DOI QR코드

DOI QR Code

An evaluation of the stress redistribution of concrete cable-stayed bridges due to creep, shrinkage, and relaxation effects

  • Tien-Thang Hong (Faculty of Civil Engineering, Thuyloi University) ;
  • Seung-Eock Kim (Department of Civil and Environmental Engineering, Sejong University) ;
  • Duc-Kien Thai (Department of Civil and Environmental Engineering, Sejong University)
  • 투고 : 2022.09.16
  • 심사 : 2024.05.10
  • 발행 : 2025.02.25

초록

The objective of this investigation is to determine the stress redistribution due to the cable stress relaxation, concrete creep and shrinkage of structural members in a concrete cable-stayed bridge. To accomplish such complex analyses, the generalized Maxwell model is used for the cable stress relaxation model of the cable members, whereas the models used for the shrinkage and creep are based on the ACI 209R-92 design code. A computational program is developed to calculate the parameters for the generalized Maxwell model, whereas ABAQUS user subroutines are established to simulate the shrinkage and creep behaviors of concrete members. All the processes are set up as an evaluation system for practical usage. The influence of these factors as well as the simultaneous influence of different factors on the stress redistribution are investigated and evaluated. Moreover, the effect of cable type on stress redistribution is also investigated. The findings of these investigations reveal that the stress values in cable elements increased up to 9.63%, and the redistribution rate increased by up to 34.04% in girder elements and 87.17% in pylon elements. Concrete creep and shrinkage increase the rates of redistribution in structural members, particularly pylons. The findings also show that the cable type with low relaxation rates should be used to minimize the effect of cable stress relaxations.

키워드

과제정보

This research was supported by the National Research Foundation of Korea (NRF) funded by the Korea government (MSIT) (No. 2021R1A2B5B01002577).

