee, the role of SE(Systems Engineering) is of utmost importance. Currently, SE initiatives for local LRT projects are not cost-effective and heavily dependent on overseas firms due mostly to the lack of knowledge and experience in SE. This paper aims to review the appropriateness of cases of SE implementation on the basis of LRT projects either in progress or in the introduction stage to local market by examining, comparing and analyzing the applied cases.

서울에서 경남 진주까지 예전에는 철도와 도로교통수단을 이용할 경우 6시간정도 소요가 되는 구간이었지만, 2001년 11월 29일 당시 대전~진주간 고속도로가 완전 개통된 이후로 도로교통이 우세를 보이며 자가 차량과 고속버스에 철도교통은 그 경쟁력을 잃어 이용객이 줄고 하루 1회밖에 운행하지 않는 구간이 되었다. 본 연구는 이 구간에 대해 다양한 자료를 비교분석하여 진주 및 경남 서부지역은 물론 계획 중인 중부내륙선 철도와 연계하여 경남 서북부권과 경북 서남부권을 아우르는 지역이 도로교통수단과 경쟁을 하고 철도이용을 활성화 할 수 있는 가이드라인을 제시하고자 한다.

전동열차 운행시격은 적정 서비스 수준 유지 또는 경쟁력 향상 등 외부여건에 대한 고려보다는 수요를 기반으로 한 첨두시 재차수요와 열차별(편성량수에 따라 변경) 수송능력에 따라 일률적으로 산정되므로, 도시철도와 달리 수요 집중도가 낮은 수도권 외곽 광역철도 노선의 경우 첨두시 운행시격이 최대 20분 이상으로 설정되어 이용 편의성 부족으로 인한 경쟁력 저하 및 이에 따른 이용고객 증가가 곤란해지며, 이러한 수요 정체는 운행시격 단축의 저항 논리로 작용하는 악순환이 지속되고 있다. 본 논문에서는 광역철도 운행시격 산정의 문제점과 개선방안 도출을 위한 기초 연구로서 수요 특징과 운행시격 산정 기준을 제시하고, 운행시격 산정 기준의 문제점을 혼잡도, 편성당 차량수 및 시간 경쟁력 측면에서 검토하였고 철도운행시격과 수단이용률의 상관성 조사 및 운행시격 단축에 따른 비용-수익 분석을 통해 철도 서비스 측면에서의 운행시격 접근의 필요성을 제시하였다. 또한 운행시격 산정방식 개선을 위해 지역별 특성을 고려한 기준 적용의 탄력성 부여, 편성당 차량수 차별화, 철도 활성화를 위한 정부 정책적 고려 및 운행시격에 대한 철도 서비스 기준 설정의 필요성을 제안하였다.

한국철도공사는 비수익 노선과 해당 노선의 운행 열차에 대한 폐지를 통해 수익성을 개선하고 있다. 그 일환으로 통근열차 구간이 다수 폐지되었으며 현재는 경의선과 경원선의 통근열차 노선만이 운영 중에 있다. 그러나 지역 주민들의 열차운영 요청이 여전히 존재하는 바, 이에 기존의 단순한 통근열차로서의 기능에서 한단계 더 진행하여 KTX와의 연계를 꾀할 수 있는 Local선 운영 정책이 필요하다. 본 연구에서는 전체적인 과거 통근열차의 운영정책과 성과와 기존 운영정책의 문제점을 고찰한 후 외국의 고속철도와 연계한 적자 로컬선의 운영정책을 분석하고 호남선 인근 도시로 지역을 축소하여 익산-전주간 연계셔틀에 도출된 발전방향을 적용하고자 한다.

As the major sources of interior noise of train at running condition are the wheel/rail contact noise, the traction motor's noise and the driving gear's noise and these noise sources are transmitted through the car body, the noises of HVAC and air duct can be ignored. But the interior noise of train at standstill condition is decided by HVAC's noise and noise from the diffuser through the air duct. the interior noise prediction of train at standstill condition should be performed considering the shape of air duct, the air velocity and noise reduction property inside the air duct. But it is hard to estimate the interior noise level by the numerical method. Therefore train maker predict the interior noise level using The commercial noise prediction program. This paper introduce the noise prediction method of the train at standstill condition using the commercial program appling the ray tracing method and statistical energy analysis.

The KTX-Sancheon has been commercially operating on the high-speed line since March. 2. In order to verify the performance of high-speed train and core equipments such as current collection system, sophisticated tests and evaluating procedures should have been considering. In this paper, the load cell with a built-in strain-gauge which developed to improve measuring method of contact force between the pantograph and catenary system is introduced. The static test results of the load cell shows that its design is very suitable and applicable for the dynamic test and on-line test. After the test and evaluation of load cell's dynamic calibration with pantograph, we will be applied to test interaction characteristics between the pantograph and catenary system on the high-speed line.

Line 2 is being operated in 10 cities and it composed the amount of rolling stock combination. Line 2 rails have more curved than straight rails. So, wheels and rails were damaged. Accidents or delays caused many social problems. so it is important that wheel and rail are efficiently managed. Here, find out the cause of wheel-slip characteristics and workarounds were studying. Chapter 1 Background and Purpose. Chapter 2 about wheel slip problem and seek way improving adhesiveness. Chapter 3 Conclusion.

Most of operating railways in domestic, it is used to be Wheel flange lubricator system applied liquid spray type. Wheel flange lubricator are reduced the abrasion of wheel flange through spraying in accordance with operating on the curve or operating function of time base and/or distance base. this paper is written to introduce and study the efficiency for the angular velocity sensing type of lubricant systems.

The railway vehicle consists of wires, bodies, bogies and wheelsets, and each part has very complex mechanism. In this paper, wheel-rail contact algorithm is implemented using C++ and inserted into the ODYN which is a dynamic analysis program. To analyze wheel-rail contact mechanism, information such as contact points, contact angle and rolling radius is calculated according to the wheel and rail profile. Using this information, a table for the calculation of the wheel-rail contact analysis is made according to the lateral displacement. And, the creepage and normal force are calculated and a creep force is estimated by the FASTSIM. To verify the reliability of the wheel-rail contact algorithm, results of the program are compared with the ADAMS/Rail and paper. Finally, a wheelset of the railway vehicle is modeled using ODYN and simulated static and dynamic analysis. And, to verify the reliability of the simulation results, a displacement, velocity, acceleration and force are compared with results of ADAMS/Rail.

In this study, interior noise of the high speed EMU was estimated by statistical energy analysis (SEA) method. Based on the data measured at a distance of 25m from a running train, exterior noise of the running train was calculated. And then it was designed as noise sources in VA ONE, a commercial software of SEA. coupling and damping loss factor of high speed EMU studied in previous studies is used. The interior noise of the train was estimated for a open-land section. The analysis of interior noise of HST in the tunnel section will be estimated through same method.

선로에서 철도 차량이 편성운전을 할 경우 연결기가 장착 되는 각 차량 끝단 부는 선로, 대차, 연결기 등의 변위에 따라 복합적인 움직임을 갖는다. 특히, 선로의 회전 반경과 경사도, 대차의 수직과 수평방향 움직임 그리고 연결기의 압축은 차량 끝단 부의 움직임에 많은 영향을 주고 있다. 이 논문에서는 CAD 프로그램인 CATIA V5를 이용하여 선로, 대차, 연결기 변위를 손쉽게 입력 및 변경하고 선로 위의 차량 끝단 부의 움직임을 가시화 할 수 있는 시뮬레이션 기술을 제시하고 있다.

In Korea, the next generation high-speed train, whose target is maximum speed of 400km/h and operating speed of 370km/h, has been developed since 2007. In this paper, the safety of the next generation high-speed train is compared UIC 518OR under the malfunctioning situation of the suspension system. The bogie of the next generation high-speed train has two suspensions. Two different vehicle models of the next generation high-speed train are created by using VAMPIRE and ADAMS/Rail, which are specialized to design railway vehicle. And Those models are showed same dynamic properties. First of all, the sensitivity analysis of ModelCenter is performed using model of VAMPIRE. One suspension element which has significant effects on the safety are selected by result of the sensitivity analysis. And then, the dynamic analysis when the suspension element is broken is performed using ADAMS/Rail. The 30km track between Pungsegyo and Biryong tunnel in Gyeongbu High-speed Line was used at the dynamic analysis. The estimated value is found by using the normal method of UIC 518OR. The estimated values on the normal/fault state and the limit values of UIC 518OR are compared. Finally, the safety of the next generation high-speed train is verified.

This paper is focused on a simplified measurement of rail irregularity by some axle-box accelerometers for high-speed rail condition monitoring with in-service high-speed trains. Generally, the rail condition monitoring has been done by a special railway inspection vehicle with a 10m versine method. But, the monitoring method needs some expensive measurement system, and have been performed only at night due to its speed limit. In this research, a simplified measurement of rail irregularity using axle-box accelerometers is proposed to monitor the rail condition with in-service high-speed trains. The acceleration is measured by using two accelerometers on a axle-box, and stored in an on-board data acquisition system. The displacement is estimated from the acceleration data by a combination of Kalman filter and the frequency selective filter. The estimated results are compared with the measurement from a laser rail inspection system which is near the axle-box. From the comparison, the proposed method shows promise as a tool for the simplified measurement of rail irregularity at high-speed.

Aluminium extruded panel is the most important element for sound insulation in a express train. However, comparing with the flat plate with the same weight, the extruded panel shows remarkably low sound transmission loss above the 1st local resonance frequency, which is determined by the dimension of the core structure. Preceding study showed the possibility of the improvement of sound insulation performance by properly designing the core dimension. By the proper core design, local resonance frequency shifts to higher frequency region without any reduction of bending or torsional strength and without any weight increase. Based upon this result, this study investigates in detail the design modification of the core structure of the aluminium extruded panel used in a express train under development, in aspect of sound insulation. Design result is compared with those of other developed models.

Ride comfort is an important factor for the development of a high-speed train. The aerodynamic force to a high speed train inside tunnels increases the car-body vibration and makes its ride comfort worse. In this study, the aerodynamic force is estimated through a CFD analysis using ADINA, and its car-body vibration and ride comfort are calculated for the aerodynamic force which acts on the side of the train. The numerical results show that the vibration is a lateral mode of the car-body and decreases the ride comfort. On the basis of this numerical simulation, more accurate simulation is necessary for the shape of tunnel and the lateral suspension system of a high speed train.

This paper discusses the numerical study on the stability of the high-speed EMU by developing its lumped parameter model including the effect of the creepage. The 6, 10 and 14 degrees-of-freedom (DOF) lumper parameter dynamic models are developed and the critical hunting speeds calculated from each model via Matlab software are analyzed and compared. It is demonstrated that the critical hunting speeds decrease while the degrees-of-freedom increase. In addition, the parametric study is conducted to extract major design parameters to influence on the stability of the high-speed EMU.

The noise emitted during train operation is generated with various reasons. It is known that the major noise generation is classified according to the ranges of train speed; that is, engine noise at lower speed range, rolling noise at medium speed range, and air-borne noise at higher speed range. These noises are transmitted in combined form with the noises generated from track components and under-carriage, etc. The rolling noise as a major noise at medium speed range is caused by the vibration occurred at wheel/rail interface. The vibration occurred at wheel/rail interface is transmitted to wheel and rail, and this vibration is emitted from wheel and rail as a noise. The object of this study is to investigate the effect of wheel damper of low noise wheel. In this study theoretical and experimental analysis is performed by numerical model calculations and impact test.

The Purpose of this paper is to characteristics and analysis of ride comfort by using HRV. Although the riding comfort of trains has been managed by setting allowable accelerations of 3-axis motion in cabins, it is impossible for this approach to express the psychophysical relationship between various vibrational factors and riding comfort. in order to propose a function to evaluate the riding comfort of train on conventional railroad, an experiment was performed with the Korea Tilting Tran eXpress(TTX). As a result, by referring to some international standards on the method of evaluating ride comfort, a modified method was proposed to evaluate the lateral vibration in addition to the roll motion on carve transitions.

In this paper, To estimate the train exterior noise and environment noise which are occur when High-Speed EMU is driving with the speed of 370km/h, Estimated sound source about noise that is appeared during operation based upon noise SPL values. Based on aero-dynamic noise source and wheel-rail noise source, these were already used to the existed research, we have estimated each sound power about measured noise, and computed the sound source to apply on the High-Speed EMU, and also calculated the sound power in case of the maximum operation speed of 370km/h.

Railway signal facilities are very important because they are directly related to safe train operation. By the result of the unification of signal and station control, station control staffs have been having a hard time to grasp the knowledge about signal facilities and the fault restoration ability in a short term since the existing manuals were only made with text materials. To meet the growing demand to educate the maintenance work in actual and effective way, the maintenance manuals and periodic procedures was developed in the forms of video clips and animations with quality contents onto a DVD enabling not only to improve the maintenance works for signal facilities but to contribute budget saving and profit generating.

According to the korea standard (KS)'s definition through 'KSC IEC 61643-1(2007), A SPD(Surge Protective Device) is an appliance designed to protect electrical devices from voltage spikes and the principal components used to reduce or limit high voltages can include one or more of the nonlinear components. 4 type of those nonlinear components are utilized in accordance with korea standard's IEC regulation. The SPD is installed the place(in and out side of installation for protecting damage due to the inflow of light surge) which we need by combination of nonlinear components. In this study, the analysis based on the characteristics of SPD from PF track circuit are discussed.

Transmitting correct train control information is important in a train control system which demands safety. The train control information includes the maximum speed of trains, position of preceding trains, incline of tracks and curve sections etc. A radio frequency-communication based train control system is influenced by the noise and interference because the train control information is transmitted by wireless between a on-board system and wayside system. The radio frequency-communication based train control system is a mobile communication system due to moving trains. The inter symbol interference(ISI) occurs by the multipath fading in the mobile ommunication system. As signal-to-noise ratio(SNR) is decreased by the ISI, the train control information is not received correctly. In case of tunnel section, numerous reflected waves exist. Therefore, the power density of receiver is decreased by difference among the received times, magnitudes, phases through the multipath. So, the train suddenly is stopped by the fail-safe operation in the train control system on account of decreasing the power density of receiver. In this paper, a line of sight model-(Additive White Gaussian noise(AWGN) channel), rayleigh and rician fading model are presented. Probability density functions which are related to the SNR are derived from the models. The fading phenomenon severely occurs as a result of analyzing the probability density functions. So, the space diversity method is used in order to reduce the fading effect and it is demonstrated by using Matlab program.

LRT(Light Rail Transit) is currently adopting a more upgraded signal system these days. This latest signal system is a train on-board signal system with moving block based on the realtime bi-directional wireless communications. The system applies RF-CBTC(Radio Frequency - Communication Based Train Control System) in order th execute fully automated manless operation. This paper reviews the performance requirements and safety of RF-CBTC that will be applied to the fully automated manless operation for LRT.

In this paper, we propose a simulator for testing of the Navigation Control System(NCS) in Bimodal-tram. NCS uses values of all sorts of sensors installed in vehicle to decide current position, and to control speed and steering of vehicle to go to a next position. Major functions of simulator are input processing of the driver and generation of virtual sensor data and driving profile(navigation path, magnetic information), and the NCS function. Virtual sensor data is generated according to output data from the NCS, driving profile and input processing of the driver, and monitoring systems is operated separatedly to confirm of NCS operation. This paper discusses about the implementation of the simulator, and analyzes and evaluates the simulation results.

In high speed railway, event recorder is essential system for analyzing the cause of train accident. It stores train operation sent by train control system in safe memory unit. Crash protected memory, the safe memory unit for event recorder, keeps the stored contents from severe environment. For crash protected memory, we have designed the architecture of concrete enclosure and controller board. Proposed system provides large volume of memory capacity and fault tolerance architecture. For checking the characteristics of proposed crash protected memory specification, the simulation is executed. Simulation results shows the designed crash protected memory meets all requirements.

