Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Semi-analytical stability behavior of composite concrete structures via modified non-classical theories

  • Luxin He (Beijing No. 5 Construction Engineering Group Co., Ltd.) ;
  • Mostafa Habibi (Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences) ;
  • Majid Khorami (UTE University, Faculty of Architecture and Urbanism, Architecture Department)
  • Received : 2023.09.10
  • Accepted : 2024.07.28
  • Published : 2024.04.25
⟨ Previous Next ⟩

Abstract

Cantilever structures demonstrate diverse nonlocal effects, resulting in either stiffness hardening or dynamic softening behaviors, as various studies have indicated. This research delves into the free and forced vibration analysis of rotating nanoscale cylindrical beams and tubes under external dynamic stress, aiming to thoroughly explore the nonlocal impact from both angles. Utilizing Euler-Bernoulli and Reddy beam theories, in conjunction with higher-order tube theory and Hamilton's principle, nonlocal governing equations are derived with precise boundary conditions for both local and nonlocal behaviors. The study specifically examines two-dimensional functionally graded materials (2D-FGM), characterized by axially functionally graded (AFG) and radial porosity distributions. The resulting partial differential equations are solved using the generalized differential quadrature element method (GDQEM) and Newmark-beta procedures to acquire time-dependent results. This investigation underscores the significant influence of boundary conditions when nonlocal forces act on cantilever structures.

Keywords

References

  1. Abouelregal, A.E., Ahmad, H., Gepreeld, K.A. and Thounthong, P. (2021), "Modelling of vibrations of rotating nanoscale beams surrounded by a magnetic field and subjected to a harmonic thermal field using a state-space approach", Eur. Phys. J. Plus, 136(3), 268. https://doi.org/10.1140/epjp/s13360-021-01257-7 
  2. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., Al-Furjan, M. and Chen, G. (2020), "Critical temperature and frequency characteristics of GPLs-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251 
  3. Afshari, B.M., Mirjavadi, S.S. and Barati, M.R. (2022), "Investigating nonlinear static behavior of hyperelastic plates using three-parameter hyperelastic model", Adv. Concrete Constr., Int. J., 13(5), 377-384. https://doi.org/10.12989/acc.2022.13.5.377 
  4. Al-Furjan, M., Alzahrani, B., Shan, L., Habibi, M. and Jung, D.W. (2020a), "Nonlinear forced vibrations of nanocomposite-reinforced viscoelastic thick annular system under hygrothermal environment", Mech. Based Des. Struct. Mach., 50(11), 4021-4047. https://doi.org/10.1080/15397734.2020.1824795 
  5. Al-Furjan, M., Bolandi, S.Y., Shan, L., Habibi, M. and Jung, D.w. (2020b), "On the vibrations of a high-speed rotating multi-hybrid nanocomposite reinforced cantilevered microdisk", Mech. Based Des. Struct. Mach., 50(12), 4157-4185. https://doi.org/10.1080/15397734.2020.1828098 
  6. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2020c), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990 
  7. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020d), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 38, 3675-3697. https://doi.org/10.1007/s00366-020-01177-7 
  8. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2020e), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257, 113146. https://doi.org/10.1016/j.compstruct.2020.113146 
  9. Al-Furjan, M., Habibi, M., Chen, G., Safarpour, H., Safarpour, M. and Tounsi, A. (2020f), "Chaotic oscillation of a multi-scale hybrid nano-composites reinforced disk under harmonic excitation via GDQM", Compos. Struct., 252, 112737. https://doi.org/10.1016/j.compstruct.2020.112737 
  10. Al-Furjan, M., Habibi, M., Chen, G., Safarpour, H., Safarpour, M. and Tounsi, A. (2020g), "Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM", Eng. Comput., 38, 219-242. https://doi.org/10.1007/s00366-020-01144-2 
  11. Al-Furjan, M., Habibi, M., Ebrahimi, F., Chen, G., Safarpour, M. and Safarpour, H. (2020h), "A coupled thermomechanics approach for frequency information of electrically composite microshell using heat-transfer continuum problem", Eur. Phys. J. Plus, 135(10), 1-45. https://doi.org/10.1140/epjp/s13360-020-00764-3 
  12. Al-Furjan, M., Habibi, M., Ebrahimi, F., Mohammadi, K. and Safarpour, H. (2020i), "Wave dispersion characteristics of high-speed-rotating laminated nanocomposite cylindrical shells based on four continuum mechanics theories", Waves Random Complex Media, 32(4), 1599-1625. https://doi.org/10.1080/17455030.2020.1831099 
  13. Al-Furjan, M.S.H., Habibi, M., Ni, J., Jung, D.W. and Tounsi, A. (2020j), "Frequency simulation of viscoelastic multi-phase reinforced fully symmetric systems", Eng. Comput., 38, 3725-3741. https://doi.org/10.1007/s00366-020-01200-x 
  14. Al-Furjan, M., Habibi, M. and Safarpour, H. (2020k), "Vibration control of a smart shell reinforced by graphene nanoplatelets", Int. J. Appl. Mech., 12(06), 2050066. https://doi.org/10.1142/S1758825120500660 
  15. Al-Furjan, M., Habibi, M., Shan, L. and Tounsi, A. (2020l), "On the vibrations of the imperfect sandwich higher-order disk with a lactic core using generalize differential quadrature method", Compos. Struct., 257, 113150. https://doi.org/10.1016/j.compstruct.2020.113150 
  16. Al-Furjan, M., Habibi, M., Won Jung, D., Chen, G., Safarpour, M. and Safarpour, H. (2020m), "Chaotic responses and nonlinear dynamics of the graphene nanoplatelets reinforced doubly-curved panel", Eur. J. Mech-A/Solids, 85, 104091. https://doi.org/10.1016/j.euromechsol.2020.104091 
  17. Al-Furjan, M., Habibi, M., Won Jung, D., Sadeghi, S., Safarpour, H., Tounsi, A. and Chen, G. (2020n), "A computational framework for propagated waves in a sandwich doubly curved nanocomposite panel", Eng. Comput., 38, 1679-1696. https://doi.org/10.1007/s00366-020-01130-8 
  18. Al-Furjan, M., Habibi, M., Won Jung, D. and Safarpour, H. (2020o), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 257, 113152. https://doi.org/10.1016/j.compstruct.2020.113152 
  19. Al-Furjan, M., Habibi, M., Won Jung, D., Safarpour, H. and Safarpour, M. (2020p), "On the buckling of the polymer-CNT-fiber nanocomposite annular system under thermo-mechanical loads", Mech. Based Des. Struct. Mach., 50(12), 4208-4228. https://doi.org/10.1080/15397734.2020.1830106 
  20. Al-Furjan, M., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2020q), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Semi-numerical and finite element modeling", Thin-Wall. Struct., 159, 107242. https://doi.org/10.1016/j.tws.2020.107242. 
