This paper presents improved performance on the speed control of Switched Reluctance Motor(SRM) by using fuzzy logic speed controller. The nonlinear model of SRM is used and the motor used in experiment is a 6/4 SRM. In order to prove the superiority of the fuzzy logic controller, it is applied to make use of Matlab simulation program. And to implement the control method on the SRM drive. DSP(TMS320F240) based SRM speed controller is designed and fabricated. The simulation and experiment results show that FLC is effective in settling time maximum overshoot and torque ripple.

This paper presents the characteristics of Switched Reluctance Motor (SRM) based on 3D Equivalent Magnetic Circuit Network Method (3D EMCNM). 3D EMCNM supplements magnetic equivalent circuit by numerical technique using distributive magnetic circuit parameters. However in case of SRM the previous 3D EMCNM which uses fan shape element is not proper for analysis. This paper solved this problem by developing the trapezoid element and verified the validity of the suggested element by comparing the results of 3D EMCNM with 2D FEM.

This paper deals with High Temperature Superconducting (HTS) Motor, which have two characteristics: the HTS magnet with iron plates as field coil, and the solid nitrogen $(SN_2)$ as a cryogen. The HTS magnet has iron plates to achieve the maximum current-carrying capacity and the simple shape that can easily be wound and jointed. The HTS magnet with iron plates, magnet optimized current distribution, and initial magnet are presented through 3 Dimensional Finite Element Analysis (3D FEA), manufacturing and testing these magnets. And, it is employed $SN_2$ for keep the operating temperature of HTS synchronous motor. To make the liquid nitrogen $(LN_2)$ of $SN_2$, Gas helium (GHe) passes into the heat exchanger and cools its own temperature. Two types of heat exchangers are designed and manufactured to make the $SN_2$, and each of the temperature characteristics is compared.

본 논문에서는 공진을 이용한 일정 진폭과 일정 주파수용 가진기 구동 시스템의 구현을 위한 제어기와 시스템에 대한 동적 해석을 수행하였다. 제안된 가진기 시스템의 엑츄에이터는 영구자석형 횡자속 선형 전동기(TFLM)가 적용되었고 가진기의 이동자에는 공진용 스프링을 장착하였다. 이로써 TFLM의 구조적인 장점인 고출력과 공진을 통한 에너지의 고효율의 장점을 갖는 전동식 가진기 시스템을 구현할 수 있게 되었다.

In moving coil LOA, the variation of mover position and the consequent changes of coil flux path affect the coil inductance because of unbalanced magnetic circuit. Furthermore, the armature field shifts and distorts the airgap flux density distribution due to the magnet alone by a certain amount, which cause the unbalanced reciprocating force. In this paper, we propose the reduction method of armature reaction and coil inductance. The proposed LOA has the shorted ring the saturated core, the double coil, and Halbach array.

This paper deals with a simulation and a position control for linear synchronous motor with Halbach array (HA) permanent magnet mover. The results of control simulation for HA-PMLSM having air-core primary are calculated using Matlab Simulink. The prototype of HA-PMLSM is tested DSP (TMS320F240 EVM).

In Case of High speed PM machines with surface-mounted magnet. A rare-earth PM with high remanence flux density is used on the rotor. Therefore, It is very difficult to adhesion and assemble PM on the surface of rotor, because of very repulsive force between magnets. So, for solving this problem, rotor with surface-mounted magnet is wholly magnetized after mounting magnetic-material on the surface. In this paper, In order to Magnetize rotor with surface-mounted PM, magnetizing machine is designed, analyzed and simulated for large PM machines using the 1dimensional analytical method and 2dimensional finite element method. (20-FEM).

We introduce a technique for designing homogeneous magnets using linear programming. The method has several advantages over existing techniques including: it allows complete flexibility in arbitrary geometric constraints on both the coil locations and the shape of the homogeneous volume; it guarantees a globally optimal solution, and it automatically choose the minimum number of coils necessary for the constraints.

This paper presents the performances of eddy current brake for the vehicle. Because travelling magnetic field problem of eddy current brake cannot be analyzed accurately in Galerkin finite element method(FEM) for large cell Peclet number, the characteristics are analyzed by using 2-D upwind FEM. The magnet stack width are compensated in order to increase the precision of the solution. The validity of the analysis results is obtained by comparing with experimental data.

This paper presents an analysis of the characteristics in switched reluctance motor (SRM). 2D finite element method (FEM) considering the iron saturation and the actual switching circuit of the SRM drive is applied for the dynamic analysis. The influence of the rotor shape on the radial force and torque ripple is investigated and the optimal shape of rotor pole is proposed to enhance the torque. The radial force characteristics acting on the surface of teeth is investigated by using the Maxwell's magnetic stress tensor method.

This paper investigates the permanent magnet (PM) overhang effect on the characteristics such as cogging torque and torque in brushless DC motor (BLDCM). The overhang effect has been used to enlarge the performance of the radial flux density in BLDCM and balance the force in the axial direction for the reduction of the vibration. 3D equivalent magnetic circuit network method (3D EMCNM) is used for the accurate and efficient analysis. The characteristics of BLDCM are analyzed according to the variation of overhang length and the optimal length and ratio of overhang is determined.

본 논문은 고압방전(HID)램프용 안정기의 효율을 향상시키기 위하여 자기식 안정기의 코아 및 코일의 권회수에 따른 특성을 분석하고 이를 바탕으로 코아를 설계하는 것이다. 코아의 재질 및 형상에 따른 자속분포를 자계해석 프로그램으로 해석하여, 기존 제품안정기 효율 90%에 비해 향상시킬수 있는 기초배경 및 설계 방안을 제시하였다.

In this paper, an off-tine UPS with CVT(constant voltage transformer) is designed and the experimental result and problems of the designed UPS is given and discussed. This off-line UPS consists of triple-port CVT and PWM inverter which acts as charger and inverter. It can be evaluated in low price because haying simple structure. It offers high performance because CVT restricts the short current automatically about two or three times of rated current, has nearly unit power factor and constant output voltage to varying input voltage. The weak points of this UPS are that the output voltage waveform is not perfect sinusoidal and has phase difference to input voltage. The experimental result and problems of the designed UPS is given.

In this paper, 6/4 Switched Reluctance Motor(SRM) which has simple structure and little switching element is selected basic analysis model. In order to reduce torque ripple causing noise and vibration, we execute optimization of geometric parameters (stator and rotor pole arc) and electrical parameters (turn-on angle and turn-of angle) by means of combining Fletcher-Reeves's Conjugate Directions and Finite Element Method (FEM) considering driving circuits. When considering the switching condition according to inductance profile, torque characteristics is influenced by geometric and electrical parameters importantly. The pole arc and switching angle of the optimum can also obtain the low torque ripple without high currents.

In this paper, the force test of arch-type LIM is treated. The method of direct measurement is used load-cell on 3-component force guage. Indirect method is used search coil on LIM. PC-based data aquistion system include two method and measure the force in driving state. Measured data of direct and indirect method are analyzed and compared.

This paper describes the current control simulation of the Linear Oscillatory Actuator and then, the dynamic simulation algorithm considering the armature reaction effect. Thirdly, the control algorithm is proposed to reciprocate a load without mechanical spring at the required stroke and position.

This paper review the effects of the primary length, number of pole and stack width on the efficiency and power factor in linear induction motor. The effects of change of the primary current density on the primary weight, loss and temperature rise is investigated. As the criterion of goodness for SLTM's, the motor weight is considered.

자성체 코어의 비선형 특성을 이용하여 DC와 AC 전류를 측정하는 Zero-Flux Current Transformer는 정밀 전류 측정용으로 많이 연구되고 있다. Zero-Flux Current Transformer는 DC 대전류 측정에 합당하며 저 전류 측정에 사용될 경우 소모전류, 안정되고 첨예한 필터 제작, magnetic modulator에 의한 zero point drift, 자화 전류가 비대칭일 때 출력 등과 같은 문제가 해결되어야 한다. 그리고 상용으로 사용하기 위하여 Hand-Held Type으로 제작되어야하며 동작시의 소모전류가 작고 정확도가 우수하여야 한다. 본 연구에서는 자화 전류가 비대칭일 때 출력을 zero로 만들기 위하여 사용하는 필터와 복잡한 회로로 구성된 magnetic modulator 부분을 여러개의 peak detector를 사용하여 AC와 DC를 측정하는 클램프미터를 개발하였으며 그 특성에 대한 내용을 기술하였다.

The nonlinear transient characteristic of single-phase induction motor for rotary compressor is analysed by using FLUX2D. And the topology optimization is investigated and the TOPEM (Topology Optimization for Electromagnetic Systems) is developed using the finite element method (FEM). The proposed method is validated by applying it to the topology optimizations of single-phase induction motor for reducing the oil circulation rate (OCR).

고 기록 밀도의 HDD를 위해서는 HDD Media의 선 기록 밀도와 트랙 밀도를 높여야 한다. 선기록 밀도를 높이기 위해서는 HDD Write Head의 Field Gradient가 커야하고, 트랙 밀도를 높이기 위해서는 Write Head의 Aspect Ratio가 작아져야 한다. 본 연구에서는 3차원 유한 요소법을 이용하여 Write Head의 재료의 자기적 성질과 형상에 따른 고 기록 밀도용 Pole Tip Write Head를 설계하였다.

중저압 분야에서 가장 많이 사용되는 차단기는 진공차단기이다. 진공차단기는 $SF_6$에 비하여 간단하며, 아크소호 능력 또한 뛰어나다. 이런 진공차단기에서 차단성능에 가장 중요한 부분이 진공차단부이다. 본 논문에서는 constricted arc와 diffuse arc에 관하여 서술하였으며, contrate type 진공차단부의 다양한 형상변경에 따른 직교자계와 축자계에 대한 3차원 전자계 해석을 수행하였다. 3차원 전자계해석으로 얻어진 결과는 새로운 진공차단부 개발에 커다란 도움이 될 것으로 사료된다.

Recently, almost cruise are manufactured with electric propulsion system. The characteristics and types of the electric propulsion motors, which is one of the most important component in electric propulsion system for ships, are examined and compared. And a trend on the recent technical development of electric propulsion motors for ships is introduced.

The faults of the squirrel cage induction motor is grew increasingly complex as the faults resulting in the shorting of a stator winding and the broken rotor bar or cracked rotor end ring, bearing faults, and so on. The users of electrical machines initially relied on simple protections such as over-current, over-voltage, earth-fault, etc. to ensure safe and reliable operation. but this method cause heavy financial losses and the threat of safety therefore it has now become very important to diagnose faults at there very inception. in this paper, we are going to discuss the detection method of broken rotor bar of squirrel cage induction motor by the motor current signal analysis(MCSA) and the opening terminal voltage signal analysis.

In this paper, system equation of the magnetic equivalent circuit of the induction motor be consist of the magnetomotive force transformation matrix and the flux transformation matrix. The system equation is fed by three phase sinusoidal current and get to magnetomotive force on the teeth. This study confirmed the time and spatial distribution of the magnetomotive force on the teeth created by the winding.

This paper presents the analysis, design and performance of an axial-flux permanent magnet(AFPM) motor with a core-less stator. Axial-flux permanent magnet motors prove to be the best candidate for application in electric vehicles(EVs) as direct drive wheel motors, as in comparison with conventional motors. They allow designs with higher compactness lightness and efficiency. The paper discusses design and construction of a prototype motor, and reports experimental results achieved from laboratory tests.

This paper suggests the torque control method that is possible to control Switched Reluctance Motor(SRM) directly without the various data: The proposed control method uses the real-time estimated torque that is based on the Linearized mechanical Work Operation(LMWO). The suggested torque control strategy is verified by simulation and experiments in this paper.

It is a indispensible condition that the simulation and the experiment to improve a efficiency of maglev system. We usually carry out the simulation using the approximate equation, because it is impossible to use a exact modeling such as a practice modeling. This paper proposed a ideal simulation ap to the maglev system modeling by Finite Ele Method. To save the electrical energy, zero p control method is used, and verifying the feasibi FEM dynamic simulation, we make an exper with a TI DSP TMS320F240-based hardware.

The permanent magnet in hybrid step motor is magnetized to the axial direction. Accordingly the 2D analysis method such as 2D finite element method cannot guarantee the analysis accuracy. In this paper, the characteristics of hybrid type step motor are analyzed by using 3D equivalent magnetic circuit network method(3D EMCNM). 3D EMCNM supplements magnetic equivalent circuit by numerical technique using distributive magnetic circuit parameter and 3D EMCNM is used for the accurate and efficient analysis. The validity of the analysis results is confirmed by comparing with the experimental ones.

This paper describes the design and the analysis of permanent magnetic actuator "Magnetic Switch" using classical method and 2D finite element method. The classical method gives an outline of permanent magnet size and analysis is carried out by finite element method. Therefore we make use of the result in specific detail site of magnet. The transient state is simulated in order to calculate the response time of "Magnetic Switch". The simulation is based upon a step-by-step integration of the electric circuit equations and the tore movement. The contactor uses a permanent magnet for maintaining the closed state. The presented solution takes account of non-linear magnetic material property and spring force controlled by core position. The dynamic response of "Magnetic Switch" is predicted by the simulation agrees closely with the required condition.

Prototype DSLPM (Double Side Linear Pulse Motor) has a complicated magnetic circuit to be composed of permanent magnetics and winding. During the fabricating of DSLPM, we found that upper airgap length may be a little different from lower airgap length because of fabrication tolerance and error. So, a little difference of both airgap length have a various effect on the characteristics of DSLPM. Therefore, in this paper, we analyzed the normal force and maximum static thrust force according to the difference of both airgap length on DSLPM with finite element method. Obtained results can be used for design of DSLPM with higher performance.

This paper describes the problems generated with the use of PWM ASDs with induction motors. The major effect of harmonic voltages and currents in induction motors is increased the heating due to iron and copper losses at harmonic frequencies. The harmonic components thus affect the motor efficiency and developed the torque. In order to investigate the effect of harmonics which is caused by using of nonlinear load at the low voltage system, we set up simple load system and measured the voltage and current. Measurement results show that additional operation of induction motor at the parallel bus in using nonlinear load such as ASD is helpful to the reduction of harmonic current.

