DOI QR코드

DOI QR Code

Energy injection and free resonance converter for AC-AC inductive power transfer

  • Jianfeng Hong (Mechanical and Electronic Engineering, Xiamen University of Technology) ;
  • Jia Teng (Mechanical and Electronic Engineering, Xiamen University of Technology) ;
  • Jianzhuo Lan (Mechanical and Electronic Engineering, Xiamen University of Technology) ;
  • Qiu Fang (Mechanical and Electronic Engineering, Xiamen University of Technology) ;
  • Xuexiao Chen (The Higher Educational Key Laboratory for Flexible Manufacturing Equipment Integration of Fujian Province, Xiamen Institute of Technology)
  • Received : 2024.04.15
  • Accepted : 2024.09.27
  • Published : 2025.04.20

Abstract

To address the intricate issues of power control and the short-time margin of the switches in inductive power transfer (IPT) systems, a converter based on an energy injection mode and a free resonance mode for AC-AC IPT is proposed. The power source is completely decoupled from the resonant network, allowing power control by adjusting the energy injection time. Additionally, the converter introduces a unique switching control mechanism, ensuring that the soft switching is not restricted to the current zero-crossing point. In addition, the proposed system eliminates the requirement for bulky filtering capacitors on the AC bus, enabling a high output power factor without the need for power factor correction. To validate the characteristics of the proposed converter, an experimental prototype is constructed. By varying the transmission distance of the system from 11 to 14 cm and the load resistance from 20 to 50 Ω, the transfer power can be precisely adjusted throughout the duration of energy injection, and the system achieves a transmission efficiency of over 88%.

Keywords

Acknowledgement

This research was funded by the Natural Science Foundation of Fujian, grant number 2021J05262 and 2022J011247; Science and Technology Support Plan of Fujian, grant number 2022T30612.

