Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of surface sealant on the color stability and whiteness index of single-shade resin composites after staining and bleaching

  • Muhammet Fidan (Department of Restorative Dentistry, Faculty of Dentistry, Usak University) ;
  • Ozhan Yagci (Department of Restorative Dentistry, Faculty of Dentistry, Usak University)
  • Received : 2024.03.11
  • Accepted : 2024.06.18
  • Published : 2024.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Objectives: The aim of the current study was to evaluate the effect of polishing systems and surface sealant on the color stability and whiteness index of single-shade resin composites after staining and bleaching. Materials and Methods: Three single-shade (Omnichroma, Charisma Diamond One, Zenchroma) and one multi-shade (Filtek Z250) materials were tested. From each resin composite, 40 specimens were prepared. The specimens were divided into 4 subgroups (n = 10) according to the surface treatments: 1-step polishing, 1-step + Biscover LV, 2-step polishing, and 2-step polishing + Biscover LV. Color differences (ΔE00) were calculated after being immersed in the coffee solution for 12 days. After the staining, the specimens were immersed in a whitening mouthrinse (Crest-3D White) for 12 hours. Whiteness index differences (ΔWID = WID after staining - WID after bleaching) values were recorded. The generalized linear model was used for analysis (p< 0.05). Results: The lowest and highest ΔE00 values were found for Zenchroma and Charisma Diamond One respectively. Sealed groups indicated higher ΔE00 values than nonsealed groups with significant differences (p = 0.008). The lowest and highest ΔWID values were found for Zenchroma and Charisma Diamond One respectively. Sealed groups indicated lower ΔWID values than nonsealed groups with significant differences (p = 0.022). Conclusions: The use of surface sealant increased the discoloration and showed less whiteness change in resin materials. When the 1-step was compared with the 2-step polishing, the effects on the color stability and whiteness index values of the resin materials were similar.