Generally, the owners of the facilities adopt CP(Cathodic Protection) Systems to protect the corrosion accidents previously. The developed countries have secured the standard of CP systems and its test methods through the various researches and consolidation of the rules. So, we have been studying the international standards; JSEC, NACE Standard, ASTM, DNV, Australian Standard etc. and standardizing the systems and its test methods to apply in Korea.

In this paper we are to explain the development of circuit breaker characteristic tester for 25.8kV Gas Insulated Switchgear. Because of hermetically sealed cubicle, we have the difficulties of installation and usage of tester. Therefore we developed measuring tester and software. This tester can measure CB close/trip time, coil current, stroke, chattering time. And it has CB positive/ negative discrimination program, trend management program, DB management program.

This paper describes the operating characteristic analysis of PM-type magnetic circuit breaker for electromagnetic field, electric circuit and mechanical motion problems. Transient calculations are based upon the magnetic equivalent circuit analysis including non-linearity of materials and using iteration routines. The analysis results of this magnetic equivalent circuit are compared with those of FEM.

Axial magnetic field(AMF) type electrode can increase the interrupting capability of vacuum interrupters. But, this interrupting capability vary with design parameters such as shape of electrode, slits of contact, material of contact and so on. In this paper, shown arc characteristics of unipolar axial magnetic field type electrode for vacuum interrupter by design parameters such as shape of contact slits and diameter of contact. And, confirmed vacuum arc configuration by individual design parameter using high speed camera.

The neutron controls a nuclear fission in the core of reactor. In-core neutron detector drive system is a equipment that drives detector and cable to survey neutron flux in the reactor. The program introduced by this paper governs proto-type drive system. The basic function of drive system is the insert and the withdraw of a cable, and the control of the movement speed. Also this program have a special function, test, auto operation, to increase the capacity of drive system.

본 연구는 탐지대상물체의 형상인식이 가능한 비접촉, 원격 탐지장치의 개발에 관한 것이다. 본 연구에서는 2극 또는 4극의 정자기장을 인가할 때 탐지 대상 물체에 의한 자기장의 자계외곡을 32개의 Hall Sensor로 감지하여 탐지 대상 물체를 인식하는 원격 감지 System을 설계하였다. 투자율에 따른 민감도는 10 이하에서 우수한 특성을 보였고 위치에 따른 민감도는 2극에서는 어느곳에 있어도 특성이 좋았고 4극에서는 중심에서는 특성이 좋지 않으나 물체가 센서 가까이에 있을 때 특성이 좋았다.

다수의 Bi-2223테이프로 구성된 고온 초전도모델전력케이블의 통전손실을 조사하였다. 전력케이블의 임계전류는 각각 테이프의 임계전류가 유사하다할지라도 전류리드-테이프사이의 접속저항으로부터 기인하는 불균일 전류분포 때문에 전압리드의 접촉위치에 의존하였으며, 전력케이블의 통전손실은 전압리드의 접촉위치 및 전류의 주파수에 무관하였다. 따라서 전력케이블의 통전손실은 케이블의 상이한 임계전류에 영향을 받지 않으며, 전류의 주파수는 각각 테이프에 흐르는 전류분포에 영향을 미치지 않음을 의미한다.

A Bi-2223 tape has been developed for power applications such as power cables or transformers working at liquid nitrogen temperature. For such applications it is required to understand fault current characteristics of the Bi-2223 tape. In this paper, we report fault current characteristics using two types of samples, straight sample and pancake coil sample. It was found that the fault current characteristics of the Bi-2223 tape are depend on electrical insulations and fault durations strongly. Also it was shown that the fault current characteristics in the insulated straight sample are similar to those in the pancake sample with a conductor insulation. Finally, it was shown that the pancake sample with a layer insulation has better characteristics than that with a conductor insulation for fault currents.

In this study, BIEM(Boundary Integral Equation Method) using Green's function is applied in order to analyze 3D electric field precisely. The algorithm is developed with equivalent electric surface charge as a variable, which promises less unknown variables and higher accuracy of electric field analysis. The validity of the developed program is varified by applying it to a coaxial cylinder mode and 3-phase GIS model.

A FEM model of the remote-field eddy current effect is presented for zirconium-2.5percent niobium(Zr-2.5%Nb) nuclear reactor pressure tubes to demonstrate the important electromagnetic field. Phenomena that describe this effect. This model is applied to evaluate the optimal operating frequency and detector position. There are many ambiguous experimental results connected with this technique. Finite element calculations can be used in the interpretation of these experimental results even though the electromagnetic fields measured in the remote-field technique are very small.

A computational method for the 3 dimensional electro-magnetic induction problems has been developed. The proposed method is capable of modeling the eddy current and analyzing its characteristics using only scalar potential. A benchmark model of asymmetrical conductor with a hole is analyzed to verify the application of the developed method. The calculated value of magnetic flux density are compared with the measured value, and the results indicate that the developed method is valid.

This paper considers the research of the hybrid interrupter which adopts both rotating arc and thermal expansion technology. The operating principle of this device depends on rapid arc rotation due to the magnetic field created by the fault current through a coil which is mounted on contacts and also relies on the principle of thermal expansion created by arc energy in extinguishing chamber and finally causes pressure rise in expansion volume. To develope this type of interrupter, we introduced analytical analysis including electromagnetic and arc fluid simulation and experimental analysis including construction of current source generation facility and arc behavior measurements. In this research, the principle of the interrupting techniques are given and analytical and experimental results of hybrid interrupter which is developed by new technology is introduced.

The expert system monitoring and diagnosing 765kV power apparatus was described in this paper. To develop this expert system, we studied the knowledge bases and data bases for 765kV transformer and GIS. In order to make the reliable inference of knowledge base and the good MMI(Man Machine Interface), the data bases were consisted of the tables of power apparatus information, limit level value, measured input data, inference result and diagnosis result. The knowledge base had various rules to infer the conditions of transformer and GIS. We applied both the forward chaining and backward chaining methods to these rules of system for good inferences. This paper describes the applied methods for expert system. Also, this developed system was tested with dissolved gas analyzing result and the result was shown.

This paper investigates efficiency and power factor of Switched Reluctance Motor (SRM) using Finite Element Method considered driving circuit. The efficiency and power factor are calculated in Input terminal and Output terminal respectively. When calculating power factor, apparent power is obtained by effective voltage and current because SRM is operated by switching of driving circuit. Efficiency is calculated by mechanical output and active power. Finally, the characteristics of efficiency and power factor in three proposed models are compared due to the switching pattern.

This paper describes the finite element analysis(FEA) for the design of electromagnet for SMART CEDM and compared with the lifting power characteristics of prototype electromagnet. As a result, it is shown that the characteristics of prototype electromagnet have a good agreement with the results of FEA.

In this paper, back commutation phenomena for iron chute chamber in AC low testing. For this experimental we used high speed camera and carried out with same prospective currents up to 10kA RMS. Hybrid arc quenching chambers which are composed with iron plate and insulating materials tested for reducing back commutation phenomena in interrupting process. It is shows that hybrid chambers which are various narrow slot path width reduces back commutation. As a result, a new type arc quenching chamber is to force the arc rapidly into a narrow insulating slot with iron plate. By this means the arc is lengthened and squeezed between insulating walls. Using this model, the behavior of the arc squeezed in the hybrid chamber and characteristics of arc voltage are also investigated.

MCCB(Molded Case Circuit Breakers) is a multi-function safety device which, unlike other forms of protection, combines many protection features in a single unit. This paper is the analysis of magnetic repulsion forces with the breaking current 11.28kA, 22.5kA, 38.9kA and 45kA.

This paper is about the characteristic analysis of a heater-trigger HTS switch. It is composed of a BSCCO tape wire and a heater as a thermal quench source. To minimize the heat flow to the liquid nitrigen, the epoxy was used around them. The heater-trigger switch operates in the process that the HTS tape is thermally quenched by the current flowing through the heater. Since the switch works in coolant, it needs to be designed by the accurate thermal characteristic analysis. Here, we focus on FEM for it.

This paper deals with simulation of the three-phase dc reactor type fault current limiter(FCL). This is a preliminary step to develop the FCL's faculties for an application to high voltage transmission line. A three-phase dc reactor type FCL consists of transformers, diodes, and a superconducting coil. By this simulation for the short-circuit test we can investigate the safety of FCL's elements. And, result of simulation will contribute parameter toward optimal design.

The high temperature superconductor transformer gains interests from the industries. This paper examined characteristics of the laboratory scale three phase HTS transformer and Brandt equation is used to calculate the loss by perpendicular magnetic field in transformer winding. To estimate the performance of the three phase HTS transformer no load characteristics, short circuit characteristics are calculated by using finite element method. Transient characteristics of sudden short circuit during full load operation have been examined. Effect of the resistance growth in the HTS wire from the quench of the wire is included in the calculation.

Ion plating method using plasma is faster as several times than electron beam plating method in plating process. Recently, a variety of techniques for this method are being researched. In this paper to produce sheet plasma with high density for ion plating we designed magnetic circuit of MgO plating device consisting of solenoid coil, rectangular permanent magnet. And, we researched on the effect of those by analyzing magnetic field distribution using FEM.

For the development of a small-sized superconducting magnetic energy storage (SMES) system we designed, fabricated and tested the model coil consisting five coils with different features, e.g. winding tensions, bore diameters and materials, cooling channels. The results show that even in the highly pre-stressed small coil A, about 70 % of the coils critical current are degraded. The quench current of the coils A, B and E with narrow cooling channels is two times as high as that of the coil C without them though they are similar except spacers. The test results also indicate that the usual training effect depends on the winding tensions of the coils but the quench characteristic does not change according to materials of a bobbin.

Digital signal processors(DSP) are widely used in modern power conversion devices, ac motor drives. However, generating pulse-width modulation(PWM) gating signals requires so high sampling rates that most computation resources of the DSP must be devoted to generating them. This paper presents an ASIC realization of 2 channel space-vector PWM(SVPWM). The developed DSP(ECLDSP) board can transmit gating signals to 2 converter/inverter and control them. ECLDSP board is used for control the various kinds of power-quality improvement systems.

The high temperature superconducting bulk can be used as the bearing of a motor. This paper presents the fabrication and test results of a motor with superconducting bearing using HTS bulks. The bearing used four hexahedron type YBCO bulks. Height, width and depth of the HTS bulk were 10mm, 30mm and 30mm, respectively. Single phase induction motor was used to drive the shaft and solid rotor was adopted for high speed rotation. Test results show the motor with HTS magnetic bearing can rotate silently and smoothly without any contact.

Induction heating is utilized in a large and ever-increasing number of application. The most prominent of these are billet heating, heat treating, metals joining, and metal melting. In these day, heating roll, a kind of induction heating, is widely used in curing of coatings and fiber industry. In this paper, we analyzed thermal characteristic analysis of induction heating roll according to primary material. Using this analysis results, efficiency of induction heating roll could be improved.

Magnetic field distribution of rotating flux type Low-Tc superconducting (LTS) power supply with respect to the applied current on exciters is investigated in detail by using Finite Element Method (FEM). LTS power supply consists of two exciters, a rotor, a stator and superconductor foil attached to the inner surface of the stator and LTS load. The current pumping of LTS power supply is induced by partial-quenching and recovery of superconductor foil. For this reason, magnetic flux density on superconductor foil must be sufficiently greater than the its critical magnetic density. In this analysis, the normal spot on superconductor foil appears more than 10A of excitation current. The results of this analysis are calculated and compared with the experimental results.

Moving flat core LOA consists of iron flat core as a mover and electric magnet as a stator and operated by electromagnetic force between mover and stator. In a moving flat core type, it takes advantage of doing not have to be equipped with power supply device, having a lower manufacturing cost. But it has a lower linearity and precision. In this paper, a static characteristics of LOA were studied and analyzed using FEA. Experiments, electromagnetic force and inductance according to air gap and input currents, were carried by exciting coil. And we compared these results one another.

This paper deals with the dynamic characteristics of flat core LOA. The LOA system was represented by the voltage equation of coil and the mechanical equation of motion. Also, driving system was simply composed voltage source inverter and generates square-wave. It is measured that dynamic characteristic vary as square-wave.

This paper describes numerical analysis of eddy current testing for tube with axi-symmetric defect using boundary element method. In this ECT(Eddy Current Testing) numerical analysis. BEM and FEM are used to compare their characteristics and results of ECT, respectively BEM is easier than FEM to design geometrically complex domain because in case of BEM, domain is divided into segments or elements, but in case of FEM, domain is divided into small finite triangular or quadrilateral elements. For this reason asymmetry defect is used for this BE numerical analysis. As a result, the similar result can be obtained through both numerical analyses, and BEM can be applied to the numerical analysis of ECT.

The characteristic of magnetostrictive is to change shape in a magnetic field, TERFENOL-D is said to produce magnetostriction. A magneto strictive actuator need to the magnetic circuit. The most important design consideration is the magnetic circuit. The magnetic circuit consists of the solenoid coil, permanets for bias and shaping of the other parts through which the magnetic field passes. A good magnetic circuit ensures the proper magnetic field in th TERFENOL-D and very uniform magnetic field in all phases of the actuator operating cycle. This paper presents magnetic circuit design and analysis uesing FEM.

This study investigates the characteristics of touch-free permanent magnet gear according to design parameters. The effects of the design parameters on the magnetic torque is analyzed by using 3 dimensional Finite Element Method (FEM). The considered parameters are magnetization thickness, skew angle, stack length, inner and outer diameter and the number of pole. And the validity of analysis method is confirmed by the experimental results.

전동기 전원 개폐를 주목적으로 하는 전자개폐기는 빈번하고 불규칙한 개폐동작에 의해 발생되는 Arc 에너지에 대해 전기적으로 내구성능을 확보하는 것이 중요하다. 또한, 전기적 내구 성능은 수명과 품질을 결정하는 요인으로서 선진업체에서는 내구성능을 향상시키려 연구개발 활동에 집중하고 있다. 이러한 전기적 내구 성능을 향상, 평가하기 위해서는 장기간에 걸친 시험 기간과 시험규격에서 요구하는 조건을 만족시키는 시험 회로와 설비구성이 필수적이다. 여기서는 전기적 내구 성능에 대한 이해와 시험규격을 통한 시험회로 설계 및 설비제작에 대해 설명하고 시험결과를 분석하고자 한다.