There have been lots of researches for High Performance Digital Signal Processing performance enhancement on a GPU(Graphic Processor Unit). These kinds of parallelizing can enable massive signal processing, so we can have advantage's of processing various of signal processing standards with GPU. In this paper we introduce Low Density Parity Check(LDPC) which is one of the Foward Error Correction(FEC). And we have achieved computational time reduce by using CUDA as a parallelizing scheme.

The TVM 430 system manufactured by Ansaldo STS in France is currently used in ground signalling system for Kyungbu HSR. It transmits the speed information to the on-board signalling system in the form of continuous signal via the track, and the rolling stock in Kyungbu HSR runs with 300km/h max. operating speed by using the corresponding information. Looking from the recent international trends in HSR, reducing the travelling time and increasing of the line capacity is promoting via the improvement of train speed. In case of TGV Est, they are realizing the normal operation with 320km/h max. operating speed by using TVM SEI signalling system, which is similar to TVM 430. Furthermore, in case Honam HSL, which is under construction, is looking over faster speed than the limited one of Kyungbu HSR(i.e. over 300km/h). In this paper, it is assumed that the existing TVM 430 ground signalling system is used and train speed is improved, therefore the number of block section to be increased depending on the increase of train speed and the standard speed to be used in this case is drawn via the simulation of the train model and described the method accordingly.

The high speed line and conventional line are a single-phase AC feeding system; and power supplies of different phases meet at SS(SubStation)s or SP(Sectioning Post)s. These sections should be negotiated with the main circuit breaker in the traction vehicle switched off, whereby the length of the neutral zone prevents the pantographs shunting adjacent overhead line section. In order for electric railway vehicles to make power running there, there must be a power supply changeover section (approx. for 1km), where a changeover switch changes a power supply to the other power supply of a train running direction sequentially. For a thorough changeover switching control, the precise train position detection is necessarily required. In this paper, to realize the ground-based train position detection method, configuration scheme of train position detection equipment is suggested by using track circuit and axle counter.

Conventional traffic network in the urban city has been constructed and operated under systems to collect and transmit based on the roadside AP(Acess Point). But This paper has investigated the new traffic network based on smart station which combined the power network. Futhermore, the smart station can collect and transmit the variable informations and functions that supply the vehicle moving lines, informative collector service and center interoperation etc.

The intelligent safety system for level crossing which employs information and communication technology has been developed in USA and Japan, etc. But, in Korea, the relevant research has not been performed. In this paper, we analyze the cause of railway level crossing accidents and the inherent problem of the existing safety equipments. Based on analyzed results, we design the intelligent safety system which prevent collision between a train and a vehicle. This system displays train approaching information in real-time at roadside warning devices, informs approaching train of the detected obstacle in crossing areas, and is interconnected with traffic signal to empty the crossing area before train comes. Especially, we present the video based obstacle detection algorithm and verify its performance with prototype H/W since the abrupt obstacles in crossing areas are the main cause of level crossing accidents. We identify that the presented scheme detects both pedestrian and vehicle with good performance. Currently, we demonstrate developed railway crossing intelligence system at one crossing of Young-dong-seon line of Korail with Sea Train cockpit.

This paper presents the methods to acquire the Safety Certificate from Independent Safety Assessment based on the IEC standard62279 which is commonly applied to railway system for Automatic Train Control(ATC) system in accordance with Urban Maglev project. This also shows approach methods and relative activities for project life-cycle to accomplish and ensure the system requirements of ATC system, RAMS and S/W quality activities. Furthermore, the key tasks conducted with ISA are noted in detail. These kind of activities for software quality of ATC system to obtain Safety Certificate could be a CASE model to improve the quality of domestic railway system and products, and also contribute to the growth of railway business and toward the achievement of overseas' railway signaling markets.

Experimental studies for the high damping rubber bearing, lead rubber bearing and natural rubber bearing, those are often used to improve the seismic capacity if the structure recently, are conducted to evaluate the seismic capacity of the seismic isolation bearings. The shear stiffness of the bearings decrease and the shear strain amplitude or the constant axial load level increase, but not sensitive to the strain rate effect. Bearings are strong for the axial compression but weak for the axial tension.

There are execute of new laws about prevent of earthquake diaster in nation because of some increments of big earthquake occurence frequency. Now develope new composit plate by ductile fiber with strong mechanic materials, which compose of strengthening systems for the underground structures subject to forced displacements. This study is to focus to develop the retrofitting system for the cut and cuver tunnels built without earthquake type load scenario, so that it can provide the safety of existing urban subway system against earthquakes.

High speed railway structure, contact of vehicle needs to design considering the running stability(dynamic behavior). Also, upper structure has to satisfy design standard about moving load, high speed train(KTX). So, the high speed railway structure has to satisfy the requirement of natural frequency, vertical acceleration on deck, face distortion and vertical displacement considering ride comfort, which is suggested Ho-nam high speed railway design standard. In this study, it was investigated and evaluated to the dynamic behavior for a double-rib arch railway bridge subjected to moving load considering real high speed train loads.

The verification of the seismic performance of many urban railway bridges will be done or is done by the regulations of "Seismic Performance Evaluation Methods(Tips) of Existing Bridges" developed by KISTEC in 2004. This present process may involve some of the issues such as the unreflecting of the characteristics of the urban railway bridge and the appearance of ductility-based seismic design method. In this paper, the new and improved seismic performance evaluation system is proposed.

This paper addresses prospect of the technology for development of NxTIS (NeXt generation Transport Information System) that is targeted to shifting Korean public transit framework to railway-centered one. The Seoul metropolitan area has adopted the smart-card as a payment system for the public transportation since 2004. The transportation record can be used as quite useful information for better planning and operating of the railway system, particularly when the smart-card based payment system is extended to whole nation. This paper introduces technologies to develop Real OD DB and NxTIS, and presents road-map for them. A variety of benefits from the development of the system are estimated both in quantitative and qualitative. The Real OD DB based NxTIS will work to highly prospective for creating a novel value in the railway as a public transportation system.

This paper describes an energy efficient train control. In these days, the researchers develop the energy efficient railway technologies, such as energy storage system, energy efficient driving. Mass rapid transit (MRT) railways, which are an important means of public transportation in urban areas, have operational characteristics that include short headways, frequent departures and arrivals. Therefore, when multiple trains are operating in the same power supply system, it is important to synchronize the energy tractions and regenerations. This paper define the group of trains for energy saving according to a power supply. We analyze the current synchronized driving situations and estimate the effect.

In the case of railway freight, there's a lot of process at railway freight terminal. In these days, for operation efficiency improvement, Load/Unload planning is being carried out research. Load/unload problem can be classified as track assignment, container assignment, yard truck route problem, unload equipment scheduling, container yard plan. In this paper, we focus on track assignment and container assignment among the load/unload problem. we analysis information architecture to solve this problem. And we compares two precesses for existing method and optimization method of track/container assignment processes. An contents different analysis of two methods can shows reformation of an information architecture for load/unload process in the railway freight terminal.

Because of global warming, the new environment energy policy was already announced. The role of Green-railways is increasing in the field of railway. The government announced a policy direction of science & technology basic plan. The field of railway transportation proposed various railway transportation policy and plans. In this paper, I presented technical trend analysis for railway policy and railway operation field. Technical trend analysis at home and overseas are classified into railway industry technology, railway transportation system technology, railway operation efficiency technology, railway logistics technology.

The high-speed railway track occurs train operating result track irregularity, subsidence of the track, ballast abrasion. This is the unusual condition. High-speed railway track maintenance task is the behavior which repairs unusual section by using the human resource or machine resource. The resource used to maintenance task is restrictive. A resource can be efficiently used if the high-speed railway track maintenance scheduling is used. So the more task can be performed in the fit time. In conclusion, this manages the unusual condition of a track efficiently. So additional expenses is minimized cause by deteriorating unusual condition. And it offers comfortable ride to passenger. However, maintenance scheduling has to reflect well practical situation and environment. That's maintenance scheduling is used. We gather the opinions of the hands-on workers. So in this paper define field situation and condition. And suggest mathematical model about this. And we developed the track maintenance scheduling software engine using ILOG.

The objective of this paper is to propose a Binary Artificial Bee Colony (BABC) to obtain the best/optimal solution for NP-hard scheduling problem of railway track maintenance. We can greatly maximize the objective value using proposed BABC within limited computation time. The proposed BABC mechanism is very efficient to find the best solution because of employing fewer control parameters.

Recently, there are environmental issues for sustainable transportation system to pursue the energy-efficient and environment-friendly public urban transit. These transportation system needs to offer demand-oriented high-quality service being on the same level with cab service for urban space. PRT(Personal Rapid Transit), small track-guided vehicle, is repeatedly mentioned as a possible alternative for the new urban public transportion system, but but there are not many researches on the operational optimal routing for PRT network. In this paper, the concept of PRT and general optimal routing methods are reviewed. And we suggest the optimal routing method for city-wide PRT network with multi-vehicles and stations, junctions and directional arcs. Futher research directions for PRT routing are presented.

In these days, rail container service is being more important because it has relatively simple network. In addition, small lot sizes of shipment, frequent shipment, and demand for flexible service are important characteristics in rail container transportation. Efficient container operation at terminals is important in reducing transportation costs and load/unload time. This paper describes the assigning track of freight trains in the railway freight terminal. The paper addresses the operational requirements and facility restrictions to construct a mathematical model for track assignment. In addition, it suggests several types of objectives for the model.

Railway safety management information systems are now being developed by various railway related organizations. A large number of railway safety related data were gathered from railway operators, railway infrastructure manager and railway intendance, etc. The meaning of these data can easily be defined by each organization or developer with little regard for reusing of data by others. Until the present, the main efforts for data management focused on classifying the railway safety data by subject for the developer's convenience and how to combine these data each other is not interested in. In this study, data integration is considered from the viewpoint of combining them semantically in order to get more useful information from partially informed data of multi agencies.

This study is about developing a transit assignment model on railway network. Current transit assignment models are mainly focused on road or urban transportation so that these models, for example, transit assignment model based on optimal strategy generates unrealistic transit assignment. Especially, since the advent of KTX, more passengers are using the transfer route containing KTX but most transit assignment models have a shortcoming that transfer is not considered or is overestimated. We present a new stochastic transit assignment model based on LOGIT considering transfer resistance.

The tensile failure behavior of polymer matrix composite materials was investigated with the aid of a nondestructive evaluation (NDE) technique. The materials, E-glass fiber reinforced epoxy matrix composites, which are applicable to carbody materials in railway vehicles to reduce weight, were used for this investigation. In order to explain stress-strain behavior of polymer matrix composite sample, the infrared thermography technique was employed. A high-speed infrared (IR) camera was used for in-situ monitoring of progressive damages of polymer matrix composite samples during tensile testing. In this investigation, the IR thermography technique was used to facilitate a better understanding of damage evolution, fracture mechanism, and failure mode of polymer matrix composite materials during monotonic loadings.

Currently in design and manufacturing of railway train overseas markets, criteria for a collision condition between vehicles is noted in design specification. In the event of a train crash, it can be verified by crashworthiness analysis or an actual crash test for car's performance to keep the safety of passengers and to minimize the effect of damaged for vehicles. In this paper, it is described for carbody structure to meet the allowable condition in collision analysis through improvement of shape, position and arrangement for carbody frame. This report describes the shape of end frame for carbody structure and the results of analysis applied to actual cases for overseas.

Fatigue design and evaluation of welded joints are typically carried out by weld classification approach in which a family (theoretically infinite) of parallel nominal stress based S-N curves are used according to joint types and loading modes as well as extrapolation-based hot spot stress. Traditional finite element methods are not capable of consistently capturing the stress concentration effects on fatigue behavior due to their mesh-sensitivity in stress determination at welds resulted from notch stress singularity. The extrapolated hot spot stresses tend vary, depending on the element sizes, types, joint types, and loading mode. however, the equilibrium-equivalent structural stress method(E2S2) has been recently developed through several joint industry projects as a robust method to analyze welded components using finite element analysis. This method has been proven effective in correlating a large amount of published fatigue test results in the literature such as master S-N curve and has used for evaluating the fatigue life of welding components. In this study, fatigue analysis of the welding bogie frame is examined using E2S2 method with master S-N curve.

중앙 안내방식의 모노레일대차 구조는 세계최초로 인천 월미모노레일에 적용되었으며, 대차프레임 소재 또한 우리나라에서는 최초로 알루미늄 재질을 사용하였다. 대차는 수직하중과 수평하중을 노면과 가이드 레일에 전달하는 중요한 시스템으로서 내구성이 충분한 구조를 가지고 있어야 할 뿐만 아니라, 우수한 주행 성능과 승차감이 확보되어야 한다. 본 논문에서는 중앙 안내방식의 모노레일에 적합한 대차 구조를 비롯하여 대차의 주행성능 및 승차감을 확보할 수 있는 시스템 구성 방법은 물론 대차프레임의 내구성을 향상 시킬 수 있는 방안에 대해 제시하였다.

An operating information and fault recode of train is very important information for safety driving and maintenance. And these information is increased and need high speed as the number of trains is increased. Wireless LAN or CDMA network is efficient to report more complicated and various information from vehicle to server in control center. Existing wireless transmission system has weakness due to transmission system is separated with TDCS and standalone. At first, standalone system needs space to be installed and cost is increased. And data transmission capacity and speed is limited by complicated structure that transmission system receive data thru serial communication like RS232 and then data transmission system send data to server in control center. This article is study to develop embedded & wireless fault code transmission device to be installed in TDCS to overcome weakness of space and to have more cost effective and simple structure. It is adapted 802.11b/g WiFi for wireless communication and OS is used embedded Linux that can easily implement wireless communication environment and ensure TCP/IP communication’s security. We also implement simple server to test wireless communication between embedded & wireless fault code transmission device and server in control center.

The next generation domestic high speed railway system is a power dispersed type and uses vector control method for motor speed control. Nowadays, inverter driven induction motor system is widely used. However, recently PMSM drives are deeply considered as a alternative candidate instead of an induction motor driven system due to their advantages in efficiency, noise reduction and maintenance. In this paper, the maximum torque control approach is presented for the IPMSM drives with reluctance torque. The applied control method uses maximum torque control per ampere technique. Simulation programs based on Matlab/Simulink are developed. Finally the designed system is verified by simulation and their characteristics are analyzed by the simulation results.

High-speed traction has voltage source variation because the electric power of tractions is supplied by difference traction power system according to operating section. This paper proposes the robust control maintaining constant output performance against voltage source variation for PWM converters of the high speed traction. The proposed scheme consists of feed-forward compensation for current controller by on-line calculating the rms voltage of voltage source. Total dynamic performance of high speed traction can be improved by the reduction of the output voltage ripple which is resulted from voltage source sag and variation. The superior performance and validity of the proposed scheme is proved through the simulation.

This paper deals with the influence on the dynamic response of I-type girder railway bridge with high-speed electric multiple unit(HEMU) train load. This bridge system which has six I-girder and several cross beams, is modeled with plate and frame elements. And the upper slab is assumed to be fully connected with girders using rigid rinks. Span lengths, types of vehicle and running speeds are selected as parameters for analyses. For more exact analysis, it was adopted that 3-dimensional section of bridge models was produced by the assumed design wheel loads of HEMU vehicle at 200~350 km/hr speeds. Dynamic vertical deflections, dynamic amplification factors and vertical accelerations of bridges having 30 and 35 m span length were investigated and compared with the limit values specified in various national railway bridge specifications.

