DOI QR코드

DOI QR Code

Failure probability of corroded RC members using a novel fiber beam-column element formulation

  • Behrouz Akbarian Reshvanlou (Structural Engineering Division, Department of Civil Engineering, University of Zanjan) ;
  • Kiarash Nasserasadi (Structural Health Monitoring Research Lab, Department of Civil Engineering, Faculty of Engineering, University of Zanjan) ;
  • Jamal Ahmadi (Structural Health Monitoring Research Lab, Department of Civil Engineering, Faculty of Engineering, University of Zanjan)
  • 투고 : 2023.06.11
  • 심사 : 2024.05.17
  • 발행 : 2025.01.25

초록

Over the past few years, there has been an increasing emphasis on assessing structures in harsh environments to guarantee their safety and longevity. Nevertheless, precisely modeling the behavior of corroded elements and estimating their capability is still a major hurdle. Current models often depend on oversimplified assumptions, such as the uniform distribution of corrosion in steel bars, which can result in inaccurate forecasts of structural behavior. Through numerical and experimental studies, this research attempts to integrate recent findings on the corrosion distribution of steel bars with structural element modeling by introducing a modified beam-column element in OpenSees. For this purpose, different stochastic distributions of corrosion associated with steel bar area reduction were incorporated into the element by modified fiber modeling formulation. This study also considered the impact of transverse bars on element modeling, which further increased the results' accuracy. The accuracy of the proposed element was evaluated by comparing the modeling results with laboratory observations. The results indicated that the proposed element with suggested area reduction models considerably increases the modeling accuracy compared to the existing techniques based on even corrosion distribution.