  21. Al-Furjan, M., Mohammadgholiha, M., Alarifi, I.M., Habibi, M. and Safarpour, H. (2020r), "On the phase velocity simulation of the multi curved viscoelastic system via an exact solution framework", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-020-01152-2. 
  22. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020s), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis", Thin-Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111 
  23. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020t), "Wave propagation simulation in an electrically open shell reinforced with multi-phase nanocomposites", Eng. Comput., 38, 353-369. https://doi.org/10.1007/s00366-020-01167-9 
  24. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H., Jung, D.W. and Tounsi, A. (2020u), "On the wave propagation of the multi-scale hybrid nanocomposite doubly curved viscoelastic panel", Compos. Struct., 255, 112947. https://doi.org/10.1016/j.compstruct.2020.112947 
  25. Al-Furjan, M., Safarpour, H., Habibi, M., Safarpour, M. and Tounsi, A. (2020v), "A comprehensive computational approach for nonlinear thermal instability of the electrically FG-GPLRC disk based on GDQ method", Eng. Comput., 38, 801-818. https://doi.org/10.1007/s00366-020-01088-7 
  26. Al-Furjan, M., Bolandi, S.Y., Habibi, M., Ebrahimi, F., Chen, G. and Safarpour, H. (2021a), "Enhancing vibration performance of a spinning smart nanocomposite reinforced microstructure conveying fluid flow", Eng. Comput., 38, 4097-4112. https://doi.org/10.1007/s00366-020-01255-w 
  27. Al-Furjan, M.S.H., Dehini, R., Paknahad, M., Habibi, M. and Safarpour, H. (2021b), "On the nonlinear dynamics of the multi-scale hybrid nanocomposite-reinforced annular plate under hygro-thermal environment", Arch. Civil Mech. Eng., 21(1), 4. https://doi.org/10.1007/s43452-020-00151-w 
  28. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struct. Mach., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343 
  29. Aranda-Ruiz, J., Loya, J. and Fernandez-Saez, J. (2012), "Bending vibrations of rotating nonuniform nanocantilevers using the Eringen nonlocal elasticity theory", Compos. Struct., 94(9), 2990-3001. https://doi.org/10.1016/j.compstruct.2012.03.033 
  30. Atanasov, M.S. and Stojanovic, V. (2020), "Nonlocal forced vibrations of rotating cantilever nano-beams", Eur. J. Mech. - A/Solids, 79, 103850. https://doi.org/10.1016/j.euromechsol.2019.103850 
  31. Azarbarmas, M., Mirjavadi, S.S., Ghasemi, A. and Hamouda, A.M. (2018), "A combined method to model dynamic recrystallization based on cellular automaton and a phenomenological (CAP) approach", Metals, 8(11), p. 923. https://doi.org/10.3390/met8110923 
  32. Azimi, M., Mirjavadi, S.S., Shafiei, N. and Hamouda, A.M.S. (2016), "Thermo-mechanical vibration of rotating axially functionally graded nonlocal Timoshenko beam", Appl. Phys. A, 123(1), 104. https://doi.org/10.1007/s00339-016-0712-5 
  33. Ba, Z., Wu, M. and Liang, J. (2020), "3D dynamic responses of a multi-layered transversely isotropic saturated half-space under concentrated forces and pore pressure", Appl. Mathe. Modell., 80, 859-878. https://doi.org/10.1016/j.apm.2019.11.014 
  34. Baghani, M., Mohammadi, M. and Farajpour, A. (2016), "Dynamic and stability analysis of the rotating nanobeam in a nonuniform magnetic field considering the surface energy", Int. J. Appl. Mech., 08(04), 1650048. https://doi.org/10.1142/s1758825116500484 
  35. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 38, 3699-3724. https://doi.org/10.1007/s00366-020-01191-9 
  36. Bai, Y., Suhatril, M., Cao, Y., Forooghi, A. and Assilzadeh, H. (2021), "Hygro-thermo-magnetically induced vibration of nanobeams with simultaneous axial and spinning motions based on nonlocal strain gradient theory", Eng. Comput., 38, 2509-2526. https://doi.org/10.1007/s00366-020-01218-1 
  37. Belhadj, A., Boukhalfa, A. and Belalia, S.A. (2017), "Free vibration analysis of a rotating nanoshaft based SWCNT", Eur. Phys. J. Plus, 132(12), 513. https://doi.org/10.1140/epjp/i2017-11783-2 
  38. Cao, J., Du, J., Fan, Q., Yang, J., Bao, C. and Liu, Y. (2024), "Reinforcement for earthquake-damaged glued-laminated timber knee-braced frames with self-tapping screws and CFRP fabric", Eng. Struct., 306, 117787. https://doi.org/10.1016/j.engstruct.2024.117787 
  39. Chen, D., Zheng, S., Wang, Y., Yang, L. and Li, Z. (2020), "Nonlinear free vibration analysis of a rotating two-dimensional functionally graded porous micro-beam using isogeometric analysis", Eur. J. Mech. - A/Solids, 84, 104083. https://doi.org/10.1016/j.euromechsol.2020.104083 
  40. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 284, 115195. https://doi.org/10.1016/j.compstruct.2022.115195 
  41. Cheng, F., Niu, B., Xu, N., Zhao, X. and Ahmad, A.M. (2023), "Fault detection and performance recovery design with deferred actuator replacement via a low-computation method", IEEE Transact. Automat. Sci. Eng., 26(3), 4646-4656. https://doi.org/10.1109/TASE.2023.3300723 
  42. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.W., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Based Des. Struct. Mach., 50(4), 1137-1160. https://doi.org/10.1080/15397734.2020.1744005 
  43. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., Int. J., 10(2), 175-189. https://doi.org/10.12989/anr.2021.10.2.175 
  44. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599 
  45. Dai, Y., Jiang, Z., Chen, K.Y., Zuo, D., Ali, H.E. and Albaijan, I. (2023a), "Geometry impact on the stability behavior of cylindrical microstructures: Computer modeling and application for small-scale sport structures", Steel Compos. Struct., Int. J., 48(4), 443-459. https://doi.org/10.12989/scs.2023.48.4.443 
  46. Dai, Z., Tang, H., Wu, S., Habibi, M., Moradi, Z. and Ali, H.E. (2023b), "Nonlinear consecutive dynamic instabilities of thermally shocked composite circular plates on the softening elastic foundation", Thin-Wall. Struct., 186, 110645. https://doi.org/10.1016/j.tws.2023.110645 
  47. Dai, Z., Wu, S., Habibi, M. and Ali, H.E. (2023c), "Application of point interpolation mesh-free method for magneto/electro rheological vibrations of sandwich conical panels", Aerosp. Sci. Technol., 135, 108180. https://doi.org/10.1016/j.ast.2023.108180 
  48. Ebrahimi, F. and Dabbagh, A. (2018), "Wave dispersion characteristics of rotating heterogeneous magneto-electro-elastic nanobeams based on nonlocal strain gradient elasticity theory", J. Electromag. Waves Applicat., 32(2), 138-169. https://doi.org/10.1080/09205071.2017.1369903 
  49. Ebrahimi, F., Shafiei, N., Kazemi, M. and Mousavi Abdollahi, S.M. (2017), "Thermo-mechanical vibration analysis of rotating nonlocal nanoplates applying generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(15), 1257-1273. https://doi.org/10.1080/15376494.2016.1227499 