Recently, many railway stations are built under the railway line in urban area. The passage of railway vehicles generates mechanical vibrations of a wide range of frequency. Thus, it is required to place structural vibration isolation systems to reduce vibration and noise originating from surrounding environments. This study utilizes elastometric bearings as a vibration isolation system. The slab track system on elastometric bearings is called "low vibration track" or "floating slab track." In this low vibration track system, dowel bars or plates can be installed to minimize the discontinuity of displacement between adjacent floating slab tracks. This study is to numerically investigate the effects of dowel members on static behavior of the low vibration track. The study involves two steel dowel systems including dowel bars and dowel plates. Each dowel system is analyzed under the service load condition to assess load transfer efficiency (LTE).

Daegu urban railroad line 3 is introduced with straddle-type monorail system within the country at the first time. This system is long line with 24km in total length which has not the results of construction in Korea. The rail beam of monorail bridge to be constructed/ installed in the city is adopted on the basis of the PSC rail beam. It is required to apply the steel rail beam at rapid/ curved line parts or location to be required the long span bridge as passing river and intersection. The composition of span bridge is various and the height of bridge is change with each section and exist the different curve radius due to all section is passes in the city. The rail beam shall be considered the ground conditions and then consider the construction methods. It is analyzed to construction period of PSC rail beam to be linked with period of infrastructure construction and construction of steel rail beam, structure construction of station etc. It is compared to crane construction methods and launching girder as alternative construction methods and propose to upper construction methods which is superior in economic and construction.

In the railway bridges, steel plate girder types are preferred due the high stability. Nevertheless, it has been pointed out that this type of bridge has problems such as, structural damages in the rail and girder seat, noise problem due to impact at the rail joint and excessive vibration. This vibration and/or deflection are mainly because insufficient stiffness of steel plate type of bridge. To resolve these problems, PC-Slab composite plate girder type which has simple process and economic cost, is proposed in this study. The static and dynamic experiment is performed by using the production of actual sized PC-Slab and abandoned steel plate girder. The object of this experiment is to verify the fact that girder stiffness increase and structural safety. The result of the experiment is used to analyze the effect of performance improvement of PC composite plate girder type. Using this method, economic rail maintainers, girder stiffness increase, and also speed/ride improvement even for existing rail could be expected by dynamic performance improvement. Additionally noise due to impact, deflection and vibration caused from long rails can be reduced.

This paper has shown that Linear Induction Motor(LIM) and Rack and pinion type are efficient in selecting railway routes and systems after considering time, geo-spatial characteristics and the floating population by benchmarking domestic and overseas mountain trains. The benefit-cost analysis through the use of modeling on user's willingness to pay is conducted as a means that provides access to tourism resources. this paper concludes that the benefit-cost varies in response to changes in the amount of user's willingness to pay by age. It is expected that this paper serves as a reference data in the introduction stage of the mountain train project implemented by central or local governments with tourism resources in mountainous areas as the mountain train has turned out to be economically efficient while various potential benefits that have not been included in the benefit-cost analysis need to be quantified and remain to be studied further.

This study is designed to provide a facilitation program of the railroad tourist business that the bicycle is connected with the railroad. The sustainable growth will be achieved thorough the green growth being able to coexist with environment. To deal with the transportation problems -the environmental pollution caused by a large number of cars and the energy depletion, the traffic congestion- in our society is the prerequisites for the green growth. There is the need focusing on the expansion of the green network and the policy implementation of utilizing the bicycle, the formulation of the social consensus for environmental preservation. This provides the opportunity that we create the customer values and reinforce the firm's competitiveness. This study is to propose the plan for accelerating the tourism business connected to the bicycle, and to contribute to the government policy, to boost the green image of the railroad. Approaching in the strategic way to increase the customer's value and environmental preservation, this study will contribute to providing high quality customer service for both of the business performance and the customer satisfaction.

As the life quality is higher and higher, the requirement for the clean air in a subway station is strongly being increased. Therefore, many researches have been performed about that. Seoulmetro has taken many parts and has applied latest products for the higher level of air quality. However, by various kinds of facilities, it is hard to maintain the facilities and verify their performances. Therefore it is better to use qualified air filter system by the performance test at subway stations than to apply newly developed one without any verification. This study is focused on the performance verification for a panel structure, which consists of non-woven fabric, to suggest the standard of air filter systems.

도시철도는 시민을 빠르고 안전하게 수송하는 대중교통의 중심축이다. 도시철도차량의 유지보수는 고장 방지를 위한 예방정비의 개념이며 정해진 규정과 정비지침에 따라 시행되어야 한다. 신뢰성 있는 검수설비는 유지보수의 정확성과 전동차 운행의 정시성을 보장할 수 있다. 부산도시철도 전동차 검수용 검수설비를 자체 기술로 개발하여 활용한 사례 연구를 통해 유지보수 과학화와 전동차 안전운행 및 업무 효율 향상 방법을 고찰하고자 한다.

본 논문에서는 현재 VVVF 직류전동차에 장착되어 있는 보조전원장치(SIV)180KVA용에 사용되는 필터콘덴서(FC) 유지보수 및 사용한도에 관한 연구를 수행하였다. 차량의 장기사용에 따른 내구연한과 혼잡도 부하에 따른 가선전압 변동 및 부하변동에 대해 출력 전압값의 변화와 SIV장치내 중요소자인 GTO Thyristor, Power Transistor Module 소자가 단락되는 현상이 자주 발생되는 등 고장원인을 분석해 본 결과 보조전원 장치내 필터 FC1~4 캐패시터의 입력측 고조파 성분의 필터링이 제대로 되지 못하는 것을 알게 되었으며, 캐패시터의 장기 사용에 따른 성분변화와 외부조건에 의해 천천히 특성변화를 일으킴으로써 사전 점검방법 및 불량 시 측정하기 어렵다는 점을 착안하여 본 연구를 검토하였다. 이를 위하여 본 연구에서는 캐패시터의 유지보수를 통한 관리와 측정방법의 개선점, 캐패시터의 수명 사용한도에 대해 검토하였다.

It is said that the number of people using public transportation has risen about 220 thousand over 3 years which was 1019 people average a day in 2006 and 1041 people last year. It is also said that the number of people using subway has increased by 198 thousand and the number of people using bus by 22 thousand. Can you imagine how many door engines work at the same time if we count Metro line no.1 to no.4 which consist of total 120 subway stations? A train has 80 door engines and Metro line trains have 9600 door engines all together. Which explains it quite simple how much Satefy, Durability and Sustainability need to be focused in Door Engines. Although it's not the whole part of door engines in Seoul Metro Line, And Metro No.4's door engines are operated by the method called mixture of mechanical type and belt type. And the last one is being used in the brand-new Metro train line No.3 which is being operated by electricity motor, instead of the old methods which use air pressure to operate a door engine. I'm sure you will agree that Safety is the first priority of Metro train and next follow comfortability and quickness. I think all I've talked so far make it the first step for the Safety of Metro train for you to understand the unit of a Door Engine.

The TBO of main unit of propulsion control devices on high-speed railway vehicles proposed by the makers is appropriated 10 years cycle, but the maintenance of internal device are proceeding before coming to the particular period of time. In the Future, increasing of the failure probability occurred by increasing train service and obtaining spare parts are predicted that it would be difficult. the propulsion control devices develop is needed in other to the ease maintenance, cost savings and ensuring related domestic technologies when considering operating on long term of high-speed railway vehicles. In this paper, we proposed development a way that current-controlled type propulsion control devices using the newest power semiconductors which is easy to supply and demand through identifying performance and characteristics of existing current-controlled type propulsion control devices of high-speed railway vehicles.

This paper supposes the vector control algorithm to estimate the rotor position of permanent magnet synchronous traction motor using the hall-effect sensor. The hall-effect provides 60 electrical degrees resolution in rotor position sensing and it is very low resolution. The algorithm makes resolution high as optical encoders or electromagnetic resolver. If necessary, the reference rotor position angle is controlled by adjusting the variable. When a rotor position sensor such as either a optical encoder or a electromagnetic resolver is misalignment, it is useful to align with those. The method on adjusting the reference rotor position angle can compensate for misalignment error degrees by 60 electrical degrees.

Recently, the Seoul Metro has replaced the old series of Line No.2 and 3 to the new ones. In spite of the replacement, the new ones are more likely to be slippery compared to the old ones. Because the subway system has such short intervals, delayed subways influence the whole line systems, especially during the rush hours. And the slip causes the delay. Therefore we are willing to find out the reason why the new ones are more defective and we will try to mince it from the view of mechanical aspects and handling aspects of driving.

The propulsion Motor system has changed from the DC motor system to the induction motor system. Although the induction motor system has almost reached the stage of maturity, this system also need changed to the IPMSM system for direct drive without reduction gear. Thus, the IPMSM(Interior buried Permanent magnet synchronous Motor) has been adopted to meet the driving specification. In this paper, loss characteristic analysis of IPMSM has been performed using adopted F.E.M.

The latest generation of tram is low-floor design, various nations in europe and japan have developed battery driven hybrid trams that combine battery and wiring. Battery driven tram system is achieved by contactless power supply system, thus system is needed high efficiency, high power and low weight traction motor for maximization of energy efficiency. Research from abroad is still in induction motor(IM) application, and it is not meet the efficiency and the power per unit volume in IPMSM. In this paper, we design compare IM and IPMSM to apply battery driven tram, and then compare these motors. To design the motor, we estimate the loading condition at first. Loading condition includes rolling resistance, air-drag resistance, and slope resistance. Based on the loading condition by estimation, we determine the power and compute rated voltage and rated current. In this paper, voltage is limited by battery voltage level. As a result, volume about IM is 1.98 times bigger than IPMSM under same condition. Even though IPMSM is bigger than IM in power density per volume, we consider more factors for actual application because there are demagnetization of permanent magnet in IPMSM and so on by external environment conditions.

This paper describes the evaluation of structural integrity and dynamic characteristic of inertial load test equipments for performance test of railway vehicle propulsion control system. The propulsion control system of railway vehicle has to be confirmed of safety and reliability prior to it's application. Therefore, inertial load test equipments were designed through theoretical equation for performance test of propulsion control system. The structural analysis of inertial load test equipments was conducted using Ansys v11.0 and it's dynamic characteristic was evaluated the designed using Adams. The results showed that the structural integrity of inertial load test equipment was satisfied with a safety factor of 10.2. Also, the structural stability was proved by maximum dynamic displacement of 0.82mm.

A paradigm shift in driving system of transportation vehicle from engine to electric motor is required as the problems on air pollution and drain of petroleum resource are on the rize. Moreover while it is possible to control the motor with variable frequency driver, the application of motor in various kinds of vehicles is spread rapidly. In the paper, the effective design method of IPMSM for EV and HEV by using equivalent magnetic circuit and finite element method (FEM) is suggested. First of all, load conditions of the application are calculated. And basic design process of IPMSM is proposed with two design point. Finally, in order to verify the proposed design process, it was compared with the basic design parameter and the FEM analysis results.

Interior Permanent Magnet Synchronous Motor(IPMSM) produces two kind of torque that Magnetic and Reluctance torque. The permanent magnet linkage flux Ψa and d-axis and q-axis inductance have an important influence on the torque characteristic of IPMSM. Thus their accurate prediction is essential for predicting performance aspect such as the torque and flux-weakening capabilities. In this paper, we compared the characteristic parameters and operation region of two type IPMSM which has different pole numbers.

A linear induction motor have advantages for reducing mechanical frictions and noises because it has thrust force by induced torque instead of friction force between rail and wheels. An it has additional advantage for reducing volume of bogie frame for light rail transit. The small volume causes the cost of construction down. Recently, researches of linear induction motor for thrust force of the light rail transit have been actively studied. For the rail transit, vehicle is running as follow accelerating and constant speed, finally decelerating speed passing local stops between stations. The light rail transit have only these three patterns of operating. Thus, design of that has different design specifications from others. In this paper, the linear induction motor for the light rail transit was designed considering the goal speed, accelerating time, and accelerating distance for approaching the goal speed. The designed motor was proved that it could meet the requirement of accelerating performance by2-dimensional finite element method and mechanical dynamics equation.

모노레일은 그동안 과좌식과 현수식으로 분류 되어 왔으나 세계 최초로 도입한 중앙 안내 방식의 인천 월미은하레일은 신개념의 Y Beam을 가이드 레일로 사용한 새로운 형식의 모노레일이라 할 수 있다. Y Beam은 안내륜을 통해 모노레일의 수평 하중을 전달하는 역할을 담당하고 있기 때문에 수직 하중을 타이어를 통해 전달 받는 콘크리트 바닥 및 강재 Beam과 함께 모노레일의 주행 안전에 없어서는 안 될 가장 중요한 구조물이다. 본 연구에서는 수평 하중을 감당하고 있을 뿐만 아니라 모노레일의 안정과 안내를 함께 보장 하면서 급전선을 지지하는 역할도 동시에 담당하고 있는 Y Beam과 Y Beam을 고정하는 클램프의 특성과 안전성에 대해 고찰하였다.

We proposed a design procedure for Korean Precast Slab Track system. Korean Precast Slab Track system cannot use the same design procedure to German slab track system because of different shapes and some problems. We identified the problems of German slab track design system that cannot simulate effects of loads. This proposed procedure is implemented for the commercial software of ABAQUS. Using this procedure, one can consider uncombined effects between slab panel and hydraulic sub base, effect of close sleepers.

Tubular member is hollow and is an excellent source of structural member with great buckling resistance and tortional resistance. With its development and simplicity in structure, steel tubular truss has the ability to be structured in long span bridges, without a stiffener. Recently, it has been used in many countries in Europe, Canada, Japan, and the US with the help of international committees such as CIDECT(International Committee for the Development and Study of Tubular Structures and International Institute of Welding). The most important problem when using the tubular member is the fact that it is difficult to test the fatigue stress determined by nominal stress, since geometrical stress concentration occurs due to the welded joint's nod of complexity. The purpose of this study is to compare and examine current theories and widely applied Hot Spot stress determinations through finite element analysis, which is about welded joints of steel tubular truss. We would like to suggest a way of design practice which involves a bridge plan with rarely domestically used steel tubular truss` basic research data as well as considering the future of tubular member.

지하철 구조물은 수화열에 의해 균열이 발생하기 쉬우며, 균열을 최소화하기 위해 시공방법(순차/건너 뛰기 시공 등)의 개선 등 많은 노력을 하고 있으나 아직 이에 대한 상관성을 분석한 바가 없다, 이 논문에서는 시공길이(6m, 9m, 18m), 벽체높이(2m, 3m, 4m,), 콘크리트 배합(1종+FA20%, 4종+FA10%, 3성분계), 콘크리트 타설시기(봄/가을, 여름, 겨울) 및 시공방법(순차시공, 건너띠기시공) 등 14개 항목을 각각 조합하여 온도균열지수를 산출(378개)하여, 통계착적 처리를 통해 상관성을 분석하였다. 또한 ”온도균열지수표“를 작성하여 현장의 콘크리트 타설 여건의 변화에 대응하여 쉽게 활용할 수 있도록 하였다. 또한, 콘크리트 타설을 순차적으로 시행하는 경우와 건너 띄어 시행하는 경우에 대해서도 그의 상관성을 분석하여 급속 시공 방안을 검토하였다.

This paper aims for proposed the deflection limit on vibration serviceability of high-speed railway bridges considering the exposed time duration when a train passes a railway bridge. For this purpose, bridge-train transfer function was derived and bridge-train interaction analysis was performed by using the derived function. The vertical acceleration signals of passenger cars obtained from bridge-train interaction analysis were compared with them from the bridge-train transfer function by moving constant force analysis. Therefore it was estimated possible to induce the comfort deflection limit of railway bridge by using bridge-train transfer function. The deflections by moving force of single span bridge and continuous bridge were assumed as sine and haversine wave. The deflection limit on vibration serviceability of high-speed railway bridges considering the exposed time duration can be expanded using bridge-train transfer function and bridge comfort limit considering serviceability due to bridge vibration. And it was compared to other allowable deflection limits of railway bridge design specifications.