We have studied quench characteristics for current limiting elements of YBCO films in applied fields of 0 - 130 mT. The films were deposited on sapphire substrates and covered by gold top layer. The current limiting element consists of 2 mm wide YBCO stripes connected in series. The electric field - current density (E-J) measurements showed that the presence of applied magnetic fields induces uniform quench distribution for the stripes, otherwise non-uniform quenches were observed. We suggest that suppressing the critical current by increased fields due to fault current effectively forced the stripes of higher Jc(0) to quench, resulting in equalizing quench times.

In order to evaluate the structural safety from an earthquake, the seismic analysis of large structures such as GIS in electric power substations and equipments for nuclear power plant has been carried out because the seismic qualification by experiment is very expensive. This paper presents the seismic analysis of the 72.5kV GIS produced by LGIS. The finite element model of the GIS is developed and analyzed using ANSYS. The model consists of beam elements for the enclosures and mass elements for the conductors and the mechanisms. Using the transient analysis under seismic load, the structural safety is verified.

Linear pulse Motors(LPM) are widely used in fields where smooth linear motion is required, and their position accuracy is higher than other motors. Hybrid linear pulse motors(HLPM) are regarded as an excellent solution to positioning problems that require high accuracy, rapid acceleration and high-speed. The LPM has low mechanical complexity, high reliability, precise open-loop operation and low inertia etc. in many application areas such as factory automation speed positioning, computer peripherals and numerically controlled machine tools. This motor drive system is especially suitable for machine tools the high position accuracy and repeatability. This paper describes about that need of the embroider machine, we want to design position-scanning device for the embroidery machine. At first, to be analysed characteristics of the machine and next designed the LPM. we used the field analysis program, The finite element method(FEM) program tool is employed for calculation the force. The reluctance models will be used the magnetic permeance of air gap by static- conditions. The forces between forcer and platen have been calculated using the virtual work method.

The topology optimizations of electromagnetic systems with the nonlinear and the eddy current effects are studied using the finite element method. The topology design sensitivity formulations of nonlinear magnetostatics and eddy current systems are derived using the adjoint variable method. A computer program is developed using object orient programming and applied to the topology optimization of a C-core actuator. A numerical study shows the effects of saturation and eddy current by comparing results of topology optimizations.

In this paper, three dimensional Equivalent Magnetic Circuit Method(3-D EMCN method) a numerical analysis method which supplements to magnetic equivalent circuit adding numerical technique, is proposed for analysis Optical Pickup Actuator. (3) This method provides better characteristics both in precision of the analysis and in computation time than other analysis method such as three-dimensional Finite Element Method. We choose the simple 2-magnet moving coil type pickup actuator model and verify upper yoke effect using this method.

This paper describes the finite element analysis(FEA) for the design of common core-type and separated core-type rotational speed sensor(RSS) for SMART MCP and compared with the low/ high speed characteristics of prototype RSS. As a result, it is shown that the characteristics of prototype RSS have a good agreement with the results of FEA.

In this study, we have estimated the brushless DC motor parameters by means of back-emf measurement and step input test. The validity of proposed parameter estimation method is confirmed by step res pons experiment. And the reasonable digital controller is designed with the root locus method of motor transfer function and revised Ziegler-Nichols gain determination method. The system stability is experimentally verified by the frequency domain analysis used Bode plot.

SRM은 회전자의 구조가 간단하고 간단한 제어장치로 구동이 가능한 장점이 있지만 Cogging Torque로 인한 소음, 진동, 토크리플 등으로 인해 SRM의 안정화 운전에 장애가 되는 단점이 있다. 이를 제거하기 위한 방법으로는 외부회로에 제어기를 도입하여 전류파형을 조절하는 방법이 있으나 이 경우 고가의 복잡한 정밀제어기를 부착해야한다. 본 연구에서는 회전자의 형상을 조절하여 Cogging Torque를 감소시키는 방법을 연구한다. 이를 위하여 유한요소법을 이용하여 설계변수의 민감도를 계산하고 최적화 기법을 사용하여 형상변경 실시를 반복하여 최적설계를 하고자 한다.

This paper presents the analysis method to predict the current waveform and instantaneous and average torque of permanent magnet brushless motors(BLDC). In this paper, the method to improve the torque characteristics of BLDC, especially phase advanced angle, is also presented. The validity of this method is verified by comparing to measured results.

The use of permanent magnet motors have increased as controlled motors throughout the world. According to the development of magnetic materials and control technology, the motors are required to small size and compact design. Therefore it is introduced for servo motor to be contented with the characteristics of CNC machine tools in this paper. It is represented for the result of design, analysis, manufacture and test of the motor.

이전에 개발된 Magnetic Fluid Linear Pump는 자기 회로가 솔레노이드 형식으로 자기회로의 대부분이 공극이기 때문에 자기저항이 크다. 이런 문제로 인해서 Linear Pump의 자성유체에 영향을 주는 자기장이 크지 않고 펌핑 압력은 높지 않다. 따라서 본 논문에서는 Permalloy Yoke를 이용하여 Linear Pump를 소형화하고 자기 저항을 최소화함으로써 펌핑 압력을 향상시켰다. 또한 Linear Pump의 3D해석을 통하여 Yoke의 폭, 두께, 간격에 대한 최적 크기를 계산하였다.

In this paper, We have designed the new model in order to the thrust and normal force of HLSM. Also it was analyzed by Finite Element Method and Virtual Work Method. As a result this paper, it was confirmed that the thrust and normal force was improved considerably.

Voltage varing Fate dv/dt which is applied to induction motor usually makes unnegligible leakage current and it flows through stator winding and motor frame. This kind of harmonic leakage current makes effect on power source and cuases electromagnetic trouble because the motor frame has earth. Therefore in this study, a high frequency induction motor model is developed and analyze the motor performance to explain the phenomena. Inverter model is also developed and is combined with the motel model to prepare the basis of the high frequency effects on inverter fed induction motor.

Precision control technologies are required for photolithography. The linear BLDC motor is used for the stage operations. The stage that is installed in a photolithography device is basically controlled in three directions(x, y, z axes). This paper presents precision control technologies of the linear BLDC motor in one direction by computer simulations. A position control system with linear BLDC motor is now being tested.

On this study the motor design method with fairly good characteristics and control capability as well as cooling capability is presented with considering the magnetic effect due to ventilation hole, which is installed to prevent the temperature rise. When the input voltage rises due to critical variation in traction power supply system, the final ventilation hole is presented by checking the inductance parameter with clarifying the relation between saturation of the motor core and the ventilation hole.

In this paper, by designing ratio width of the permanent magnet versus the stator coil, double excitation LDM with multi-separated winding which is possible to obtain the constant thrust force is proposed. Using Empulse, this paper has explained a various excitation mode to analyze the thrust force of multi-separated winding LDM. The simulation results show single-phase excitation mode have low thrust force ripple.

Permanent-magnet generators have been used for wind turbines for many years. This paper deals with the AFPM(Axial - Flux Permanent Magnet) Generator with a high power-to-weight ratio, dedicated for small wind turbines. The designed and constructed generator as a prototype in this study is a slotless type AFPM Generator with Neodymium-Iron-Boron magnet rotor. Based on that construction, a magnetic circuit analysis of the generator is carried out. Some important equations covering its characteristics and construction are derived and its magnetic and electrical characteristics are investigated.

통과형 금속 탐지기(Walk-through Metal Detector)는 공항 등의 장소에서 보안 검색용으로 널리 사용되고 있다. 기존의 1차원적인 통과형 금속 탐지기는 총기류와 다른 금속체를 구별하기가 힘들다는 문제점이 있었다. 본 논문에서는 이런 문제점을 해결하기 위해서 2차원적인 탐지가 가능한 새로운 형태의 통과형 금속 탐지기의 모델을 제시하였고, 유한요소법(FEM)을 이용해 기존 모델과 비교 검증하였다.

Permanent magnet DC motor is widely used in electrical tools, automotive manufacturing systems, electric vehicles, OA system drives, aircrafts and home appliances PM motors are suited for such an application, since they can be designed for high torque-to-speed ratio and efficiency. This paper deals with permanent magnet DC motor which is used in an electrical wheelchair. The motor has 6 PMs and 25 slots, and is coupled to the wheel with gears. In this study, motor design was carried out using finite element method. This paper discusses the design and construction of the prototype system and reports experimental results achieved from laboratory tests.

This paper shows the characteristic analysis for an inverter fed induction motor by the 2-D F.E.A. in variation of the air gap length. Harmonic effects of the induction rioter with different air gap length driven by the 6 step voltage of inverter ate investigated. And the results of the characteristic analysis on the inverter fed induction motor are compared with those of sinusoidal voltage fed motor.

This paper describes a characteristics of MFL according to the position of Hall sensor Magnetic Flux Leakage(MFL) Method is used to detect surface defect in ferromagnetic plate. A plate has a surface defect and magnetizing equipment are producted to perform Non-Destructive Testing(NDT) using MFL. The SM 45C carbon steel plate is adopted to this experiment. there is a artifical defect with a twice of thickness and a half of depth of plate. Magnetizing equipment is composed of yoke made by layer-built of silicon sheet steel, NdFeB magnetic and iron brushes. Detecting defect is performed by MFL NDT using Hall sensor. It is shown that magnetic flux detected by Hall sensor is affected according to the position of Hall sensor through MFL experiment and numerical analysis.

본 논문은 휴대용 발광 장치 충전을 위한 영구자석형 선형 발전기의 특성 해석을 담고 있다. 공간고조파법을 이용해 자계 해석 및 설계를 하였다. 발생 전압 및 저항에 따른 특성 비교와 충방전 시간 측정을 포함하고 있으며, 전기자 반작용 해석 결과도 포함되어 있다.

In this paper, we made mathematical modeling of BLDC motor system and design of PI controller. Using Apache web-server and PHP web-programming, we embodied virtual laboratory for PI controller design of BLDC Motor system by using proportional constants$(K_P)$ and constants of integration$(K_I)$.

잘 교정된 유도성 전압 분할기는 다른 교류 전압 분할기들을 비교 교정하기 위한 전압비의 표준기로서 사용되어질 뿐 만 아니라 각종 임피던스 정밀측정용 브리지의 비례 arm으로서 사용이 되어진다. 이러한 유도성 전압 분할기를 비교교정 하기 위한 교정시스템이 연구제작이 되었다. 본 연구 논문에서는 제작방법, 교정방법, 그리고 오차 등에 대하여 관하여 논의하고 실제교정결과와 분석된 결과를 비교한다.

Line-start motor has ability to start itself without using other methods, so, it is important to predict starting performance accurately. In this paper, the starting characteristics of single-phase capacitor-start, capacitor-run line-start motor was calculated by combination of d-q axis voltage equations and mechanical dynamic equations. D-q axis inductances of this machine varied with current phase angle and amplitude are considered. The validity of analysis method verified by comparing to test results.

This paper deals with analysis for demagnetization characteristic of a ferrite magnet line start motor using FEM. Maximum start and clock currents are calculated by transient state voltage and dynamic equation, and then, these currents are applied to FE analysis. The characteristics of motor according to partial demagnetization are analyzed from FE analytic results, and rotor shape is designed for improvement of demagnetization characteristic.

This paper presents dynamic characteristic of a 2 phase hybrid stepping motor which includes pull-out torque with constant voltage drive and one step response. In order to analyze this characteristics, vector diagram of a synchronous motor and torque-voltage equation are used. Analytic results are good agreement with experimental results.

The cogging torque and torque ripple in motor which cause noise and vibration are an inevitable phenomenon and they give a bad effect to motor performance. So we are required to reduce the cogging torque and torque ripple not by electrical controlling but by changing the inner mechanical structure and we focused on the permanent magnet. In this research, we calculated current, torque, Back-EMF(electromotive force) and cogging torque according to the change of the magnet shape using two dimensional FEM(Finite Element Method). Maxwell stress tensor and time-stepping method. From the results, we present an appropriate model that can satisfy both low cogging torque, low torque ripple and high efficiency.

In this paper, we analyze the characteristics of electecromotive force(emf), phase current and torque according to the length of the air gap using 2nd order FEM(Finite Element Method) in Synchronous Reluctance Motor(SRH) and Brushless DC Motor(BLDC) with same volume and size. In the analysis with FEM, we applied the time-step function considering the motor switch in the magnetic vector potential of the unknown node.

In this paper, electromagnetic fields of a linear induction motor with cage-type secondary are analyzed by the finite element method. Contact resistances between end-bars and secondary conductors are considered in the finite element analysis. The field quantify is a magnetic vector potential transformed into a phasor form. As a result, the sensitivities of a phase current thrust and normal force are presented according to the variation of the contact resistance.

This paper presents experimental method of parameter measurement and starting characteristics of 3 phase induction motor. Equivalent circuit parameters measured by DC test, the blocked rotor test, and no load test were used as the input data for computer simulation. Starting characteristics, such as starting current and torque were analyzed through computer simulation by Matlab, and the simulation results were compared with experiment using strain gauge attached on motor shaft. We conform that experimental results are very similar to that of simulation.

In this paper, the vibration characteristics of a 2-phase Hybrid type Linear Stepping Motor(HLSM) are analyzed using the ACSL. A magnetic equivalent circuit is based on the structure of the HLSM, and then the electric equivalent circuit of the HLSM is derived by solving equations for the magnetic equivalent circuit. A normal force is calculated using FEM(Flux2D). And the vibration characteristics(Continuous vibration) of the HLSM are simulated by the ACSL with the voltage equations, the thrust equation, the normal force equation and the kinetic equation.

The single transformer appeared the electro-magnetic force must be constructed to support it. it must construct the single transformer to supporting the electro-magnetic force appeared by the cut-off current. the problem is that the electro-magnetic occurs the modification of the single transformer and an serious accident. In the case of the molding-transformer, the part of the molding cast used in the construction occurs the crack, because of the strong force. therefore, in this paper, the molding material used in the molding-transformer is settled by comparing the results from commercial soft ware of F.E.M and a out-equipment circuit.

The Linear Oscillatory Actuator(LOA) has very few components and a highly simplified structure, and therefore promises to be simple and reliable. The actuator consists of winding as a stator and mover includes permanent magnet. In this paper, LOA was designed and manufactured, before design and manufacture, characteristic of thrust was analyzed using FEA, LOA was manufactured according to design specification.