  50. Ebrahimi, F., Hajilak, Z.E., Habibi, M. and Safarpour, H. (2019a), "Buckling and vibration characteristics of a carbon nanotube-reinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(13), 4590-4605. https://doi.org/10.1177/0954406219832323 
  51. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019b), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Waves Random Complex Media, 31(6), 1655-1681. https://doi.org/10.1080/17455030.2019.1694729 
  52. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019c), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4 
  53. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020a), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9 
  54. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020b), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Eur. Phys. J. Plus, 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x 
  55. Ehyaei, J., Akbarshahi, A. and Shafiei, N. (2017), "Influence of porosity and axial preload on vibration behavior of rotating FG nanobeam", Adv. Nano Res., Int. J., 5(2), 141-169. https://doi.org/10.12989/anr.2017.5.2.141 
  56. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Based Des. Struct. Mach., 47(5), 521-545. https://doi.org/10.1080/15397734.2019.1566743 
  57. Fan, F., Safaei, B. and Sahmani, S. (2021), "Buckling and postbuckling response of nonlocal strain gradient porous functionally graded micro/nano-plates via NURBS-based isogeometric analysis", Thin-Wall. Struct., 159, 107231. https://doi.org/10.1016/j.tws.2020.107231 
  58. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518 
  59. Fang, J., Zheng, S., Xiao, J. and Zhang, X. (2020), "Vibration and thermal buckling analysis of rotating nonlocal functionally graded nanobeams in thermal environment", Aerosp. Sci. Technol., 106, 106146. https://doi.org/10.1016/j.ast.2020.106146 
  60. Fazaeli, A., Habibi, M. and Ekrami, A.A. (2016), "Experimental and finite element comparison of mechanical properties and formability of dual phase steel and ferrite - pearlite steel with the same chemical composition", Metallurg. Eng., 19(2), 84-93. http://dx.doi.org/10.22076/me.2017.41458.1064 
  61. Forsat, M., Badnava, S., Mirjavadi, S.S., Barati, M.R. and Hamouda, A.M.S. (2020), "Small scale effects on transient vibrations of porous FG cylindrical nanoshells based on nonlocal strain gradient theory", Eur. Phys. J. Plus, 135(1), 81. https://doi.org/10.1140/epjp/s13360-019-00042-x 
  62. Gao, Q., Ding, Z. and Liao, W.-H. (2022), "Effective elastic properties of irregular auxetic structures", Compos. Struct., 287, 115269. https://doi.org/10.1016/j.compstruct.2022.115269 
  63. Ghadiri, M. and Shafiei, N. (2016), "Nonlinear bending vibration of a rotating nanobeam based on nonlocal Eringen's theory using differential quadrature method", Microsyst. Technol., 22(12), 2853-2867. https://doi.org/10.1007/s00542-015-2662-9 
  64. Ghadiri, M., Hosseini, S.H.S. and Shafiei, N. (2016a), "A power series for vibration of a rotating nanobeam with considering thermal effect", Mech. Adv. Mater. Struct., 23(12), 1414-1420. https://doi.org/10.1080/15376494.2015.1091527 
  65. Ghadiri, M., Shafiei, N. and Akbarshahi, A. (2016b), "Influence of thermal and surface effects on vibration behavior of nonlocal rotating Timoshenko nanobeam", Appl. Phys. A, 122(7), 673. https://doi.org/10.1007/s00339-016-0196-3 
  66. Ghadiri, M., Shafiei, N. and Alireza Mousavi, S. (2016c), "Vibration analysis of a rotating functionally graded tapered microbeam based on the modified couple stress theory by DQEM", Appl. Phys. A, 122(9), 837. https://doi.org/10.1007/s00339-016-0364-5 
  67. Ghadiri, M., Shafiei, N., Salekdeh, S.H., Mottaghi, P. and Mirzaie, T. (2016d), "Investigation of the dental implant geometry effect on stress distribution at dental implant-bone interface", J. Brazil. Soc. Mech. Sci. Eng., 38(2), 335-343. https://doi.org/10.1007/s40430-015-0472-8 
  68. Ghadiri, M., Shafiei, N. and Alavi, H. (2017a), "Thermomechanical vibration of orthotropic cantilever and propped cantilever nanoplate using generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(8), 636-646. https://doi.org/10.1080/15376494.2016.1196770 
  69. Ghadiri, M., Shafiei, N. and Babaei, R. (2017b), "Vibration of a rotary FG plate with consideration of thermal and Coriolis effects", Steel Compos. Struct., Int. J., 25(2), 197-207. https://doi.org/10.12989/scs.2017.25.2.197 
  70. Ghadiri, M., Shafiei, N. and Hossein Alavi, S. (2017c), "Vibration analysis of a rotating nanoplate using nonlocal elasticity theory", J. Solid Mech., 9(2), 319-337. https://jsm.arak.iau.ir/article_531824_c4e4e72f55b3a3a2cde7fda2f9b20ed3.pdf 
  71. Ghasemi, M., Zhang, C., Khorshidi, H., Zhu, L. and Hsiao, P.-C. (2023), "Seismic upgrading of existing RC frames with displacement-restraint cable bracing", Eng. Struct., 282, 115764. https://doi.org/10.1016/j.engstruct.2023.115764 
  72. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Based Des. Struct. Mach., 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310 
  73. Gu, X., He, J., Wang, Z., Li, M., Habibi, M. and Hashemabadi, D. (2023), "Application of hyperbolic differential quadrature method for vibration responses of the electrorheological disk", Eng. Anal. Bound. Elem., 155, 599-615. https://doi.org/10.1016/j.enganabound.2023.05.035 
  74. Guo, S., He, Y., Liu, D., Lei, J. and Li, Z. (2018), "Dynamic transverse vibration characteristics and vibro-buckling analyses of axially moving and rotating nanobeams based on nonlocal strain gradient theory", Microsyst. Technol., 24(2), 963-977. https://doi.org/10.1007/s00542-017-3441-6 
  75. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 38, 4127-4238. https://doi.org/10.1007/s00366-021-01433-4 
  76. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Process., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723 
  77. Guo, S., Zhao, X., Wang, H. and Xu, N. (2023), "Distributed consensus of heterogeneous switched nonlinear multiagent systems with input quantization and DoS attacks", Appl. Mathe. Comput., 456, 128127. https://doi.org/10.1016/j.amc.2023.128127 
  78. Guo, Y., Maalla, A. and Habibi, M. (2024), "Electroelastic wave dispersion in the rotary piezoelectric NEMS sensors/actuators via nonlocal strain gradient theory", Mech. Syst. Signal Process., 216, 111453. https://doi.org/10.1016/j.ymssp.2024.111453 
  79. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1 
  80. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech. Eng., 48(4), 141-144. https://doi.org/10.22060/MEJ.2016.664 
  81. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the MK model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636. 