Application of long-span bridge, which is affected by parameters such as span length, shoe boundary condition, track property and stiffness of superstructure and substructure etc., can vary. Especially, by CWR aspects of the axial force, that can be less constraints of construction depending on whether the application of rail expansion joint(REJ), which has disadvantaged in terms of maintenance. In this study, it was performed parameter study for multiple variables (shaft length, the upper and lower cross-section characteristics, track characteristics, etc.) in terms of CWR aspects. Structure-rail interaction analysis was applied to the typical simple span PSC Box and 3 span continuous bridge Extradosed Bridge(50m+80m+50m) excluding REJ. If you set the boundary e of variables for long-span railway bridge excluding REJ through the this study, when designing future is expected to be able to useful.

Railway has been pointed to the efficiency of transportation, rapid transit, and comfortable train ride. the construction of railway near the downtown area and station building are increasing for maximization of utilization and convenience. but the heavy of transportation and rapid transit lead to increase noise and vibration. The noise and vibration of railway may cause the civil appeal, decline in the serviceability and insufficiency of environmental standard. In this study, floating slab vibration and repeated connection of devices to support joints and fatigue stress analysis of punching shear performance review was conducted to evaluate the safety.

In this paper, the dynamic stability evaluation of special bridge for high speed railway under ground excitation is performed. The mass, damping, stiffness matrices of bridge are derived from the modal frequencies and mode shape vectors which can be obtained by commercial program. And the high speed train is modeled as multi-single d.o.f models for the sake of vehicle-bridge interaction analysis. In the vehicle-bridge interaction analysis, the vertical directional interaction is only considered. As a numerical example, the 3 span Extradosed bridge which is expected to be installed in Ho-Nam high speed railroad is considered. The analysis results show that the example bridge satisfies the criteria of dynamic stability.

In 2004, Korea has become the world's fifth-express train states, Honam high-speed railroad which goes down another line with existing Kyoungbu high-speed railroad is divided 19 construction sectors, its total length is 230.9 km and it will be constructed by 2017. This site is located in Jeollabukdo Jeong-eup district along 9.38 km. There are three representative bridges. ;One is the PSC box girder bridge, another is the Extradosed bridge, and the other is the three continuous spans half-through hybrid arch bridge. This paper shows a planning and design of these bridges.

In this paper, the nonlinear dynamic response of Vehicle-Bridge interaction with the coupled equations of motion including nonlinear Hertzian contact is presented. The moving train model is chosen to have 10 degrees of freedom (DOF). The bridge is modeled as 2D Euler-Bernoulli beam element with 4 DOF for each element, two for rotations and another two for translations. The nonlinear Hertzian contact is used to simulate the interaction between vehicle and bridge. Base on the relationship of wheel displacement of the vehicle and the vertical displacement of the bridge in Hertzian contact, the coupled equations of motion of the whole system is derived. The convenient formulation was encoded into a computer program. The contact forces, contact area and stress of the rail surface were also computed. The accuracy and efficiency of the proposed program are verified and compared with exact analytical solution and other previous studies. Various numerical examples and parametric studies have demonstrated the versatility and applicability of the proposed program.

최근 국내에서도 지진의 발생 가능성이 증가하는 추세이며 교량, 터널 등과 같은 공공이용시설의 안전에 대한 우려도 증가하고 있다. 특히 1988년 이전 건설된 도시철도 시설물의 대부분은 내진설계가 반영되지 않아 내진안전성에 대한 검토와 보강이 요구되고 있다. 최근 가장 많이 연구되는 내진보강법인 섬유보강공법은 섬유의 특성은 우수하나 내진구조물의 취약점인 취성적이라는 것이 단점이다. 본 연구에서는 도시철도 개착식 터널의 내진성능 향상을 도모하기 위하여 FRP에 연성재료인 스틸과 알루미늄을 적층하여 새로운 FRP-연성재 적층 복합체를 제안하였다. FRP-연성재 적층 복합체의 인장 시험결과, 알루미늄 연성재를 사용한 경우 기존의 FRP 보강재보다 최대강도는 비슷하였으나 최대변형률이 증가하였다. 본 연구에서 제안한 FRP-알루미늄의 적층복합체는 연성이 요구되는 도시철도 개착식 터널에 적용할 경우 내진성능 향상에 효과적일 것으로 판단된다.

This paper is intended as an development of moving load simulation techniques. The concern with dynamic problem of railway bridge caused by the moving train loads has been growing. Over the past few years, several studies have been made on dynamic stability of railway bridge analytically. But very few attempts have been made at experimental research. From the dynamic stability view point, the moving train loads simulation test is revolutionary idea. It can be replace restrictive filed test with new laboratory test. This study investigates minimum specifications of hardware and basic parameters. it is used 39m girder and 4 actuators for experimental verification.

The objective of this study is controlling of the large diameter Shield TBM excavation for subway tunnels. In this paper, it will focus on the selection of Shield TBM and the problems of excavation due to unusual abrasion of the Disk Cutters and the distorted Cutter Mounts, in mixed layer of soil in below and hard rock in above, and in rock layer. And also, it will be discussed that the type of ground improvement to change and repair the Disk Cutters and the distorted Cutter Mounts, Advance Rate, Cutter Torque, etc. The results of this study will be using controlling of the excavation in various large diameter Shield TBM for subway tunnels.

산악지형이 많은 지역에서의 고속철도 건설에는 노선의 선형상의 이유로 터널구간이 많이 존재하며, 터널 건설로 발생하는 암버럭을 유용하기 위하여 노반 건설은 주로 암과 흙의 혼합성토로 이루어지고 있다. 본 연구에서는 이암을 주암으로 하는 혼합토로 이루어진 고속철도 노반의 열차반복하중에 의한 침하특성을 분석하기 위하여 모형토조 실험을 수행하였다. 특히 강우 또는 지하수위 상승에 의한 노반의 포화도 증가가 열차 반복하중 작용 시 노반의 침하특성에 미치는 영향을 분석하기 위하여 초기 포화도 조건을 변화시키면서 실험을 수행하였다. 실험결과, 낮은 포화도 조건에서는 열차반복횟수가 증가할수록 침하가 어느 일정 값에 수렴하는 결과를 나타냈으나, 일정 수준 이상의 포화도 조건에서는 침하가 급격히 증가하는 것을 알 수 있었다. 따라서 노반의 포화도를 일정수준 이하로 관리하는 것이 침하 예방에 중요한 요소임을 확인 할 수 있었다.

Recently, the important of Progress Management is being emphasized because construction have become more complex and increasingly specialized. The existing progress control method needs to be changed because only numerical information is being provided and is very difficult to understand all poor progress. To resolve these problem, this study suggests a simulation method for progress management by using 4D CAD System because 4D CAD system has effective functions to convert numerical information to visualized information. The suggested simulation method not only are reviewed an application of railway construction but enables managers to understand problems in managing this system for verifying the suggested simulation method.

Measures on poor process should be identified by reviewing analysis of planned progress and actual progress for successful performance of Process Control. However, the existing Process Control only performances follow-up measures on poor process but it cannot prevent poor process which is not occurred. To solve these problems, this study suggests the three types of methods of process prediction(Regression Analysis) by using a progress rate which consists of planned progress rate and Actual progress rate.

현대의 측량기술은 위성항법시스템 및 원스톱디지털장비의 등장으로 지구공간상 어느 지점이라도 단일좌표체계의 절대성위치 취득이 가능한 시대로 진보하고 있다. 한편 철도의 속도는 나날이 고속화 되어가고 있어 철도건설시 궤도중심을 포함한 주요시설물 등의 위치를 결정할 때 고도화된 정밀성이 요구된다. 이에 따라 철도건설공사측량에서는 기술지원과 절차가 지침화되어 적용되고 있다. 본 연구에서는 철도건설의 설계와 시공 그리고, 유지관리로 이어지는 과정에서 철도건설측량지침 적용에 따른 측량시 문제점에 대한 대안을 시범지구의 실데이터를 통해 분석 연구 제시하였다.

Multi-purpose freight car is applicable for both bulk freight and containerized freight to cope with the unbalance between demand and supply due to the demand variation by seasons or directions. In this paper, we suggested the advantages of introducing attachable container to railway freight transportation and possible freight items to use multi-purpose freight car. This results can be used to analyse the amount of attachable container and the feasibility of introducing multi-purpose freight car to railway.

Transportation cost takes a major portion on logistics cost. The reduction of transportation cost is a key issue to achieve national competitiveness and logistics cost reduction. And railway must play a important role to shift from road freight transport to environment-friendly transport. There are many idle freight cars in railway freight transportation and they give rise to inefficient operation of freight car. It is well known that the main reason of idle freight cars is unbalanced demand according to direction. In this study, we analysed the current status on idle freight cars in railway at the level of daily data. This results help follow-up research to cut down idle freight cars in railway.

다목적 화차는 기존 평판화차 및 컨테이너 화차에 탈부착이 가능한 수송용기를 장착할 수 있도록 하여 컨테이너 및 무개화차 화물을 수송하는 화차를 의미한다. 본 연구는 탈부착식 수송용기 및 다목적 화차의 실질적인 적용 효과를 높이기 위해 품목별 물동량 및 화차운행횟수를 분석하고 투입 가능 구간 선정 및 운영방안을 검토하였다. 다목적 화차는 계절별, 품목별 급격한 수요 변동으로 인한 무개화차 활용도 저하의 문제점을 해결하고 화차의 운행 효율 및 활용도를 높임으로써 원활한 물류수송에 기여할 것으로 기대된다.

After the establishment of 'Staggers' Rail Legislation' in 1980, which established an atmosphere of free competition in rail freight transportation market, freight railway in America became larger and the proportion of freight railway in the market increased. In 2008, it took up 43% of the transportation market based on tonne/mile unit and the productivity of freight rail increased. On the other hand, in the case of Korea, the competing atmosphere is being set up under the influences of the renovation of the rail transportation industry in 2004. However, to make the rail transportation market more active and become more advanced, a lot of efforts are required to build a stronger foundation of free competition atmosphere. In this paper, we have deducted the political implications on the establishment of strengthened competition in Korean rail transportation industry from reviewing what kind of changes the rail transportation market in America went through and how it was developed. In this case, we have focused on the changes in industrial trend towards the restriction policy. Also influences of the deregulation policy after 1980 on the enhanced market efficiency were reviews.

The purpose of this study is to develop spatial configuration and area calculation method of warehoue. This paper deals with warehouses with palletized cargo since recently pallets are widely used in many warehouses to enhance efficiency. We identify spatial configuration and characteristics of each area. To represent realistic situations, we analyze characteristics of logistics equipment as well as interview results with expert warehouse architects. Through these analysis we suggest guidelines on area calculation of warehouse.

This paper deals with the development of warehouse layout design algorithm. In the developed model, receiving/outgoing areas, storage areas, picking/distribution areas, value-added operation areas and support areas are considered. For more efficient use of the warehouse floor space, a mezzanine floor is also considered. We develop heuristic algorithms of warehouse layout design for several cases: three types of warehouse and three types of flow. This study is expected to be used as a guideline in warehouse layout design phase.

To get insights and directions about national logistics policy, national logistics policies of U.S., EU, and Japan are analyzed in terms of objectives, strategies, and programmes. Each country's progresses of logistics policy frameworks give us the picture of logistics policy system to develop and contents of logistics policies suggest items to pursue as a national logistics programme.

China has experienced rapid economic growth and burgeoning trade since it began economic reforms and an opening policy. With this the amount of marine cargoes between Korea and China had been increased Recently this increasing rate of cargoes, the development of the Yellow Sea Sub-Region and the change of the Northeast Asian logistics network have acted as important factors of Korea's strategy to be the Northeast Asian logistics hub. This paper analyzes China's inland transport network to offer basic understanding on transport and logistics network in China. Therefore, the outcomes of this paper could be used as basic materials to further transport and logistics cooperation between China and Korea and to developing a more realistic plan to complete Korea's Northeast Asia logistics hub strategy.

The government have plans to improve the railway transport capacity and transport hub for the sustainable national transport and logistics system. Specially, there are much efforts to improve transportation capacity such as high speed transportation of rail freight, enlargement of BT train, development of double stack train, etc. between railway transport hubs. If the transport capacity between railway logistics hubs is increased as planned, we must increase the handling capacity of railway hub terminals. But there are limits to enlarge the terminal infrastructure because of investment scale, location circumstances and urban development plans. To ensure the capacity, with the minimum required enlargement of infrastructure, it is necessary to extremely increase the efficiency of terminal operations. For improving the efficiency, we have to introduce the efficient terminal operation systems based on u-IT and operation optimize technologies. In this paper, we analyse the issues and problems of railway terminals(including ICD) and suggest the concept of intelligent railway terminal and the construction components of technology.

교토의정서 및 발리로드맵 이후 우리나라도 2013년부터 온실가스배출감축대상국에 포함될 예정임에 따라 친환경물류에 대한 정부차원의 대책마련도 시급한 상황이다. 본 연구는 이러한 정부차원의 친환경 녹색성장 정책에 맞춰 가장 친환경적인 철도물류 및 복합운송에 대한 활성화를 본격 연구하게 되었다. 본 연구에서 나타난 의왕ICD 터미널 내 철도물류시설의 주요 문제점으로는 하치장 부족, 공용 CY 비활성화, 비주주사 이용불편 등으로 나타나고 있으며, 철도물류시설의 주요 개선방안으로는 하치장의 추가 확장, 공용CY 활성화를 위한 철도공사 직영 및 상시하역체계 구축 조성 등의 철도물류시설개선이 필요한 것으로 나타났다. 이러한 철도물류시설의 개선은 철도공사 또는 업체의 노력으로만 해결될 수 있는 사안은 아니다. 철도물류시설과 복합화물 터미널은 대규모의 투자자금이 필요한 시설이며 사회간접자본(SOC)성격이 강하므로 민간차원에서 개선하는 데에는 한계가 있으므로 정부차원에서 보다 적극적인 개선방안을 모색할 필요가 있다. 이러한 정부차원의 철도물류시설 개선은 친환경녹색물류에 대한 지원정책으로 물류정책기본법에 의해 지원이 가능하므로 세부적인 지침 등을 마련하여 복합화물터미널이 근본적으로 활성화 될 수 있는 계기가 마련되어야 할 것이다.

Recently, there has been an increase in interest from the aspects of transshipment and connection between the means of transportation. Not only for passengers but also for freight transportation as the need for transportation efficiency is growing while the importance of logistic railway transportation is emerging. The domestic freight transportation is carried out by roads, railroads, ships, and port. However, as other means of transportation, except road, is impossible for Door to Door Service, multimodal transportation accompanied by road transportation is carried out. Here, even though 'transshipment' occurs, because of the lack of basic data regarding this, it is difficult to reflect it in the demand forecasting. With respect to the Korean freight O-D, it was very difficult to have equivalent comparison on the competitiveness and availability of transportation services between the point of departure and the final destination. Taking into account the study of implementation of logit model considering the time and cost of transshipment of multimodal transportation and the transshipment resistance value upon selecting means of freight transportation on multimodal transportation was comparatively insufficient. This study consisted of questionnaire targeting shippers, and based on this, transshipment resistance value was calculated by deriving utility function. By doing so, I intend to examine the effect 'transshipment' has on selecting the means of transportation occurring from freight transportation.