In this paper, we developed the algorithm for assembling and iterative numerical analyzing of non-symmetric sparse matrix equation in finite element method. Developed program in this study is applicable and very useful to analyze the electromagnetic characteristics of the electric machinery considered with the movement of the secondary.

Generally large synchronous rotating machines with 2 poles have more merits than the others with more than 2 poles Superconducting synchronous rotating machines also have the same tendency, but they have different structure from conventional ones because of no magnetic core inside of the rotor. As the result, design approaches of the superconducting field coils are also different, which would be classified into 2 types according to their coil shapes. The first one is race-track type and the other is saddle type Race-track type machines have almost the same structure with conventional salient pole generators which are being used as largely small scale machines with more than 2 poles. On the other hand saddle type machines correspond to conventional cylindrical generators with 2 poles used for large turbine system in power plants. In this paper several types of superconducting field coils are introduced for 2 pole superconducting machine design and then the feasibility of each type is considered. Moreover, based on the consideration. 1MVA superconducting generator(S.G.) with saddle type field coil is designed electromagnetically.

Salient pole rotor type single phase SRM(switched reluctance motor) can be use axial direction magnetic flux and radial direction magnetic flux at the same time. Then, it has higher energy density per unit volume and can be lessened the shaft length of motor or exciting magnetic force. Additionally, it's durability is good because it is simple structure and driving device. Prototype of Salient pole rotor type single phase SRM was fabricated by using parameters of three phase SRM and 3D FEM analysis. Also, driving device was fabricated for prototype. Speed and torque characteristic was confirmed through the experiments, and flux linkage, which is important parameter of SRM for generating torque, was measured. The induction emf was calculated by using ideal inductance graph and current graph. Calculated emf and measured emf was compared for confirming loss of prototype in this paper.

The switched reluctance motor (SRM) is gaining much interest as a candidate for electric vehicle for its simple and rugged construction, ability of extremely high-speed operation. This paper is to design and investigate the capabilities of the SRM for low speed electric vehicle (LSEV).

This paper proposes a new driving scheme for single-phase SRM. The driving scheme is very simple and inexpensive. By use of this scheme, simple power devices based on low switching losses enable to high efficiency SRM drive. Starting, one of the main problem in single-phase SRM is overcome 2 using a parking magnet. This drive system has a high efficiency and robust drive characteristics compared to that of a universal motor.

The switched reluctance motor (SRM) has a simple motor construction with no rotor windings. It also has simple concentrated windings on the stator windings. Thus it is expected to be a lower cost machine to manufacture than other motors. This paper has computed an optimal parameters asking for SRM drives using by PC-SRD that was programmed by T. J. E. Miller/M. Mcgilp. According to advanced angle and dwell angle, the output, efficiency, currents and torque were computed. The experiments with 8/6 SRM have tested.

A moving-coil-type linear oscillatory actuator is consisted of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure and an iron core as a pathway for magnetic flux. The inductance of moving coil and the push/pull effect is obtained from the permeance model of LOA with the open magnetic circuit. The analytical method are verified using the 2D finite element method.

This paper deals with a comparison between the secondary Halbach array and conventional array of permanent magnets(PMs) in linear synchronous motor(LSM). The finite element method(FEM) is employed for characteristic analysis of the machine. Two types of PMLSM are analyzed and compared, with reference to the following parameters as variables: magnetic field, detent force, static thrust and thrust/secondary weight ratio.

배관의 덴트 및 주름의 형태 크기와 위치, buckle의 여부와 위치, 배관의 난형도 및 곡률을 파악하기 위해서 사용되는 Gemometry PIG의 캘리퍼 시스템에 Mechanical Finger를 back-yoke의 유무, 영구자석의 크기, Pin Hole의 위치와 영구자석의 위치 등을 3차원 비선형 유한요소법으로 해석한 후 이를 바탕으로 최적설계를 하여 이를 실제 제작하여 측정치와 비교하였다.

The eddy current brake system is one of important application of eddy current. It is adequate to obtain safe braking force in high speed transportation system and electric vehicle etc. There is a variety of configurations and materials used in manufacturing of eddy current brakes. This paper proposes the eddy current brakes which uses permanent magnet. The dynamic characteristic has been analyzed to FEM and compared with measured data.

This paper presents analysis linear Halbach array. For the theoretical aspects of this paper, the time variation of electric field related quantities is insignificant. A result of analytical method to calculate the magnetic flux density compared with a result of numerical method. Also when linear Halbach array moves above a closed loop, a developed force between linear Halbach array and a closed loop is analyzed.

It must be able to calculate thrust to design and manufacture linear BLDC motor by required specification. If magnetic energy with respect to displacement of mover of linear BLDC electric motor be obtained, thrust can be calculated. It can decide optimal design factor of linear BLDC motor through change of thrust by design variable using magnetic energy method. It can predict variation of thrust by pitch of pole and design optimally using coenergy that is attained from FEM.

In general, the accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. But the region of high speed, switching angles are fluctuated back and forth from the preset values, which are cause by the sampling period of the microprocessor. Therefore, the low cost linear encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple analog type switching logic circuit is also presented in this paper.

This paper studies the influences of the magnetic radial forces on the vibrations of the Switched Reluctance Motor(SRM). The effects of changing the switching angle on the magnetic forces is analyzed by Finite Element Analysis. Theoretical and several experimental results explain clearly the origins of vibrations caused by radial magnetic forces and current.

This paper presents a magnetic circuit design procedure by using Response Surface Methodology(RSM) to determine initial and detail design parameters for reducing torque ripple in BLDC motor of Electric Power Steering (EPS). RSM is achieved through using the experiment design method in combination with Finite Element Method and well adapted to make analytical model for a complex problem considering a lot of interaction of design variable Moreover, Sequential Quadratic Problem (SQP) method is used to solve the relsulting of constrained nonlinear optimization problem.

This paper proposes the analysis method for the pole change motor that is a capacitor-run single-phase induction motor. As the Magneto motive force(MMF) at 2-role becomes severe distortion, it is necessary to consider the harmonics for the characteristic analysis of the motor. Therefore, the performance of motor is analyzed by equivalent circuit considering the harmonic components. The validity of the proposed analysis method for the pole change motor is verified through simulations and experimental results.

The winding design of a capacitor-run single-phase induction motor for changing two poles(2-/4-pole) is proposed for reducing the harmonics of Magneto Motive Force(MMF) in the airgap at 2-role. To improve motor performance, it is important to analyze exactly the harmonics and design the winding pattern for its harmonics reduction. The winding design method to reduce the harmonics is suggested in this paper and its characteristics are analyzed by using equivalent circuit considering harmonic components. The various performances of the pole change motor with the proposed winding pattern are compared with the experimental results.

본 논문에서는 유한 요소법을 압전체에 적용하여 계산한 임피던스 파형을 실험적으로 검증하였으며 이를 압전 변압기에 적용하여 압전 변압기의 공진 특성 즉 입력측에서의 전기적인 임피던스 및 출력측에서의 전기적인 임피던스를 해석하였다. 또한 압전 변압기의 공진 모드를 나타내는 어드미턴스 궤적을 이용한 압전 변압기의 등가 회로 정수의 계산을 통해 등가 회로를 구성하였으며 무 부하시의 승압비를 계산하였다. 등가 회로를 이용하여 계산된 승압비의 결과를 유한 요소법을 이용한 결과와 비교하여 손실을 나타내는 등가 회로 정수(R)를 계산하였으며 유한 요소법에 의한 기계적인 진동 손실의 결과와 비교하여 계산된 저항(R)값의 타당성을 검증하였다.

We investigated the properties of a hybrid type superconducting fault current limiter (SFCL), which consists of a transformer with multiple secondary windings and resistive $YBa_2Cu_3O_7$ (YBCO) thin film stripes. The secondary windings of the transformer were coupled with each other, and a superconducting current limiting unit of YBCO stripes was connected to each of them as a switch. Simple connection in series of SFCL units tends to produce imbalance in power among the units due to slight differences in quench current. In current design, magnetic coupling between the SFCL units provides a solution to power dissipation imbalance, inducing simultaneous quench by current redistribution in the YBCO films.

PMSM drives are widely used in industrial and residential applications because of high efficiency, high power density and high performance. For better performance of PMSM, however, torque ripples should be reduced. This paper investigates a reduction of torque ripple due to the unsinusoidal flux linkage produced by the shapes of stator slot and magnetic pole. To minimize torque ripple, a simple flux estimator is proposed. This method iteratively compensates the distributed flux linkage from an error between the measured and estimated currents. The proposed algorithm is verified through simulation.

In the field of factory automation, single phase induction motors are frequently used for speed control application because of its simplicity and low cost. In this paper, we compare the performances of a single phase induction type speed control motor with a BLDC motor. From the experimental results in the controllable torque-speed load range, the efficiency characteristics and safe operation load areas are compared for each type sample motor.

This paper presents the characteristics of current harmonics and torque ripple of Brushless DC motor, which is developed the fan blower of vehicles, according to permanent magnet shape input voltage wave form. To investigate the torque ripple and the phase current harmonics, these characteristics is analysed and compared the experimental results. In the process of analysis, FEM is introduced and computed a transient state torque of BLDC with a sinusoidal and a PWM wave voltage.

Induction Motor fed by PWM inverter generates the sound and the vibration because of harmonic current and magnetic force characteristics. This paper is investigated the harmonic frequency and noise characteristics of the current and the torque of the induction motor when the input voltage is excited as the sine wave or PWM wave. The performance characteristics of induction motor is analyzed by the F.E.M and the theoretical method.

This paper is proposed the modeling and computational methods for estimating the steady and dynamic characteristics of a transverse flux type SRM. Prediction of the steady and dynamic characteristics state of a switched reluctance motor (SRM) drive can be quite involved because of complex interdependent influences between motor parameters and excitation. To obtain characteristics parameters of the transverse flux type SRM which is considered the magnetic non-linearity phenomena, the magnetic equivalent parameters of SRM are computed by the finite element method as functions of the input current and angular displacement. Dynamic characteristics of the designed transverse flux type SRM is simulated and estimated by Matlab/simlunk.

This paper presents a calculating method for inductance of the Switched Reluctance Motor(SRM) for torque characteristics and driving by analytical model. The approaches for calculating inductance have taken vary from detailed finite element analysis(FEA) and Fitting method in magnetization curves using complex nonlinear magnetic circuit models. But those methods have not satisfactory approach for machine performance calculations, because of having a long time and remodeling for analyses, therefore thus an alternative approach is required. So it is suggested simply calculating method of the inductance based on designed data of machinery by analytical model in unaligned and aligned rotor. In order to prove the calculating, there are compare with analytical FEM, direct measurement, this method, and simulation. The compared result is shown to obtain good accuracy.

An efficient control method of ZVS Full-bridge PWM converter with a periodic pulsed-load current is proposed. This novel control method can reduce the switching loss of switches during no load condition. Moreover, by using feed-forwarded load current information this method can obtain better transient dynamics compared to the system with only linear feedback control.

This paper presents parallel operation of ZVT(Zero Voltage Transition) Full Bridge Converter with Dynamic Current Shared Inductor. In the conventional method, CT(Current Transformer) have been used to share the load current equally with converters. In this system, at parallel operation of ZVT Full Bridge Converter, dynamic current shared inductor divides the same current of unit converter and ZVT circuit aids to high efficiency. This method which is proposed to compare in the conventional method will do simple control circuit. To show the superiority of this converter is verified through the experiment with a 2kW, 50kHz prototype converter.

This paper proposes a new zero-current switching (ZCS) pulse-width modulation (PWM) switch cell that has no additional conduction loss of the main switch. In this cell, the main switch and the auxiliary switch turn on and turn off under zero current condition. The diodes commutate softly and the reverse recovery problems are alleviated. The conduction loss and the current stress of the main switch are minimized, since the resonating current for the soft switching does not flow through the main switch. Based on the proposed ZCS PWM switch cell, a new family of dc to dc PWM converters is derived. The new family of ZCS PWM converters is suitable for the high power applications employing IGBTs. Among the new family of dc to dc PWM converters, a boost converter was taken as an example and has been analyzed. Design guidelines with a design example are described and verified by experimental results from the 2.5 kW prototype boost converter operating at 40kHz.

This paper proposes a new zero-current transition (ZCT) pulse-width modulation (PWM) switch cell that overcomes the limitations of the conventional ZCT converters. The proposed ZCT cell provides zero-current-switching (ZCS) condition for the main switch and the auxiliary switch. The conduction loss and current stress of the main switch are minimized, since the circulating current for the soft switching does not flow through the main switch. The proposed ZCT PWM switch cell is suitable for the high power applications employing IGBTs. Design guidelines with a design example are described and verified by experimental results from the 1 kW prototype boost converter operating at 70kHz.

This paper presents a new zero current switching (ZCS) inverter for grid-connected photovoltaic single phase inverter system. The auxiliaey circuit for the soft-switching consists of two resonant inductors and two resonant capacitors as well as two auxiliary switches rated at lower power. The proposed circuit provides zero current switching condition for all the switches, which reduces switching losses significantly. It is controlled to extract maximum power from the solar array and to provide sinusoidal current into the mains. The validity of the proposed system is verified by experimental results from the 1.2kW prototype inverter operating at 40kHz.

기저부하조성 및 부하율 향상을 위한 심야 전력요금제도의 정착으로 최근 심야전력축열기기의 보급이 활성화되고 있다. 그러나 모든 심야전력축열기기들이 심야요금개시시간대인 22:00경에 동시에 가동됨에 따라 23:00에 심야전력 부하가 최대에 이르러 전력피크가 발생하여 한전의 수요관리에 큰 어려움을 주고 있다. 따라서 이 피크 부하를 심야전력 공급시간대의 저부하시간대로 분산시킬 수 있는 심야전력기기 통전시간제어가 필요하게 되었으며, 이에 개발된 알고리즘을 실증시험을 통하여 검증하게 되었다.

In this paper, a novel plastic type compound core for a transformer and inductor of DC-DC converter proposed. The experimental results and application potentials of a Flyback DC-DC converter based the plastic type compound core are presented. The experimental converter, that has a maximum power of 24W, switching frequency of 200kHz and input voltage of 110-220V, has been successfully implemented. A maximum power conversion efficiency of the experimental converter was measured at 76%, and the output was regulated at 12V within 0.2% tolerance.