  82. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Process., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009 
  83. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Eur. Phys. J. Plus, 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7 
  84. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019b), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct. Mach., 49(6), 811-840. https://doi.org/10.1080/15397734.2019.1701490 
  85. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019c), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x 
  86. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019d), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Based Des. Struct. Mach., 1-19. https://doi.org/10.1080/15397734.2019.1697932 
  87. Habibi, M., Taghdir, A. and Safarpour, H. (2019e), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B: Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125 
  88. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Based Des. Struct. Mach., 50(7), 2471-2492. https://doi.org/10.1080/15397734.2020.1779086 
  89. Habibi, M., Darabi, R., Sa, J.C.D. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686 
  90. Hao-nan, L., Cheng, L., Ji-ping, S. and Lin-quan, Y. (2021), "Vibration analysis of rotating functionally graded piezoelectric nanobeams based on the nonlocal elasticity theory", J. Vib. Eng. Technol., 9, 1155-1173. https://doi.org/10.1007/s42417-021-00288-9 
  91. Hashemi, H.R., Alizadeh, A.A., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Waves Random Complex Media., 31(6), 1340-1366. https://doi.org/10.1080/17455030.2019.1662968 
  92. He, L. and Deng, Q. (2023), "Construction of sports engineering structures with high resistance to improve the quality of sports training", Struct. Eng. Mech., Int. J., 86(2), 211-220. https://doi.org/10.12989/sem.2023.86.2.211 
  93. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin-Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019 
  94. Huang, H., Guo, M., Zhang, W., Zeng, J., Yang, K. and Bai, H. (2021a), "Numerical investigation on the bearing capacity of RC columns strengthened by HPFL-BSP under combined loadings", J. Build. Eng., 39, 102266. https://doi.org/10.1016/j.jobe.2021.102266 
  95. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021b), "Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem", Eng. Comput., 38(5), 4163-4179. https://doi.org/10.1007/s00366-021-01399-3 
  96. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021c), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 38, 2481-2498. https://doi.org/10.1007/s00366-021-01395-7 
  97. Huang, H., Li, M., Zhang, W. and Yuan, Y. (2022a), "Seismic behavior of a friction-type artificial plastic hinge for the precast beam-column connection", Arch. Civil Mech. Eng., 22(4), 201. https://doi.org/10.1007/s43452-022-00526-1 
  98. Huang, H., Xue, C., Zhang, W. and Guo, M. (2022b), "Torsion design of CFRP-CFST columns using a data-driven optimization approach", Eng. Struct., 251, 113479. https://doi.org/10.1016/j.engstruct.2021.113479 
  99. Huang, H., Li, M., Yuan, Y. and Bai, H. (2023a), "Experimental Research on the Seismic Performance of Precast Concrete Frame with Replaceable Artificial Controllable Plastic Hinges", J. Struct. Eng., 149(1), 04022222. https://doi.org/10.1061/JSENDH.STENG-11648. 
