Geomechanics and Engineering

  • 제38권6호
  • /
  • Pages.611-620
  • /
  • 2024
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A study on slope design at tunnel portal considering impact of blasting

  • Ji-Ung Lee (Department of Architectural Engineering, Chung-Ang University) ;
  • Jee-Hee Jung (Safety Innovation& Disaster Prevention Research Division, Korea Expressway Corporation Research Institute) ;
  • Kang-Hyun Lee (Safety Innovation& Disaster Prevention Research Division, Korea Expressway Corporation Research Institute) ;
  • SangRae Lee (Safety Innovation& Disaster Prevention Research Division, Korea Expressway Corporation Research Institute) ;
  • Nag-Young Kim (Safety Innovation& Disaster Prevention Research Division, Korea Expressway Corporation Research Institute)
  • 투고 : 2023.11.23
  • 심사 : 2024.02.02
  • 발행 : 2024.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The slope stabilization method is constructed on bedrock, but performance degradation occurs during an impact (earthquake, blasting, etc.) after construction, which may affect service life and factor of safety. In particular, the top-down method implies the possibility of damage caused by blasting vibration due to the construction procedure. However, the current blasting design only reflects damage to nearby facilities, so there is a limit in its ability to assess the damage of reinforcement methods caused by blasting vibration within the scope of influence. In this study, we aim to evaluate problems and damage levels caused by close blasting effects on rock-integrated structures, such as panel-type retaining walls, anchor-combined structures, and small nails, which are mainly constructed using the top-down method. We will also analyze factors affecting long-term performance according to changes in conditions after construction, such as tunnel excavation, to establish optimal design measures.

키워드

참고문헌

  1. Ahn, M.S., Ryu C.H., Park, J.N. and Kwun, J.A. (2001), "A study on the safe blast design to increase slope stability", Explo. Blast., 19(1), 85-92. 
  2. Choi, J.S., Lee, J.M. and Jo, M.S. (2006), "A calculation of blasting load using input identification method & evaluation of structure's vibration in numerical analysis", J. Korean Soc. Rock Mech., 16(3), 232-240. 
  3. Deng, D., Lia, L. and Zhao, L. (2019), "Stability analysis of slopes under groundwater seepage and application of charts for optimization of drainage design", Geomech. Eng., 17(2), 181-194. https://doi.org/10.12989/gae.2019.17.2.181. 
  4. DL E&C (1998), Analysis of blasting impact zones and blasting design reports through test blasting, DL E&C, Seoul, Republic of Korea. 
  5. Hu, G., Xia, Y., Zhong, L., Ruan, X. and Li, H. (2023), "Study on collapse mechanism and treatment measures of portal slope of a high-speed railway tunnel", Geomech. Eng., 32(1), 111-123. https://doi.org/10.12989/gae.2023.32.1.111. 
  6. Jin, Y., Kim, D., Jeong, S. and Park, K. (2022), "Prediction of dynamic behavior of full-scale slope based on the reduced scale 1 g shaking table test", Geomech. Eng., 31(4), 423-437. https://doi.org/10.12989/gae.2022.31.4.423. 
  7. K.E.C. (2002), Review of design criteria for tunnel portal sections for environmentally friendly expressway construction, Korea Expressway Corporation, Gimcheon-si, Gyeongsangbuk-do, Republic of Korea. 
  8. K.E.C. (2003), Review of design criteria for tunnel portals, Korea Expressway Corporation, Gimcheon-si, Gyeongsangbuk-do, Republic of Korea. 
  9. K.E.C. (2004), Review and enhancement of design criteria for tunnel portals, Korea Expressway Corporation, Gimcheon-si, Gyeongsangbuk-do, Republic of Korea. 
  10. K.E.C. (2009), Review of vibration management criteria for reinforced soil retaining walls, Korea Expressway Corporation, Gimcheon-si, Gyeongsangbuk-do, Republic of Korea. 
  11. K.E.C. (2019), Review of proximity blasting criteria for retaining wall [00 Expressway], Korea Expressway Corporation, Gimcheon-si, Gyeongsangbuk-do, Republic of Korea. 
  12. K.E.C.R.I. (2017), Approach for selecting optimal slopes for cutting slopes, Korea Expressway Corporation Research Institute, Hwaseong-si, Gyeonggi-do, Republic of Korea. 
  13. Kim, D., Ko, J. and Kim, J. (2023), "Application of UAV images for rainfall-induced slope stability analysis in urban areas", Geomech. Eng., 33(2), 167-174. https://doi.org/10.12989/gae.2023.33.2.167. 
  14. Kim, N.Y. and Lee, K.H. (2021), Damage evaluation of slope stabilization due to blasting, Korea Expressway Corporation Research Institute, Hwaseong-si, Gyeonggi-do, Republic of Korea. 
  15. Lee, H., Kang, C.W. and Ko, J.S. (2011) "A study on prediction of ground vibration by near field blasting", Explo. Blast., 29(2), 32-42. 
  16. Min, H.D., Jeong, M.S., Song, Y.S. and Park, Y.S. (2005), "Blasting design methods considering the characteristics of blasting sites(II)", J. Korean Tunn. Undergr. Sp. Assoc., 7(4), 63-80. 
  17. M.L.I.T. (2010), Road design manual, Ministry of Land, Infrastructure and Transport, Sejong City, Republic of Korea. 
  18. M.L.I.T. (2020), The guideline for tunnel blasting design, construction, and management, Ministry of Land, Infrastructure and Transport, Sejong City, Republic of Korea. 
  19. Moon, H.K. and Shin, J.H. (2008), "Effect of blast-induced vibration on a tunnel", J. Korean Tunn. Undergr. Sp. Assoc., 10(3), 207-219. 
  20. Shin, J.H., Moon, H.K., Choi, K.C. and Kim, T.K. (2009), "Evaluation of the blast-restriction zone to secure tunnel lining safety", J. Korean Tunn. Undergr. Sp. Assoc., 11(1), 85-95. 
  21. Starfield, A.M., Pugliese, J.M. (1968), "Compression waves generated in rock by cylindrical explosive charges: A comparison between a computer model and field measurements", Int. J Rock Mech. Min. Sci., 5(1), 65-77. https://doi.org/10.1016/0148-9062(68)90023-5. 
  22. Tran, A.T.P., Kim, A.R. and Cho, G.C. (2019), "Numerical modeling on the stability of slope with foundation during rainfall", Geomech Eng., 17(1), 109-118. https://doi.org/10.12989/gae.2019.17.1.109.