In this paper, the RC filter for mitigating the output overvoltage of the 3-level 3300V 4MW inverter is described. The descriptions on power circuit and overvoltage phenomena are presented. The output transformer which may be used to obtain the higher output voltage, makes the filter design difficult because the parameter measurements are not easy and the accuracy may be poor. So, this paper presents several preliminary results on the output overvoltage with or without transformer to investigate the overall system characteristics. Some experimental results are also provided when the designed filter is applied.

전원 측 전압강하/상승 (Voltage sag/swell)을 보상하기 위한 동적전압보상기(Dynamic Voltage Restorer)등의 직렬 보상기에서 스위칭으로 인한 인버터 출력전압의 맥동(ripple)을 제거하기 위해 LC 필터가 사용된다. 본 논문에서는 LC 필터에서 커패시터의 전압을 상태 궤환을 이용하여 제어하는 알고리즘을 제시한다. LC 필터의 이산시간 상태 방정식을 구한 후, 궤환 이득값을 구하는 과정이 z-평면에서 이루어진다. 그리고, 제어기의 계산지연을 고려하여, 상태 관측기를 설계한다. 제안된 제어기는 기존 직렬보상기와 달리 전류 센서를 필요로 하지 않기 때문에 경제적인 이점을 가지게 된다.

Recently, the power supply equipments have tendency to take multiple feedback loop paths. In this paper the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the gurantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test results. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency $f_c$ is nearly 1/5 of switching frequency $f_s$, from the experimental result with frequency response analyzer.

This paper shows how to design a Global control, using Field Orientation, avoiding to use the DC/DC converter, and finding the relationships among the DC magnitudes and AC ones. And This paper deals with water pumping system which economic and durable storage systems for sustained production of power and propose MPPT methods using $i_{qs}$ of BLDC motor without battery module and chopper circuit.

This paper presents a method to reduce commutation torque ripples occurred during commutation in brushless do motor drives using a single DC-link current sensor. In brushless dc motor drives with a single dc current sensor instead of 3-phase line current sensors, it is noted that dc-link current sensor cannot give any information corresponding to the motor currents during line current commutation intervals. A new technique to resolve such a problem is dealt with based on a deadbeat current control in which motor armature voltage command is computed from a dc-link current reference, an actual current and counter emf voltage. The simulation results show that the proposed method reduces the torque ripple significantly.

The application of SRM(Switched Reluctance Motor) is dramatically increasing due to a simple mechanical structure, high efficiency and a good high speed characteristics. Generally, turn-off angle of power switch must be limited the demagnetization period. To control high conduction ratio in motor operation and regenerative voltage in the generator operation in the SRM, multi-level voltage control is effective. This paper proposes multi-level inverter to have a maximum conduction ratio of SRM. The proposed method is verified by experiment.

SRM has different characteristics according to their control methods. Therefore, A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed. As results, it improved the efficiency about 2(%) and decreased the noise level up to 5[dB]. And a torque ripple is also sufficiently reduced compared with that of the conventional switching angle magnetizing approach.

Sensorless induction motor drive is much studied due to the cost and reliability of speed and position sensors. Most sensorless algorithms are based on the mathematical modeling of induction motor including electrical variables such as phase current and voltage. Therefore, the accuracy of such variables largely affects the performance of sensorless induction motor drive. However, the phase voltage does not have to be directly monitored because of switching noise, and they may be reconstructed by using the command voltage. The output voltage of SVPWM-VSI supplying the motor has a considerable error, especially in a low speed range because SVPWM-VSI has a poor resolution in a low command voltage. Such a voltage information effect in speed sensorless control of induction motor has been investigated in this paper.

This paper presents a digitally speed sensorless control system for induction motor with direct torque control (DTC). Some drawbacks of the classical DTC are the relatively large torque ripple in a low speed range and notable current pulsation during steady state. They are reflected speed response and increased acoustical noise. In this paper, the DTC quick response are preserved at transient state, while better qualify steady state performance is produced by space vector modulation (SVM). The system are closed loop stator flux and torque observer for wide speed range that inputs are currents and voltages sensing of motor terminal, model reference adaptive control (MRAC) with rotor flux linkages for the speed fuming signal at low speed range, two hysteresis controllers and optimal switching look-up table. Simulation results of the suggest system for the 2.2 [kW] general purposed induction motor are presented and discussed.

The new converter topology using full bridge inverter for the switched reluctance motor drives is proposed. The proposed SRM drives are supplied by the pulse voltage source, while the conventional drives are supplied by dc voltage source. Proposed converter maintains the characteristics of asymmetric bridge converter and has advanced characteristics.

고전압 펄스파워를 이용한 장치들이 환경설비 및 군용기술 등 여러 분야에서 적용되고 있다. 이들 장치는 고전압전원장치가 필수적이다. 고전압 전원 장치는 소형이면서 높은 반복 율로 재충전이 가능하고 안정성 있는 운전이 요구되어진다. 개발된 전원장치는 펄스발생기의 에너지 저장 캐패시터를 50 kV까지 층전할 수 있고 다수의 병렬운전이 가능한 정전류 전원장치이다. 본 전원장치는 200 nF 캐패시터를 6.48 ms이내에 50 kV까지 충전할 수 있도록 설계되어있다. 본 논문에서는 직렬공진에 의해 35 kW, 50 kV의 고전압을 만드는 전원장치의 동작시험에 대한 결과를 보이고자 한다.

This paper presents an approach based on knowledge models to detect and isolate faults in a voltage source inverter. These faults do not affect the existing system protections. A diagnosis system which uses only the input variables of the drive is presented. It is based on the analysis of the current-vector trajectory and of the instantaneous frequency in faulty mode. These two methods have been verified in simulation results.

고 주파수 스위칭 동작을 하는 DC/DC 컨버터(인버터)를 효율적으로 제작하기 위하여 고주파용 펄스 변압기의 역할은 매우 중요하다. 완벽한 펄스를 재현하는 동작주파수가 100kHz, 용량이 3kW 그리고 부피가 $400cm^3(7cm{\times}7cm{\times}7cm)$이하인 DC/DC 컨버트(인버트)용 변압기를 개발하기 위하여 코어 및 권선의 선정, 권선의 배치, 코어 및 권선의 손실, 변압기의 발열, 변압기의 누설 인덕턴스, 권선 케페시턴스, 분포 케페시턴스 그리고 공진 주파수 등을 고려하여 설계 및 제작하여야 한다. 본 논문에서는 위의 여러가지 요소들을 고려한 변압기의 설계, 제작 시험 및 펄스 실험에 대하여 기술하고 변압기의 권선 배치 방법에 따른 출력 파형 개선에 대한 실험 결과에 대하여 기술하였다.

In conventional zero-current-switching(ZCS) PWM converters, the switching loss, stress and noise can't be minimized because they adopt auxiliary switches operated in hard-switching. In this paper, new ZCS-PWM converters of which auxiliary switches always operate with soft-switching are proposed. Therefore, the proposed ZCS-PWM converters are most suitable for systems requiring high-power density. The characteristics of these converters are verified by experimental results.

This paper presents average current-mode control AC/DC ZVT(Zero Voltage Transition) Boost Converter. This boost converter perceives feed forward signal of input and feedback signal of output for average current-mode control proposed converter employs active-clamp method for ZVT. This converter gives the good PFC(Power Factor Correction), low line current hormonic distortions and tight output voltage regulations. This converter also has a high efficiency by active-clamp method. The principle of operation, feature, and design considerations are illustrated and verified through the experiment with a 150W, 120kHz prototype converter.

This paper presents a new hybrid control scheme using Active-Clamped Class-E (ACCE) inverter of induction heating(IH) jar for high power applications. The proposed hybrid control scheme has characteristics, which act as class-E inverter at lower switch voltage and ACCE inverter at higher switch voltage than reference voltage of the main switch by feeding back voltage one as well as advantages of conventional ACCE inverter such as zero-voltage switching(ZVS) of the main switch and the reduced switch voltage due to the clamping circuit. Moreover, the proposed control method makes higher output power than conventional ACCE inverter control one since ACCE inverter is operated like class-E inverter at low voltage condition. The principle of the proposed control are explained in detail and the validity of the proposed control scheme is verified through the several interesting simulated and experimental results.

The AT Forward MRC is studied on the stability. The compensator is composed of the error amp with 3 poles and 2 zeros. This is optimized through the experiment. The converter loop gain is measured using HP4194A. We are initiated by the thinking of how to make the stabilization from the experimental results of loop gam curves. The loop gain, low frequency gain and gain margin are more improved through the experimental considerations.

This paper presents a novel three-phase current-fed Pulse Width Modulation converter with switched capacitor type resonant DC link commutation circuit operating PWM pattern strategy under a design consideration of low-pass filter, which can operate on the basis of the principle of zero current soft switching commutation. In the first place, the steady state operating principle of this converter with a new resonant DC link snubber circuit is described in connection with the equivalent operation circuit, together with the practical design procedure of the switched-capacitor type resonant DC link circuit is discussed from a theoretical viewpoint on the basis of a design example for high-power applications. The actively delayed time correction method to compensate distorted currents due to a relatively long resonant commutation time is newly implemented in the open loop control scheme so as to acquire the new optimum PWM pattern. Finally, the experiment of set-up in laboratory system of this converter is concretely demonstrated herein to confirm a zero current soft-switching commutation of this converter. The comparative evaluations between current-fed hard switching PWM and soft-switching PWM converters are carried out from a viewpoint of their PWM converter characteristics.

because the output of solar cell is direct, it is necessary to install D/A converter system for A.C load, and in case of driving utility line system, it is possible to drive system relation when the system supplies sinusodal current ant voltage having unit power factor. As the characteristics of the soar cell output the is influenced by dailysunight charge, for more electric power it is essential to control the direction toward the san so that the driving point of solar cell can always operate near maximum output point. PWM modulation device among electric power converters must have stable modulation at anytime when it includes noise-factors such as noise-wave and noises on electric voltage wave, a synchronous signal system. In dealing with synchronous signal for control and control signal by microprocessor, it is necessary to compensate it because there is time difference between sample paint and carrier wave. On this papers, single phase PWM current type invertor controled the solar cell having typical voltage dropping character has optimun short current in short, reduces D.C reactance, composes controller for modulation and keeps lower harmonic and high power factor keeping maximum output of solar cell according daily sunlight charge variation.

This paper proposes a bi-directional current switch with snubber regeneration using Power MOSFETs and this paper proposes to use a loss-less snubber with switching device to perform soft-switching. It results in not only decreasing switching loss in the device drastically, but also improving input ac current waveform distortion. The computer simulation results show that the input current waveform and show the requirements necessary for the elimination of the 3rd harmonic component. We also show the procedure to design the parameters of the converter.

In this paper, proposal circuit proposes that load parallel resonant DC-DC Converter consist of L and C resonant tank circuit. Also, the capacitor$(C_1,\;C2)$ connected in switch are a common using by resonance capacitor and ZVS capacitor. The analysis of proposed circuit uses normalized parameter and characteristic estimation which is needed in each step before design is generally described the proposed circuit with the characteristics of average power and average output voltage etc. Alse, we conform a rightfulness theoretical analysis by comparing a theoretical values and experimental values obtained from experiment using MOSFET as switching devices.

In this paper, we propose a three-phase soft-switching PWM-PFC converter and describe the circuit operations and the experimental results. The proposed converter is constructed by using a resonant network in parallel with the main switch of the conventional PWM converter. A new PWM-PFC converter achieves including the auxiliary switches without increasing their voltage and current stress.

As well known, a solar cell has an optimal operating point to be able to get the maximum power $P_{max}$. So, many $P_{max}$ tracking controllers using the line voltage of a solar cell have been popularly used. But it may vary depending on the miss match between the solar cell output and the load. In this paper, we investigate the possibilities of $P_{max}$ control using the current tracking controller and the output voltage and the output current instead of the solar cell output power. And we also examine about the optimal power converter using ZVCS step up and down chopper circuit to operate the solar cell at an optimal voltage using these variables. And then, we show some experimental results to confirm the successful operation.

This paper presents an improved hys- teresis current control method for three-phase PWM power inverters using 3-level comparator. Hysteresis current controller using 3-level comparator has an advantage of constant switching frequency compared with conventional hysteresis current controller. However, this method has disadvantage that the longer sampling period, the larger current error because the switching is performed without considering current error magnitude of each phase. The proposed method improves the control performance by selecting the optimum switching pattern in which the magnitudes of current errors are considered introducing space vector concept. Simulation results using Matlab/Simulink show that the proposed control method reduces current error keeping the merit of previous hysteresis current control method.

A half-bridge type resonant current injection type high frequency resonant inverter using ZVS(Zero-Voltage-Switching) used as power source of induction heating at high frequency is presented in this paper. This proposed inverter can reduce distribution of the switching current because of using the current of serial resonant circuit to the input current of the parallel one. The analysis of the proposed circuit is generally described by using the normalized parameters, the principle of basic operating and the its characteristics are estimated by the parameters such as switching frequency and load resistance. According to the calculated characteristics value, this paper proves the validity of theoretical analysis through the Pspice.

LCD 모니터 화면의 대형화와 슬림화에 따른 모니터 내의 백 라이트용 냉음극 방전램프(CCFL)도 가늘어지고 길어지고 있으며, 하나의 램프를 이용한 백 라이트로는 휘도의 한계가 있어 램프를 병렬로 사용해 필요한 휘도를 만들고있다. 멀티램프 구동용 인버터는 소형, 고효율화 뿐만 아니라 대출력이 요구된다. 방전램프가 정밀하고 동일한 제작 과정을 거치더라도 점등, 주파수, 전압, 전류 등 여러 가지 특성이 동일하지 못하다. 이는 각기 상이한 램프특성 때문에 초기 점등조건이나 점등 후 동일한 휘도를 갖기 어렵다. 본 논문에서는 멀티램프를 최소의 인버터 개수로 같은 입력조건에서 같은 출력을 갖도록 설계한다. LCD 모니터 내부에 상하 각 2개씩 4개의 램프를 내장하고 있는 18인치형을 이용하였다. 하나의 구동용 인버터를 이용하였으며, 결과적으로 90%이상의 휘도대비 입출력 효율을 얻었으며, 램프간의 출력차이가 미소하여 상용화 가능하며, 또 다른 방전램프의 멀티구동에 이용 가능하다.