  100. Huang, S., Zong, G., Wang, H., Zhao, X. and Alharbi, K.H. (2023b), "Command filter-based adaptive fuzzy self-triggered control for MIMO nonlinear systems with time-varying full-state constraints", Int. J. Fuzzy Syst., 25(8), 3144-3161. https://doi.org/10.1007/s40815-023-01560-8 
  101. Huang, J., Pan, Z., Yang, S., Habibi, M. and Safa, M. (2024a), "Bending-based solution methodology using eigenvalue-eigenvector approach for analysis of foldable reinforced Golf Clubs cylindrical shell", Mech. Adv. Mater. Struct., 1-14. https://doi.org/10.1080/15376494.2024.2378372 
  102. Huang, S., Zong, G., Niu, B., Xu, N. and Zhao, X. (2024b), "Dynamic Self-Triggered Fuzzy Bipartite Time-Varying Formation Tracking for Nonlinear Multiagent Systems With Deferred Asymmetric Output Constraints", IEEE Transact. Fuzzy Syst., 32(5), 2700-2712. https://doi.org/10.1109/TFUZZ.2024.3357083 
  103. Ilkhani, M.R. and Hosseini-Hashemi, S.H. (2016), "Size dependent vibro-buckling of rotating beam based on modified couple stress theory", Compos. Struct., 143, 75-83. https://doi.org/10.1016/j.compstruct.2016.02.013 
  104. Jia, S., Niu, X., Jia, F. and Mahmoudi, T. (2023), "Advantages and disadvantages of renewable energy-oil-environmental pollution-from the point of view of nanoscience", Adv. Concrete Constr., Int. J., 16(1), 69-78. https://doi.org/10.12989/acc.2023.16.1.069 
  105. Klapper, Y., Sinha, N., Ng, T.W.S. and Lubrich, D. (2010), "A Rotational DNA Nanomotor Driven by an Externally Controlled Electric Field", Small, 6(1), 44-47. https://doi.org/10.1002/smll.200901106 
  106. Kong, F., Dong, F., Duan, M., Habibi, M., Safarpour, H. and Tounsi, A. (2022), "On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions", Thin-Wall. Struct., 179, 109631. https://doi.org/10.1016/j.tws.2022.109631 
  107. Li, Y. and Li, M. (2020), "Dynamic analysis of rotating double-tapered cantilever Timoshenko nano-beam using the nonlocal strain gradient theory", Mathe. Methods Appl. Sci., 43(15), 9206-9222. https://doi.org/10.1002/mma.6616 
  108. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure", Eng. Comput., 38, 1559-1580. https://doi.org/10.1007/s00366-020-01110-y 
  109. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020b), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 38, 703-724. https://doi.org/10.1007/s00366-020-01166-w 
  110. Li, J., Bin, N., Guo, F., Gao, X., Chen, R., Yao, H. and Zhou, C. (2023a), "Analysis on the influence of sports equipment of fiber reinforced composite material on social sports development", Adv. Nano Res., Int. J., 15(1), 49-57. https://doi.org/10.12989/anr.2023.15.1.049 
  111. Li, X., Li, M., Habibi, M., Najaafi, N. and Safarpour, H. (2023b), "Optimization of hybrid energy management system based on high-energy solid-state lithium batteries and reversible fuel cells", Energy, 283, 128454. https://doi.org/10.1016/j.energy.2023.128454 
  112. Li, J., Wang, Z., Zhang, S., Lin, Y., Jiang, L. and Tan, J. (2024), "Task incremental learning-driven Digital-Twin predictive modeling for customized metal forming product manufacturing process", Robot. Comput.-Integr. Manuf., 85, 102647. https://doi.org/10.1016/j.rcim.2023.102647 
  113. Liang, Z., Zhao, Y., Yu, H., Habibi, M. and Mahmoudi, T. (2024), "Artificial neural networks coupled with numerical approach for the stability prediction of non-uniform functionally graded microscale cylindrical structures", In: Structures, Vol. 60, p. 105826. https://doi.org/10.1016/j.istruc.2023.105826 
  114. Liu, F.L. and Liew, K.M. (1999), "Differential quadrature element method: a new approach for free vibration analysis of polar Mindlin plates having discontinuities", Comput. Methods Appl. Mech. Eng., 179(3), 407-423. https://doi.org/10.1016/S0045-7825(99)00049-3 
  115. Liu, M. and Xu, N. (2024), "Adaptive neural predefined-time hierarchical sliding mode control of switched under-actuated nonlinear systems subject to bouc-wen hysteresis", Int. J. Syst. Sci., 55(13), 2659-2676. https://doi.org/10.1080/00207721.2024.2344059 
  116. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct. Mach., 50(8), 2688-2713. https://doi.org/10.1080/15397734.2020.1784201 
  117. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings", Mech. Based Des. Struct. Mach., 50(1), 3722-3746. https://doi.org/10.1080/15397734.2020.1815544 
  118. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021a), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 38, 3977-3991. https://doi.org/10.1007/s00366-021-01316-8 
  119. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021b), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 38, 4181-4196. https://doi.org/10.1007/s00366-021-01419-2 
  120. Lori, E.S., Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. Comput., 37, 3489-3508. https://doi.org/10.1007/s00366-020-01004-z 
  121. Lu, P., Lee, H.P., Lu, C. and Zhang, P.Q. (2006), "Dynamic properties of flexural beams using a nonlocal elasticity model", J. Appl. Phys., 99(7), 073510. https://doi.org/10.1063/1.2189213 
  122. Lu, D., Ma, C., Du, X., Jin, L. and Gong, Q. (2017a), "Development of a new nonlinear unified strength theory for geomaterials based on the characteristic stress concept", Int. J. Geomech., 17(2), 04016058. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000729 
  123. Lu, D., Wang, G., Du, X. and Wang, Y. (2017b), "A nonlinear dynamic uniaxial strength criterion that considers the ultimate dynamic strength of concrete", Int. J. Impact Eng., 103, 124-137. https://doi.org/10.1016/j.ijimpeng.2017.01.011 
  124. Lu, L., Liao, K., Habibi, M., Safarpour, H. and Ali, H.E. (2023a), "Numerical methods to predict aero thermally induced vibrations of a curved pipe structure reinforced by GPLs", In: Structures, Vol. 55, pp. 1607-1621. https://doi.org/10.1016/j.istruc.2023.06.105 
  125. Lu, S., Li, S., Habibi, M. and Safarpour, H. (2023b), "Improving the thermo-electro-mechanical responses of MEMS resonant accelerometers via a novel multi-layer perceptron neural network", Measurement, 218, 113168. https://doi.org/10.1016/j.measurement.2023.113168 
