중국과 한반도와의 해상교통은 기나긴 역사의 물줄기의 흘러온다. 일찍이 서기 8-9세기 당과 신라간에 있었던 우호적인 린방항해는 역사상 전성기를 이루었다 이글은 중국 한반도와 일본의 상관 고대문헌을 고찰한 기초상에서 청해진(오늘의 한국완도) 장보고(Znang Bao-gao) 대사를 대표로한 신라인들이 당나라에 대한 항해활동 및 그활동이 남겨둔 역사의 자적을 연구함으로서 당시 당과 신라간의 주요한 해상교통선을 논증하였다 본 연구는 아래와 같이 지적하고 있다 1. 장보고는 서기 8-9세기 신라 항해역사상 아주 큰 영향력을 가진 대표인물로서 그는 이시기 동북아시아 항해활동에 역사적 공헌하였다 그가 오늘날 한국완도 및 중국 산동반도 등의 지역에 남긴 유적 들은 중국과 한국 및 전체 한반도 교통연구에 고귀한 문화재로 중시받을 가치를 지닌다. 2. 서기 8-9세기 신라와 당간 해상교통 노선을 쌍방 항해사들이 장기간의 왕래와 합작의 산물이며 이는 구체적으로 북항로 중항로와 남항로등 세갈래 중요 항로로 나누어진다 그가운데: --- 중국 요령 연해로부터 신라에 도달하는 북항로는 역사가 영구한 전통성 항로인데 항해가 안전하지만 항로가 비교적 길다 --- 중국 산동반도로부터 신라에 이르는 중하로는 당시 쌍방 해상 왕래에 매우 중요한 항로로써 장보고 등 신라 항해사들이 중국과 왕래하던 주요항로이다 ---중국 강소와 절강 연해로부터 신라에 이르는 남항로는 기본적으로 중항로가 남쪽으로서의 영신혹은 추동된 것으로서 그 왕래하던 시기는 당나라 이후 중국 송나라 시기인데 서기 10세기 이후이다.

It is important to measure the vehicle flow in controlling the traffic system. This report deals with a traffic flow measurement system using the differential spatial filters. This system can measure the velocity the length and height profile of the vehicle. The detector is located above the traffic lane. This provides the system with the following advantages : one is that each lane can be monitored without an influence of the other lanes the other is that the system construction is simple and can be set easily.

This stud was projected to develop the training course for VTS operators in Korea. The studying method was literature survey and questionnaire. It was properly used and analyzed that such as the concerned literature international symposium results and letters from Canada USA Japan and other countries in order to compare their contents This study proposed the basic training course for VTS operators in Korea on the basis of these data. and also concluded as followings. First the number and level of Korea VTS should be decided. Second the training organization and staff should be build and pointed. Third the VTS trainee should selected and the training level & period should be eatablished, Fourth The training should be the VTS training curriculum. Fifth The VTS operator certificate should be issued by proper test. But this need further study through the analysis for the questionnaire regarding to Korea VTS Training Program.

Mathematical model of maneuvering motion for a single-screw single-rudder ship is established and several applications to the special situations of maneuvering are attempted. While the mathematical model for twin-screw twin-rudder ship is not studied presented so much because that type of ship is not popular. Lee et al. have examined the characteristics of such ship by captive model tests in 1988 in Japan. This paper proposes new mathematical models for propeller effective wake (1-wp) and effective neutral rudder angle $\delta$R in the case of twin-screw twin-rudder ship. And some maneuvering motions are calculated with proposed models and compared with exact simulations.

In this paper A methode for design of hybrid-ring couplers having sections of lenth λ/n is proposed. Assuming only one - axis symmitry and isolation of output arms general expressions for the scattering parameters are obtained. The new design method using λ/n sections for 3 dB couplers is derived, . The calculated frequency reponse of the new design has been compared with that of conventional ones, . A new design using λ/5 section and having an overall length 13λ/10 is found to be superior to the 7λ/6 design is expected to have a low insertion loss by virtue of its shorter length.

High Tensile Steel enables to reduce the plate thickness comparing to the case when Mild Steel is used. From the economical view point this is very preferable since the reduction in the hull weight. However to use the High Tensile Steel effectively the plate thickness may become thin so that the occurrence of buckling is inevitable and design allowing plate buckling may be necessary. If the inplane stiffness of the plating decreases due to buckling, buckling may be necessary. If the inplane stiffness of the plating decreases due to buckling the flexural rigidity of the cross section of a ship's hull also decreases. this may lead to excessive deflection of the hull girder under longitudinal bending. In these cases a precise estimation of plate's behavior after buckling is necessary and nonlinear analysis of isolated and stiffened plates is required for structural system analysis. In this connection this paper discusses nonlinear behaviour of thin plate under thrust. Based on the analytical method elastic large deflection analysis of isolated plate is perform and simple expression are derived to evaluate the inplane rigidity of plates subjected to uniaxial compression.

To realize the RF layer of Rubber Ferrite-Air-Solid Ferrite(RF-A-F) that proposed by Y.Naito it is tried to grasp the formulation of composition by varying the ratio of mole and element of Complex Isotropic Ferrite Nix-A0.1-Zn(1-x-0.1)*Fe2O4 As a result it was found that the characteristics of the electromagnetic wave absorber constructed by the selected formulation of compositionin in RF-A-F type were improved.

When navigating in or near an area of restricted visibility it is necessary to be heard the whistle bell and/or the siren of lighthouses or ships at times. Even though we can get the brief informations about the property of sound the direction and range of a sound radiator it is not easy to get the accurate informations for decision making. generally the audio frequency is known as 16-20,000Hz but the earshot is shorten and discrimination of sound is more difficult when there is some noise. The sound pressure is 60dB at the moment when human speaks 1 meter away. Usually the noise pressure in a silent room is 40dB and 60dB on the quiet street. In this study we suggest the basic algorithm to trace the direction and range of the source radiator using the signal received through not a physical sense but the microphone sensors and a series of signal of signal processing.

A design method of double layered electromagnetic wave absorbers with cross-shaped ferrite prominence in the second layer which has broad band frequency characteristics was proposed. The broad band electromagnetic wave absorber can be designed under some approximations by the theoretical model using the equivalent material constants method for the second layer. Based on the developed model broad band electromagnetic wave absorbers with excellent reflectivity frequency characteristics in the frequency range of 30MHz to 3,990MHz were designed.