This paper proposes a nonlinear impedance circuit composed by diodes and inductors or capacitors. This circuit needs no control circuits and switches, and the impedance value is changed by the polarity of current or voltage. This paper presents one of these applications to improve the input current of capacitor input diode rectifiers. The rectifier using the nonlinear impedance circuit id constructed with four diodes and four capacitors in addition to the conventional rectifiers, that is, it has eight diodes and five capacitors, including a DC link capacitor. It makes harmonic components of the input current reduce and the power factor improve. A circuit design method is shown by experimentation and confirmed simulation. It explained that compared conventional pulse-width modulated (PWM)inverter with half pulse-width modulated (HPWM) inverter proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting.

This paper proposes a new control strategy of multifunctional uninterruptible power supply(UPS) with the performance of active power filter which compensate the harmonics and reactive power. To improve the transient response for the effective compensation in active power filter mode, it is considered that a simple and precise calculation method of the compensation reference current for the harmonics and reactive power compensation. So a novel closed-loop control strategy is used to calculate the reference current. And the current regulated instantaneous voltage control scheme is used in back-up power mode. The system model and control algorithm are described and analyzed, and the system performance is verified by the simulation results.

This paper describes a boost converter to be operated at the boundary of continuous current mode(CCM) and discontinuous current mode(DCM) for power factor correction and low cost. A control method to be utilized in simulation is a average-current mode method in case of operating in CCM. The simulation results show that Better is the CCM converter then the DCM converter in harmonic content and input current waveform. And A Double-boost converter is superior to single-boost converter for input-current harmonic.

The switching circuit of PWM inverter is very complicated. By using one-chip $\mu$-com the complication of switching circuit is possible to be diminished. But because in one-chip $\mu$-com the limitation of processed memory size exists, the switching handling method has to be simple. In this paper, to effectively utilize the switching handling, we presented the estimation method of PWM pulses which is different form the conventional PWM switching method by the comparison.

The purpose of this paper is to analyze the harmonics of power electronics equipment, especially 3 phase square-wave inverter. In this paper, we simulated 3 phase square-wave inverter by using the matlab and analyzed the simulated output waveforms to analyze the harmonics included in the inverter. In the matlab we expressed to amplitude and phase of harmonics current, and calculated to total harmonics distortion of out voltage.

This paper proposes a new power conditioning system for the SMES composed of a thyristor PWM converter with a resonant commutation circuit. The operation of the proposed system and the dynamic interaction between SMES and the power system is analyzed by a theoretical approach with equivalent circuits and verified by computer simulations with EMTP, considering a typical 154kV power system. The proposed system can provide a solution for the power factor regulation and harmonic level reduction in the ac terminal with low-cost system configuration.

In this paper, the harmonic components generated by those two sources are analyzed separately based on the transfer function and shown as the closed form considering the switching frequency, speed of the control processor, gain of the controller, and the inductor and capacitor value of L-C filter. A design procedure is described with one flow chart and explained step by step.

자동차 분야에 있어서 자동차 바퀴의 림(rim)용접에서 flash butt 용접이 널리 이용되고 있는 데 이 분야 역시 경량화에 따른 고강도 강재의 채택이 불가피하게 대두되고 있고, 고장력강의 flash butt 용접이 중요한 이슈가 되고 있다. 좋은 용접품질 획득을 위한 균일한 가열을 위해 전류의 시간적 편차가 큰 thyristor에 의한 제어는 큰 flash를 유발할 수 있어서 고장력강과 같은 경우에서 산화물의 발생을 유발시킬 수 있기 때문에 주의하지 않으면 안된다. 따라서 flashing과 upset의 균일성을 획득하기 위해서는 용접전류의 편차가 크지 않도록하는 기술과 최적의 전류를 공급하는 기술, 그리고 용융량과 배출량의 함수적 제어가 중요한 데 이를 위해서 인버터 방식의 전류제어기술이 개발되면 큰 효과를 기대할 수 있다. 본 논문에서는 DSP controller를 이용하여 사이리스터 위상제어를 다이오우드 정류기와 직류 링크 캐패시터, PWM 인버터로 구성해 인버터 방식의 정전류제어 기술을 개발하여 용접성을 비교 실험하여 결과를 보여준다.

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator, in our project, we develop the power quality compensator of 150kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power qualify problems[1,2]. As a series and shunt compensator, power quality compensator consists of two inverters with common do link capacitor bank. It compensates the current quality in the shunt part and the voltage qualify in the series part. In this paper we present the design and control algorithm of power quality compensator. As a control algorithm is implemented by digital controller, we consider sample-and-hold of signals. In this simulation, we use EMTDC/PSCAD V3.0 software which can simulate instantaneous voltage and current.

현재 한국통신에서는 전원공급방식을 크게 직류전원공급방식 및 교류전원공급방식으로 구분하여 공급하고 있다. 이러한 직류전원 및 교류전원으로 이원화된 통신서비스용 전원설비를 운용함으로써 대용량의 통신설비에 전원공급 시 국사상면의 부족현상이 심화될 뿐만 아니라 전력소비량증가 등 많은 문제점이 대두되고 있다. 따라서 본고에서는 우선 직류 및 교류전원공급방식의 특성 및 실제로 교류전원을 직류전원으로의 전환방안과 대체 시 얻는 장/단점 및 경제적 이득에 대해 서술하고자 한다.

In this paper, we studies PWM control method for 400kVA inverter. This method is compared with the conventional sinusoidal modulation method applying to the power converter with large capacity. The inverter controls a PWM modulation using a DSP processor.

A propulsion system apparatus is needed for a railroad vehicle to test and estimate propulsion performance. The electrical inertia simulator to facilitate the development and testing of propulsion systems, is presented in this paper. It is based on a vector-controlled induction motor drive supplied from the AC mains through a double PWM converter that provides desirable features such as bi-directional power flow, nearly unity power factor and low harmonic factor at the AC mains. A theoretical analysis is first presented, followed by a detailed simulation study to assess the overall system performance under dynamic conditions.

This paper presents a design techniques for an electronic ballast of HID lamps. An electronic ballast for HID lamps usually employs a high frequency resonant inverter and voltage-to-frequency converter to control the output and a half-bridge and series resonant circuit are chosen for the ballast. In this paper, the new lighting method for the stable ignition regardless of lamp types is designed. And this type of ballast has some useful functions such as surge protection, thermal protection, and dimmable function. Moreover the powerline communication skill is also used to transmit a dimming control signal.

This paper deals with single-phase unified power quality conditioner, which aims at the integration of series-active and shunt-active tilter. The series filter is used to compensate for the voltage distortions and the shunt filter is used to provide reactive power and counteract the harmonic current injected by the load. Also, the voltage of the DC link capacitor is controlled to a desired value by the shunt active filter. In order to verify the performance of the proposed conditioner, computer simulations using MATLAB/SIMULINK were demonstrated. The results confirm that the proposed conditioner shows excellent performance to eliminate the harmonics and voltage flickers generated at the singe-phase nonlinear load.

In general, Power SCR(Silicon Controlled Rectifier) is most widely used in Power Plant as well as Industrial field. It has been controlled and operated according to its own control method. Especially, in case of Power plant, it plays a major role in AVR(Automatic Voltage Regulator) or electro chlorination control circuits. Generally, they used in Analog control system at above field. But each SCR current value is different because of load unbalance or switching characteristic variations, it may cause power plant unit trip or system disorder according to SCR element burn out or bad operating condition. Therefore, in this paper a development of 3 phase current balance control unit is described, it gets over the past analog control system limit, uses DSP(Digital signal processor) had high speed response, controls SCR gate firing angle for 3 phase current balance.

The power semiconductor is widely used in the power plant or industrial field because of genealization and enlargement. It has been controlled and operated according to its own control method. Especially in case of Power plant, it plays a major role in AVR(Automatic Voltage Regulator) or electro chlorination control circuits. Generally, they used in Analog control system at above field. But each SCR current value is different because of load unbalance or switching characteristic variations, it may cause power plant unit trip or system disorder according to SCR element burn out or bad operating condition. Therefore, in this paper a development of 3 phase current balance control algorithm is described. it gets over the past analog control system limit, controls SCR gate firing angle for 3 phase current balance.

The control method of Thyristor-controlled Reactor(TCR) is described in this paper for compensating the poor power factor, unbalanced and/or nonlinear load. Also, auxiliary controller such as DC current and power-factor controller is described. The reference current of TCR is calculated from the active and reactive current components for each of the positive and negative sequence components in the load currents. This reactive power control technique was verified by Matlab Simulink and 33Kvar TCR simulator, and will be used in 4.3Mvar TCR system, which will be installed next year at R-Tech Co., located in Po-Hang.

In the industrial motor drive system which is composed of a motor and load connected with a flexible shaft, a torsional vibration is often generated because of the elastic elements in torque transmission. To solve this problem, $H_{\infty}$ controller was designed. In this paper, $H_{\infty}$ control of 2-mass system using $H_{\infty}$ filter for compensating shaft torque is proposed. Pole-zero maps show the validity of proposed controller.

This paper describes a newly developed power conditioner with variable current loop gain. The power conditioner consists of a do-link capacitor and three phase inverter with coupled inductor. This system is very well operated to compensate current harmonics and asymmetries caused by nonlinear load and unbalance loads. The power conditioner shapes the source current sinusoidal in phase with source voltage. A 100kVA power conditioner was built and the controller is realized with DSP Experimental results for many load conditions are presented to verify the performance of the controller.

본 연구에서 제안한 가변 출력 직렬공진 고주파 유도가열시스템은 기존 공진회로 트랜스 1차에 여러 개의 탭 제작과 공진회로의 콘덴서를 직, 병렬로 연결하는 등의 간단한 설계방법으로 주파수와 출력을 가변 시켜 실험함으로서 유도가열 시스템 1대로 다양한 피 가열부품 등에 적용시킬 수 있음을 확인할 수 있었다.

본 논문에서는 최적의 전자식안정기 설계를 위한 중요단계인, 램프의 전기적 모델링을 주제로 다루었으며 특히, 방열특성을 고려하여 고압나트륨 램프의 동작특성을 보다 정확하게 표현하고자 하였다. 이 결과는 PSpice를 사용하여 250W 고압나트륨 램프의 전자식안정기 설계에 적용하였다.

This paper presents a high frequency electronic ballast with high efficiency and high power factor. The proposed ballast have driven by the half bridge inverter which is linked diode rectifier without DC link capacitor. Minimized elements of circuit configurations can make the efficiency of the ballast increase. High input power factor which is up to 0.96 can be achieved and the crest factor of lamp current waveforms is controlled with below 1.75 by using a novel control scheme which has PFM and PWM methods simultaneously. In this paper, the circuit configurations of the proposed ballast and the control schemes are described. The usefulness of the proposed ballast is confirmed with the simulation results.

This paper presents a digital controller of electronic ballast for the metal halide lamp. The proposed controller includes the control algorithm for soft starting, no load protection, overcurrent protection and dimming(or power control). The proposed controller, moreover, has the high frequency modulation scheme and the tracking algorithm to avoid acoustic resonance phenomena. For the math production with the low cost using the ASICs, the proposed controller has been designed with the EPLDs only, without any microprocessor. In this paper, the proposed control algorithms are described and the experimental results of prototype 150W metal halide electronic ballast are presented.

This paper describes the forward type pulse power supply using a Power-MOSFET in the view of commercialization. The principle of basic operating and the operating characteristics of the forward type pulse power supply are estimated by the switching frequency, coupling factor and duty ratio. It is shown that theoretical and experimental results are in good agreement by comparing simulation and experimental results when a lamp type ozonizer can be used as a load. Also, experimental results indicate that the discharge and ozone concentration characteristics of the manufactured pulse power supply is more improved compare to the conventional pulse power supply[5]. This proposed supply show that it can be practically used as a pulse power supply in various environment improvement facilities.

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force using disturbance observer. Based on this estimated adhesive effort, the re-adhesion control is performed to obtain the maximum transfer of the tractive effort.

최근 스위칭 전원장치를 사용하는 PC, UPS, 정류기 및 조명기기등 비선형부하의 증가에 따라 3상 4선식 배전계통에서 평형부하인 경우에도 중성선에 큰 고조파전류가 흘러 계통내 많은 문제를 야기하고 있다. 본 논문에서는 단상인버터에 의한 중성선전류 제어 기술 (6)로서 불평형하에서 기본파의 영상전류에 의해 필터장치에 과부하가 걸리는 것을 방지하기위한 새로운 제어기법을 제안하고 이론에 의한 분석과 모의실험 및 실험에 의하여 타당성을 입증한다.

A single-stage high-power-factor electron ic ballast operating in critical conduction mode is presented in this paper. The proposed topology is based on integration of a boost-like converter and a LCC Type half-bridge serial resonant inverter. The power-factor-correction(PFC) stage is a boost-like converter operating in critical conduction mode for positive and negative half cycle voltage respectively at line frequency (60Hz) so that a high power factor is achieved naturally. The simulated and experimental results for 100w fluorescent lamps operating at 42kHz switching frequency and 220V line voltage have been obtained.

A new low cost single stage high power factor electronic ballast for fluorescent lamps is presented in this paper. The proposed topology is based on integration of two-boost converter and LC type high frequency resonant converter. A ballast is obtained by simple construction, because full bridge rectifier diode is eliminated and simple control circuits is applied. Using two boost converter operating positive and negative half cycle respectively at line frequency (60Hz), operating in discontinuous conduction mode performs high power factor. The simulated and experimental results for 64W fluorescent lamps operating at 45kHz switching frequency and 110V line voltage have been obtained.

전력선통신 변조방식 중 FSK(Frequency Shift Keying)변조방식을 이용하여 컴퓨터와 RS232케이블로 전력선모뎀과 연결하여 컴퓨터의 데이터신호를 전력라인으로 직접 송신할 수 있게 하였으며, 수신부에서 데이터신호를 검출하여 가전기기의 전원을 ON/OFF 하였다.

본 연구는 자계방향 기준 벡터제어 이론에 기초하여 속도 센스리스 벡터제어를 구현한다. 벡터제어는 상태량에 기초한 MRAS (MRAS: Model Reference Adaptive System)방법은 이득정수의 결정이 어려운 결점을 가지고 있다. 여기서는 관측기 이론에 기초하여 2차자속 관측기와 전류센스에서 검출한 전류값으로 속도추정을 행하는 새로운 속도 추정법을 제안한다. 그리고 제안한 방법이 자계 방향 벡터제어 시스템의 실현에 가능성이 있음을 시뮬레이션으로 검토한다.