  126. Lu, D., Meng, F., Zhou, X., Zhuo, Y., Gao, Z. and Du, X. (2023c), "A dynamic elastoplastic model of concrete based on a modeling method with environmental factors as constitutive variables", J. Eng. Mech., 149(12), 04023102. https://doi.org/10.1061/JENMDT.EMENG-7206 
  127. Luo, J., Wu, S., Hou, S., Moradi, Z., Habibi, M. and Khadimallah, M.A. (2022), "Thermally nonlinear thermoelasticity of a one-dimensional finite domain based on the finite strain concept", Eur. J. Mech. - A/Solids, 96, 104726. https://doi.org/10.1016/j.euromechsol.2022.104726 
  128. Ma, W.-L., Li, X.-F. and Lee, K.Y. (2020), "Third-order shear deformation beam model for flexural waves and free vibration of pipes", J. Acoust. Soc. Am., 147(3), 1634-1647. https://doi.org/10.1121/10.0000855 
  129. Ma, B., Chen, K.-y., Habibi, M. and Albaijan, I. (2023), "Static/dynamic analyses of sandwich micro-plate based on modified strain gradient theory", Mech. Adv. Mater. Struct., 1-8. https://doi.org/10.1080/15376494.2023.2219453 
  130. Malik, M. and Das, D. (2020), "Free vibration analysis of rotating nano-beams for flap-wise, chord-wise and axial modes based on Eringen's nonlocal theory", Int. J. Mech. Sci., 179, 105655. https://doi.org/10.1016/j.ijmecsci.2020.105655 
  131. Mirjavadi, S.S., Afshari, B.M., Barati, M.R. and Hamouda, A.M.S. (2020a), "Transient response of porous inhomogeneous nanobeams due to various impulsive loads based on nonlocal strain gradient elasticity", Int. J. Mech. Mater. Des., 16(1), 57-68. https://doi.org/10.1007/s10999-019-09452-2 
  132. Mirjavadi, S.S., Forsat, M., Barati, M.R. and Hamouda, A.M.S. (2020b), "Assessment of transient vibrations of graphene oxide reinforced plates under pulse loads using finite strip method", Comput. Concrete, Int. J., 25(6), 575-585. ttps://doi.org/10.12989/cac.2020.25.6.575 
  133. Mirjavadi, S.S., Forsat, M., Barati, M.R. and Hamouda, A.M.S. (2020c), "Investigating nonlinear vibrations of multi-scale truncated conical shell segments with carbon nanotube/fiberglass reinforcement using a higher order conical shell theory", J. Strain Anal. Eng. Des., 56(3), 181-192. https://doi.org/10.1177/0309324720939811 
  134. Mirjavadi, S.S., Forsat, M., Yahya, Y.Z., Barati, M.R., Jayasimha, A.N. and Khan, I. (2020d), "Finite element based post-buckling analysis of refined graphene oxide reinforced concrete beams with of imperfect multi-phase magneto-electro-elastic beams", J. Magnet. Magnet. Mater., 503, 166649. https://doi.org/10.1016/j.jmmm.2020.166649 
  135. Mirjavadi, S.S., Forsat, M., Barati, M.R. and Hamouda, A.M.S. (2022), "Nonlinear vibrations of variable thickness curved panels made of multi-scale epoxy/fiberglass/CNT material using Jacobi elliptic functions", Mech. Based Des. Struct. Mach., 50(7), 2333-2349. https://doi.org/10.1080/15397734.2020.1777156 
  136. Mirjavadi, S.S., Khan, I., Forsat, M., Barati, M.R. and Hamouda, A.M.S. (2023), "Analyzing nonlinear vibration of metal foam stiffened toroidal convex/concave shell segments considering porosity distribution", Mech. Based Des. Struct. Mach., 51(1), 310-326. https://doi.org/10.1080/15397734.2020.1841654 
  137. Moayedi, H., Habibi, M., Safarpour, H., Safarpour, M. and Foong, L. (2019), "Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk", Int. J. Appl. Mech., 11(10), 1950102. https://doi.org/10.1142/S1758825119501023 
  138. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020a), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(01), 2050010. https://doi.org/10.1142/S1758825120500106 
  139. Moayedi, H., Ebrahimi, F., Habibi, M., Safarpour, H. and Foong, L.K. (2020b), "Application of nonlocal strain-stress gradient theory and GDQEM for thermo-vibration responses of a laminated composite nanoshell", Eng. Comput., 37, 3359-3374. https://doi.org/10.1007/s00366-020-01002-1 
  140. Mohammadgholiha, M., Shokrgozar, A., Habibi, M. and Safarpour, H. (2019), "Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets", J. Vib. Control, 25(19-20), 2627-2640. https://doi.org/10.1177/1077546319863251 
  141. Mohammadi, M., Safarabadi, M., Rastgoo, A. and Farajpour, A. (2016), "Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment", Acta Mechanica, 227(8), 2207-2232. https://doi.org/10.1007/s00707-016-1623-4 
  142. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453. https://doi.org/10.22034/JSM.2019.665264 
  143. Mollaee, S., Budgett, D., Taberner, A. and Nielsen, P.M.F. (2023a), "High Density Surface Profiling of Multi-layer Soft Actuator Arrays for Use in Prosthetic Sockets", In: The 7th International Conference on Biomedical Engineering and Applications (ICBEA), April. https://doi.org/10.1109/ICBEA58866.2023.00016 
  144. Mollaee, S., Budgett, D.M., Taberner, A.J. and Nielsen, P.M.F. (2023b), "Hyperelastic constitutive model parameters identification using optical-based techniques and hybrid optimisation", Int. J. Mech. Mater. Des., 20(2), 233-249. https://doi.org/10.1007/s10999-023-09673-6 
  145. Mousavi, S.M., Shafiei, N. and Dadvand, A. (2017), "Numerical simulation of subsonic turbulent flow over NACA0012 airfoil: evaluation of turbulence models", Sigma J. Eng. Natural Sci., 35(1), 133-155. https://dergipark.org.tr/en/pub/sigma/issue/65585/1016455  1016455
  146. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.W. and Nabipour, N. (2020), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomol. Struct. Dyn., 39(7), 2543-2554. https://doi.org/10.1080/07391102.2020.1751297 
  147. Narendar, S. (2012), "Differential quadrature based nonlocal flapwise bending vibration analysis of rotating nanotube with consideration of transverse shear deformation and rotary inertia", Appl. Mathe. Computat., 219(3), 1232-1243. https://doi.org/10.1016/j.amc.2012.07.032 
  148. Omidi, S., Oskooee, M.B. and Shafiei, N. (2013), "Finite element analysis of an ultra-fine grained Titanium dental implant covered by different thicknesses of hydroxyapatite layer", Indian J. Dentist., 4(1), 1-4. https://doi.org/10.1016/j.ijd.2012.10.002 
  149. Oyarhossein, M.A., Alizadeh, A.A., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Scientific Reports, 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w 
  150. Peng, S., Habibi, M. and Pourjabari, A. (2023), "Generalized differential quadrature element solution, swarm, and GA optimization technique to obtain the optimum frequency of the laminated rotary nanostructure", Eng. Anal. Bound. Elem., 151, 101-114. https://doi.org/10.1016/j.enganabound.2023.02.052 
