반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

고효율 증발원을 이용한 나노박막 제작 및 특성

Fabrication of Nano-thin Film Through High-efficiency Evaporation Source and Analysis of Thin Film Characteristics

  • 김관도 (순천향대학교 스마트모빌리티공학과)
  • Kwan-Do Kim (Dept. of Smart Mobility Engineering, Soonchunhyang University)
  • 투고 : 2024.08.01
  • 심사 : 2024.09.12
  • 발행 : 2024.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

High efficiency evaporation source is developed to perform a vacuum deposition process in which a deposition material is heated and vaporized to eject from a solid state to a gaseous state. In order to obtain a uniform thin film, conditions such as the structure of the effusion cell, the distance between the effusion cell and the substrate, nozzle size, and evaporation angle must be optimized. In this experiment, organic material Alq3 and metal Al thin film deposition process was performed using the effusion cell and thin film characteristics was analyzed.

키워드

참고문헌

  1. Min-Geun Song, Kwan-Soo Kim, Hye In Yang, Seong Keun Kim, Jae-Hyun Kim, Chang-Wook Han, Hyun-Chul Choi, Ramchandra Pode, Jang Hyuk Kwon, "Highly reliable and transparent Al doped Ag cathode fabricated using thermal evaporation for transparent OLED applications", Vol. 76, pp. 105418, 2020. https://doi.org/10.1016/j.orgel.2019.105418
  2. Sang Won Jung, Kwan-Soo Kim, Han-un Park, Raju Lampande, Seong Keun Kim, Jae-Hyeon Kim, Chang-Wook Han, Hyun-Chul Choi, and Jang Hyuk Kwon, "Patternable Semi-Transparent Cathode using Thermal Evaporation for OLED Display Applications", Advanced Electronic Materials, Vol. 7, No. 4, pp.2001101, 2021. https://doi.org/10.1002/aelm.202001101
  3. C.B. Lee, A. Uddin, X. Hu, T.G. Andersson, "Study of Alq3 thermal evaporation rate effects on the OLED", Materials science & engineering B, Vol. 112, No. 1, pp.14-18, 2004. https://doi.org/10.1016/j.msea.2003.09.002
  4. Yong Kun, Yongju Park, Seoungpyung Choi, Jin Jung, Gwangpyo Choi, Hyunwook Ryu, and Kinseong Park, "Deposition Properties of NiCr Thin Films Prepared by Thermal Evaporation", Journal of the Korean Ceramic Society, Vol. 41, No. 6, pp. 450-455, 2004.
  5. B. D. Yao, Y.F. Chan, and N. Wang, "Formation of ZnO nanostructures by a simple way of thermal evaporation", Applied Physics Letters, Vol 81, No. 4, pp. 757-759, 2002. https://doi.org/10.1063/1.1495878
  6. Young Woo Kim, Yongmin Jeon, Eou-Sik Cho and Sang Jik Kwon, "A Study on Vacuum-deposited Transparent OLED to Improve Its Transmittance and Luminescence Characteristics with a Mesh Electrode", Journal of the Semiconductor & Display Technology, Vol. 23, No. 2, pp. 82-86, 2024.
  7. Eung Ki Lee, "Study on Optimization of the Vacuum Evaporation Process for OLED", Journal of the Semiconductor & Display Equipment Technology, Vol. 7, No. 1, pp. 35-40, 2008.
  8. Sung Hoon Jun and Eung Ki Lee, "DSMC Simulation of a Point Cell-source for OLED Deposition Process", Journal of the Semiconductor & Display Technology, Vol. 9, No. 3, pp. 11-16, 2010.
  9. Eung Ki Lee, "Three Dimensional Direct Monte Carlo Simulation on OLED Evaporation Process", Journal of the Semiconductor & Display Equipment Technology, Vol. 8, No. 4, pp. 37-42, 2009.
  10. Eung Ki Lee, "Evaporation Process Modeling for Large OLED Mass-fabrication System", Journal of the Semiconductor & Display Equipment Technology, Vol. 5, No. 4, pp. 29-34, 2006.
  11. Eungki Lee, "Simulation of the thin-film thickness distribution for an OLED thermal evaporation process", Vacuum, Vol. 83, pp. 848-852, 2009. https://doi.org/10.1016/j.vacuum.2008.08.007