한국지진공학회논문집 (Journal of the Earthquake Engineering Society of Korea)

  • 제28권6호
  • /
  • Pages.365-372
  • /
  • 2024
  • /
  • 1226-525X(pISSN)
  • /
  • 2234-1099(eISSN)
한국지진공학회 (Earthquake Engineering Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

인터록킹에 의한 강재지하연속벽의 휨성능 개선

Improvement of Flexural Performance of Steel Diaphragm Walls With Interlocking Effects

  • 이재영 (공주대학교 건설환경공학과/(주)가우리안) ;
  • ;
  • 정관우 (공주대학교 건설환경공학과) ;
  • 한신인 ((주)가우리안) ;
  • 정해찬 (공주대학교 건설환경공학과) ;
  • 김두기 (공주대학교 건설환경공학과)
  • Lee, Jae Young (Department of Civil Engineering, Kongju National University/Gaurian. Ltd.) ;
  • Hassan, Md Mehidi (Department of Civil Engineering, Kongju National University) ;
  • Jeong, Gawn Woo (Department of Civil Engineering, Kongju National University) ;
  • Han, Shin In (Gaurian. Ltd.) ;
  • Jeong, Hae Chan (Department of Civil Engineering, Kongju National University) ;
  • Kim, Doo Kie (Department of Civil Engineering, Kongju National University)
  • 투고 : 2024.09.09
  • 심사 : 2024.10.10
  • 발행 : 2024.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

According to the recently revised seismic design standards, seismic design of underground structures is required. Concrete underground outer walls are installed separately from temporary earth retaining walls as permanent underground outer walls. This raises issues of constructability, economy, and space narrowness. Therefore, a steel underground continuous wall is developed to promote construction efficiency, safety, and economy by introducing the off-site construction (OSC) method of underground structures. The steel underground continuous wall will be used as a permanent underground continuous wall along with the temporary earth retaining wall. To this end, it must satisfy structural performance equivalent to or higher than the concrete underground outer wall. The integrity and in-plane shear resistance performance between single panel members must be satisfied to be used as a permanent wall. The interlocking effect through geometric bonding is intended to enhance the bonding effect between these members. Therefore, trapezoidal members were developed, and bending performance tests and analyses of each member were performed to confirm the structural bending performance of these members. The bending performance improvement effect of the combined multiple members was confirmed. As a result, it was confirmed that the integration of members and structural performance was improved due to the interlocking effect of the absence of joints. The seismic design analysis of the demonstration site was performed with these developed members, and it was confirmed that the structural performance was equivalent to or higher than that of the existing RC underground continuous wall. As a result, it was confirmed that the steel underground continuous wall can be used as a permanent underground wall together with the temporary earth retaining wall.

키워드

과제정보

이 연구는 (주)포스코인터내셔널의 '대·중소기업상생협력기금 동반성장투자재원' 사업의 일환으로 지원을 받아 수행되었음.

참고문헌

  1. Lee JY, Hassan HM, Kong BJ, Turja SD, Islam MR, Chakraborty S, Uk KJ, Dong VN, Han SI, Park KY, Kim DK. Design of a steel diaphram wall that can be used as a permanent underground wall. In proceeding of Earthquake Engineering Society of Korea academic conference, Republic of Korea; c2024.
  2. Lee JY, Han SI, Kim DJ, Choi ES, Ok DH. Current status of underground space steel underground continuous wall construction technology and improvement of applicab ility. Ground and Technology, Korean Association of Prifessional Engineers Soil Mechanics & Foundation Engineering 2024;21(1).
  3. Seismic Building Design Code and Commentary, Architectural Institute of Korea, Korean Building Code Center; c2022.
  4. Guidelines for Seismic Design of Building Substructures Rev.1, Architectural Institute of Korea; c2020.
  5. Kong BJ. Seismic Responses of Undergound Diaphragm Wals of Buildings Considering In-Plane and Out-of-Plane Stifnes of Slabs. Master Thesis. Kongju National University; c2024.
  6. Sakai K, Tazaki K. Development and applications of diaphragm walling with special section steel-NS-Box. Tunnelling Underground Space Technol. 2003;18(2-3):283-289.
  7. Jin JH, Seo HS, Kim DH, Park KY, Kim TJ, Lee KG. Experimental evaluation of flexural capacity of KG composite beams using channels. In proceeding of Korean Society of Steel Construction academic conference, Republic of Korea; c2022.
  8. Zhang P, Nagae T, McCormick J, Ikenaga M, Katsuo M, Nakashima M. Friction-based sliding between steel and steel, steel and concrete, and wood and stone. in Proceedings of the 14th World Conference on Earthquake Engineering. Beijing, China; c2008.
  9. Kim DY, Kim JH, Lee JB, Choi H, Lee HY. Introduction and application of pilaster jointed slurry wall system method. Korea Concrete Institute. 2023;35(4):78-83.
  10. NS-BOX Diaphragm Wall Association, Guidelines for Design and Construction of NS-BOX Diaphragm Wall; c1998.
  11. Association, N.-B.D.W., Guidelines for Design and Construction of NS-BOX Diaphragm Wall; c1998.
  12. Tazaki K, Matsui T, Hirai M, Sakai K. Development Process And Application of NS-300 BOX Diaphragm Wall. The Thirteenth International Offshore and Polar Engineering 301 Conference. Honolulu, Hawaii, USA; c2003.
  13. Vedhanth R, Subramanian T. Estimating the elastic modulus and bending stiffness of steel ruler with crack using three-point bending test. Journal of Emerging Investigators. 2023;6(1).
  14. Underground Safety Impact Assessment Standard Manual Journal of Emerging Investigators, Ministry of Land, Infrastructure and Transport; c2023.
  15. Lee JY, Hassan HM, Han SI, Kim DK. Steel Diaphragm Walls with Improved Flexural Performance by Interlocking Effects. In proceeding of Earthquake Engineering Society of Korea academic conference, Republic of Korea; c2024.