키워드

참고문헌

  1. Akbarian Reshvanlou, B., Nasserasadi, K. and Ahmadi, J. (2021), "Modified time-dependent model for flexural capacity assessment of corroded RC elements", KSCE J. Civil Eng., 25(10), 3897-3910. https://doi.org/10.1007/s12205-021-2113-3.
  2. Akbarian Reshvanlou, B., Nasserasadi, K. and Ahmadi, J. (2022), "An innovative location-dependent stochastic model for prediction steel bars area under chloride ion attack in the presence of transverse rebars", Constr. Build. Mater., 333, 127390. https://doi.org/10.1016/j.conbuildmat.2022.127390.
  3. Alipour, A., Shafei, B. and Shinozuka, M. (2011), "Performance evaluation of deteriorating highway bridges located in high seismic areas", J. Bridge Eng., 16(5), 597-611. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000197.
  4. Al-Osta, M.A., Al-Sakkaf, H.A., Sharif, A.M., Ahmad, S. and Baluch, M.H. (2018), "Finite element modeling of corroded RC beams using cohesive surface bonding approach", Comput. Concrete, 22(2), 167-182. https://doi.org/10.12989/cac.2018.22.2.167.
  5. ASTM G1 (1999), Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test, ASTM International, West Conshohocken, PA, USA.
  6. Biondini, F., Camnasio, E. and Palermo, A. (2012), "Life-cycle performance of concrete bridges exposed to corrosion and seismic hazard", ASCE/SEI Structures Congress 2012, Chicago, IL, USA, March.
  7. Biswas, R.K., Iwanami, M., Chijiwa, N., Saito, T. and Malaga-Chuquitaype, C. (2022), "A simplified approach to evaluate cyclic response and seismic fragility of corrosion damaged RC bridge piers", Develop. Built Environ., 12, 100083. https://doi.org/10.1016/j.dibe.2022.100083.
  8. Cheng, H., Li, H.N., Yang, Y.B. and Wang, D.S. (2019), "Seismic fragility analysis of deteriorating RC bridge columns with time-variant capacity index", Bull. Earthq. Eng., 17(7), 4247-4267. https://doi.org/10.1007/s10518-019-00628-x.
  9. Chirdeep, N.R., Chowdary, M.B. and Shekhar, S. (2022), "Influence of corrosion deterioration on lifetime seismic resilience of highway bridges", ASPS Conf. Proc., 1(3), 915-923. https://doi.org/10.38208/acp.v1.602.
  10. Choe, D.E., Gardoni, P., Rosowsky, D. and Haukaas, T. (2008), "Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion", Reliab. Eng. Syst. Saf., 93(3), 383-393. https://doi.org/10.1016/j.ress.2006.12.015.
  11. Coronelli, D., Hanjari, K.Z. and Lundgren, K. (2013), "Severely Corroded RC with Cover Cracking", J. Struct. Eng., 139(2), 221-232. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000633.
  12. Crespi, P., Zucca, M., Valente, M. and Longarini, N. (2022), "Influence of corrosion effects on the seismic capacity of existing RC bridges", Eng. Fail. Anal., 140, 106546. https://doi.org/10.1016/j.engfailanal.2022.106546.
  13. Cui, F., Zhang, H., Ghosn, M. and Xu, Y. (2018), "Seismic fragility analysis of deteriorating RC bridge substructures subject to marine chloride-induced corrosion", Eng. Struct., 155, 61-72. https://doi.org/10.1016/j.engstruct.2017.10.067.
  14. De Domenico, D., Messina, D. and Recupero, A. (2023), "Seismic vulnerability assessment of reinforced concrete bridge piers with corroded bars", Struct. Concrete, 24(1), 56-83. https://doi.org/10.1002/suco.202200378.
  15. Deng, P., Zhang, C., Pei, S. and Jin, Z. (2018), "Modeling the impact of corrosion on seismic performance of multi-span simply-supported bridges", Constr. Build. Mater., 185, 193-205. https://doi.org/10.1016/j.conbuildmat.2018.07.015.
  16. Dizaj, E.A., Madandoust, R. and Kashani, M.M. (2018), "Probabilistic seismic vulnerability analysis of corroded reinforced concrete frames including spatial variability of pitting corrosion", Soil Dyn. Earthq. Eng., 114, 97-112. https://doi.org/10.1016/j.soildyn.2018.07.013.
  17. Ghosh, J. and Padgett, J.E. (2010), "Aging considerations in the development of time-dependent seismic fragility curves", J. Struct. Eng., 136(12), 1497-1511. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000260.
  18. Ghosh, J. and Sood, P. (2016), "Consideration of time-evolving capacity distributions and improved degradation models for seismic fragility assessment of aging highway bridges", Reliab. Eng. Syst. Saf., 154, 197-218. https://doi.org/10.1016/j.ress.2016.06.001.
  19. Guo, A., Yuan, W., Lan, C., Guan, X. and Li, H. (2015), "Time-dependent seismic demand and fragility of deteriorating bridges for their residual service life", Bull. Earthq. Eng., 13(8), 2389-2409. https://doi.org/10.1007/s10518-014-9722-x.
