Tribology and Lubricants

  • 제40권5호
  • /
  • Pages.151-156
  • /
  • 2024
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

경사형과 계단형 리세스를 갖는 가압형 가스 포일 스러스트 베어링의 하중지지 성능 예측

Predictions of Load Support Performance of a Pressurized Gas Foil Thrust Bearing with Sloped and Stepped Recesses

  • 김남규 (국민대학교 대학원 기계시스템공학과) ;
  • 권용범 (국민대학교 대학원 기계시스템공학과) ;
  • 박찬솔 (국민대학교 대학원 기계시스템공학과) ;
  • 김태호 (국민대학교 기계공학부)
  • Nam Kyu Kim (Graduate School, Dept. of Mechanical Systems Engineering, Kookmin University) ;
  • YongBum Kwon (Graduate School, Dept. of Mechanical Systems Engineering, Kookmin University) ;
  • Chan Sol Park (Graduate School, Dept. of Mechanical Systems Engineering, Kookmin University) ;
  • Tea Ho Kim (School of Mechanical Engineering, Kookmin University)
  • 투고 : 2024.09.24
  • 심사 : 2024.10.24
  • 발행 : 2024.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Gas foil thrust bearings (GFTBs) support axial loads in oil-free, high speed rotating machinery using gas as a lubricant. However, under low-speed and high-load conditions, such a bearing experiences friction, leading to wear and a reduced lifespan. Therefore, a pressurized GFTB (PGFTB) that combines hydrostatic and hydrodynamic lubrication by supplying pressurized gas through the supply hole of the top foil has been developed, and various studies have been conducted. In this study, we develop mathematical models of PGFTBs with sloped and stepped recesses and predict its load support performance. The PGFTB maintains a minimum film thickness of approximately 20 ㎛ at rest (0 rpm), regardless of the type of recess, indicating a sufficient hydrostatic pressure to lift the runner at a low rotor speed. Furthermore, the minimum film thickness increases slightly as the numbers of feed holes in the in- and outward radial directions relative to the centerline of the PGFTB pad increase. These findings highlight the importance of supply hole placement in enhancing load support performance. As the rotor speed increases, the minimum film thickness increases rapidly, regardless of the number of supply holes, and without pressurization, sufficient hydrodynamic pressure is generated to lift the runner upon exceeding a certain rotor speed. When comparing the sloped and stepped recesses, the PGFTB with the sloped groove exhibits a superior overall load support performance.

키워드

과제정보

본 연구는 2024년도 산업통상자원부의 재원으로 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 "AI/ICT 기반 가변형 유체기기 설계, 상태진단을 위한 기반 플랫폼 기술 및 운영관리 시스템 개발" 연구과제(2021202080026D)의 일환으로 수행되었으며, 이에 관계자 여러분께 감사드립니다.

참고문헌

  1. Heshmat, H., Walowit, J. A., Pinkus. O., "Anlaysis of gas lubricated compliant thrust bearings", J. Tribol., Vol.105, No.4, pp. 638-646, 1983.
  2. Kim, T. H., Park, M., Lee, T. W., "Design Optimization of Gas Foil Thrust Bearings for Maximum Load Capacity," J. Tribol., Vol.139, No.3, p.031705, 2017.
  3. Hawng, S., Mehdi, S. M., Kim, T. H., "Static Performance Measurements and Model Predictions of Gas Foil Thrust Bearing with Curved Incline Geometry," Lubricants, Vol.11, p.480, 2023.
  4. Hawng, S., "Effects of External Pressurization on the Static Performance of a Gas Foil Thrust Bearing with Curved Inclined Surfaces," Doctoral Thesis, Division of Mechanics and Design, Kookmin University, Seoul, 2022.
  5. Hawng, S., Kim, D. Y., Kim, T. H., "Effects of Surface Roughness on the Performance of a Gas Foil Thrust Bearing", Tribol. Lubr., Vol.39, No.2, pp.81-85, 2023, https://doi.org/10.9725/kts.2023.39.2.81
  6. Cho, H., Kim, Y., Kwon, Y., Kim, T. H., "Effects of Increasing Ambient Temperatures on the Static Load Performance and Surface Coating of a Gas Foil Thrust Bearing", Tribol. Lubr., Vol.40, No.3, pp.103-110, 2024, https://doi.org/10.9725/kts.2024.40.3.103
  7. Lee, D., Kim, D., "Design and performance prediction of hybrid air foil thrust bearings", J. Eng. Gas Turbines Power, Vol.133, No.4, pp.042501, 2011.
  8. Ebewele, E., Kim, D., Ki, J., "Analytical Study on Hybrid Thrust Foil Bearing, Structural Characterization and Measurement of Static Performance", Tribol. Int., Vol.200, pp.110079, 2024.
  9. Shapiro, A. H. Dynamics and Thermodynamics of Compressible Fluid Flow, The Ronald Press Company, New York, 1954.