Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

Offshore wind power converter high‑reliability operation modes and swapping strategy

  • Xiaobiao Wang (School of Electrical Engineering, Southeast University) ;
  • Huafeng Xiao (School of Electrical Engineering, Southeast University) ;
  • Liang Guo (NARI Technology Co., Ltd.) ;
  • Zhongyuan Yao (Huaneng Jiangsu Energy Development Co., Ltd.) ;
  • Chenhui Niu (Huaneng Jiangsu Energy Development Co., Ltd.) ;
  • Ming Cheng (School of Electrical Engineering, Southeast University)
  • Received : 2024.03.28
  • Accepted : 2024.11.18
  • Published : 2025.08.20
⟨ Previous Next ⟩

Abstract

Offshore wind power generation has been widely applied. Generally, the offshore wind farms are far from land. Thus, maintenance is inconvenient and the costs for offshore wind power conversion systems are high. Several offshore wind power converter units are parallel connected to meet power capacity and redundancy requirements. However, operating reliability is easily affected by mistriggered switches from complex electromagnetic interference and sudden drops in output current can occur when the inverter modules switch directly. This paper studies high-reliability operation modes and a swapping strategy for offshore wind power converters to address these issues. Different operating patterns are defined based on the output power of the system. By enabling the power switches of the inverter bridges in an interleaved manner, the working patterns are reconstructed. The short-circuited current is suppressed in the power switches caused by the shoot-through of DC-link capacitors. Moreover, the power switches used in different operating modes are activated synchronously and deactivated asynchronously with the mode-swapping signals to optimize the swapping transitions. Finally, the effectiveness is validated on an experimental platform using dual active neutral-point-clamped inverters connected in parallel.

Keywords

Acknowledgement

Funding was supported by 2022 Jiangsu Carbon Peak and Neutrality Technology Innovation Special Fund (BE2022003).