References

  1. Ozalevli, E., Femia, N., Di Capua, G., Subramonian, R., Du, D.K., Sankman, J., El Markhi, M.: A cost-effective adaptive rectifier for low power loosely coupled wireless power transfer systems. IEEE Transactions on Circuits and Systems I: Regular Papers. 65, 2318–2329 (2018) https://doi.org/10.1109/TCSI.2017.2780169
  2. Zhang, Z., Pang, H.L., Georgiadis, A., Cecati, C.: Wireless power transfer—an overview. IEEE Trans. Ind. Electron. 66, 1044–1058 (2019) https://doi.org/10.1109/TIE.2018.2835378
  3. Zeng, W., Du, G., Zhou, R., Yang, Z.: Position-independent wireless power transfer system delivering constant power. J. Power Electron. 22, 1812–1823 (2022) https://doi.org/10.1007/s43236-022-00478-y
  4. Li, L., Liu, H., Zhang, H., Xue, W.: Efficient wireless power transfer system integrating with metasurface for biological applications. IEEE Trans. Ind. Electron. 65, 3230–3239 (2018) https://doi.org/10.1109/TIE.2017.2756580
  5. Halim, M.A., Rendon-Hernandez, A.A., Smith, S.E., Arnold, D.P.: Analysis of a dual-transduction receiver for electrodynamic wireless power transfer. IEEE Trans. Power Electron. 37, 7470–7479 (2022) https://doi.org/10.1109/TPEL.2022.3140777
  6. Liu, H., Tan, L., Huang, X., Guo, J., Yan, C., Wang, W.: A topological transformation and hierarchical compensation capacitor control in segmented on-road charging system for electrical vehicles. J. Power Electron. 16, 1621–1628 (2016) https://doi.org/10.6113/JPE.2016.16.4.1621
  7. Gu, C., Qian, Q., Xu, D., Tan, T.: Automatic resonant frequency tracking for dc-LLC based on magnetizing current cancellation. J. Power Electron. 24, 1–8 (2024) https://doi.org/10.1007/s43236-023-00692-2
  8. Kao, S.-K., Hsieh, F.-J.: A fast-locking PLL with all-digital locked-aid circuit. Int. J. Electron. 100, 245–258 (2013) https://doi.org/10.1080/00207217.2012.692631
  9. Tan, P., Song, B., Lei, W., Yin, H., Zhang, B.: Decoupling control of double-side frequency tuning for LCC-S WPT system. IEEE Trans. Ind. Electron. 70, 11163–11173 (2023) https://doi.org/10.1109/TIE.2022.3224139
  10. Wang, Y., Yang, Z., Lin, F., Dong, J., Bauer, P.: Frequency tracking method and compensation parameters optimization to improve capacitor deviation tolerance of the wireless power transfer system. IEEE Trans. Ind. Electron. 70, 12244–12253 (2023) https://doi.org/10.1109/TIE.2022.3232657
  11. Liu, W., Chau, K.T., Lee, C.H.T., Han, W., Tian, X., Lam, W.H.: Full-range soft-switching pulse frequency modulated wireless power transfer. IEEE Trans. Power Electron. 35, 6533–6547 (2020) https://doi.org/10.1109/TPEL.2019.2952573
  12. Yamanokuchi, K., Kusaka, K., Itoh, J.-I.: Three-phase wireless power supply system using a matrix converter. Electron. Commun. Jpn. 106, 12389 (2023) https://doi.org/10.1002/ecj.12389
  13. Wang, Y., Dong, L., Liao, X., Ju, X., Su, S.W., Ma, H.: A pulse energy injection inverter for the switch-mode inductive power transfer system. IEEE Transactions on Circuits and Systems I: Regular Papers. 65, 2330–2340 (2018) https://doi.org/10.1109/TCSI.2017.2773085
  14. Cai, H., Shi, L., Li, Y.: Harmonic-based phase-shifted control of inductively coupled power transfer. IEEE Trans. Power Electron. 29, 594–602 (2014) https://doi.org/10.1109/TPEL.2013.2257865
  15. Chen, L., Hong, J., Lin, Z., Luo, D., Guan, M., Chen, W.: A converter with automatic stage transition control for inductive power transfer. Energies (2020). https://doi.org/10.3390/en13205268
  16. Zhong, W., Hui, S.Y.R.: Charging time control of wireless power transfer systems without using mutual coupling information and wireless communication system[J]. IEEE Trans. Ind. Electron. 64, 228–235 (2016) https://doi.org/10.1109/TIE.2016.2598725
  17. Wu, W., Luo, D., Hong, J., et al.: A six-switch mode decoupled wireless power transfer system with dynamic parameter self-adaption[J]. Electronics 12, 2314 (2023) https://doi.org/10.3390/electronics12102314
  18. Li, H.L., Hu, A.P., Covic, G.A.: A direct AC–AC converter for inductive power-transfer systems[J]. IEEE Trans. Power Electron. 27, 661–668 (2011)
  19. Sallan, J., Villa, J.L., Llombart, A., Sanz, J.F.: Optimal design of icpt systems applied to electric vehicle battery charge. IEEE Trans. Ind. Electron. 56, 2140–2149 (2009) https://doi.org/10.1109/TIE.2009.2015359
  20. Medini, D., Ben-Yaakov, S.: A current controlled variable inductor for high frequency resonant power circuits, in Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition-ASPEC'94. 219–225 (1994)
  21. Nguyen, B.X., et al.: An efficiency optimization scheme for bidirectional inductive power transfer systems. IEEE Trans. Power Electron. 11, 6310–6319 (2015) https://doi.org/10.1109/TPEL.2014.2379676
  22. Li, Y., Liu, S., Zhu, X., et al.: Extension of ZVS region of series–series WPT systems by an auxiliary variable inductor for improving efficiency[J]. IEEE Trans. Power Electron. 36, 7513–7525 (2020)
  23. Budhia, M., Covic, G.A., Boys, J.T.: Design and optimization of circular magnetic structures for lumped inductive power transfer systems. IEEE Trans. Power Electron. 26, 3096–3108 (2011) https://doi.org/10.1109/TPEL.2011.2143730
  24. Bharadwaj, A., Sharma, A., Reddy, C.C.: An unconventional measurement technique to estimate power transfer efficiency in series-series resonant WPT system using s-parameters. IEEE Trans. Instrum. Meas. 71, 1–9 (2022) https://doi.org/10.1109/TIM.2022.3181291
  25. Yang, L., Geng, Z., Jiang, S., Wang, C.: Analysis and design of an S/PS−compensated WPT system with constant current and constant voltage charging. Electronics 11, 1–15 (2022) https://doi.org/10.3390/electronics11091488
  26. Yenil, V., Cetin, S.: Load independent constant current and constant voltage control of LCC-series compensated wireless EV charger. IEEE Trans. Power Electron. 37, 8701-8712 (2022) https://doi.org/10.1109/TPEL.2022.3144160