The high speed rolling stock system considerably belongs to a special industry which requires large-scale investment cost but the recovery term is long. Therefore, to guarantee risk and possibility of technological success in initial investment, tools concerned with various expecting methods like life cycle costs analysis and credibility management are used. In view of this characteristics, the cases on cost structure for HSR RS previously invested should be studied and the method to appropriately allocate the life cycle of each sub-system like arrangement unit, electric device, braking device, door and car body should be realized. Moreover, the environmental aspects of main manufacturer and parts supplier can be checked. This study, through the case study for HSR cost structure in introduction and operational stage of KTX, aims to seek for the method to adapt to environmental changes like EU railway industry of which object is to acquire global market competitiveness by integrating manufacturing and operation of RS and the regulation and operation of IRIS which is performed in Europe.

LCC can be defined as "the sum of present values of investment costs, capital costs, installation costs, energy costs, operating costs, maintenance costs, and disposal costs over the life-time of the project, product, or measure." LCCA involves estimating the costs and timing associated with each alternative over a selected analysis period and conversion of those costs to economically comparable values considering the time-value of money. The several Excel-Based LCC tools found on the internet are described in this paper. Also, This paper performed an analysis of the existing LCC commercial tools, assessing various aspects of each program. The goal was to evaluate the best features of each tool and to identify the requirements for LCC evaluation of Urban Transit Vehicle. The LCC tools are developed to address problems in many different areas and a tool developed and structured for one area cannot generally be used in another area. No general LCC tool exists and if one is needed for Urban Transit Vehicle it has to be developed by the project. Since a full LCC can be very complex it is likely that this Excel-Based LCC tool should be a small and simple tool for quick cost estimates. This paper presents a LCC tool consisting of eight excel sheets, which are "Project", "CBS", "PBS", "PM", "CM", "Others", "LCC Result" and "Diagram".

At present, KORAIL is in the middle of renovating. All steps exert great effort at cost reduction and a profit improvement. Especially to improve maintenance method and inspection period at the rolling-stock division lots of research is under progress. Daily inspection of rolling stocks is to operate the rolling stock normally. Daily inspection items are driving control device, coupling device, brake system, water system and air conditioning system, electrical system etc. Half of the maintenance manpower are inputted at daily inspection. Strengthens the quality and optimize the proportion of daily inspection are urgent problem. Daily inspection period extension aim is as follows. KTX from 3,500km to 5,000km, passenger car from 1st to 3,500km, new style electric locomotive from 2nd to 5,000km, the diesel locomotive is 2,800km from 1,200km. In this paper, the optimal daily inspection period and methods are considered including expected problem and counter measures.

This paper presents an activation plan for reliability centered maintenance (RCM) of rolling stock. The KTX is carrying out the maintenance in compliance with RCM. MKBSF, that is one of the reliability indices for KTX, is shown 183,483 km in 2009, whereas it is shown 68,986 km in 2004. It means that the reliability of KTX has been growing every year. It also is result of reliability management activities. KORAIL did not apply RCM until now about the conventional rolling stocks. But KORAIL decided that applies RCM system because of reliability management effect of KTX. In this study, we tried to know an activation plan for the reliability centered maintenance of the conventional rolling stocks.

Automatic train control systems are divided into ATC, ATP and ATS systems etc. The ATP and ATS systems offer discontinuous information for train control. While the ATC systems provide continueous information for train control. There is a method for offering continuous information by AF track circuits. Magnetic fields are formed by current through rails in the AF track circuit systems. So, the continuous information is received by the magnetic fields on a on-board antenna. Coating materials on rails are researched to decrease defects such as head check, shelling, corrugation, squats and so on in Germany. Currently, a coating method of rail construction is proposed by using the ceramics in Korea. When deciding physical characteristic of ceramics, researches are required about variation of flux density by the ceramics. In case that the flux density is much lower than existing value, the information for train control is not transmitted to the on-board antenna. In this paper, inductance on rails is calculated and a model is presented about variation of the magnetic field intensity in the AF track circuit. Standard permeability of ceramics is proposed by analyzing the variation of magnetic field intensity. It is demonstrated by using Maxwell and Matlab program.

The terms of track is a train-only line for a train service, in premises of station of a station, that the unit over the track for turnout the track from one track to another track, which it changes the course from the main track that is used for operating a train to the side track, is called a turnout The stick strength of tongue rail is adjusting uniform pressure on the both sides, the adhesion strength between a basic rail and tongue rail has to maintain over 100kg of power value to open over 1mm the ends. This study suggested developing a measuring instrument that can measure a basic rail and the stick strength of a movable rail in according with a switch, such as a switch point, and a performance test. This study ties to be helped that it improves measuring usability for the maintainers through improving quality in a stick measuring instrument, that it solves a technique in the site difficulties through improving a measuring instrument, with reducing the obstacles and expenses.

Related to the on-going "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train", activities by each phase shall be conducted to achieve SIL4 level and obtain safety certification from the Independent Safety Assessment(ISA), based on the IEC standards((IEC 62278/62279 and IEC 62425) for the first time in Korea. This thesis describes the introduction of IEC standards, system assurance activities (such as plan, analysis, test, verification and validation) in compliance with requirements management and project life-cycle and relations with the safety assessment activities; and certification activities (such as document reviews and audits) through system RAMS activities, software quality assurance activities and safety assessment, for the purpose of achieving a successful safety certification at the time of completing the project as system assurance activities including software and safety certification activities in order to acquire the safety certification for train control system which does not exist at all in domestic cases. It is believed that overall system safety assurance activities in this project will contribute to develop more upgraded products of the domestic train control system on the quality and safety point of view, find overseas markets and establish a bridgehead in the future.

CBTC(Communication-Based Train Control) system which is based on wireless communication can provide high density operation of the train using location tracking between ground and onboard train. It can also reduces maintenance expense because it does not require the ground equipment for tracking circuit and signal flag and so on. Recently, research and interest have been done on CBTC system. The high-speed trains up to 300km/h experience multi-path fading channel which bring about the performance degradation of wireless CBTC system. In this paper, we consider MIMO (Multi-Input Multi-Output) antenna-based CBTC system for trains with Alamoutip-type space-time diversity transmission for reliable communication. Also we model a channel considering practical environment and evaluate performance improvement of proposed CBTC system.

This paper describes the calculation and application of the speed profile for the train speed control when the train is operated by ATO(Automatic Train Operation). We propose a speed profile calculation method considering the speed limitation and the jerk limitation, in order to maintain the quality of the train automatic operation. In previous works, ATO calculates a desired speed profile along the time, and controls the train to follow the profile. In this case, it may be hard to follow the restrictive speed along the location or to stop the train with a low location error, because of the difference between the desired location at each time and the real location of the train due to the control error. In the proposed method in this paper, we calculate a desired speed profile along the time considering the speed and jerk limitation first, and derive a speed profile along the location using it. If the restrictive speed profile is changed or the train speed strayed from the speed profile, ATO system calculates new speed profile and applies it immediately. Because ATO system controls the train speed based on the train location, the accuracy of the train location control can be improved. A simulation system for the test of the automatic train operation using this method is designed.

Jeong-Ji overbridge is designed to be 9.3km long, the longest for a high speed railway bridge ever constructed in Korea. This bridge is constituted of three types of structure. Standard type bridge is 35m PSC Box bridge which will be constructed by Precast Span Method. To cross the Cheonan Nonsan Expressway, 80m three-span steel arch bridge is designed to avoid rail expansion joint. Finally, Extradosed bridge is planned for high speed railway bridge for the first time in Korea based on originative and advanced design techniques. It is expected that this will contribute to the development of national technology for long-span high speed railway bridges.

It has been recognized for decades that the spherical bearing which is sliding on curved surface in the intrinsic behavior is optimized for the railway bridge requiring a large slope deflection. However, the spherical bearing is easily corrosived at the PSC girder bridge which is exposed to the outside so the normal function of bridge bearing is not fulfilled fully. It is common that the corrosion is happened at the operating plate of steel bridge bearing and generally it is necessary to replace the bridge bearing after 20~25 years. Accordingly, It costs multi billion dollars for maintenance each year and the necessity of improvement become a issue. Korea Rail Network Authority(KR) suggested to apply the Elastomeric bearing instead of Spherical bearing through the task of construction site of 2006. But the normal Elastomeric bearing is optimized for the Highway bridge so it needs the special consideration to satisfy each design condition required by railway bridge. As the result of examination of Elastomeric bearing at the railway bridge construction site, the stress is decreased by effective dispersion of earthquakes and the maintenance fee is also decreased.

The safety of tilting train running on curved track is, in general, evaluated with a derailment coefficient calculated by the ratio of wheel load and lateral force, Particularly on curve, the wheel load and lateral force on rail may cause trackbed to be deformed, depending on their intensity, and moreover, often result in critical accident such as derailment. This study hence was intended to identify the cause of wheel load and lateral force so as to suggest the allowable wheel load reduction rate, lateral force limit and derailment coefficient, thereby quantitatively evaluating the operational safety of tilting train. This study therefore was aimed to analyze the wheel load and lateral force occurred during tilting train's operation on circular curve in such a way of comparing with traditional trains, by axle and speed, in a bid to eventually evaluate the operational safety of tilting train.

An ultimate strength evaluation of the through plate girder bridge using nonlinear inelastic analysis is presented. In this method, separate member capacity checks after analysis are not required, because the stability and strength of the structural system and its component members can be rigorously treated in analysis. The method captures the inelastic redistribution of internal forces throughout a structural system, and allows an economic use of material for highly indeterminate steel bridges.

In the areas susceptible to vibration and noise induced by railway traffic such as downtown area and stations under railway lines, the vibration and the structure-borne noise can be solved by floating slab track system separating the entire track structure from its sub-structure using anti-vibration mat or springs. In other countries, the core technologies for vibration-proof design and vibration isolator - one of key components - have been developed and many installation experiences have been accumulated. However, in Korea, since the design technology of system and components are not yet developed, the foreign systems are being introduced without any adjustment. Thus, in this study, the vibration isolator has been developed and its performance are investigated by the dynamic analysis of a station structure under railways lines and the floating slab track system. For this purpose, the loads transferred from the vibration isolator of the floating slab track were evaluated by train running simulation considering vehicle-track interaction, and then the dynamic analysis of station structure subjected to these loads was performed. The dynamic analysis results show that the proposed floating slab track can reduce the vibration of structure by about 25dB compared with that in conventional ballast track without floating system.

This paper aims to find out the statistical characteristics of the railroad accidents by weather phenomena. For this, It is investigated occurrence frequency of railroad accidents and operation obstacles from 1996 to 2008 in Korea using the KROIS data and Korea railroad accidents reports. The results are as follows; The occurrence frequency of railroad accidents and operation obstacles decrease gradually, and most of railroad accidents is a railroad traffic accidents. The amount of damages by a railroad weather-related accidents is higher than the one of the railroad accidents and operation obstacles. Weather events which is influenced the railroad weather-related accidents and incidents are rainfall, snowfall, lightning, strong winds. And they have occurred a railroad weather-related accidents and incidents, such as rail obstruction, signal failure, and power supply failure.

Operation of KORAIL's level crossing is in charge of KORAIL. As taking over existing level crossing to KORAIL, they do not conduct risk assessments, so we do not know about any possibilities of inner risk. And present operation of safety of the level crossing is just regular checking of reaction and functions of safety equipments physically, we need to react to the changes of what's going on around of level crossing and incestigation of traffic flow and surrounding conditions more spontaneously. So, we have to prepare the strategies against accidents of level crossing cost-effectively based on regular risk assessments for sustainable safety improvements and overcome operational problems of present level crossing's safety. Here, we're going to investigate the level of safety level and present risk factors of the level crossing using risk assessments for accidents/error of the equipments to show operational strategies of level crossing based on risk assessments.

국내의 철도운영과 관련된 안전법령은 크게 철도안전법과 산업안전보건법으로 구분할 수 있다. 기존의 철도운영기관은 공사형태의 공공기관으로 철도차량 및 철도시설물에 대한 유지보수를 직영 직원 중심으로 하고 있었으나, 코레일공항철도(주) 등 민간철도운영기관의 출현으로 경영합리화를 목적으로 철도차량 및 철도시설물 유지보수를 외주에 의해 운영되고 있다. 그러나 동일한 안전관리시스템으로 적용하기에 운영상에 문제점이 있어, 그 문제점들을 도출해 보고 특히, 파견근로자 보호에 관한 법률에 의거 도급용역과 파견근로의 차이를 인식하고, 안전관리측면에서 어떻게 접근하는 것이 최적인가를 모색하였다. 철도종사자들의 안전의식을 설문을 통해 비교 분석하여, 현 안전관리 측면의 실태를 파악하고, 그 개선안을 제시하고자 하였다. 특히 설문을 통해 직영 직원과 외주업체 직원들 사이, 그리고 관리직과 일반직원들 사이의 안전의식의 수준차이를 밝히고, 외주업체의 안전관리 향상 방안을 위한 방안을 제시하였다. 또한, AHP(Analytic Hierarchy Process) 기법을 활용하여 안전관리시스템의 기본골격인 P-D-C-A(Plan-Do-Check-Act) 사이클 중에서 가장 중요한 요소가 무엇인지를 파악을 통해 안전관리 개선방안을 제시하고자 하였다.

CEN/TS 45545 is Europe consolidation standard for fire safety on railway behicles. This is based on the International Union of Railways(UIC) and different European countries. It is intended to protect passengers and staff in railway in the event of a fire on board. It will be prepared in 2012. Based on this consolidate standard, they are going to make single market, for raising technical competitiveness, technical innovation and globalization of that standard. For this reason, European academies, manufacturers, and sub-manufacturers confer and stady animated about CEN/TS 45545. In Korea, get out the safety assessment for ues incombustible interior material, the needs of quantitative analysis on fire protection, demand on recognition of fire protection scenario, and define about fire load analysis are becomin more and more important. Therefore, this paper will estimate and compare Flammability, Smoke Density, Toxicity Index( this is the key point for appraised fire safety performance of material) between CEN/TS45545 and fire standards on railway vehicle. Then suggest criteria for fire safety on railway vehicles.

This paper introduced the appearance characteristics of the cab mask & telescopic handrail arms for the New Zealand EMU to be applied with inter-city transportation in 2010. The appearance characteristics are improvements of driver's sightline, implementation of safety zone of gangway plate by using the telescopic handrail arms, improvements of staff & female crew & ground crew's convenience. and also, during have looking the New Zealand EMU(Electric Multiple Unit), I hope that people who having the interesting of the cab mask design would be gotten help with basic knowledge.

Since PSD(Platform Screen Door) is set up at many subway stations, its design related to a safety becomes gradually important. Especially the intereference check with a running railway vehicle is the most important of performance indices. This study proposes a dynamic analysis models for the railway vehicle and rail. Some design parameters are considered in the models to find a correlation to the performance.

This study examined the overall measurement system for the power dispersed high speed railway with 400km/h of maximum test speed. The measuring system evaluating an efficiency, stability and reliability is important for developing the high speed railway. In order to organize the comprehensive measuring system, it is needed to determined the test item, a number of channel and the specifications of the measurement system. In this study, we made lists for the performance evaluation tests of the next generation high speed railway expected to be developed in the future, and prepared generalization channel sheets for the specification of the overall measurement system. In addition, the specifications for the measuring system were discussed and synthesized.

The Urban Transit Standardization Program has been supported by the Ministry of Land, Transport and Maritime Affairs. The Program consists of dozen or more projects and thus is quite complex, which implies that the program success heavily depends upon the effective management of various artifacts during the development. Particularly, in the complex systems development, developing and managing requirements is very important throughout the whole system life cycle. The requirements can be the basis of the design changes to be made later as well as the test and evaluation to be performed in the subsequent stages of the systems development. As such, the derivation of the system's requirement based on the needs from the customers, or stakeholder in a broad sense must be done properly. In particular, notice that the system is being developed but the system requirements are not fully available for some reasons. To complement this situation is the purpose of the study. To derive proper requirements effectively in the process of development, this paper proposes to draw up scenario using the output of the system under development and to utilize the use case diagrams and operational scenarios.