  151. Pham, Q.-H., Tran, T.T. and Nguyen, P.-C. (2023), "Nonlocal free vibration of functionally graded porous nanoplates using higher-order isogeometric analysis and ANN prediction", Alexandria Eng. J., 66, 651-667. https://doi.org/10.1016/j.aej.2022.12.023 
  152. Pourasghar, A., Homauni, M. and Kamarian, S. (2016), "Differential quadrature based nonlocal flapwise bending vibration analysis of rotating nanobeam using the eringen nonlocal elasticity theory under axial load", Polym. Compos., 37(11), 3175-3180. https://doi.org/10.1002/pc.23515 
  153. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Mathe. Applicat., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041 
  154. Pradhan, S.C. and Murmu, T. (2010), "Application of nonlocal elasticity and DQM in the flapwise bending vibration of a rotating nanocantilever", Physica E: Low-dimens. Syst. Nanostruct., 42(7), 1944-1949. https://doi.org/10.1016/j.physe.2010.03.004 
  155. Prusa, J. and Cifra, M. (2019), "Molecular dynamics simulation of the nanosecond pulsed electric field effect on kinesin nanomotor", Scientific Reports, 9(1), 19721. https://doi.org/10.1038/s41598-019-56052-3 
  156. Qi, L., Wang, Z., Sun, Y., Khorami, M., Mahmoudi, T. and Wu, H. (2024), "Modified couple stress and artificial intelligence examination of nonlinear buckling in porous variable thickness cylinder micro sport structures", Mech. Adv. Mater. Struct., 1-19. https://doi.org/10.1080/15376494.2024.2316795 
  157. Rahman, M.M., Chowdhury, M.M. and Alam, M.K. (2017), "Rotating-Electric-Field-Induced Carbon-Nanotube-Based Nanomotor in Water: A Molecular Dynamics Study", Small, 13(19), 1603978. https://doi.org/10.1002/smll.201603978 
  158. Rahmani, A., Faroughi, S. and Friswell, M.I. (2020), "The vibration of two-dimensional imperfect functionally graded (2D-FG) porous rotating nanobeams based on general nonlocal theory", Mech. Syst. Signal Process., 144, 106854. https://doi.org/10.1016/j.ymssp.2020.106854 
  159. Ramezani Azqandi, O., Mollaee, M., Mollaee, S., Behnam Taghadossi, M. and Sabet Birjandi, S. (2023), "Study the effect of hot fluid flow rate and carbon nanotube-water on the performance of nanofluid in gasketed plate heat exchanger", J. Thermal Anal. Calorimet., 148(21), 12185-12193. https://doi.org/10.1007/s10973-023-12486-6 
  160. Reddy, J.N. and El-Borgi, S. (2014), "Eringen's nonlocal theories of beams accounting for moderate rotations", Int. J. Eng. Sci., 82, 159-177. https://doi.org/10.1016/j.ijengsci.2014.05.006 
  161. Sabzevari, F., Amelirad, O., Moradi, Z. and Habibi, M. (2023), "Artificial intelligence evaluation of COVID-19 restrictions and speech therapy effects on the autistic children's behavior", Scientific Reports, 13(1), 4312. https://doi.org/10.1038/s41598-022-25902-y 
  162. Safarpour, H. and Ghadiri, M. (2017), "Critical rotational speed, critical velocity of fluid flow and free vibration analysis of a spinning SWCNT conveying viscous fluid", Microfluid. Nanofluid., 21(2), 22. https://doi.org/10.1007/s10404-017-1858-y 
  163. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus, 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2 
  164. Safarpour, H., Pourghader, J. and Habibi, M. (2019a), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465 
  165. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019b), "A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8 
  166. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 37(3), 2369-2388. https://doi.org/10.1007/s00366-020-00949-5 
  167. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016a), "Nonlinear vibration behavior of a rotating nanobeam under thermal stress using Eringen's nonlocal elasticity and DQM", Appl. Phys. A, 122(8), 728. https://doi.org/10.1007/s00339-016-0245-y 
  168. Shafiei, N., Mousavi, A. and Ghadiri, M. (2016b), "Vibration behavior of a rotating non-uniform FG microbeam based on the modified couple stress theory and GDQEM", Compos. Struct., 149, 157-169. https://doi.org/10.1016/j.compstruct.2016.04.024 
  169. Shafiei, N., Ghadiri, M., Makvandi, H. and Hosseini, S.A. (2017), "Vibration analysis of Nano-Rotor's Blade applying Eringen nonlocal elasticity and generalized differential quadrature method", Appl. Mathe. Modell., 43, 191-206. https://doi.org/10.1016/j.apm.2016.10.061 
  170. Shafiei, N., Hamisi, M. and Ghadiri, M. (2020), "Vibration Analysis of Rotary Tapered Axially Functionally Graded Timoshenko Nanobeam in Thermal Environment", J. Solid Mech., 12(1), 16-32. https://doi.org/10.22034/jsm.2019.563759.1273 
  171. Shahabinejad, E., Shafiei, N. and Ghadiri, M. (2018), "Influence of temperature change on modal analysis of rotary functionally graded nano-beam in thermal environment", J. Solid Mech., 10(4), 779-803. https://jsm.arak.iau.ir/article_545719.html 
  172. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3 
  173. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2020a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 37, 3629-3648. https://doi.org/10.1007/s00366-020-01024-9 
  174. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020b), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Mater., 13(7), 1707. https://doi.org/10.3390/ma13071707 
  175. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020c), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry, 12(4), 586. https://doi.org/10.3390/sym12040586 
  176. Shariati, M., Kamyab, H., Habibi, M., Ahmadi, S., Naghipour, M., Gorjinezhad, F., Mohammadirad, S. and Aminian, A. (2023), "Sulfuric acid resistance of concrete containing coal waste as a partial substitute for fine and coarse aggregates", Fuel, 348, 128311. https://doi.org/10.1016/j.fuel.2023.128311 
  177. Shivanian, E., Ghadiri, M. and Shafiei, N. (2017), "Influence of size effect on flapwise vibration behavior of rotary microbeam and its analysis through spectral meshless radial point interpolation", Appl. Phys. A, 123(5), 329. https://doi.org/10.1007/s00339-017-0955-9 
  178. Shokrgozar, A., Safarpour, H. and Habibi, M. (2020), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234(2), 512-529. https://doi.org/10.1177/0954406219883312 
