대한임베디드공학회논문지 (IEMEK Journal of Embedded Systems and Applications)

대한임베디드공학회 (Institute of Embedded Engineering of Korea)
권호 표지
DOI QR코드

DOI QR Code

차량용 전자 제어 시스템에서 비접촉식 자기장 센서와 이중 버퍼 구조를 이용한 필터링 시간 최적화

Filtering Time Optimization in Vehicle Electronic Control Systems Using a Non-Contact Magnetic Sensor and Dual Buffer Structure

  • 김민중 ;
  • 박대진
  • Minjung Kim (Kyungpook National University) ;
  • Daejin Park (Kyungpook National University)
  • 투고 : 2024.07.10
  • 심사 : 2024.08.13
  • 발행 : 2024.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The automotive industry is transitioning from traditional internal combustion engines to systems powered by motors, batteries, and various electronic control units. Central to this shift is the micro-controller unit, which processes data from various sensors for real-time environmental awareness and control. This paper explores using non-contact magnetic sensors for sensing vehicle inclination as part of a digital twin implementation. Unlike optical or contact sensors, non-contact magnetic sensors offer robust performance in challenging environments, providing consistent and reliable data under varying conditions. To optimize real-time data processing, we propose a double buffer structure to enhance digital signal processing performance in embedded systems. Experiments using a custom sensor-integrated board demonstrate that the double buffer structure with direct memory access-enabled serial peripheral interface significantly reduces data processing time and improves noise reduction filtering. Our results show that the proposed system can greatly enhance the reliability and accuracy of sensor data, crucial for real-time vehicle control systems. In particular, by using the double buffer structure proposed in this paper, it was possible to secure 8.27 times more data compared to raw data, despite performing additional filtering. The techniques outlined have potential applications in various fields, offering enhanced monitoring and optimization capabilities, thus paving the way for more advanced and efficient vehicle control technologies.

키워드

과제정보

본 논문은 교육부의 재원으로 한국연구재단(NRF-2018R1A6A1A03025109, 10%, NRF-2022R1I1A3069260, 10%)의 지원을 받아 수행된 연구임 본 논문은 과학기술정보통신부의 재원으로 정보통신기획평가원 (No. 2021-0-00944, 30%, No. 2022-0-01170, 20%, No. RS-2023-00228970, 30%)의 지원을 받아 수행된 연구임

참고문헌

  1. F. Marchio, B. Vittorelli, R. Colombo, "Automotive Electronics: Application & Technology Megatrends," ESSCIRC 2014 - 40th European Solid State Circuits Conference (ESSCIRC), Venice Lido, Italy, pp. 23-29, 2014.
  2. J. Liu, X. Xiao, H. Li, "Automotive Electronic Control System Unit Design Based on Flexray Bus," 2020 International Conference on Artificial Intelligence and Electromechanical Automation (AIEA), Tianjin, China, pp. 381-384, 2020.
  3. J. H. Oh, Y. H. Yoon, J. K. Kim, H. B. Ihm, S. H. Jeon, T. H. Kim, S. E. Lee, "An FPGA-based Electronic Control Unit for Automotive Systems," 2019 IEEE International Conference on Consumer Electronics (ICCE), Las Vegas, NV, USA, pp. 1-2, 2019.
  4. F. Salewski, S. Kowalewski, "Hardware/Software Design Considerations for Automotive Embedded Systems," in IEEE Transactions on Industrial Informatics, Vol. 4, No. 3, pp. 156-163, 2008.
  5. S. Lee, D. Lee, P. Choi, D. Park, "Efficient Power Consumption Technique of LiDAR Sensor for Controlling Detection Accuracy Based on Vehicle Speed," IEMEK Journal of Embedded Systems and Applications, Vol. 15, No. 5, pp. 215-225, 2020 (in Korean).
  6. T. Chong, D. Park, "Efficiency Low-Power Signal Processing for Multi-Channel LiDAR Sensor-based Vehicle Detection Platform," Journal of the Korea Institute of Information and Communication Engineering, Vol. 25, No. 7, pp. 977-985, 2021 (in Korean).
  7. N. I. Gross, P. Svasta, "Transition to Digital Twin for Automotive Sensor Interfaces Test Equipment," 2023 46th International Spring Seminar on Electronics Technology (ISSE), Timisoara, Romania, pp. 1-5, 2023.
  8. F. Biesinger, M. Weyrich, "The Facets of Digital Twins in Production and the Automotive Industry," 2019 23rd International Conference on Mechatronics Technology (ICMT), Salerno, Italy, pp. 1-6, 2019.
  9. K. V. Pankrashkina, "Non-contact Human Proximity Sensor," 2022 Conference of Russian Young Researchers in Electrical and Electronic Engineering (ElConRus), Saint Petersburg, Russian Federation, pp. 196-199, 2022.
  10. N. Magotra, K. Gorman, A. Cusson, A. Lukomski, "Real-time Energy Efficient Embedded System Development Methodology," 2013 IEEE Digital Signal Processing and Signal Processing Education Meeting (DSP/SPE), Napa, CA, USA, pp. 284-289, 2013.
  11. M. Prokin, V. Ceperkovic, D. Prokin, "Double Buffered Angular Speed Measurement Method for Self-Calibration of Magnetoresistive Sensors," 2023 12th Mediterranean Conference on Embedded Computing (MECO), Budva, Montenegro, pp. 1-4, 2023.
  12. J. Sun, X. Yao, "A Fast Double-Buffering Strategy for Electrophysiological Data Transmission," 2019 International Conference on Machine Learning, Big Data and Business Intelligence (MLBDBI), Taiyuan, China, pp. 9-13, 2019.
  13. X. Luo, Z. Zhang, "Data Recovery from Sub-Nyquist Sampled Signals: Fundamental Limit and Detection Algorithm," 2019 11th International Conference on Wireless Communications and Signal Processing (WCSP), Xi'an, China, pp. 1-6, 2019.
  14. A. B. Alothman Alterkawi, S. W. Sattler, R. Teschl, W. Bosch, "A Reconfigurable Dual-mode Filter in Embedded Suspended Stripline Substrate Technology (ESSS)," 2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), Perugia, Italy, pp. 306-308, 2021.
  15. J. Cai, "Research on Embedded Software Based on Adaptive Filtering Algorithm," 2022 IEEE International Conference on Advances in Electrical Engineering and Computer Applications (AEECA), Dalian, China, pp. 973-979, 2022.