The Railroad Safety Technology R&D Program has been supported by the Ministry of Land, Transport and Maritime Affairs. The Program consists of dozen or more projects and thus is quite complex, which requires effective project management. This paper is discussing how to effectively manage the railroad safety technology R&D program based on systems engineering management plan (SEMP). The key issues dealt in this paper include the SE management, requirements management, verification and validation, integrated data base management, and traceability management. To achieve the goal, we first defined an appropriate SE process to be adopted in the program and the result was documented in the systems engineering management plan. According to the process defined, we set up the environmental frame in database. Using the database and SEMP, each project of the program was verified with respect to the corresponding requirements utilizing the traceability. All these efforts were carried out using a computer-aided SE tool, which enables efficient management of complex database.

In this paper, we investigate the development process of the quality assurance system ISO9001 in the railway industry and ISO/TS 16949 the quality system in the automotive industry. We study the international standard IRIS(International Railway Industry Standard) & TSI(Technical Specification for Interoperability) applied in railway industry. Throughout studying for the whole development process of the Rolling Stock Quality System, we are to review the necessity of the monitoring process and assesment process applied in IRIS & TSI guidelines. It will be the keystone enhancing our quality level to global level in railway industry.

Korean Train Express (KTX) has been commercially operating and achieving elevation on transport capacity since 2004. And the first hish-speed prototype test train, HSR-350x, was developed and succeeded in testing of running over 350km/h. Now KTX-II based on HSR-350x was started in service run. The new high-speed train development project, HEMU-400x project, has started since 2007. The protype train is being designed and manufactured. After the train are developed completely, it will run on the commercial line and will be test to verify the estimated performance. The authors devised the performance evaluation method and process of the HEMU-400x prototype system. And we introduce the definite performance test items and the method to vitrificate them in this paper.

In this study we suggest a method of optimization of verification hierarchy structure and system requirements management by using a verification matrix with traceability consideration. Verification items were gathered in the process of CDR(Critical Design Review), and analyzed with respect to requirements traceability structure. Missed or overlapped items were adjusted, and cross-correlated items between sub-systems were clustered and rearranged in order to structurize verification requrements (VRs). Those VRs are to be used as a guideline for the test and evaluation planning, development of test items and procedure, and system requirements management throughout the system integration stages.

In order to prepare for the commercialization of Korean tilting train, this study was made on the pre-analysis of risk factors that can happen during operation, and emergency measures for safe operation of tilting train. The purpose of the study of emergency measures is to help to make tilting train run safely by making counteraction procedures for unusual situations such as train breakdown or accidents during the operation of a tilting train so that the engineer can quickly take care of each situation. Based on the items of emergency measures for EMU operated by Korean Railroad(or Korail), possible breakdown items during operation were selected and prioritized considering the occurring frequency and emergency level of each breakdown. In addition to these items, by adding items to represent tilting train's typicalfunctions such as tilting function error, tilting storage battery's electric pressure drop, etc, a total of62 emergency items were finally selected and measures for each item was made.

The rolling stock have to be tested and evaluated on test line before entry into service. The test items consist of traction performance, braking performance and current collection performance, etc. This paper is a study of defining the test items considering the domestic safety law, IEC 61133 and describes how to establish a test measurement system. Also this paper presents how to conduct the traction performance test and test results.

Electric railway system consist of rolling stock, track, signal and streetcar line system. ATP(Automatic Train Protection) system in railway signaling system is the important one grasping the position and velocity of a train. The wayside transmitter of ATP system is installed between rails. Recently, the research about increasing train speed has been developed in total departments of the railroad systems. The study on the information transmission between on-board transmitter and wayside transmitter is required for increasing the train speed in the ATP system. When the train speed is increased as to same transmissi on distance, the problem on information transmission occurs because the transmission time is decreased. In case that the transmission distance is extended, the transmission time is decreased with respect to the train speed. Therefore, we have to define the standard magnetic intensity as to the train speed in order to transmit correctly telegram. In this paper, the transmission distance for the telegram is suggested on the basis of the train speed. Also, the standard magnetic intensity from the wayside transmitter to on-board transmitter is proposed by using transmission distance regarding the train speed in the ERTMS/ETCS system by using Matlab program.

Energy Storage System(ESS) is installed at feeding line of railway substation. ESS will absorb regenerative energy when train braking and also charge electric energy when feeding line is no load condition. Absorbed and charged energy will be supplied when train is accelerating condition. Due to ESS the energy variation will be minimized and this effect is estimated.

Electric vehicles have reached a new level of development with introductions by Chrysler, Ford, Honda and Toyota. Today's charging technology includes conductive and inductive charging systems. There are three standardized charging levels: Level 1: charging can be done from a standard, grounded AC 120V, 3-prong outlet available in all homes; Level 2: charging is at AC 240V, 40 amp charging station with special consumer features to make it easy and convenient to plug in and charge EVs at home or at an EV charging station; Level 3: a high-powered charging "fast charge" technology currently under development that will provide a charge in less than 15 minutes. The incoming AC power is converted to DC and stored in the vehicle's batteries. In this paper, we investigated the application of urban railway DC electric power for electric car charging system.

This paper described the positioning algorithm of partial discharge in insulation oil by acoustic method for the application of an on-line diagnosis in oil-immersed transformers. In the experiment, five AE sensors having the resonant frequency of 150 kHz were used, and a signal conditioner was fabricated. A needle-plane electrode system which is composed of a needle with a curvature radius of $10{\mu}m$ and a plane electrode with a diameter of 60 mm was installed to simulate partial discharges in insulation oil. From the time difference of arrival (TOA) of acoustic signal, we calculated the location of partial discharge in insulation oil. In the experiment, an algorithm of positioning of PD occurrence by the time difference of arrival was proposed. From the experimental results, the positioning error of PD calculated by three AE sensors was within 4%.

The LED illuminator has merits that it has low power consumption, long life and emits low Co2 gas. As it has many merits in comparison with existing illuminator it is a realistic alternative. but its possession in illuminator market shows slow increasement unexpectedly. Because its price is very high only low power consumption can not keep pace with economical efficiency. In this paper I analyzed economical efficiency about LED illuminator when it is applied at subway station.

In the high-speed EMU, the modularized traction converter produces the significant harmonic currents caused from the switching behavior of a power converter. These harmonic currents bring the interference among the traction equipment. One way to minimize the interference is to design the secondary windings of a power transformer decoupled magnetically as possible. This paper presents a magnetic field analysis on a winding disposition to clarify an impact on magnetic decoupling between secondary windings, under a limited height of a train. Two winding dispositions for a single-phase shell-type transformer are constructed and simulated by a three-dimensional finite elements method (FEM) model. Two different winding dispositions are constructed and simulated by three-dimensional FEM model using Maxwell3D.

Currently in Korea, neutral sections in front of substations and sectioning posts are greatly divided into AC/DC sections and AC/AC sections. Considering catenary damage and safety issues trains pass crossover by coasting driving at notch-off. However in cases of Japan, China, or Taiwan, the usage of automatic crossover system makes it possible to pass at notch-on, enhancing high-speed railway operation for efficiency, and stability. These are the purposes of developing automatic power crossover system in neutral sections. This paper introduces two methods to detect the position of a train required to activate automatic crossover systems in neutral sections. The optimal method is expected in terms of the distance of neutral section.

Recently metropolitan local governments is actively introducing urban railway's expand and light rail transit as a means of new transport system. DC electricity feeder system operating in the domestic urban railway is typically a feedback circuit consisted of the contact wire and electric railway vehicle via rail. But stray current is to be defined as a current flowing on a structure that is not part of the intended electrical circuit with respect to a given structure. Stray current is generally results from the leakage of return currents from large DC traction systems that are grounded or have a bad earth-insulated return path. At the place where the current leaves the rail and metallic structures, electrolytic corrosion may take place. This paper presents comparison analysis of field test methods based on criteria of electrolytic corrosion protection of buried metallic structures adjacent to DC traction systems.

In three-phase power, when the power is supplied to the single phase load, there is the unbalance of load in the three-phase power. So the scott transformer is used in the power system to supply a single phase load in three-phase power without the unbalance of loads. Especially, the scott transformer is used in the AC substation of electric railroad. Two single phase transformers are combined by T-wiring in the scott transformer. So, two single phase voltage is provided by differing $90^{\circ}$ phase in three-phase power. The selection of related equipment and correction of protective relay are not easy from characteristic of the scott transformer when shunt and ground faults occur. PSIM(Power Electronics Simulator) is optimal simulation software in field of the power electronics and provide the simple and convenient user interface. In this paper, electric model of the scott transformer is suggested and the current of the scott transformer in shunt and ground faults is analyzed. Also, the scott transformer model is demonstrated by using PSIM.

The hold clamp which is for holding feeder distribution line in direct current can be lengthened its span of life by inserting insulators(EDPM rubber) through improving its function such as preventing damage from temperature change and electric corrosion. This paper reviews the development background, design, manufacture and performance assessment of the hold clamp inserting insulators to prevent circulating current.

LRT projects pursue fully automated manless operating system with an aim to achieve a minimum availability of 99%. System performance is required to be guaranteed by verified SE procedures to meet user requirements for maintaining system availability above 99%. Configuration Management is one of the most practical SE application methods that manage various changes that may have a major influence on system performance on the process of undertaking assigned projects and find out problems in the system through future tracking systems. This paper discusses further use of Configuration Management in the areas concerned after examining the cases that apply Configuration Management, one of SE application methods, to the ongoing local LRT projects.

Fiber Reinforced Plastic (FRP) insulators for direct current (DC) were developed and their electrical characteristics were investigated. Electrical tests were carried out to measure withstanding and flashover voltages under common use frequency condition. Tensile and bending tests were performed for the mechanical characteristics. The test results showed that DC FRP insulators had superior voltage resistances and strengths to porcelain insulators.

In electic railway, 25kV is applied to AC sections of overhead contact lines and pantographs of Korea Train eXpress(KTX) make contact at speeds of 300km/h. Thus, there is a need to utilize wireless, optic, contact-less sensors to implement condition monitoring systems. This paper is based on describing and analyzing the condition monitoring system implementation technologies for efficient catenary current ratio characteristic assessment. The conclusion of this paper should be widely applied to design, diagnosis, completion of construction, current collection status, fault diagnosis, and selection of contact wires and suspension wires.

In long tunnel If we reduce the length of system height on catenary system, tunnel construction cost is cut down. It is because of tunnel section curtailment. So that we have review reduction of system height according to tunnel section. We have designed reduction of system height considered characteristics of overhead contact systems within UIC 799 code.

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

Vehicle dynamic behavior should be investigated to establish the track irregularity criteria because they have an impact on vehicle dynamic behavior. The tilting train which have been developed in Korea will be operated on the conventional line. Therefore, it should be checked that the track irregularity criteria of conventional line is still available for the new vehicle. In this paper, the influence of vertical alignment on running behavior and safety for tilting train was instigated by numerical analysis. The wavelength and amplitude of vertical alignment were considered in scenario of this numerical analysis. This research is based on just numerical analysis and the final result which include measurement will be published in the future.

Superimposition of horizontal and vertical curves may hamper the ride comfort and the running stability of train and largely affect the maintenance cost. However, in many cases, it's not easy to make a track plan because of the fixed points (bridge, tunnel, turnout, catenary system, etc.) to be avoided due to the geographic conditions or to be passed for utilization of existing structures. In this study, when the horizontal and vertical curves are superimposed, in order to optimize the horizontal curve in aspect of the ride comfort, the object function $P_{CT}$ was developed and verified by vehicle dynamic analysis. Also, the solution algorithm for simplified evaluation method was presented.

Study of Lunar exploration is progressed and manned lunar exploration is planned. In order to explore in Lunar, we need habitat to stay for a long time and system that mine, classify and transport materials. Lunar has dust that is very light-tiny. That is on the air for a long time so there are problems to adject transportation system such as vehicle. However, it can solve the problem to use pipe transportation system. This transportation system help materials move continually and is more effective than other transportation system such as train or vehicle. For those positive points, some experts studied about tube transportation systems. I introduce these system and find out factors that can be used in Lunar regolith transportation system. I suggest Lunar regolith transportation system, using the factors.

Space Elevator introduced in the science fiction titled "The Fountatins of Paradise" by Arthur C. Clarke in 1979 could be attainable for the transportation of human and distribution from earth to space. Space Elevator could reduce shipping expenses and risks of the transportation system. Developing Space Elevator has to need rail technologies for the train and the rail using Carbon nanotube cable, installation of rail appropriated for Earth-orbiting. For this reason, rail technologies for developing Space Elevator will be suggested by this study through the case study.

최근 건설시장 규모가 확대되고 교통산업이 발전하면서 지하철 및 터널 등과 같은 개착형 Box 혹은 Shield형 터널 구조물 등 지하구조물의 건설이 다양화되고, 그 수요도 점차 급증하고 있는 실정이다. 그러나 주로 지하에 건설되는 콘크리트 구조물은 시공시 신축이음 및 시공 조인트 등과 같은 다양한 형태의 조인트 발생과 구조물의 수축팽창에 따른 거동, 부동침하, 과다하중, 진동발생에 의한 균열로 인하여 누수가 발생되고 있다. 이에 다양한 방수공법 및 재료들이 현장에 적용되고는 있지만 지하철도, 지하철 등과 같은 진동 및 구조물의 거동이 상시적으로 발생되는 환경조건에서는 방수층의 성능이 저하되어 균열, 침식, 들뜸 등으로 물이 확산되어 재누수가 되는 악순환을 겪고 있는 실정이다. 따라서 본 연구에서는 진동 및 구조물의 거동에 대응 가능한 점착 유연형 복합방수공법을 대상으로 구조물의 거동 대응성 시험을 평가하고, 거동 및 진동이 상시적으로 발생되는 지하철, 터널 등을 대상으로 실제 현장에 적용 후 사례를 통해 구조물 거동에 대응 가능한 방수기술을 검토하였다. 이러한 거동 대응 특성을 검토한 결과 방수재가 기건 및 수중환경에서도 재료의 유연성과 부착성을 유지하여 물의 침투를 방지하고, 거동폭 $5.0mm({\pm}0.5)$ 범위에서도 거동에 대응 가능함을 알 수 있었다.

This paper is how to improve contaminated air by the pollutant from vehicles through ventilators and entrance at the underground station. We are looking for the environment management to take care of customers. There is two ventilation systems. One is natural ventilation system, the other is forced ventilation system. Usually, subway ventilators were installed low on the sidewalk. There are lots of craps on the ventilators, so these things interrupt influx of outside air. But the gas from the vehicles comes into the station through entrance. There is lots of noise while ventilations run. So we install the supply air vents away from the road for the customers. If it's difficult, we cover around the ventilator with clear plastic plates more than 2M heights. We also install silencer on the ventilators. We install the air curtains on the entrances to prevent dust from outside. Seoul Metropolitan has a plan to make 60M deep underground road. To improve underground road air quality, ventilators should be installed that consider the above information.

In this study, the patent trends for noise barrier and noise reducing device have been analyzed, for the development of adaptive noise barrier according to the transmission characteristics of railway noise. Using patent search engine, keyword searching for patents after 1980 in Korea was performed. The first 667 patents details were reviewed for the extraction core(ie, key) patents. From this review, finally 70 patents were built as DB. From this analysis of core patents, system requirements for development of noise reducing device were obtained.