  20. Guo, A., Yuan, W., Li, H. and Li, H. (2018), "Structural strength deterioration of coastal bridge piers considering non-uniform corrosion in marine environments", Earthq. Eng. Eng. Vib., 17(2), 429-444. https://doi.org/10.1007/s11803-018-0451-z.
  21. Guo, X. and Zhang, C. (2019), "Seismic fragility analysis of corroded chimney structures", J. Perform. Constr. Facil., 33(1), 04018087. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001241.
  22. Habibi, S., Ferche, A.C. and Vecchio, F.J. (2022), "Modeling corrosion-damaged reinforced concrete members", ACI Struct. J., 119(1), 169-182. https://doi.org/10.14359/51733011.
  23. Jnaid, F. and Aboutaha, R. S. (2016), "Residual flexural strength of corroded reinforced concrete beams", Eng. Struct., 119, 198-216. https://doi.org/10.1016/j.engstruct.2016.04.018.
  24. Kashani, M.M., Crewe, A.J. and Alexander, N.A. (2013), "Use of a 3D optical measurement technique for stochastic corrosion pattern analysis of reinforcing bars subjected to accelerated corrosion", Corros. Sci., 73, 208-221. https://doi.org/10.1016/j.corsci.2013.03.037.
  25. Kashani, M.M., Lowes, L.N., Crewe, A.J. and Alexander, N.A. (2016), "Computational modelling strategies for nonlinear response prediction of corroded circular RC bridge piers", Adv. Mater. Sci. Eng., 2016, 1-15. https://doi.org/10.1155/2016/2738265.
  26. Kashani, M.M., Maddocks, J. and Dizaj, E.A. (2019), "Residual capacity of corroded reinforced concrete bridge components: State-of-the-art review", J. Bridge Eng., 24(7), 03119001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001429.
  27. Kioumarsi, M.M., Hendriks, M.A.N., Kohler, J. and Geiker, M.R. (2016), "The effect of interference of corrosion pits on the failure probability of a reinforced concrete beam", Eng. Struct., 114, 113-121. https://doi.org/10.1016/j.engstruct.2016.01.058.
  28. Kleiber, C. (2008), "A guide to the Dagum distributions", Modeling Income Distributions and Lorenz Curves, Springer New York, New York, NY, USA.
  29. Li, C., Hao, H., Li, H.N. and Bi, K. (2016), "Seismic fragility analysis of reinforced concrete bridges with chloride induced corrosion subjected to spatially varying ground motions", Int. J. Struct. Stab. Dyn., 16(5), 1550010. https://doi.org/10.1142/S0219455415500108.
  30. Li, C.Q., Yang, S.T. and Saafi, M. (2014), "Numerical simulation of behavior of reinforced concrete structures considering corrosion effects on bonding", J. Struct. Eng., 140(12), 04014092. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001021.
  31. Li, H.N., Cheng, H. and Wang, D.S. (2018), "Time-variant seismic performance of offshore RC bridge columns with uncertainty", Int. J. Struct. Stab. Dyn., 18(12), 1850149. https://doi.org/10.1142/S0219455418501493.
  32. Malerba, P.G., Sgambi, L., Ielmini, D. and Gotti, G. (2017), "Influence of corrosive phenomena on bearing capacity of RC and PC beams", Adv. Concrete Constr., 5(2), 117-143. https://doi.org/10.12989/acc.2017.5.2.117.
  33. McKenna, F. (2011), "OpenSees: A Framework for earthquake engineering simulation", Comput. Sci. Eng., 13(4), 58-66. https://doi.org/10.1109/MCSE.2011.66.
  34. Ni Choine, M., Kashani, M.M., Lowes, L.N., O'Connor, A., Crewe, A.J., Alexander, N.A. and Padgett, J.E. (2016), "Nonlinear dynamic analysis and seismic fragility assessment of a corrosion damaged integral bridge", Int. J. Struct. Integr., 7(2), 227-239. https://doi.org/10.1108/IJSI-09-2014-0045.
  35. Nogueira, C.G., Yoshio, L. and Zacchei, E. (2023), "Deterministic and probabilistic approaches for corrosion in RC structures: A direct proposed model to total service life predictions", Case Stud. Constr. Mater., 18, e01913. https://doi.org/10.1016/j.cscm.2023.e01913.
  36. Ortega, N.F. and Robles, S.I. (2016), "Assessment of residual life of concrete structures affected by reinforcement corrosion", HBRC J., 12(2), 114-122. https://doi.org/10.1016/j.hbrcj.2014.11.003.
  37. Panchireddi, B. and Ghosh, J. (2019), "Cumulative vulnerability assessment of highway bridges considering corrosion deterioration and repeated earthquake events", Bull. Earthq. Eng., 17(3), 1603-1638. https://doi.org/10.1007/s10518-018-0509-3.
  38. Pelle, A., Briseghella, B., Bergami, A.V., Fiorentino, G., Giaccu, G.F., Lavorato, D., Quaranta, G., Rasulo, A. and Nuti, C. (2022), "Time-dependent cyclic behavior of reinforced concrete bridge columns under chlorides-induced corrosion and rebars buckling", Struct. Concrete, 23(1), 81-103. https://doi.org/10.1002/suco.202100257.
