Geomechanics and Engineering

  • 제38권5호
  • /
  • Pages.497-505
  • /
  • 2024
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic numerical analysis of the effect of tunneling-induced vibration on combined heat and power plant structures under operation

  • Changwon Kwak (Department of Civil and Environmental Engineering, Inha Technical College) ;
  • Mintaek Yoo (Department of Civil and Environmental Engineering, Gachon University) ;
  • Innjoon Park (Department of Civil Engineering, Hanseo University)
  • 투고 : 2023.12.06
  • 심사 : 2024.01.24
  • 발행 : 2024.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

The power plant is a major infrastructure composed of essential machinery such as Turbine Generators (TG), Heat Recovery Steam Generators (HRSG), etc. Particularly, Combined Heat & Power Plants (CHP) are highly efficient power plants that simultaneously produce heat and electricity. Recently, cases have emerged where railway tunnels are being constructed beneath such power plants due to the underground development of urban rail transportation. Therefore, there is a pressing need to assess the impact of vibrations induced by blasting excavation during the construction of railway tunnels beneath the power plant, as well as the vibrations during railway operation, on the major machinery foundations and structures within the power plant. In this study, criteria for evaluating the vibration impact on key vibration-sensitive structures are summarized, and evaluation standards based on international criteria are established. Based on this, the study examines the vibration impact during the blasting excavation method of NATM tunnels beneath the operational power plant. Furthermore, subsequent railway operation, specifically focusing on the impact of train vibrations on Turbine foundations, Pump foundations, and District Heating pipelines using 3D dynamic numerical analysis. The results indicate that vibration values corresponding to up to 97.3% of the evaluation criteria are derived based on the numerical analysis. However, considering the significance of power plant-related structures, additional measures to reduce vibrations are proposed, including further test blasting, alteration of blasting patterns, reducing the charge per delay, or decreasing advance.

키워드

과제정보

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government(MSIT)(2021R1A2C10955891331682007070103).

참고문헌

  1. Article 25, Noise and Vibration Management Act (2023), Ministry of Environment.
  2. Article 20, Paragraph 3, Attachment 8, Enforcement Regulations of the Noise and Vibration Management Act (2023), Ministry of Environment.
  3. Choi, M.J., Kim, H.J. and Kim, B.H. (2017), "The thermodynamic efficiency characteristics of combined cogeneration system of 120 MW", J. Korea Academia-Ind.Cooperation Soc., 18(6), 29-36. https://doi.org/10.5762/KAIS.2017.18.6.29.
  4. Choi, B.H. and Ryu, C.H. (2012), "Consideration on the relation between vibration level and peak particle velocity in regulation of ground vibration", Exp. Blasting, 30(2), 1-8.
  5. Farghaly, A.A. and Kontoni, D-P.N. (2018), "Train induced dynamic response of a pedestrian tunnel under a four-track surface railway for different soil water contents", Geomech. Eng., 16(4), 341-353. https://doi.org/10.12989/gae.2018.16.4.341.
  6. Guan, X., Xu, H., Fu, H., Zhang, W., Li, P. Ding, H., Yu, K. and Zhang, S. (2023), "Vibration characteristics, attenuation law and prediction method in the near field of tunnel blasting", Case Studies Constr. Mater., 19, e02662, https://doi.org/10.1016/j.cscm.2023.e02662.
  7. Hadi, M.A., Alzabeebee, S. and Keawsawasvong, S. (2023), "Three-dimensional finite element analysis of the interference of adjacent moving trains resting on a ballasted railway track system", Geomech. Eng., 32(5), 483-494, https://doi.org/10.12989/gae.2023.32.5.483.
  8. Ihsan, S., Saqib, S., Rashid, H.M.A., Niazi, F.S. and Qureshi, M.U. (2023), "Predicting blast-induced ground vibrations at limestone quarry from artificial neural network optimized by randomized and grid search cross-validation, and comparative analyses with blast vibration predictor models", Geomech. Eng., 35(2), 121-133. https://doi.org/10.12989/gae.2023.35.2.121.
  9. ISO 2631-1:1997 (1997), Mechanical vibration and shock-Evaluation of human exposure to whole-body vibration Part 1: General requirements, International Organization for Standardization.
  10. Kawk, C.W., Park, I.J. and Kim, Y.J. (2023), "Analysis and evaluation of the effect of blast-induced vibration adjacent to industrial facilities", J. Korean Soc. Civil Engineers, 43(4), 459-468. https://doi.org/10.12652/Ksce.2023.43.4.0459.
  11. Kim, Y.M., Lim, H.S. and Jeong, S.S. (2020), "Seismic response of vertical shafts in multi-layered soil using dynamic and pseudo-static analyses", Geomech. Eng., 21(3), 267-277. https://doi.org/10.12989/gae.2020.21.3.267.
  12. Lee, S.J., Kim, B.R., Choi, S.O. and Kim, N.S. (2022), "Evaluation of blasting vibration with center-cut methods for tunnel excavation", Geomech. Eng., 30(5), 423-435. https://doi.org/10.12989/gae.2022.30.5.423.
  13. Ozacar, V. (2018), "New methodology to prevent blasting damages for shallow tunnel", Geomech. Eng., 15(6), 1227-1236. https://doi.org/10.12989/gae.2018.15.6.1227.
  14. Starfield, A.M. and Pugliese, J.M. (1968), "Compression waves generated in rock by cylindrical explosive charges: A comparison between a computer model and field measurements", Int. J. Rock Mech. Min. Sci. Geomech., 5(1), 65-77. https://doi.org/ 10.1016/0148-9062(68)90023-5.
  15. Sunwoo, C. and Ryu, C.H. (2000), "Suggestions for blast vibration monitoring", Exp. Blasting, 18(4), 7-18.