서울지하철 1~4호선 구간에서 부분적으로 도시터널공법을 채택하여 건설한 노선은 2~4호선으로서, 2호선 구간은 2기 지하철 건설시 시공된 신정기지 인입선 도림천~까치산역 구간 터널을 제외하고는 전체가 재래식 공법(ASSM)을 3~4호선 터널은 지형적인 여건 및 토압의 영향에 따라서 ASSM공법과 NATM공법을 병행하여 건설하였으며, 지하수 처리 형식은 지반조건과 지형적인 조건, 지하수위 저하에 의한 영향, 장기적인 운전 유지비 등을 감안하여 배수 및 비배수 형식을 적용하여야 하나, 이에 대한 충분한 사전검토 없이 채택하므로서 완전방수(비배수) 형식은 건설시에도 시공성이 떨어지고 기술적으로도 불합리한 요소를 지닌 채 설치되었으며, 부분방수(배수)형식은 배수관 기능저하, 배수구배 부적정 등으로 인해서 터널 구조물의 유지관리에서 누수와 수압에 의한 라이닝 콘크리트 균열, 박리 현상이 지속적으로 발생하여 보수 및 보강공사에 많은 비용이 소요되고 또한 터널 안정성 확보에 어려움이 있는 실정이다. 그러므로 터널 방수 형식에 대한 설계 및 시공 개념을 고찰함으로서 기술적인 문제점 등을 파악해서 유지관리의 개선 방향을 제안하고자 한다.

The concrete track system on domestic urban transit has being constructed since 1974. Because a maintenance and repair of concrete track system is convenient, a construction is increased. The concrete track system on domestic urban transit is constructed 71.8% of total track system length and constructed variously, for example STEDEF, LVT, ALT and so on. Recently, railway noise is issued as environment problem. The method for mitigation of urban transit noise is required. In this study to study noise characteristics on concrete tracks we measured noise by concrete track types and analysis the result.

Generally, railroad soil around turnout was caused by leakage of lubricant oils during its maintenance. So, TPH concentration in soil was much higher than standard in Soil Envirnment Law. In additiont, railroad site was still difficult to assess due to railcar operation. This research was conducted to investigate the effect on electrolyte concentration during the Electrokinetic-Fenton process for contaminated soil around railroad turnout. As a result, experimental result shows that TPH removal in soil and amount of EOF were changed depending on electrolyte concentration. In future, the removal efficiency can be enhanced to optimize concentration in EK-Fenton Process.

The objective of this study is the developement monitoring measurement using global positioning digital datalogger system for monitoring measurement of railway construction sites. For the replacement of current passive data communication, Global positioning digital datalogger system using active communication is studied for the first time with in a country. Therefore data communication method and analyzing program of automatic measurement data is developed for the global positioning automatic digital datalogger system. The results of this study will be using real time automatic monitoring measurement of railway structures.

철도 승강장의 매점은 현재 신문판매대, 표준 간이매점, 간이매점(복권방)등의 형태로 운영되고 있다. 따라서 신문이나 잡지등은 쉽게 불에 붙기 때문에 화재의 발화원이 되며, 대구 지하철 화재사고와 마찬가지로 방화의 대상이 될 수 있다. 따라서 지하철 승강장 매점화재 방지를 위하여 매점화재 시뮬레이션 기법 정립이 필요하고 이를 통한 화재방재예측능력이 필요하다. 이에 본 연구에서는 매점화재 시뮬레이션을 수행하였고 수행된 해석결과는 매점지하철 승강장 매점화재 실험결과와 비교 고찰을 통하여 해석의 신뢰도를 검토하였다.

This paper aims to find out characteristics of railroad weather-related accidents and incidents and to proposes the plan of railroad disaster prevention according to the precipitation. For this, we make the database about the railroad weather-related accidents and incidents and analysis the relationship between the hourly and cumulative precipitation and railroad accidents. The results are as follows; The weather events that have the most occurrence frequency of railroad weather-related accidents and incidents is a rainfall of the precipitation and then the cause of that was the falling rocks and the collapsed roadbed. The rainfall patterns of collapsed roadbed were classified into 4 groups. When the variation of hourly rainfall is 10/15 mm/hr over, we need to consider the caution/stop of train operation and a speed limit, respectively.

국외에서는 대형시스템을 사용하는 항공, 해양, 원자력, 철도 등에서 발생하는 사고 중 인적오류가 포함된 사고에 대한 분석 및 연구가 활발히 진행되고 있다. 우리나라에서는 영국, 미국 등의 철도선진국과 비교하여 인적오류를 고려한 철도시스템의 체계적인 운영이 미흡하며, 관련 기준을 별도로 규명하지 않고 있는 실정이다. 또한, 사고 분석을 위한 방법이나 절차, 인적오류와 관련된 원인요소에 대한 항목이 제한적이어서 사고분석이 어려운 실정이다. 이에 본 연구에서는 철도사고구분에 따른 위험사건들을 체계화하여 기관사, 사령, 역무원을 포함한 철도안전업무종사자의 수행도에 영향을 끼칠 수 있는 인적오류원인들을 국내외 연구결과를 바탕으로 체계화하고, 국내 철도 사고 사례를 통해 적합한 인적오류원인을 도출할 수 있는 분류방안을 마련한다.

Korea have 3 kinds of national railway safety target, which are accident fatalities, train accident rate, and passenger fatality per passenger kilometer. Increase of railway passenger and train operator force to setting up new safety target. Current safety target can not reflect train operator's safety activities because it include suicide and trespass related accident, which are hard to control by the operators. In order to reflect to the 2nd National Integrated Railway Safety Plan, new safety targets are roposed in this study.

As a mass transportation system, a railway contains potential risks that may result in a high death rate and property losses. Accordingly, Railroad Safety Technology R&D Corps. is adopting the plan of the construction of Railway Safety Test Facilities as a part of the Railway Total Safety Project to enhance the railway safety, and carrying out researches on effective project management methods with Systems Engineering techniques. When a system or a service is realized, such as the Railway Total Safety Project, it needs to be verified by requirements and the process of verification is to check whether customers/stakeholders requirements have been properly transformed into a system or a service. Recently, building the standardized verification system up could be the solution to reduce possible system-failed risks. To support that, we propose the more effectual verification method of constructing the Railway Safety Test Facilities applying the systems engineering tool to the research.

Railway system which has latent loss of lives and property by big accident with that human error such as locomotive driver, manager, signaller, and the others involved. So human error management is needed to control this complex system and to confirm safety of it. Rail human error research for managing human resource has grown rapidly in both quantity and quality of output over the past few years. The continual influences of safety concerns, new technical system opportunities, reorganization of the business, needs to increase effective, reliable and safe use of capacity, and increased society, media and government interest have now accelerated rail human factors research programmes in several countries. The objective of this research is to improve safety and to reduce accidents in korean railway system, through the application of research results to the investigation of requirement for human error.

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents as fire, explosion or leakage of toxic gas at factories in order to not only protect the workers and neighbors but also prevent economic losses and environmental pollution. In addition, HRA may be used to detect the human errors which may cause accidents or trace back to any mistake on the part of workers. Usually, HRA technique is used in association with other risk assessment techniques. Moreover, it can serve to enumerate the human errors which may occur during operation or down-time or correct the existing system to reduce the mistakes. This work focuses on the coincidence of human error and mechanical failure for management of human error, and on some important performance shaping factors to propose a method for improving safety effectively of the process industries.

In December 2006, the Ministry of Environment in Korea established the "Indoor Air Quality Management Guidelines in Public Transportation." As the items of the guideline, $CO_2$(Carbon dioxide) and PM10(Particulate matter). Therefore, the air quality inside the train is supposed to be ruled by this guideline. This study calculated the increase or decrease rate of the $CO_2$ concentration by using the data measured in accordance with flap operation. In case of flap close or open, the calculated $CO_2$ concentration variation was 6.32ppm/min. The $CO_2$ concentration prediction equation was derived from the general equation and the actual measured value are compared with the predicted $CO_2$ concentration suggested during the KyungBu high speed railway construction. The predicted value show good agreement with the measured data.

United Nations Framework Convention on Climate Change(UNFCCC) is one of the international environmental convention with the goal of stabilizing Greenhouse Gas(GHG) concent in the atmosphere and preventing potentially dangerous change in the earth's climate. The purpose of this convention is to reduce fossil fuel consumption and to prevent GHG emission. The Republic of Korea was one of the Annex-II parties submitted its national communication to the UNFCCC. As a developing county, there is no GHG emission reduction commitments made by South Korea during first commitment period(2008~2012). On the contrary, South Korea' status as an OECD member, joining in 1996, ranks 6th in GHG emission. Furthermore the rate of increase of GHG is first among OECD countries in year 2005. As a result, Korea will probably be incorporated into Annex-I in second commitment period (after 2013). So, Korea government established and announced Voluntary GHG Reduction scheme to reduce emissions of 4%(accounting for 30% reduction base on Business As Usual) from the 2005 level by the year 2020 for mitigation of reduction duty impact. In specific case of Korea, transportation section occupied almost 21% of total energy consumption and nearly 17% of total GHG emission at 2005, so systematic emission management is required. To do so, in this research, we focus on systematic way of GHG management system to handle GHG reduction duties in Railroad section.

In this paper, we introduced a sequential intelligent image analysis system(SIIAS). This system is implemented using PTZ camera with intelligent analysis algorithm and TI's Davinci DM6446. Enter, abandon, removal and cross functions are included in our system. These functions can be used individually or in combination for object monitoring and tracking. Sequential intelligent function processing is more efficient than the previous one by virtue of accurate observation, wide area monitoring and low cost.

The broadcasting system for the customer safety and conveniency is one of the important convenience facilities taking charge of customer guidance, emergency situation broadcasts for the people waiting at the platform, waiting lounge and train approaching broadcasts. To maintain this broadcasting facility local management control system(LMC) is needed. LMC observes operation status of the facility components which is set up at station and the observation results are confirmed through out remote management PC installed in the jurisdiction branch office. The staff only observes and confirms the errors of the electrical power source at broadcasting facility components accordingly the real mechanical troubles are detected by on-the-spot survey. this paper deals with existing broadcasting system only acting as a simple observation function and the research of LMC function extension which controls, monitors and tests broadcasting facility.

MMI (Man Machine Interface) is the system that monitors the operating condition of the ATP/ATC/ATS systems and receives defined information from ATP/ATC/ATS systems through the interface with On-board systems. Based on the data from the ATP/ATC/ATS system, MMI can display the information and status of the train to secure safe operation. It is possible for the display mode and quantities of MMI to be improved by the customer's demand, and it can be designed as the same structure of existing devices for the driver. The ERTMS is Regular Safety Standards of high-speed railroad. It is fundamental structure of European Rail Control System which train control, safety and operate facilities. In this paper, I study requirements of ERTMS form which design function each section of MMI and application at ATP/ATC/ATS combined Train Constrol System.

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. In this paper, Suitable to a subway wireless video transmission OFDM receiver is designed. OFDM receiver system has 6dB gaion because uses diversity of space diversity and MRC(Maximum Ratio Combining) diversity. The transmitter system use C&ITechnologies's transmitter board. IF frequency of receiver is 480MHz. OFDM modulation parameter is as follow, The bandwidth is 8MHz, The numuber of carrier if 2,000, The modulation methode is QAM16, The guard interval is 1/32.

In this study, to grasp the stability of train and to identify the track irregularity, the algorithm was proposed. As the track deformation occur due to running train, the dynamic characteristics of train show non-linearity. The representative transfer functions of wheel to car response were calculated from the frequency response functions which were estimated from measured triaxial accelerations. The measured acceleration responses were compared with the estimated responses from filtered acceleration outputs. This result could show the non-linearity of train system at the location of track deformed. The proposed algorithm was verified by matching with the site investigation.

To analyze the effect of temperature on pavement types of dedicated lane, we have performed a temperature monitoring for pavements which were constructed in test track for Bimodal Tram. These pavements classified into four types; natural and artificial lawn, concrete and asphalt. Dedicated lane composed of natural and artificial lawn has a complex structure with concrete slab in contact surface of tires, and with 1m natural or artificial lawn in the middle part of lane. From monitoring results for pavements, dedicated lane with natural lawn shows lower temperature value compared with other dedicated lanes, and it is expected to decrease the heat island effect of conventional road if constructed.

Management of indoor air quality of underground subway station is an important issue. The air handling unit (AHU) installed in the underground subway station is the main facility determining the air quality of station. Especially for removing particulate matters, it is important to operate the appropriate air filter. However, there is no quantitative test method for existing air filter in site. It is rarely known that the collection efficiency of air filter can satisfy the designed criteria or not. In this study, we set the reference method using the mini-volume air sampler inside the AHU to evaluate the collection efficiency of different types of air filters. In addition, we applied the portable instrument based on the light-scattering method to the efficiency test. The method we applied in this study can be used in the evaluation of air filter in site.

Many passengers complain about the air quality of subway stations, mostly due to the dust. Usually, this dust is usually originated from tunnels, passengers, or outdoor air. As for now, the dust from tunnels and passengers is not easy to control, but relatively easy to control that from outdoor air. In this study, the effect of outdoor air on the subway air quality was investigated, and various factors was found to be effective. Based on these results, some strategies for the improvement of air quality in subway stations were suggested in this study.

도시철도 수요는 일반적으로 4단계 모형에 의해서 역별로 추정하는 경우에는 기존의 모형식으로는 한계를 가지고 있다. 기존의 모형은 행정동 기반으로 도시철도의 수요가 추정되기 때문에 도시철도의 공간적인 역세권의 특성을 반영하기 어렵다. 본 연구에서는 서울시 및 수도권의 역사를 대상으로 설문조사를 통하여 역세권의 공간적 범위별 수단선택의 행태를 분석하고, 모형개발을 위한 기초조사를 목적으로 한다. 본 연구에서는 국내 및 국외의 역세권 설정을 검토하고, 사례조사를 통한 역세권의 공간적 범위 연구, 공간적 범위에 따른 수단 선택 분석, 역세권의 사회, 경제지표의 자료를 토대로 역별 수요를 추정하는 방안이다. 이방안은 자료 수집과 분석에 많은 시간과 노력이 소요되므로 본 연구에서 설문조사한 역사를 대상으로 실적치와 모형치를 검증하는 것으로 한다. 본 연구의 추정결과 역세권을 500m,1000m로 구분하여 추정할 경우 역별 수요의 실적치와 모형치가 가장 근사한 결과를 나타내었다.

KORAIL airport railroad is the largest private invested project and also the first private tried rail SOC, but which was acquisited into KORAIL on 30. Nov. 2009. Presently, airport train opened on 23. MAR. 2007 as the first phase(Inchon international airport - Kimpo airport, operation distance 37.6km), the 2nd phase(Kimpo airport - Seoul station, operation distacne 20.4km) is expected at the late this year. In this study, I tried to compare domestic & foreign airport train in the perspective of transfer system and searched for the development agendas.

Successful opening and operating of High Speed Rail in South Korea make the Korean railway industry the world's five great powers. It provides an opportunity to enter overseas rail industry to the related companies actively. Lastly developing countries want to learn about Korea's development experience and apply to there country. Also development cooperation needs are increasing. The State Brand Committee is promoting the 'Hangeul advocacy and globalization' which is expanding technology to the overseas that can be grafted in the Korean railway system as well as contributing to the globalization policies. Korea Railroad Corporation can enhance the national brand and rise of the Name value simultaneously by disseminating of operation technology. It would be a worthy project. In this study, effective support for developing strategic partnerships with the developing countries can build a future of growth. And let me introduce strategic model for overseas business expansion that is combined the railway industry and the Korean.