참고문헌

  1. ACI 2092R-08 (2008), Guide for Modelling and Calculating Shrinkage and Creep in Harden Concrete (Under Revision by ACI Committee 209), American Concrete Institute, Farmington Hills, MI, USA.
  2. Al-Manaseer, A. and Prado, A. (2015), "Statistical comparisons of creep and shrinkage prediction models using RILEM and NU-ITI databases", ACI Mater. J., 112(6), 829-832. https://doi.org/10.14359/51686982.
  3. ACI Committee 209R (1992), Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures, ACI Committee 209R (Edition), American Concrete Institute, Farmington Hills, MI, USA.
  4. Arockiasamy, M., Chidambaram, S., Amer, A. and Shahawy, M. (2000), "Time-dependent deformations of concrete beams reinforced with CFRP bars", Compos. Part B: Eng., 31(6-7), 577-592. https://doi.org/10.1016/S1359-8368(99)00045-1.
  5. Bakoss, S.L., Gilbert, R.I., Faulkes, K.A. and Pulmano, V.A. (2000), "Long-term deflections of reinforced concrete beams", Indian J. Eng. Mater. Sci., 7(1), 29-34. https://doi.org/10.1680/macr.1982.34.121.203.
  6. CEB-FIP (1990), Evaluation of the Time Dependent Behavior of Concrete, International Federation for Structural Concrete, Laussane, Switzerland.
  7. CECS212-2006 (2006), Technical Specification for Prestressed Steel Structures, China Planning Press, Beijing, China.
  8. Cluley, N.C. and Shepherd, R. (1996), "Analysis of concrete cable-stayed bridges for creep, shrinkage and relaxation effects", Comput. Struct., 58(2), 337-350. https://doi.org/10.1016/0045-7949(95)00131-Y.
  9. Comité Euro-International du Béton (1993), CEB-FIP Model Code 1990, Thomas Telford, London, UK.
  10. Conway, T.A. and Costello, G.A., (1993), "Viscoelastic response of a simple strand", Int. J. Solids Struct., 30(4), 553-567. https://doi.org/10.1016/0020-7683(93)90187-C.
  11. EN 1992-1-1: Eurocode 2 (2004), "Design of concrete structures. Part 1-1: General - common rules for buildings and civil engineering structures", Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, British Standards Institution, London, UK.
  12. GB/T10120-2013 (2013), Metallic Materials-Tensile Stress Relaxation-Method of Test, Ministry of Metallurgical Industry of the People Republic of China, Beijing, China.
  13. Hodhod, O.A., Said, T.E. and Ataya, A.M., (2018), "Prediction of creep in concrete using genetic programming hybridized with ANN", Comput. Concrete, 21(5), 513-523. https://doi.org/10.12989/cac.2018.21.5.513.
  14. ISO 15630-1 (2010), Steel for the Reinforcement and Pre-Stressing of Concrete—Test Methods—Part 1: Reinforcing Bars, Wire Rod and Wire, Italian Board of Standardization (UNI), Milano, Italy.
  15. Ivanco, V., Kmet, S. and Fedorko, G., (2016), "Finite element simulation of creep of spiral strands", Eng. Struct., 117, 220-238. https://doi.org/10.1016/j.engstruct.2016.02.053.
  16. Khalil, M.S., Dilger, W.H. and Ghali, A. (1983), "Time‐dependent analysis of PC cable‐stayed bridges", J. Struct. Eng., 109(8), 1980-1996. https://doi.org/10.1061/(asce)0733-9445(1983)109:8(1980).
  17. Kim, S.H. and Kwak, H.G. (2021), "FE analysis of ultimate strength of circular CFT columns considering creep effect", Comput. Concrete, 28(3), 333-345. https://doi.org/10.12989/cac.2021.28.3.333.
  18. Kmet, S. and Holickova, L. (2004), "Non-linear rheology of tension structural element under single and variable loading history Part II: Creep of steel rope-examples and parametrical study", Struct. Eng. Mech., 18(5), 591-607. https://doi.org/10.12989/sem.2004.18.5.591.
  19. Lalanthi, M.C., Kamatchi, P., Rao, K.B. and Saibabu, S. (2018), "Methodologies for numerical modelling of prestressed concrete box-girder for long term deflection", Comput. Concrete, 21(3), 269-278. https://doi.org/10.12989/cac.2018.21.3.269.
  20. Lozano-Galant, J.A. and Turmo, J. (2014), "An algorithm for simulation of concrete cable-stayed bridges built on temporary supports and considering time dependent effects", Eng. Struct., 79, 341-353. https://doi.org/10.1016/j.engstruct.2014.08.018.
  21. Luebkeman, C., Nilson, A. and Slate, F. (1985), "Sustained load deflection of high strength concrete beams", Departmental Report No. 85-2; Department of Structural Engineering, Cornell University, Ithaca, NY, USA.
  22. Madaj, A. and Siekierski, W. (2019), "Analysis of effects of shrinkage of concrete added to widen RC girder bridge", Comput. Concrete, 23(5), 329-334. https://doi.org/10.12989/cac.2019.23.5.329.
  23. Martins, A.M.B., Simões, L.M.C. and Negrão, J.H.J.O. (2016), "Optimum design of concrete cable-stayed bridges", Eng. Optim., 48(5), 772-791. https://doi.org/10.1080/0305215X.2015.1057057.
  24. Nicholas, W.T. (1989), The Phenomenological Theory of Linear Viscoelastic Behavior: An Introduction, Springer Verlag, Berlin/Heidelberg, Germany.
  25. Paulson, K.A., Nilson, A.H. and Hover, K.C. (1991), "Long-term deflection of high-strength concrete beams", Mater. J., 88(2), 197-206. https://doi.org/10.14359/2008.
  26. Rincon, L.F., Viviescas, A., Osorio, E., Riveros-Jerez, C.A. and Lozano-Galant, J.A. (2021), "Evaluation of time-dependent deflections on balanced cantilever bridges", Comput. Concrete, 28(5), 487-495. https://doi.org/10.12989/cac.2021.28.5.487.
  27. Rossi, P., Tailhan, J.L. and Le Maou, F. (2013), "Comparison of concrete creep in tension and in compression: Influence of concrete age at loading and drying conditions", Cement Concrete Res., 51, 78-84. https://doi.org/10.1016/j.cemconres.2013.04.001.
  28. Sadigh, M.A.S., Paygozar, B., da Silva, L.F.M. and Tahami, F.V. (2019), "Creep deformation simulation of adhesively bonded joints at different temperature levels using a modified power-law model", Polym. Test., 79, 106087. https://doi.org/10.1016/j.polymertesting.2019.106087.
  29. Sherif, A.G. and Dilger, W.H. (1998), "Critical review of CSA A23.3-94 deflection prediction for normal and high strength concrete beams", Can. J. Civil Eng., 25(3), 474-489. https://doi.org/10.1139/l97-106.
  30. Sinha, U.P. and Levinson, D.W. (1992), "Tensile stress relaxation in high-strength spring steel wire", J. Test. Eval., 20(2), 114-120. https://doi.org/10.1520/JTE11908J.
  31. Somja, H. and de Ville de Goyet, V. (2008), "A new strategy for analysis of erection stages including an efficient method for creep analysis", Eng. Struct., 30(10), 2871-2883. https://doi.org/10.1016/j.engstruct.2008.03.015.
  32. Song, W.K. and Kim, S.E. (2007), "Analysis of the overall collapse mechanism of cable-stayed bridges with different cable layouts", Eng. Struct., 29(9), 2133-2142. https://doi.org/10.1016/j.engstruct.2006.11.005.
  33. Tang, H., Wang, D. and Duan, Z. (2020), "New Maxwell creep model based on fractional and elastic-plastic elements", Adv. Civil Eng., 2020(1), 9170706. https://doi.org/10.1155/2020/9170706.
  34. Wang, X., Chen, Z., Liu, H. and Yu, Y. (2018), "Experimental study on stress relaxation properties of structural cables", Constr. Build. Mater., 175, 777-789. https://doi.org/10.1016/j.conbuildmat.2018.04.224.
  35. Washa, G.W. and Fluck, P.G. (1952), "Effect of compressive reinforcement on the plastic flow of reinforced concrete beams", J. Proc., 49(10), 89-108. https://doi.org/10.14359/11806.
  36. Zeren, A. and Zeren, M. (2003), "Stress relaxation properties of prestressed steel wires", J. Mater. Process. Technol., 141(1), 86-92. https://doi.org/10.1016/S0924-0136(03)00131-6.
  37. Zhu, L., Wang, J.J., Li, X., Zhao, G.Y. and Huo, X.J. (2020), "Experimental and numerical study on creep and shrinkage effects of ultra high-performance concrete beam", Compos. Part B: Eng., 184, 107713. https://doi.org/10.1016/j.compositesb.2019.107713.