Keywords

References

  1. Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389-398. https://doi.org/10.1016/j.jdent.2004.10.018
  2. Erturk-Avunduk AT, Aksu S, Delikan E. The effects of mouthwashes on the color stability of resin-based restorative materials. Odovtos-Int J Dent Sc 2021;23:91-102.  https://doi.org/10.15517/ijds.2020.43004
  3. Bayraktar ET, Atali PY, Korkut B, Kesimli EG, Tarcin B, Turkmen C. Effect of modeling resins on microhardness of resin composites. Eur J Dent 2021;15:481-487. https://doi.org/10.1055/s-0041-1725577
  4. Rizzante FA, Bombonatti JS, Vasconcelos L, Porto TS, Teich S, Mondelli RF. Influence of resin-coating agents on the roughness and color of composite resins. J Prosthet Dent 2019;122:332.e1-332.e5. https://doi.org/10.1016/j.prosdent.2019.05.011
  5. Ebaya MM, Ali AI, El-Haliem HA, Mahmoud SH. Color stability and surface roughness of ormocer- versus methacrylate-based single shade composite in anterior restoration. BMC Oral Health 2022;22:430.
  6. Alp CK, Gundogdu C, Ahisha CD. The effect of gastric acid on the surface properties of different universal composites: a SEM study. Scanning 2022;2022:9217802.
  7. Gurgan S, Koc Vural U, Miletic I. Comparison of mechanical and optical properties of a newly marketed universal composite resin with contemporary universal composite resins: an in vitro study. Microsc Res Tech 2022;85:1171-1179. https://doi.org/10.1002/jemt.23985
  8. Catelan A, Suzuki TY, Becker F Jr, Briso AL, Dos Santos PH. Influence of surface sealing on color stability and roughness of composite submitted to ultraviolet-accelerated aging. J Investig Clin Dent 2017;8:e12203.
  9. Lee YK, Powers JM. Combined effects of staining substances on resin composites before and after surface sealant application. J Mater Sci Mater Med 2007;18:685-691. https://doi.org/10.1007/s10856-006-0011-3
  10. Korkut B, Bud M, Kukey P, Sancakli HS. Effect of surface sealants on color stability of different resin composites. Med Pharm Rep 2022;95:71-79. https://doi.org/10.15386/mpr-1973
  11. Gomleksiz S, Gomleksiz O. The effect of contemporary finishing and polishing systems on the surface roughness of bulk fill resin composite and nanocomposites. J Esthet Restor Dent 2022;34:915-923. https://doi.org/10.1111/jerd.12874
  12. Guler AU, Guler E, Yucel AC, Ertas E. Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci 2009;17:108-112. https://doi.org/10.1590/S1678-77572009000200007
  13. Catelan A, Briso AL, Sundfeld RH, Goiato MC, dos Santos PH. Color stability of sealed composite resin restorative materials after ultraviolet artificial aging and immersion in staining solutions. J Prosthet Dent 2011;105:236-241. https://doi.org/10.1016/S0022-3913(11)60038-3
  14. Fidan M, Tuncdemir MT. Effect of whitening mouthrinses on color change, whiteness change, surface roughness, and hardness of stained resin composites. Am J Dent 2023;36:25-30.
  15. Harorli OT, Barutcigil C. Color recovery effect of commercial mouth rinses on a discolored composite. J Esthet Restor Dent 2014;26:256-263. https://doi.org/10.1111/jerd.12107
  16. Schmitt VL, Nahsan FPS, Naufel FS, Vaez SC, Andrade GSD, Baseggio W, et al. Polishing techniques effect on microhybrid, nanohybrid and nanofilled composites color and surface roughness stability. Biosci J 2016;32:262-271. https://doi.org/10.14393/BJ-v32n1a2016-29657
  17. de Carvalho Justo AC, de Assuncao IV, Borges BC, da Costa GD. Impact of additional polishing on the roughness and surface morphology of dental composite resins. Rev Port Estomatol Med Dent Cir Maxilofac 2016;57:74-81. https://doi.org/10.1016/j.rpemd.2016.03.004
  18. St-Pierre L, Martel C, Crepeau H, Vargas MA. Influence of polishing systems on surface roughness of composite resins: polishability of composite resins. Oper Dent 2019;44:E122-E132. https://doi.org/10.2341/17-140-L
  19. Dede DO, Sahin O, Koroglu A, Yilmaz B. Effect of sealant agents on the color stability and surface roughness of nanohybrid composite resins. J Prosthet Dent 2016;116:119-128. https://doi.org/10.1016/j.prosdent.2015.11.024
  20. Zimmerli B, Koch T, Flury S, Lussi A. The influence of toothbrushing and coffee staining on different composite surface coatings. Clin Oral Investig 2012;16:469-479.  https://doi.org/10.1007/s00784-011-0522-2
  21. Doray PG, Eldiwany MS, Powers JM. Effect of resin surface sealers on improvement of stain resistance for a composite provisional material. J Esthet Restor Dent 2003;15:244-249. https://doi.org/10.1111/j.1708-8240.2003.tb00292.x
  22. Halacoglu DM, Yamanel K, Basaran S, Tuncer D, Celik C. Effects of staining and bleaching on a nanohybrid composite with or without surface sealant. Eur J Dent 2016;10:361-365. https://doi.org/10.4103/1305-7456.184148
  23. Attar N. The effect of finishing and polishing procedures on the surface roughness of composite resin materials. J Contemp Dent Pract 2007;8:27-35. https://doi.org/10.5005/jcdp-8-1-27
  24. Ruschel VC, Bona VS, Baratieri LN, Maia HP. Effect of surface sealants and polishing time on composite surface roughness and microhardness. Oper Dent 2018;43:408-415. https://doi.org/10.2341/17-048-L
  25. Domingos PA, Garcia PP, Oliveira AL, Palma-Dibb RG. Composite resin color stability: influence of light sources and immersion media. J Appl Oral Sci 2011;19:204-211. https://doi.org/10.1590/S1678-77572011000300005
  26. Rohym S, Tawfeek HE, Kamh R. Effect of coffee on color stability and surface roughness of newly introduced single shade resin composite materials. BMC Oral Health 2023;23:236.
  27. Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015;27 Supplement 1:S1-S9. https://doi.org/10.1111/jerd.12149
  28. Paravina RD, Perez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: a comprehensive review of clinical and research applications. J Esthet Restor Dent 2019;31:103-112. https://doi.org/10.1111/jerd.12465
  29. Miranda DA, Bertoldo CE, Aguiar FH, Lima DA, Lovadino JR. Effects of mouthwashes on Knoop hardness and surface roughness of dental composites after different immersion times. Braz Oral Res 2011;25:168-173. https://doi.org/10.1590/S1806-83242011000200012
  30. Perez MM, Ghinea R, Rivas MJ, Yebra A, Ionescu AM, Paravina RD, et al. Development of a customized whiteness index for dentistry based on CIELAB color space. Dent Mater 2016;32:461-467. https://doi.org/10.1016/j.dental.2015.12.008
  31. Perez MM, Herrera LJ, Carrillo F, Pecho OE, Dudea D, Gasparik C, et al. Whiteness difference thresholds in dentistry. Dent Mater 2019;35:292-297. https://doi.org/10.1016/j.dental.2018.11.022
  32. Paolone G, Formiga S, De Palma F, Abbruzzese L, Chirico L, Scolavino S, et al. Color stability of resin-based composites: staining procedures with liquids-a narrative review. J Esthet Restor Dent 2022;34:865-887. https://doi.org/10.1111/jerd.12912
  33. Soares LE, Cesar IC, Santos CG, De Cardoso AL, Liporoni PC, Munin E, et al. Influence of coffee on reflectance and chemistry of resin composite protected by surface sealant. Am J Dent 2007;20:299-304.
  34. Sabatini C, Campillo M, Aref J. Color stability of ten resin-based restorative materials. J Esthet Restor Dent 2012;24:185-199. https://doi.org/10.1111/j.1708-8240.2011.00442.x
  35. Kaizer MR, de Oliveira-Ogliari A, Cenci MS, Opdam NJ, Moraes RR. Do nanofill or submicron composites show improved smoothness and gloss? A systematic review of in vitro studies. Dent Mater 2014;30:e41-e78. https://doi.org/10.1016/j.dental.2014.01.001
  36. Ercin O, Kopuz D. The visual and instrumental analyses of different single-shade resin composites. Odovtos-Int J Dent Sc 2024;26:54-64.
  37. Spina DR, Grossi JR, Cunali RS, Baratto Filho F, da Cunha LF, Gonzaga CC, et al. Evaluation of discoloration removal by polishing resin composites submitted to staining in different drink solutions. Int Sch Res Notices 2015;2015:853975.
  38. de Livi GJ, Santana TR, Braganca RM, de Braganca Garcez RM, Faria-E-Silva AL. The role of interface distance and underlying substrate on the color adjustment potential of single-shade composites. J Esthet Restor Dent 2023;35:1279-1285. https://doi.org/10.1111/jerd.13104
  39. Yap AU, Yap SH, Teo CK, Ng JJ. Finishing/polishing of composite and compomer restoratives: effectiveness of one-step systems. Oper Dent 2004;29:275-279.