현재 철도계획에 이용되고 있는 교통수요예측 지역간기종점(OD)자료는 국가교통데이타베이스(KTDB)를 이용하고 있다. KTDB의 자료는 우리나라 지역간 총통행량을 조사한 후 도로, 철도, 항공등으로 배분하는 방법을 이용하고 하고 있다. 그러나 철도의 경우는 철도역이 기존의 존과 일치하지 않거나 1개존에 다수의 철도역이 존재하여 Connector가 연결되지 않아 적용 방법상에 문제점이 있는 것으로 나타났다. 이로 인해 KTDB를 이용한 철도부분의 교통예측은 다른 교통수단에 비해 신뢰성이 크게 떨어지고 있다. 본 연구는 이러한 문제점을 검토 분석하고, 신뢰성을 높이기 위해 집계모형(Aggregate Model) 기법을 활용한 철도의 교통수요예측 방법(직접수요추정 : Direct Demand Estimation)을 제안하였다. 본 연구에서는 집계모형에 지역간의 인구, 거리, 산업체종사자수, 자동차대수, 도로연장등 사회경제지표의 연관성을 분석하여 철도분야 수요예측의 오차를 최소화할 수 있는 방법을 연구하였다.

RAMS is becoming increasingly important in the decision making process for the rolling stock projects in order to improve competitiveness by reducing system life cycle cost while improving reliability, availability, maintainability and safety. In order to apply and manage RAMS of rolling stock systems effectively in the operator perspective, it is essential to integrate and control RAMS systematically from the early stage of rolling stock projects. RAMS management is to implement a RAMS system into rolling stock projects in terms of a rolling stock operator, which presents the strategic directions of RAMS policy, objectives, requirements, control, analysis, measurement and improvement throughout life cycle of rolling stock projects. This article presents a new framework of RAMS management that provides an effective and efficient way for managing RAMS in rolling stock systems in the railway industry.

High concentration of carbon dioxide in subway cabin may cause various adverse effects on the passengers. Because carbon dioxide is produced by breathing of passengers, carbon dioxide concentration at rush-hours is extremely high. In most cases, the ventilation is not that easy for subway cars due to the high concentration of dust in tunnels. In this study, more practical way to control carbon dioxide in subway car was suggested. The decrease of carbon dioxide concentration was observed when the system was applied to a real subway car. The regenerative method for maintenance-free carbon dioxide control system was also suggested.

The railway in Korea has been one of important transportation means as the introduction of high-speed train and progress in subway systems. Also, as increases in the speed of train, the guarantee of safety becomes more important, especially, in the fields of railway vehicles and/or facilities. The structural health evaluation for the prevention and diagnosis of the accidents could be conducted using several types of nondestructive evaluation techniques such as ultrasonic developed using infrared thermography or optic fiber sensors. In this paper, the recent progress in structural health evaluation for railway systems has been introduced, and the case studies have been discussed.

The purpose of Reliability Centered Maintenance(Hereafter, RCM) is to enhance the effectiveness and efficiency of preventive maintenance by applying the improvement plan after analysis of existing preventive maintenance. To accomplish this, it is required to collect the failure data for equipments during operation, and to carry out the quantitative criticality analysis for each equipment. This paper shows that the case study of RCM criticality analysis based on the accumulative failure data and following improvement activity for KORAIL AIRPORT RAILROAD's E&M system.

Advanced EMU have been enhanced in terms of safe transport and maintainability. It is a new urban railway technology that enables an operation institution to cut repair and maintenance costs and customers to use convenient service at lower costs based on IT technology. If a development vehicle of Advanced EMU is completed, it will be used to test the entire advanced EMU system through sufficient performance check and reliability check prior to operation in commercial line. It will also verify efficiency, safety, punctuality and energy efficiency of transport. Accordingly, it is necessary to figure how to repair and maintain vehicles to enhance safety of Advanced EMU system in cooperation with operation during the period of comprehensive evaluation on the operation of a development vehicle in a test line. In this paper, we investigated the maintenance program of Advanced EMU on test operation in Dabul line. The test condition and operation environment of Advanced EMU in Daebul line was analyzed.

최근 자동차, 철도, 선박, 항공기 등 교통수단의 핵심 장치가 CPU가 들어 있는 컴퓨터 제어장치로 전환되어 가고 있는 상황이다. 자동차 사고사례 중 상당 부분의 원인으로 컴퓨터 제어장치에 탑재된 내장형 소프트웨어의 결함이라고 분석한 보고서가 발표되고 있다. 내장형 탑재 소프트웨어에 대하여 결함 제거를 위한 시험이 충분하지 못한데서 문제가 있을 수 있다. 결국 이러한 내장형 소프트웨어의 시험 기준으로 안전성 평가 기준을 철저히 적용하고 이에 적합한 단위테스트 절차를 구축하는 것이 필요하다. 본 논문은 안전성평가 기준에 적합한 내장형 탑재 소프트웨어에 대한 단위테스트 절차에 대한 방안을 제시하는데 그 목적이 있다. 내장형 탑재 소프트웨어에 대한 테스트에는 단위 테스트, 통합테스트, 시스템테스트 등이 있으며, 이중 가장 많은 결함을 발견하는 것은 단위 테스트이다. 본 논문에서는 테스트계획, 테스트절차, 테스트케이스, 테스트시나리오, 테스트 도구, 재테스트 기준 등에 대한 효과적인 단위테스트 준비 과정과 단위테스트를 수행하면서 발생하는 업무, 즉 결함식별, 결함분류, 결함분석, 결함원인, 결함조치 및 확인, 재테스트 실시, 테스트보고 등의 활동을 체계적으로 구축하는 방안을 제시한다. 또한 개발된 내장형 탑재 소프트웨어의 프로그램 소스를 일일이 눈으로 검사하여 결함을 발견하기란 쉽지 않다. 안전성평가 기준이 내장된 테스트 도구를 활용함으로써 내장형 탑재 소프트웨어 단위테스트의 작업시간을 줄이고 결함발견 및 원인분석에 대한 자동화된 보고서를 얻음으로써 테스트 생산성 및 소스코드의 품질 향상을 달성할 수 있는 방안도 아울러 제시한다.

A case study of fire risk analysis was conducted for train coach which has no gangway doors between coaches. The analysis boundary was limited to the time of outgoing from the coaches for it was train fire risk analysis. ASET(available safe egress time) and RSET(required safe egress time) methodology was used for calculating the dead. 4 liters of gasoline and cable fire at the electric cabinet and the standard fire of EN 45545 were selected for the fire sources. The fire were considered to be occurred at 3 different locations in the car. The train had 3 cases of driving scenarios. The result of all event was summarized for remained tunnel and station egress step.

Wide range of methodology of reliability prediction for system exists. For railway field, MIL-HDBK-217F, which has not been revised since early in 1990, is used for reliability prediction if historical data is not available. Since this standard has been published, quality and performance of electronic products have been improved rapidly and various kinds of items have been released, however new versions of items could not be released because the prediction standard could not follow up the speed of the production. Thus, this thesis introduces Telcordia SR-332 Issue 2 and would like to compare and analyze the result from MIL-HDBK-217F together with some cases we performed.

This paper describes the method of how to improve the probability of the tracing stopping ratio which is the most important factor in Automatic Train Operation (ATO). Aspects of improving the performance of automatic driving, the followings are investigated and studied : Brake system maintanence method of vehicle, the need to improve braking system, test method of blending brakes, how to minimize the delay of commands for real-time control. In this study, we applied this method to prove the effectiveness in DAEJEON LINE1.

Since national mid-term target for GHG reduction was determined in 2009, various efforts in transportations have been prepared. Generally, the GHG emission of transportation is calculated using the emission factor published from IPCC guideline(2006). However, it is necessary to develop new emission factors considering the properties of transportation as well as fuel. In Korean railroad, main emission sources are the consumption of diesel and electricity from railcar operation. The GHG emission of electric-powered railcars can be estimated using national electric emission factor, but diesel-powered railcars show different trends. The purpose of this study was to establish the development plans of emission factors for diesel-powered railcars. As a result, the emission factors of diesel-powered railcars were classified into railcar type, engine type and life cycle, notch, load, and traffic volume. In future, several emission factors with this category will be presented quantitatively through field tests with the order of priority.

A recent Tilting train development operation for existing line high speed, already developed "Korean Tilting Train eXpress(bellow TTX)" and that doing demonstration of operation. And TTX are going to commercial service in 2012. They are preparing Environmental Declaration of Product(bellow EDP) for offering environmental impact of TTX to customer. EDP calculated environmental impact of target product's whole life cycle(raw material and manufacturing, distribution, use, end of life) more quantity for that improving environmental impact and then certification them, it is using for that estimate some part of existence of specific pollutants, GHGs, energy consumption and recycling ratio. In this study, 1) analyze the process of getting EDP, 2) satisfy common criteria and each criteria(plan) in the Product Category Rules(bellow PCRs) provided KEITI, 3) according to ISO 14044, implementation of LCA. 4) These results be shown Characterized Impact(bellow CI) about each life cycle stage and six impact categories(ARD, GWP, OD, AD, EU, POC).

Recently the role of a railroad is emphasized as the imprortant part for growth for the low carbon green growth and the social consensus about the railroad investment is actively progressed. The various social economic value in which the travel demand change over of the environment-friendly railroad system can bring becomes with public debate as much as a discussion is not any more necessary. In this research, the influence that it recognized that the travel time improvement by the high speed rail was the most important element among many method that it can increase the railroad use efficiency in which it connects the interregional major cities and the railway travel time improvement reaches to the rate of railway and road travel time, and the environment like the carbon emission quantity was comprehensively inquired.

The regulation involved with railway vehicles is defined by law to protect customer and fundamental safety. The persisting period of domestic railway vehicles in general are 25~30years. Expired railway vehicles are disused in various way. The railway vehicles are consists of recyclable various materials, but there is no standardization or calculating method related with railway vehicles to make disuse scenario. In this study, performed to get a recycling ratio about major materials of domestic subway railway vehicles using ISO 22628 which is Road vehicles-Recyclability and recoverrability method. This research provide foundation for further researches, standardization of EoL stage and recycling railway vehicle.

This paper evaluated the effectiveness for the case of it introduced the bimodal tram for the capital area adaptability of the bimodal tram in the limelight as the new transportation means of the next generation for capital area major transportation corridor. The KTDB with 1,142 zones was utilized for the analysis and the major transportation axis around the main road in which the traffic is high. The analysis index selected around the transportation index in which it can show up by the bimodal tram application and the decrease rate of the road traffic density, the travel time change, the carbon emission quantity change, and etc. was chosen as a result. It was analyzed as the axis in which the bimodal tram adaptability effect that it is high with the section this relative including the major analyzed result west AnSan IC~ Songsan Bridge, the SuWon terminal ~ SaDang station, the UiJungBu terminal ~ DoBongSan station, and etc. can be appeared and it was predicted that the travel demand reduction on the road of about 4~6% showed up.

2020 Korea GHG reduction goal is decreasing 4% compared with that of 2005. Effective counterplan of GHG redection goal needs to set for inductrial allocation and various reduction GHG technologies and policies for transportation have been developed. Modal shifr is one of these main policy and it focused on shifting as much freight as economically meaningful under current market conditions. It improves energy efficiency, consequently reduces GHG effect. This study is proposed as a preliminary studay of analyzing Modal shift effect. modal shift of car travelers to train is concerned in Seoul-Busan section, This study is based on a scenario which can maximize passenger occupancy rate to get the GHG reduction effect and the effect of modal shift of car to train is identified. According to this result, we can get GHG reduction effect through dealing with maximizing passenger occupancy rate on train. Therefore, in order to enhance this modal shift effect, train using rate need to increased and also improvement of policies and cost system are need to be considered to promote increasing use of train.

The status and effectiveness of Bi-modal Tram is analyzed through the comparison of the transport effectiveness and operation cost between the public transportation systems (bus, light rail transit) considering the vehicle and operation characteristic of new transit system Bi-modal Tram. The standard operation schedule is established in consideration of the vehicle specification and operation characteristic of main public transportation modes, and then the annual average operation cost is estimated depending on the volume, speed, analysis length for respective public transportation mode. Through analyzing the operation cost and distribution characteristic of public transportation modes depending on the transport volume and travel speed, the operational efficiency suitable for the city is derived. It is concluded that the operational efficiency of Bi-modal Tram is superior to that of the bus and light rail transit on the aspect of travel volume and operation speed.

We studied the cost-volume supply characteristic of public transportation systems focused on Bi-modal Tram in the main cities to analyze the applicability and status for the new transit system Bi-modal Tram as public transportation system. The operation cost considering the characteristic of vehicle, facilities, operation and average cost for respective public transportation system and the time cost considering the travel and transfer time are defined to the social cost, and the cost-volume supply curve is based on this social cost. The cost-volume supply characteristic between public transportation modes in the city is determined on the basis of cost-volume supply curve. Through the comparison between cost-volume supply characteristic of main transportation systems, it is analyzed about the relation between public transportation systems in the city and the characteristic for proper service provision. The application of Bi-modal Tram in the city is concluded that it is effective to reduce the social cost on the existing public transportation system.

It is a plan the government increases a railroad section SOC investment, and to activate railroad construction while a railroad wins the spotlight with green transportation. But an error of the demand forecast that is a base of a railroad investment evaluation follows in occurring big, there is it with an operation with an obstacle of a railroad investment. Case of the Incheon International Airport Railroad which went into operation recently, While a present transportation demand showed about 10% than a demand forecasted in a past conference, it was magnified in a social problem. A lot of research was gone on in road project about traffic demand forecast and error, a study to find out the error cause is an insufficient situation although errors of a railroad occurs big. So, this study looked for errors and causes about trip generation model and modes sharing model of railroad demand forecast but it was defined causes so that it can occur similar problems in the future. Especially it investigated causes after comparing rate of development plan for the realization and O/D size in trip generation model and after comparing rate of modes sharing of past and current and conducting a survey for airport users. In conclusion, it suggested method to reduce errors of railroad demand forecasting in the future.

Accumulated deficits resulting from managing the Korean Railroad and debts from the construction of the KTX (Korea Train Express which is a high-speed rail system) have left the Korean Railroad faced with great troubles. Since it changed into a public corporation Korail on January 1st, 2005, the Korea Railroad has been making unceasing efforts to overcome the troubles and improve its management. However, even these efforts haven't worked in the face of the improved conditions of other transportation methods such as better networks of land roads and air ways. The Korea Railroad had its revenue from its railway transportation limited, and has tried to expand its business to non-transportational areas. In some metropolitan cities, the Korea Railroad made investments in real estate by constructing station buildings based on private money. Yet, in small and medium size cities, the Korea Railroad has little particular strategic projects for business development. Recently certain small and medium size regional cities began to plan on business developments for the ex-railway land, and some small towns have developed real estate on the ex-railway land. Nevertheless, there have been no systematic case studies to classify these real estate developments.

By Chinese growth, economic development and investment of the West-coast are consisting. Specially, the West-coast area need tourist development and tourism Import for the Incheon and the Pyeongtaekhang of the Gyeonggido Province, China trade through the Chungcheongdo Province area. According to such regional special quality, the railroad tourism industry should be activated. Sunset of tourism infra in the West-coast is high value as representative goods of the West coast. Development of the theme railroad tourism industry that utilize the tide may maximize regional advantage of China and capital region. This research is basis investigation to examine development possibility as sunset theme railroad tourism industry of the West-coast. Scope of this research limited by the sunset theme railroad tourism industry for the Chungchongdo Province area.

Since the efforts in transportation for counteracting Climate Change have been enhanced, it is necessary to reduce GHG emissions from railroad construction. The aim of this study was to develop the calculation method of GHG emissions at the step of railroad construction. Main emission source was the energy consumption from the used heavy equipments. Firstly, GHG inventory including equipments list, energy consumption, and work load was established with the detailed process using standard for the unit cost of construction. Also, the energy consumption of heavy equipments during track construction at A site was collected to compare with the field data. As a result, the GHG emissions between the estimated and the field were a little different, which was caused by the inaccurate field data. Therefore, it is important to manage data efficiently for the calculation of GHG emissions in the field of railroad construction.