본 논문은 BLDCM의 센서리스 운전에 관한 것으로 운전속도에 따라 인버터 스위칭 주파수를 적절히 가변함으로서 넓은 속도범위에 서 운전성능과 효율을 개선시켜 센서리스 운전을 향상시킬 수 있는 방법을 제시하였으며 실험을 통하여 유용성을 입증하였다.

This paper presents a detailed study of the reduced-model extended Kalman filter(EKF) for estimating the rotor speed of an induction motor drive. The general structure of the Kalman filter is reviewed and the various system vectors and matrices are defined. By including the rotor speed as a state variable, the EKF equations are established from a discrete two axis model of the three-phase induction motor, using the software MATLAB/Simulink, simulation of the EKF speed estimation algorithm is carried out for an induction motor drive with indirect vector control.

In this paper, describes a rotor speed identification method of induction motor based on the theory of counter EMF MRAS. This method eliminated the pure integrator and we can be expected to rapid responsibility of the speed identification. Therefore, we may improve the initial condition of the integrator and drift problem. The stability of speed estimator is proved on the basis of hyperstability theory. In order to confirm the performance of the proposed system, simulation and experiment is performed.

This paper represents a realization of a fuzzy PI control method for a speed control of BLDC motor. In other words, the gains of the PI controller is tuned by a fuzzy logic controller. Simplified reasoning methods are used for fuzzy reasoning. Fuzzy logic speed controller is designed by using the high performance of DSPchip(TMS320F240). By experiment, it is confirmed that the speed of BLDC motor well follows an command speed in the load variables or speed variables.

제안된 센서리스 구동 알고리즘에서는 역기전력이 구동전원인 한 상의 등가회로로부터 전류성분을 구하고 이때 전류성분이 갖게 되는 위상지연은 회로 시정수를 고려하여 보상해줌으로써 간접적으로 위상지연이 없는 회전자 위치정보를 구하는 방법을 적용하였다. 그리고 실험을 통해서 그 타당성을 제시하였다.

This paper presents the implementation of a positon sensorless vector control system of a PM linear synchronous motor by sliding mode observer based on TMS320F240 DSP controller. Sliding mode observer estimates the secondary velocity and position based on the measurement of current, and it shows very robust characteristic to parameter variation. Therefore, it improves the system performance deterioration caused by system parameter variations. Simulation and experimental considerations are presented to confirm the applicability of sliding mode observer to the sensorless position control of PMLSM.

The Induction motor Vector Control with PI controller has been widely used in industrial application. But PI control difficult in dealing with dynamic speed control, parameter variations, and load disturbances. Therefore, in this paper propose speed control of a induction motor using the PI controller with fuzzy controller. The proposed fuzzy PI controller increases the control performance of the PI controller. Simulation results show that fuzzy PI controller has a good robustness regarding the improper tuned PI controller.

The input voltage of linear Induction motors(LIMs) is involved with the time harmonics because most LIM is driven by inverter. Therefore the equivalent circuit for an inverter-fed LIM has to be modifided to represent every harmonic present in supply voltage. This paper describes that the dynamic characteristic can be used effectively for analyzing the characteristics of a linear induction motor position and speed control.

The effect of sensor faults in DTC based induction motor drives is analyzed and a fault detection problem is treated. An adaptive gain scheduling observer is proposed for the design of DTC controller and a fault detection system. The observer provides not only the estimate of stator flux, a key variable in DTC system, but also the estimates of stator current, rotor speed that are useful for fault detection purpose. Simulations for various type of sensor faults are performed to evaluate the performance of the overall control system and the proposed sensor fault detection scheme.

Synchronous reluctance motors(SynRM) for the application such as an electric vehicle, compressor drives of air conditioner and machine tool spindle drives require a wide field-weakening speed range. In order to improve the efficiency performance in such applications, this paper has examined the loss and the efficiency characteristics of SynRM mainly in the field-weakening speed region over the base speed. The control strategy in order to offer a efficiency optimization operation is shown and the copper and iron losses driven the equivalent circuit model of the machine is minimized. The usefulness of the proposed efficiency optimization control is verified through the SynRM durve system.

Recently, vector control without a speed sensor for an inverter induction motor system has been developed. In this paper describes the vector control system estimates rotor speed based on FMRAS(Flux Model Reference Adaptive System). Because of improving the initial condition and drift problem by pure integrator is eliminated, we can be expected to rapid responsibility of the speed estimation. The stability of speed estimator is proved on the basis of hyperstability theory. Proposed control system used TMS320C31 DSP for high speed processing. The effectiveness of the proposed system is verified by simulation and experimental results. This result shows that the highly characteristic speed estimation and robust character of load regulation.

To obtain a high performance in a direct vector controlled induction machine, it is essential to correct estimation of rotor flux. The accuracy of flux observers for induction machines inherently depends on parameter sensitivity. This paper presents an analysis method for conventional flux observers using parameter Sensitivity. The Parameter sensitivity is defined as the ratio of the percentage change in the system transfer function to the percentage change of the parameter variation. We define the ratio between real flux and estimated flux as the transfer function, and analyzed a parameter sensitivity of this transfer function.

For high performance induction motor drives such as mill drives, elevator, spindle drive, NC and so on, smart speed controls is usually required, that requires a precise current control. This paper is proposes design of fuzzy controller which makes use of the output voltage of the space vector PWM inverter. Also, proposes the performance fuzzy controller for high performance vector control of induction motor drive system. The performance of a fuzzy controller is compared with that of an PI controller in an internal loop. The validity of the proposed technique is confirmed by simulation results for induction motor drive system.

This paper presents a neural network based self-tuning fuzzy PID control scheme for induction motor speed control. The PID controller is being widely used in industrial applications. When continuously used long time, the electric and mechanical parameters of induction motor change, degrading the performance of PID controller considerably. This paper re-analyzes the fuzzy controller as conventional PID controller structure, and proposes a neural network based self-tuning fuzzy PID controller whose scaling factors are adjusted automatically. Proposed scheme is simple in structure and computational burden is small. The simulation using Matlab/Simulink is performed to verify the effectiveness of the proposed scheme.

본 논문에서는 Motorola사의 MPC555마이크로프로세서를 탑재하여 개발한 제어보드가 소개된다. 이 보드를 사용하여 하이브리드 전기자동차의 발전기를 제어하는 실험을 수행하였다. MFC555는 전력시스템 제어에 필요한 다양한 입출력 장치를 내장하고 있어서 통합제어를 위한 one-chip solution을 가능하게 해 준다. MPC555는 내부 플래시 메모리가 비교적 대용량(448kbytes)이고 부동 소수점 연산이 가능하다. 또한 A/D 채널이 32개이고 SPI(Serial Peripheral Interface) 모듈 1개, SCI(Serial Communication Interface) 모듈 2개, CAN(Contol Area Network) 모듈 2개 등의 다양한 통신채널을 내장하고 있다. MPC555는 TPU(Time Processing Unit) 채널 32개로 다양한 timing function을 구현할 수 있게 해 준다. 개발된 제어 보드를 이용하여 하이브리드 전기자동차의 유도발전기 시스템에 대한 축소 시뮬레이션을 수행하였다.

This paper presents a clustering adaptive controller to achieve robustness against parameter variations although it has simple structure and computational simplicity. The presented controller based on optimal fuzzy logic controller has an self-tuning characteristics with clustering. The controller requires no model of the system to be controlled. Simulation results show that the usefulness of the proposed controller.

In switched reluctance motor(SRM) drive, it is necessary to synchronize the stator phase excitation with the rotor position. Therefore, the rotor position information is essential. Usually, optical encoders or resolvers are used to provide the rotor position information. These sensors are expensive and are not suitable for high speed operation. This paper proposes a new encoder for high performance excitation control of SRM. The proposed encoder has complex structures of incremental and absolute encoder. An each phase inductance profile can be synchronized with 4-bit absolute position signal and incremental pulses are used for speed detection. Low cost and simple structure are possible.

본 논문은 스테핑 모터의 구동 중에서 2상 여자모드와 마이크로 스테핑의 주기성이 동일함에 기초하여 32 스텝의 정현파 마이크의 스테핑을 실현하고 그 특성을 연구한 내용이다. 마이크로 스테핑은 스테핑 모터의 스텝각을 크게 세분화하여 구동함으로써 진동과 소음이 적고 부드럽게 구동하고자 하는 방법인데, 본 논문의 정현파 마이크로 스테핑은 종래의 마이크로 스테핑에 비하여 더욱 우수한 저진동 저소음 특성을 나타낸다.

TFM(Transeverse Flux Motor) is switched reluctance motor with new structure of novel design concept based on the high efficiency and power density compare to induction motor used on wide industrial field. This paper realized FWM asymmetric converter drive control system for TFM using IGBT and DSP.

A programmable dymanometer is prosed where the user can define the steady-state and inertial torque-speed characteristic of the load. Rotating machinert can be tested on this dynamometer to determine their transient and steady-state characteristics with a pratical load. The system uses proportional-integrtal(PI)controllers to control a three-phase induction motor using indirect field orientation.

In this paper, the speed control system of induction motor was proposed using vector control algorithm and space voltage vector PWM method to improve the dynamic performance of induction motor. The control system is composed of the PDFF controller for speed control and the current controller using space voltage vector PWM technique. The high-speed calculation and processing for vector control is carried out by TMS320C31 digital signal processor and IPM. The proposed scheme is verified through digital simulations and experiments for 3.7(kw) induction motor and shows good dynamic performance.

Direct torque control(DTC) of AC motor has the fast torque and flux dynamic responses even though it has very simple scheme to implement. DTC is also very simple in its implementation because it needs only two hysteresis comparators and switching vector table for both flux and torque control. The amplitude of hysteresis band greatly influences on the drive performance such as flux and torque ripple, switching frequency and current harmonics. Therefore, authors analysis flux and torque hysteresis bands is suggested considering switching frequency and harmonic distortion of currents.

Generally, the current controller is located inner the whole controller, so the characteristic of the current controller is important in controlling performance of the upper controller. A current control loop in motor control is designed so that it is 10 times faster than the speed control loop of the upper controller. Thus, the current controller with complex control algorithm is not proper. In this paper, the improved current controller using a conventional digital PI controller and feedforward controller for the brushless BC motor is designed.

In this paper ASIC design technique using VHDL is applied to MRAS based speed sensorless control of induction motor. ASIC for MRAS based speed sensorless control is designed through the description of speed estimator using FSM, stator voltage controller, flux angle detector, coordinate transformation, and inverter switching signal output. Finally the above system has been implemented on the FPGA (VERTEX XCV400HQ240). Simulation and experiment have been performed to verify the performance of the designed ASIC.

본 논문은 경량전철차량시스템의 하부장치별로 정의된 목표신뢰도를 바탕으로 제동장치의 구성품에 대한 신뢰도를 예측했다. 신뢰도를 예측하기 위하여 제동장치의 주요 구성품에 대한 모델방법 정의, 국내 외 차량시스템에 사용된 제동장치의 요구신뢰도를 조사 분석 하였다. 신뢰도예측결과는 제동장치의 작동환경에 따라 커다란 차이를 갖고 있다. 본 논문의 신뢰도 예측에 필요한 자료는 신뢰도분석 Tool의 데이터 및 현 차량시스템에 적용된 제품의 데이터를 활용하였다. 향후 차량시스템의 상세설계와 함께 보다 정확한 제동장치의 신뢰성예측이 이루어질 것이다.

We proposed a modularization design technique for implementing software of on-board train control system. We already proved the efficiency of CASE Tool(SCADE) for safety critical software design. The several functions of train are implemented on CASE tool each modules. We divided functions of train into modules based on the modularization design. We used MATLAB for design of on-board train control software. We proved that this technique is more useful for the software design of on-board train control for EMU.

This paper describes the simulation algorithms and user interfaces of the self-developed CaPoDyS which is to simulate the dynamic interaction between catenary and pantograph based on FEM. Also, the reliability of the simulation results are discussed through comparing with the ERRI report.

In this paper, the modified simulation algorithms of the Auto Transformer (AT) feeding electric train were proposed. To obtain terminal voltage of train by using equivalent circuit of the AT feeding system, the iterative method is proposed for which determine the train voltages. The train voltages are iteratively calculated from the system voltage drop and line impedance. In the case study, the proposed method is verified from actual operation data of the Kwa-Chon line. Also it is verified that the proposed method can be extent to the multi-train simulation tool. The terminal voltage of the multi-train can be calculated by using superposition principle and it is easily applied to the proposed method. Therefore, the proposed method can be a solution for the complexity of the circuit analysis in the existing methods.

DC 전기철도 변전소의 정류기 용량선정은 온도상승 제한에 따른 전류정격 결정을 뜻한다. 본 논문에서는 온도등가전력의 개념을 도입하여 정류기의 rms 전류용량을 결정하는 이론적 방법을 제시한다. 또한 기존의 수계산방법과 컴퓨터 시뮬레이션 방법의 비교 검토를 통하여 개선점을 제시하였다.

본 논문은 경량전철차량시스템의 출입문장치에 주어진 목표신뢰도를 바탕으로 출입문장치 구성품별 목표신뢰도를 정의하였으며 출입문 구성품의 목표신뢰도 배분은 출입문의 설계 및 유지보수과정에서 발견된 문제점을 분석하여 작성되었다. 또한 경량전철차량 출입문을 설계, 제작 및 유지보수에 필요한 지침을 마련하였다.

The electrified railway has various power supply schemes. Although the identical trains are operated in same condition and the impedance of track are equal, the genealogy impedance of track is changed according to composition method of feeding scheme. So, the collection voltage of train and supplying power from railway substation are greatly unlike. For simulation of collection voltage and power supply according to feeding scheme, using 6-port network analysis proposed previously simulate collection voltage and supply power according to feeding scheme(Parallel Post feeding system, normal feeding system and tie feeding system) and compare and investigate each characteristics.

This research addresses a new vehicle detecting scheme which uses MR(Megneto Resistive) sensor. A vehicle detector which includes two MR sensors for detecting car presence and speed, sensor voltage amplifiers, signal processor, microprocessor, RF data transceiver and a simple car moving simulator is constructed. From experimental results with the vehicle detector the proposed vehicle detecting scheme was verified.

