전기전자학회논문지 (Journal of IKEEE)

  • 제28권3호
  • /
  • Pages.279-284
  • /
  • 2024
  • /
  • 1226-7244(pISSN)
  • /
  • 2288-243X(eISSN)
한국전기전자학회 (Institute of Korean Electrical and Electronics Engineers)
권호 표지
DOI QR코드

DOI QR Code

비대칭 인셋 급전을 이용한 원형 편파 마이크로스트립 패치 안테나 설계

Design of Circularly Polarized Microstrip Patch Antenna Using Asymmetric Inset Feeding

  • 박관준 ;
  • 박동국
  • Kwan-Joon Park (Dept. of Electronics and Electrical Inf. Engineering, Korea Maritime & Ocean University) ;
  • Dong-Kook Park (Dept. of Electronics and Electrical Inf. Engineering, Korea Maritime & Ocean University)
  • 투고 : 2024.07.19
  • 심사 : 2024.08.22
  • 발행 : 2024.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 비대칭 인셋 급전 구조를 통해 원형 편파 특성을 갖는 마이크로스트립 패치 안테나를 구현하는 새로운 방법을 제안하고자 한다. 제안하는 방법은 안테나 안으로 삽입되는 비대칭 인셋 슬롯의 길이 차이와 추가적으로 삽입되는 슬롯의 길이를 이용하여, 원형편파 특성을 갖는 안테나를 설계하는 방법이다. 이 접근 방식을 사용하여 두께 1 mm의 FR-4 유전체 기판을 활용하여 위성통신시스템을 위한 S-band 2.4 GHz에서 동작하는 안테나를 설계 및 제작하였다. 측정 결과 2dBi의 이득, 3dB 이하의 축비, 2.35~2.43 GHz에서-10dB 이하의 반사계수를 확인하였다. 이러한 결과를 바탕으로 제안한 방법을 사용하면, 인셋 급전을 이용한 원형 편파 안테나를 구현할 수 있으며, 소형 위성 통신 시스템 및 ISM 대역을 사용하는 다양한 무선 Iot 환경 서비스 응용 분야에 활용이 가능할 것으로 기대된다.

In this paper, we propose a novel method for implementing a microstrip patch antenna with circular polarization characteristics through an asymmetric inset feed structure. The proposed method involves designing an antenna by taking advantage of the length difference of the asymmetric inset slots inserted into the antenna, as well as the lengths of additional slots incorporated into the design to achieve circular polarization characteristics. Using this approach, we designed and fabricated an antenna operating at 2.4 GHz in the S-band for satellite communication systems, utilizing a 1 mm thick FR-4 dielectric substrate. The measurement results confirmed a gain of 2dBi, an axial ratio of less than 3dB, and a reflection coefficient below -10dB in the frequency range of 2.35 to 2.43 GHz. Based on these results, it is expected that by employing the proposed method, circularly polarized antennas utilizing inset feeds can be realised, thereby making them applicable in small satellite communication systems and various wireless IoT environmental service applications that use the ISM band.

키워드

참고문헌

  1. Y. K. Yoon, T. J. Hwang, H. J. Hong, "Trend on policy and technology for utilizing efficiently the radio Resources," Electronics and Telecommunications Research Institute, 2006. DOI: 10.22648/ETRI.2006.J.210408
  2. J. H. Lee, S.M. Kim, K. E. Joung, Y. S. An, Y. D. Kim and D. H. Ha, "A study on design and fabrication of circularly polarized antenna using microstrip patch," 2001 Spring KIMICS 2001 Conference, pp.182-186, 2001, 7.
  3. D. C. Jeon, "Design of ICS repeater antenna using vertically polarized wave in mobile communication of WCDMA," Unpublished doctoral dissertation, CHOSUN University, Gwangju, 2007.
  4. J. P. Hong, B. M. Kim, H. W. Son, Y. K. Cho, "A study on the inset fed rectangular microstrip patch antenna for S-band applications," JKIICE vol.18, no.10, pp.2359-2366t. 2014. DOI: 10.6109/jkiice.2014.18.10.2359
  5. T. H. Jang, Y. H. Han, J. Kim, and C. S. Park, "60GHz wideband low-profile circularly polarized patch antenna with an asymmetric inset," IEEE Antennas and Wireless Propagation Letters, vol. 19, no.1, pp.44-48, 2020. DOI: 10.1109/LAWP.2019.2952405
  6. D. K. Park, "Design of bual-band patch antenna using asymmetric inset feeding," J. Inst. Korean Electr. Electron. Eng., vol.27, no.4, pp.405-410, 2023. DOI: 10.7471/ikeee.2023.27.4.405
  7. V. G Roberto, R. Riccardo, D. Marco, "Single-layer line-fed broadband microstrip patch antenna on thin substrates," Electronics. 2021; 10(1):37. DOI: 10.3390/electronics10010037
  8. D. Bhalla and K. Bansal, "Design of rectangular microstrip patch antenna using inset fed technique," IOSR Journal of Electronics and Communication Engineering, vol.7, no.4, pp.08-13, 2013. DOI: 10.9790/2834-0740813
  9. N. P. Waweru, D. B. O. Konditi and P. K. Langat, "Ariation of input impedance with feeding position in probe and inset-fed microstrip patch antenna," Innovative Systems Design and Engineering, vol.3, no.7, pp.77-85, 2012.
  10. M. A. Matin, and A. I. Sayeed, "design rule for inset-fed rectangular microstrip patch antenna," WSEAS Transactions on Communications, vol.9, pp.63-72, 2010.
  11. D. Kapsidis, M. T. Chryssomallis and C. G. Christodoulou, "An accurate circuit model of a microstrip patch antenna for CAD applications," IEEE Antennas and Propagation Society International Symposium, USNC/CNC/URSI North American Radio Science. Meeting, vol.3, pp.120-123, 2003. DOI: 10.1109/APS.2003.1219804