과제정보
This work was supported by Gansu Major Scientific and Technological Special Project (No. 23ZDGH001).
참고문헌
- M.H. Jiang, H.J. Xu, Z.M. Dai, Advanced fission energy program-TMSR nuclear energy system, Bull. Chin. Acad. Sci. 27 (3) (2012) 366-374, https://doi.org/10.3969/j.issn.1000-3045.2012.03.016.
- X.R. Cheng, B.R. Lv, C.Y. Ji, et al., Influence of cantilever ratio of rotor on hydraulic vibration of nuclear main pump, Atomic Energy Sci. Technol. 53 (4) (2019) 673-681, https://doi.org/10.7538/yzk.2018.youxian.0434.
- M. DaqiqShirazi, R. Torabi, A. Riasi, et al., The effect of wear ring clearance on flow field in the impeller sidewall gap and efficiency of a low specific speed centrifugal pump, Proc. IME C J. Mech. Eng. Sci. 232 (17) (2018) 3062-3073, https://doi.org/10.1177/0954406217729420.
- Y. Lu, Z. Wang, R. Zhu, et al., Study on flow characteristics in LBE-cooled main coolant pump under positive rotating condition, Nucl. Eng. Technol. 54 (7) (2022) 2720-2727, https://doi.org/10.1016/j.net.2022.01.023.
- W.J. Cheng, B.Q. Gu, C.L. Shao, A numerical study on the steady flow in molten salt pump under various conditions for improved hydraulic performance, Int. J. Numer. Methods Heat Fluid Flow 27 (8) (2017) 1870-1886, https://doi.org/10.1108/HFF06-2016-0238.
- C. Kang, L. Zhou, W. Wang, et al., Influence of axial vane on inner flow and performance of a molten-salt pump, Fluids Engineering Division Summer Meeting 44403 (2011) 249-255, https://doi.org/10.1115/AJK2011-06049.
- S. Huang, Y. Song, J. Yin, et al., Experimental and numerical investigation on the pressure pulsation in reactor coolant pumps under different inflow conditions, Nucl. Eng. Technol. 55 (4) (2023) 1310-1323, https://doi.org/10.1016/j.nucengdes.2023.112437.
- Y.Y. Hu, D.Z. Wang, Y. Fu, et al., Numerical study on rotordynamic coefficients of the seal of molten salt pump, Nucl. Sci. Tech. 27 (5) (2016) 114, https://doi.org/10.1007/s41365-016-0116-4.
- C. Kang, Y. Zhu, Q. Li, Effects of hydraulic loads and structure on operational stability of the rotor of a molten-salt pump, Eng. Fail. Anal. 117 (2020) 104821, https://doi.org/10.1016/j.engfailanal.2020.104821.
- J.G. Mou, Y. Chen, S.H. Zheng, et al., Research on fluid-structure interaction characteristics of cantilever centrifugal pump, J. Harbin Eng. Univ. 37 (8) (2016) 7, https://doi.org/10.11990/jheu.201506030.
- C. Wang, X.H. He, H.L. Liu, et al., Numerical optimization and thermal analysis of high temperature molten-salt pump radiator, Atomic Energy Sci. Technol. 51 (6) (2017) 1016, https://doi.org/10.7538/yzk.2017.51.06.1016.
- F.P. Incropera, D.P. DeWitt, T.L. Bergman, A.S. Lavine, Fundamentals of Heat and Mass Transfer, Wiley, 2010.
- X.C. Zhang, X. Wang, W. Gong, et al., Stress analysis and optimum design of the heat transport system at molten salt reactor, in: Proceedings of the ASME 2015 Pressure Vessels and Piping Conference. Volume 3: Design and Analysis, ASME, Boston, Massachusetts, USA, July 19-23, 2015, https://doi.org/10.1115/PVP2015-45519. V003T03A019.
- ASME Boiler and Pressure Vessel Code, Section II, Part D, ASME, 2017.
- Y.C. Liu, X. Wang, X.Y. Wang, et al., Analysis of floor response spectra of TMSR-LF1 considering soil-structure interaction, Nucl. Tech. 44 (7) (2021) 8, https://doi.org/10.11889/j.0253-3219.2021.hjs.44.070602.
- D.S. Chawla, R.S. Soni, H.S. Kushwaha, Assessment of operability and structural integrity of a vertical pump for extreme loads, Int. J. Pres. Ves. Pip. 75 (4) (1998) 297-306, https://doi.org/10.1016/S0308-0161(97)00123-3.
- N.H. Kim, J.B. Kim, S.K. Kim, Development of a structural integrity evaluation program for elevated temperature service according to ASME code, Nucl. Eng. Technol. 53 (7) (2021) 2407-2417, https://doi.org/10.1016/j.net.2021.01.020.
- ASME Boiler and Pressure Vessel Code, ASME, 2017. Section III, Division 5.
- ASME Boiler and Pressure Vessel Code, ASME, 2017. Section III, Division 1.