  39. Pitilakis, K.D., Karapetrou, S.T. and Fotopoulou, S.D. (2014), "Consideration of aging and SSI effects on seismic vulnerability assessment of RC buildings", Bull. Earthq. Eng., 12(4), 1755-1776. https://doi.org/10.1007/s10518-013-9575-8.
  40. Rao, A.S., Lepech, M.D. and Kiremidjian, A. (2017), "Development of time-dependent fragility functions for deteriorating reinforced concrete bridge piers 1", Struct. Infrastr. Eng., 13(1), 67-83. https://doi.org/10.1080/15732479.2016.1198401.
  41. Rao, A.S., Lepech, M.D., Kiremidjian, A.S. and Sun, X.Y. (2017), "Simplified structural deterioration model for reinforced concrete bridge piers under cyclic loading 1", Struct. Infrastr. Eng., 13(1), 55-66. https://doi.org/10.1080/15732479.2016.1198402.
  42. Shekhar, S., Ghosh, J. and Padgett, J.E. (2018), "Seismic life-cycle cost analysis of ageing highway bridges under chloride exposure conditions: Modelling and recommendations", Struct. Infrastr. Eng., 14(7), 941-966. https://doi.org/10.1080/15732479.2018.1437639.
  43. Shen, J., Gao, X., Li, B., Du, K., Jin, R., Chen, W. and Xu, Y. (2019), "Damage evolution of RC beams under simultaneous reinforcement corrosion and sustained load", Mater., 12(4), 627. https://doi.org/10.3390/ma12040627.
  44. Spacone, E., Filippou, F.C. and Taucer, F.F. (1996a), "Fibre beam-column model for non-linear analysis of R/C frames: Part I. Formulation", Earthq. Eng. Struct. Dyn., 25(7), 711-725. https://doi.org/10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9.
  45. Spacone, E., Filippou, F.C. and Taucer, F.F. (1996b), "Fibre beam-column model for non-linear analysis of R/C frames: Part II. Applications", Earthq. Eng. Struct. Dyn., 25(7), 727-742. https://doi.org/10.1002/(SICI)1096-9845(199607)25:7<727::AID-EQE577>3.0.CO;2-O.
  46. Stewart, M.G. and Al-Harthy, A. (2008), "Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysis", Reliab. Eng. Syst. Saf., 93(3), 373-382. https://doi.org/10.1016/j.ress.2006.12.013.
  47. Tarighat, A. and Zehtab, B. (2016), "Structural reliability of reinforced concrete beams/columns under simultaneous static loads and steel reinforcement corrosion", Arab. J. Sci. Eng., 41(10), 3945-3958. https://doi.org/10.1007/s13369-016-2033-6.
  48. Taucer, F.F., Spacone, E. and Filippou, F.C. (1991), "A fiber beam-column element for seismic response analysis of reinforced concrete structures", Report No. Ucb/Eerc-91/17; Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley, CA, USA.
  49. Titi, A., Bianchi, S., Biondini, F. and Frangopol, D.M. (2018), "Influence of the exposure scenario and spatial correlation on the probabilistic life-cycle seismic performance of deteriorating RC frames", Struct. Infrastr. Eng., 14(7), 986-996. https://doi.org/10.1080/15732479.2018.1438481.
  50. Vu, N.S., Yu, B. and Li, B. (2016), "Prediction of strength and drift capacity of corroded reinforced concrete columns", Constr. Build. Mater., 115, 304-318. https://doi.org/10.1016/j.conbuildmat.2016.04.048.
  51. Yang, S.Y., Song, X.B., Jia, H.X., Chen, X. and Liu, X.L. (2016), "Experimental research on hysteretic behaviors of corroded reinforced concrete columns with different maximum amounts of corrosion of rebar", Constr. Build. Mater., 121, 319-327. https://doi.org/10.1016/j.conbuildmat.2016.06.002.
  52. Yu, X.H., Qian, K., Lu, D.G. and Li, B. (2017), "Progressive collapse behavior of aging reinforced concrete structures considering corrosion effects", J. Perform. Constr. Facil., 31(4), 04017009. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001001.
  53. Yuan, W., Guo, A. and Li, H. (2017), "Seismic failure mode of coastal bridge piers considering the effects of corrosion-induced damage", Soil Dyn. Earthq. Eng., 93, 135-146. https://doi.org/10.1016/j.soildyn.2016.12.002.
  54. Yuan, W., Guo, A., Yuan, W. and Li, H. (2018), "Shaking table tests of coastal bridge piers with different levels of corrosion damage caused by chloride penetration", Constr. Build. Mater., 173, 160-171. https://doi.org/10.1016/j.conbuildmat.2018.04.048.
  55. Yuan, Z., Fang, C., Parsaeimaram, M. and Yang, S. (2017), "Cyclic behavior of corroded reinforced concrete bridge piers", J. Bridge Eng., 22(7), 04017020. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001043.
  56. Zhong, J., Gardoni, P. and Rosowsky, D. (2012), "Seismic fragility estimates for corroding reinforced concrete bridges", Struct. Infrastr. Eng., 8(1), 55-69. https://doi.org/10.1080/15732470903241881.