전철화 선로에 있어서 공동 접지 방식은 Staff 안전과 선로변 전기 설비에 가장 큰 영향을 인가하는 귀선 전류에 따른 문제점을 해결할 수 있는 최상의 방식으로 평가되고 있으며, 이들 접지 시스템의 구성은 기존의 전력 공급 시스템에 기본을 두고, 전철화에 따라 선택된 궤도 회로의 특성에 의해 모든 설계 변수가 변화되는 원리가 적용된다. 본 논문에서는 이러한 견지에 입각하여 궤도 회로에 의한 공동 접지망 구성 요소를 프랑스 철도청(SNCF)의 규정에 의해 분석한 후, 이를 경부선 전철화 구간에 적용하여 관련 설계 변수를 결정하였다.

This paper discusses that the maintenance of the propulsion equipment in railway rolling stock. Condition monitoring of railway equipment is the need for integration of remote condition monitoring with maintenance management strategies. The paper outlines research leading to the design and development of a prototype control and monitoring system for propulsion equipment.

전기철도에서의 급전시스템은 레일을 귀선으로 사용하는 단상급전시스템을 사용하고 있다. 이에 따라 레일로부터 대지로의 누설에 의해 상당한 누설전류가 대지로 흐르게 된다. 대지로 흐르는 이 누설전류는 전자유도에 의해 선로 주변에 설치된 통신 케이블 또는 장치에 영향을 주게 된다. 더욱이 전기차의 견인시스템은 견인전동기를 제어하는데 있어서 스위칭 소자의 개폐에 의한 고조파 전류를 발생하고 있어 대지누설전류에 고조파 전류가 포함되어 흐른다. 본 연구에서는 전기철도 급전시스템에서 통신유도원인 대지누설전류에 따른 고려되어야 할 급전시스템 설계 파라미터를 시뮬레이션을 통하여 검증하였으며, 이 결과가 향후 급전시스템 설계시 기본적인 지침이 되어야 할 것이다.

This paper presents on capacity design of DC-fed-traction system. The system is introduced including a characteristics of train, feeding network configuration, and design method of substation arrangements. Optimal design procedures is described, and program for capacity computation of the system is presented using the nodal equation, K.C.L, K.V.L, Ohm's law and superposition theory. For the proof of the proposed algorithm, we accomplished the simulation of DC traction system for HA-Nam LRT. By considering whole component in DC traction system the conclusion will be much precise.

This paper composes the Electric Railway System with the common grounding based on the 5-port network model. We compare the magnification ratio of harmonic currents according to locations of RC bank(i.e s/s. sp, and pp). It takes a lot of costs to equip the RC-bank at all location. And it is NOT effective that RC-bank is equipped at S/S. Finally, this paper proposes SP as the optimal site of RC-bank aspect reducing harmonic.

In this paper, the diagnosis method for AC traction motor is to reduce their maintenance loads. We tried to apply this method to maintenance of traction motor in railway vehicle. Sample coils for stator of traction motor were tested by accelerative thermal degradation which composed of heat, vibration, moisture, and overvoltage applying. Reliability and expected life were evaluated on the insulation system for 200 class traction motor.

The rubber type AGT system is operated by driverless that signaling is CBTC type. The system function is acomplished exactly to obtain the safety and reliability of system and the system is designed to minimize risk. In order to design the system, the functional analysis is performed. Recently functional analysis is performed by RDD-100 which is used and verified by aerospace, military, etc. Therefore The design tool RDD-100 is used to perform functional analysis in AGT system development project.

This study presents accurate simulation to examine a reason rail potential rise and how to design ground connection(Cross Connection Cable, CCC) and draw up a plan of an optimal buried grounding system according to section.

ProfiBus provides real-time data communication among field devices in the EMU (Electrical Multiple Unit) and TCMS (Train Control Monitoring System). This paper presents an adapt to Train Communication Network for EMU using ProfiBus DP(Decentralized Periphery) mathod, which is the layer 2 DDLM(Direct Data Link Mapper) protocol of ProfiBus.

열차집중제어장치(CTC)를 구성하는 각 장치들의 정보데이터 송수신 및 에러 처리 상황을 효과적으로 감시함으로써, 신호설비의 고장 발생시 이를 신속하게 진단하는 것을 목적으로 하여, 최신의 정보통신 기술 및 컴퓨터를 응용하여 열차집중제어장치의 기능을 체계적으로 점검할 수 있는 시뮬레이터를 개발하기 위한 효과적인 신호 데이터 분석 및 표시기법을 제안한다.

국내 도시철도분야의 정보화는 제품설계부분과 운영/유지보수 분야에 일부 전산화가 이루어져 있으나, 정보의 체계적인 관리 및 표준화가 되지 않아 정보의 효율적인 이용 및 통합관리가 제대로 이루어지지 않고 있다. 본 연구는 국내 도시철도 정보화 분야를 세계적인 경쟁력을 가진 분야로 육성하고 수명주기비용(Life Cycle Cost)을 최소화하여 경제성을 극대화 시킨 도시철도 정비유지체계 정보화 시스템을 개발하기 위한 것이다.

Growing environmental and economic concerns have lead to recent efforts to produce more fuel efficient and lower emissions vehicles. Hybrid Electric Vehicles(ab. HEVs) are the most promising designs to reach these goals. In this paper, We present an of a Power Tra the Hybrid Electric Vehicle(at. PTHEV). We int a different concept of PTHEV than in the pr research of PTHEV. This PTHEV includes benefits of serial(Minimum emission and Max efficiency) and parallel(Maximum Power efficiency by direct drive engine) PTHEV. Also mechanism can avoid driving the engine in the speed regions.

An investigation into power conditioners that interface with photovoltaic array and utilities has been completed. The rating for this investigation is residential system(3-5kW) that interface with a 220V single phase utility connection. As the result of this investigation, a 3kW high frequency PWM IGBT inverter feeding a high frequency isolation transformer with a sinusoidal current wave was selected. The output of the transformer rectified with a diode bridge rectifier four IGBT, used as 60Hz switched, reverse the polarity of the rectified current on every other half cycle of the utility voltage. Even though the high frequency link system used more power semiconductors a net size, weight, and parts cost saying result compared to the other systems due to elimination of 60Hz transformer.

In this paper, the operating characteristics of a 3 kW class grid-interactive photovoltaic(PV) power system was analysed from January 1998 to December 2000. The construction of the PV system includes a DC/AC inverter for grid connection, PV module, and data Monitoring & Acquisition system. The major results of the field test of the 3 kW class grid-interactive PV system showed that the system utilization rate was 13.83% the conversion efficiency of the inverter was 88% at an over half load, and the PV system generated the electricity more then 300 kWh per month.

This paper presents the logic based islanding protection algorithm for distributed resources(DR) which are interconnected with distribution network. Due to the negative impacts from islanding operations of DR on protection, operation and management of distribution system, it is necessary to effectively detect the islanding operations of DR and disconnect it from distribution network rapidly. Generally, it is difficult to detect islanding operation by monitoring only one system parameter. The proposed islanding protection algorithm utilizes multi-criteria, voltage variation, phase displacement frequency variation, the variation of total harmonic distortion(THD) of current; therefore it effectively detects island operation of DR unit. We also verified the efficiency of the proposed algorithm using the radial distribution network of IEEE 34 bus model.

Photovoltaic(PV) power generation system has been extensively studied and watched with keen interest as a clean and renewable power source. On the other hand, because the output power of solar cell is not only unstable but uncontrollable, the maximum power point tracking(MPPT) control is still hot issue with the tracking failure left unsolved under the sudden fluctuation of irradiance. Hence, in this paper, we introduce the mechanism of the tracking failure under the fluctuation of irradiance, and show the simulation results using SPRW(simulation method for PV power generation system using real weather conditions).

Recently, according to developing industry and life style, power consumption have been increased year after year. Currently these much power demand from power consumer weakening the allowable power reverse margin in summer. As on of the remedies about this problem, the small scale grid-connected photovoltaic system is considered for auxiliary power source. Generally, grid-connected inverter have a isolation transformer for electrical isolation from utility. This paper proposed transformerless system topology an inquiry validity simulation.

In this paper, a simple, novel approach is proposed for a variable hysterisis band current controller which uses feedback techniques to achieve constant switching frequency with good dynamic response. The simulation result shows constant switching frequency and consequenctly the load current ripple decrease.

For developing a 100 kW MCFC power generation system. Several design parameters for a fuel cell stack and system analysis results by Cycle Tempo, a processing computer soft ware, were described. Approximately 170 cells are required to generate 100 kW at a current density of $125mA/cm^2$ with $6000cm^2$ cells. An overall heat balance was calculated to predict exit temperature. The 100 kW power is expected only under pressurized operation condition at 3 atm. Recycle of cathode gas by more than 50% is recommended to run the stack at $125mA/cm^2$ and 3 atm. Manifolds should be designed based on gas flow rates for the suggested operating condition. The fuel cell power generation system was designed conceptually with several choices of utilization of anode exhaust gas. Also system efficiency was calculated at various type of system and operation conditions.

Photovoltaic(PV) and hydrogen are the high quality, clean-burning fuel which could replace oil and natural gas for transportation, heating and power generation. If hydrogen is made via PV-powered water electrolysis, it would be possible, in principle, to provide energy on global scale, with essentially no greenhouse gas emission and very low level of local pollution. In this paper, the operation control of PV-SPE system is briefly discussed and the simulation scheme of the system is also proposed.

Hardware and software studies strongly indicate the feasibility of commercially producing a low cost, user-friendly photovoltaic cell curve tracer. The instrument will be used in conjuntion with an IBM compatible PC. The system will show not only the parameters; Voc, Isc, FF, Iop, Vop, that the conventional VI tracer shows but also the internal parasitic resistance and the detail parameters.

본 논문은 Substrate의 온도를 $200(^{\circ}C)$로 유지하며 진공 저항 가열 증착법을 이용하여 ITO/Si 태양전지를 제작한 후 그 전기적 특성을 조사하였다. 전지의 단락전류와 개방전압의 열처리 온도의존성은 약 $450(^{\circ}C)$이상부터 증가하여 $650(^{\circ}C)$부근에서 최대치를 나타내었다. 단락전류와 열처리 시간과의 관계에서는 증착 시간이 15분 정도에서 최대치를 나타내었다. 일정한 태양에너지 조도 하에서 $SnO_2$의 성분비율을 높여감에 따라 전지의 개방전압과 단락전류는 다소 감소한 후 일정한 값으로 안정되는 경향을 나타내었다.

This paper presents a constant power controller for doubly-fed. Induction generators used in wind turbines. When the stator side of the generator is connected to the grid, the generated power depends on the rotor current. To control the rotor current based on it's average value, a cost effective SPC (Slip Power Controller) was developed and is ready for testing with an actual 660KW generator system. Experiment results are presented and discussed.

국내외적으로 배기가스 저감 등 환경규제 강화와 환경의식이 향상되면서 원자력, 석탄, 중유 발전 등은 주변지역의 반대에 직면하여 발전소 건설사업 추진이 순조롭지 못한 실정이다. 또한 석유에너지 자원의 고갈과 국제 고유가 시대에 따라 대체에너지의 개발에 세계 각국이 심혈을 기울이고 있다. 그러나 우리나라의 경우 대규모 수력 발전소 입지를 찾는데는 한계가 있으며, 대부분 개발가능 지점이 15m이하 저낙차의 특징을 갖고 있다. 종래에는 소하천을 가로막아 소수력을 개발하는 것이 주종을 이루었으나, 최근에는 공사비 과다로 인한 경제성 불투명과 각종 주변 지역의 민원으로 개발이 어려워 광역상수도, 하수처리장, 농업용 저수지, 다목적댐 하류 조정지댐 등에 저낙차 유휴에너지를 다각적으로 이용하는 방안이 연구 개발되고 있다. 본 연구에서는 저낙차를 이용한 소수력 발전의 최적설계와 경제성 평가 기법 등을 실 적용한 사례를 중심으로 논하고자 한다.

The purpose of this study is to manufacture and test a thermoelectric generator which converts unused energy from close-at-hand sources, such as garbage incineration heat and industrial exhaust, to electricity. A manufacturing process and the properties of a thermoelectric generator are discussed before simulation the thermal stress and thermal properties of a thermoelectric module located between an aluminum tube and alumina plate. We can design the thermoelectric modules having the good properties of thermoelectric generation. Resistivity of thermoelectric module for thermoelectric generation consisting of 62 cells was $0.15{\sim}0.4{\Omega}$. The maximum power of thermoelectric generator using thermoelectric generation modules can be defined as temperature function, and in this case. It can be analogized the lineal relation between current and voltage characteristics as function of temperature. The thermoelectric generator using 32 thermoelectric modules was assembled with 32 directly connected modules that they constrained for two kinds of heat transfer tube with key joints.

FuelCell/Battery hybrid power systems were studied to develop high efficient zero-emission fuel cell electric vehicles. Fuel cells were used as an auxiliary energy source and batteries were used as a transient power source. The fuel cell system is used to supply the average power demand. Dynamic response of the hybrid systems was simulated using PSPICE program and also tested experimentally. The results can be used to design the interface module and to determine the power requirement between the fuel cell unit and the battery pack.

우리나라는 장기전력수급계획 및 10개년 에너지기본계획, 그리고 최근에 수립된 대체에너지보급 3개년 기본계획의 달성 및 보급확대를 위한 보급시나리오 구성에 따른 보급목표를 설정하였다. 대체에너지 지원규모를 산정하기 위한 방법으로는 대체에너지수요전망에서 산출된 대체에너지원별 전망치를 이용, 지원비율을 책정하여 지원규모를 시산하는 방법이 있으며 또 다른 방법으로는 전망된 수요량을 공급하기 위한 시설 및 장비에 드는 투자비를 산출하여 일정비율을 지원한다고 가정한 다음, 지원규모를 시산하는 방법도 있다. 본 연구에서는 후자의 방법을 통하여 재생전원의 보급목표의 설정과 현재의 설치단가를 기준으로 보급에 필요한 설치비용에 대한 지원규모를 개략적으로 분석하고자 하며, 아울러 정부의 대체에너지 보급목표를 달성하기 위한 지원금액을 추정 하고자 한다.