References

  1. Lee, J., Zhao, F.: Global wind report 2022. GWEC. https://gwec.net/globalwindreport2023/ (2023). Accessed 20 Mar 2024
  2. Catalán, P., Wang, Y., Arza, J., Chen, Z.: A comprehensive overview of power converter applied in high-power wind turbine: key challenges and potential solutions. IEEE Trans. Power Electron. 38(5), 6169–6195 (2023) https://doi.org/10.1109/TPEL.2023.3234221
  3. Liserre, M., Cárdenas, R., Molinas, M., Rodriguez, J.: Overview of multi-MW wind turbines and wind parks. IEEE Trans. Ind. Electron. 58(4), 1081–1095 (2011) https://doi.org/10.1109/TIE.2010.2103910
  4. Blaabjerg, F., Yang, Y., Kim, K.A., Rodriguez, J.: Power electronics technology for large-scale renewable energy generation. Proc. IEEE 111(4), 335–355 (2023) https://doi.org/10.1109/JPROC.2023.3253165
  5. Andresen, B., Birk, J.: A high power density converter system for the Gamesa G10x 4.5 MW wind turbine. In: Proceedings of the European Conference on Power Electronics and Applications, pp. 1–8 (2007)
  6. Abuelnaga, A., Narimani, M., Bahman, A.S.: Power electronic converter reliability and prognosis review focusing on power switch module failures. J. Power Electron. 21(6), 865–880 (2021) https://doi.org/10.1007/s43236-021-00228-6
  7. Zhang, Y., Yuan, X., Al-Akayshee, M.: A reliable medium-voltage high-power conversion system for MWs wind turbines. IEEE Trans. Sustain. Energy 11(2), 859–867 (2020) https://doi.org/10.1109/TSTE.2019.2910501
  8. McDonald, A., Jimmy, G.: Parallel wind turbine powertrains and their design for high availability. IEEE Trans. Sustain. Energy 8(2), 880–890 (2017) https://doi.org/10.1109/TSTE.2016.2627607
  9. Desingu, K., Selvaraj, R., Chelliah, T.R., Khare, D.: Effective utilization of parallel-connected megawatt three-level back-to-back power converters in variable speed pumped storage units. IEEE Trans. Ind. Appl. 55(6), 6414–6426 (2019) https://doi.org/10.1109/TIA.2019.2936365
  10. Senturk, O.S., Helle, L., Munk-Nielsen, S., Rodriguez, P., Teodorescu, R.: Power capability investigation based on electrothermal models of IGBT three-level NPC and ANPC press-pack VSCs for multimegawatt wind turbines. IEEE Trans. Power Electron. 27(7), 3195-3206 (2012) https://doi.org/10.1109/TPEL.2011.2182661
  11. Nabae, A., Takahashi, I., Akagi, H.: A new neutral-point clamped PWM inverter. IEEE Trans. Ind. Appl. 17(5), 518–523 https://doi.org/10.1109/TIA.1981.4503992
  12. Blaabjerg, F., Ma, K.: Wind energy systems. Proc. IEEE 105(11), 2116–2131 (2017) https://doi.org/10.1109/JPROC.2017.2695485
  13. Gontijo, G.F., Kerekes, T., Sera, D., Ricco, M., Mathe, L., Teodorescu, R.: New converter solution with a compact modular multilevel structure suitable for high-power medium-voltage wind turbines. IEEE Trans. Power Electron. 38(2), 2626–2645 (2023) https://doi.org/10.1109/TPEL.2022.3213142
  14. van der Broeck, C.H., Ruppert, L.A., Lorenz, R.D., De Doncker, R.W.: Methodology for active thermal cycle reduction of power electronic modules. IEEE Trans. Power Electron. 34(8), 8213–8229 (2019) https://doi.org/10.1109/TPEL.2018.2882184
  15. Blaabjerg, F., Ma, K.: Modulation methods for three-level neutral point-clamped inverter achieving stress redistribution under moderate modulation index. IEEE Trans. Power Electron. 31(1), 5–10 https://doi.org/10.1109/TPEL.2015.2451158
  16. Choi, U.-M., Blaabjerg, F., Jørgensen, S., Munk-Nielsen, S., Rannestad, B.: Reliability improvement of power converters by means of condition monitoring of IGBT modules. IEEE Trans. Power Electron. 32(10), 7990–7997 (2017) https://doi.org/10.1109/TPEL.2016.2633578
  17. Khan, A.A., Khan, U.A., Ahmed, F., Cha, H., Ahmed, A.S.: Improved NPC inverters without short-circuit and dead-time issues. IEEE Trans. Power Electron. 37(2), 2180–2190 (2022)
  18. Wang, X., Xiao, H., Hua, W., Cheng, M.: A highly reliable three-level neutral-point-clamped inverter with anti-shoot-through capability. IEEE Trans. Ind. Electron. 70(4), 3899–3908 (2023) https://doi.org/10.1109/TIE.2022.3177795
  19. Kim, Y.-J., Kim, S.-M., Lee, K.-B.: Improving DC-link capacitor lifetime for three-level photovoltaic hybrid active NPC inverters in full modulation index range. IEEE Trans. Power Electron. 36(5), 5250–5261 (2021) https://doi.org/10.1109/TPEL.2020.3027670
  20. Hwang, J.H., Halabi, L.M., Ko, Y., et al.: Lifetime-based fault tolerant strategy for three-level hybrid ANPC inverters. J. Power Electron. 23(2), 363–373 (2023) https://doi.org/10.1007/s43236-022-00556-1
  21. Choi, U.-M., Lee, J.-S., Blaabjerg, F., Lee, K.-B.: Open-circuit fault diagnosis and fault-tolerant control for a grid-connected NPC inverter. IEEE Trans. Power Electron. 31(10), 7234–7247 (2016)
  22. Ko, Y., Andresen, M., Buticchi, G., Liserre, M.: Discontinuous modulation-based active thermal control of power electronic modules in wind farms. IEEE Trans. Power Electron. 34(1), 301–310 https://doi.org/10.1109/TPEL.2018.2819423
  23. Du, X., Li, G., Sun, P., Zhou, L., Tai, H.-M.: A hybrid modulation method for lifetime extension of power semiconductors in wind power converters. In: Proceedings of the IEEE Applied Power Electronics Conference and Exposition, pp. 2565–2570 (2015)
  24. Vernica, I., Blaabjerg, F., Ma, K.: Optimal derating strategy of power electronics converter for maximum wind energy production with lifetime information of power devices. IEEE J. Emerg. Sel. Top. Power Electron. 6(1), 267–276 (2018) https://doi.org/10.1109/JESTPE.2017.2745714
  25. Zhang, J., Du, X., Qian, C., Ye, Y., Zhou, J.: Design of reference junction temperature swing of power module for thermal management. IEEE Trans. Power Electron. 38(1), 1132–1143 (2023) https://doi.org/10.1109/TPEL.2022.3201532
  26. Keane, A., Cuffe, P., Diskin, E., Brooks, D., Harrington, P., Hearne, T., et al.: Evaluation of advanced operation and control of distributed wind farms to support efficiency and reliability. IEEE Trans. Sustain. Energy. 3(4), 735–742 (2012) https://doi.org/10.1109/TSTE.2012.2200000
  27. Birk, J., Andresen, B.: Parallel-connected converters for optimizing efficiency, reliability and grid harmonics in a wind turbine. In: Proceedings of the European Conference on Power Electronics and Applications, pp. 1–7 (2007)
  28. Gonzalez, J.I.L., Andresen, B., Birk, J.: Method for operation of a converter system. EP1768223B1 (2021)
  29. Negahdari, A., Yepes, A.G., Doval-Gandoy, J., Toliyat, H.A.: Efficiency enhancement of multiphase electric drives at light-load operation considering both converter and stator copper losses. IEEE Trans. Power Electron. 34(2), 1518–1525 (2019) https://doi.org/10.1109/TPEL.2018.2830310
  30. Adler, J., Orlik, B.: Reduced distortion and increased availability in wind turbines through load dependent operation of parallel inverter units with variable DC link voltage. In: Proceedings of the European Conference on Power Electronics and Applications, pp. 1–9 (2016)
  31. Chen, G., Cai, X.: Adaptive control strategy for improving the efficiency and reliability of parallel wind power converters by optimizing power allocation. IEEE Access 6, 6138–6148 (2018) https://doi.org/10.1109/ACCESS.2018.2789421
  32. Zhang, J., Wang, J., Cai, X.: Active thermal control-based anticondensation strategy in paralleled wind power converters by adjusting reactive circulating current. IEEE J. Emerg. Sel. Top. Power Electron. 6(1), 277–291 (2018) https://doi.org/10.1109/JESTPE.2017.2741447
  33. Yang, Y., Wu, Y., Li, X., Zhao, Z., Zhou, J., He, Z., et al.: Short circuit behavior and voltage redistribution of IGBTs in bridge structures. IEEE Trans. Power Electron. 38(3), 3824–3833 (2023) https://doi.org/10.1109/TPEL.2022.3208592
  34. Wu, Z., Dai, Z., Zhou, J., et al.: SiC IGBT degradation mechanism investigation under HV-H3TRB tests. J. Power Electron. 24(2), 305-315 (2024) https://doi.org/10.1007/s43236-023-00726-9