  179. Singh, D.K. and Pal, P. (2021), "Forced vibration analysis of stiffened lock gate structure", J. Sound Vib., 510, 116278. https://doi.org/10.1016/j.jsv.2021.116278 
  180. Song, S., Zhang, T. and Zhui, Z. (2023), "Dynamic analysis of nanotube-based nanodevices for drug delivery in sports-induced varied conditions applying the modified theories", Steel Compos. Struct., Int. J., 49(5), 487-502. https://doi.org/10.12989/scs.2023.49.5.487 
  181. Song, G., Zou, Y., Nie, Y., Habibi, M., Albaijan, I. and Toghroli, E. (2024a), "Application of Hashin-Shtrikman bounds homogenization model for frequency analysis of imperfect FG bio-composite plates", J. Mech. Behav. Biomed. Mater., 151, 106321. https://doi.org/10.1016/j.jmbbm.2023.106321 
  182. Song, X., Wang, W., Deng, Y., Su, Y., Jia, F., Zaheer, Q. and Long, X. (2024b), "Data-driven modeling for residual velocity of projectile penetrating reinforced concrete slabs", Eng. Struct., 306, 117761. https://doi.org/10.1016/j.engstruct.2024.117761 
  183. Su, Z., Meng, J. and Su, Y. (2023), "Application of SiO2 nanocomposite ferroelectric material in preparation of trampoline net for physical exercise", Adv. Nano Res., Int. J., 14(4), 355-362. https://doi.org/10.12989/anr.2023.14.4.355 
  184. Talebitooti, R., Rezazadeh, S.O. and Amiri, A. (2019), "Comprehensive semi-analytical vibration analysis of rotating tapered AFG nanobeams based on nonlocal elasticity theory considering various boundary conditions via differential transformation method", Compos. Part B: Eng., 160, 412-435. https://doi.org/10.1016/j.compositesb.2018.12.085 
  185. Tang, F., Wang, H., Zhang, L., Xu, N. and Ahmad, A.M. (2023a), "Adaptive optimized consensus control for a class of nonlinear multi-agent systems with asymmetric input saturation constraints and hybrid faults", Commun. Nonlinear Sci. Numer. Simul., 126, 107446. https://doi.org/10.1016/j.cnsns.2023.107446 
  186. Tang, J., Wu, S., Habibi, M., Safarpour, M. and Ali, H.E. (2023b), "Flutter analysis of multi-directional functionally graded sector poroelastic disks", Aerosp. Sci. Technol., 140, 108481. https://doi.org/10.1016/j.ast.2023.108481 
  187. Thai, H.-T. (2012), "A nonlocal beam theory for bending, buckling, and vibration of nanobeams", Int. J. Eng. Sci., 52, 56-64. https://doi.org/10.1016/j.ijengsci.2011.11.011 
  188. Tian, R., Wang, M., Zhang, Y., Jing, X. and Zhang, X. (2024), "A concave X-shaped structure supported by variable pitch springs for low-frequency vibration isolation", Mech. Syst. Signal Process., 218, 111587. https://doi.org/10.1016/j.ymssp.2024.111587 
  189. Wang, X. and Gu, H. (1997), "Static analysis of frame structures by the differential quadrature element method", Int. J. Numer. Methods Eng., 40(4), 759-772. https://doi.org/10.1002/(SICI)1097-0207(19970228)40:4<759::AID-NME87>3.0.CO;2-9 
  190. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 29(10), 1475-1488. https://doi.org/10.1080/15376494.2020.1824284 
  191. Wang, H., Habibi, M., Marzouki, R., Majdi, A., Shariati, M., Denic, N., Zakic, A., Khorami, M., Khadimallah, M.A. and Ebid, A.A.K. (2022a), "Improving the Self-Healing of Cementitious Materials with a Hydrogel System", Gels, 8(5), 278. https://doi.org/10.3390/gels8050278 
  192. Wang, P., Gao, Z., Pan, F., Moradi, Z., Mahmoudi, T. and Khadimallah, M.A. (2022b), "A couple of GDQM and iteration techniques for the linear and nonlinear buckling of bidirectional functionally graded nanotubes based on the nonlocal strain gradient theory and high-order beam theory", Eng. Anal. Bound. Elem., 143, 124-136. https://doi.org/10.1016/j.enganabound.2022.06.007 
  193. Wang, Y., Jia, Q., Deng, T., Habibi, M., Al-Kikani, S. and Ali, H.E. (2023), "Wave propagation analysis of the ball in the handball's game", Struct. Eng. Mech., Int. J., 85(6), 729-742. https://doi.org/10.12989/sem.2023.85.6.729 
  194. Wang, C., Habibi, M. and Mahmoudi, T. (2024), "Stability analysis of the nonuniform functionally graded cylindrical small-scale beam structures: Application in sport structures", Steel Compos. Struct., Int. J., 52(1), 15-29. https://doi.org/10.12989/scs.2024.52.1.015 
  195. Wei, J., Ying, H., Yang, Y., Zhang, W., Yuan, H. and Zhou, J. (2023), "Seismic performance of concrete-filled steel tubular composite columns with ultra high performance concrete plates", Eng. Struct., 278, 115500. https://doi.org/10.1016/j.engstruct.2022.115500 
  196. Wei, F., Zhang, L., Niu, B. and Zong, G. (2024), "Adaptive decentralized fixed-time neural control for constrained strong interconnected nonlinear systems with input quantization", Int. J. Robust Nonlinear Control, 34(14), 9899-9927. https://doi.org/10.1002/rnc.7497 
  197. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 38, 4127-4143. https://doi.org/10.1007/s00366-021-01396-6 
  198. Wu, W., Xu, N., Niu, B., Zhao, X. and Ahmad, A.M. (2023), "Low-computation adaptive saturated self-triggered tracking control of uncertain networked systems", Electronics, 12(13), p. 2771. https://doi.org/10.3390/electronics12132771 
  199. Wu, X., Zhao, N., Ding, S., Wang, H. and Zhao, X. (2024), "Distributed Event-Triggered Output-Feedback Time-Varying Formation Fault-Tolerant Control for Nonlinear Multi-Agent Systems", IEEE Transact. Automat. Sci. Eng., 1-12. https://doi.org/10.1109/TASE.2024.3400325 
  200. Xia, W., Du, J., Habibi, M., Shariati, M. and Khadimallah, M.A. (2022), "Application of Chebyshev-based GDQ and Newmark methods to viscothermoelasticity responses of FG composite annular systems", Eng. Anal. Bound. Elem., 143, 28-42. https://doi.org/10.1016/j.enganabound.2022.06.003 
  201. Xiang, J., Lai, Y., Moradi, Z. and Khorami, M. (2023), "Wave propagation phenomenon of functionally graded graphene oxide powder-strengthened nanocomposite curved beam", Solid State Commun., 369, 115193. https://doi.org/10.1016/j.ssc.2023.115193 
  202. Xiang, Y., Wang, Z., Zhang, S., Jiang, L., Lin, Y. and Tan, J. (2024), "Cross-sectional performance prediction of metal tubes bending with tangential variable boosting based on parameters-weight-adaptive CNN", Expert Syst. Applicat., 237, 121465. https://doi.org/10.1016/j.eswa.2023.121465 
  203. Xiao, H., Habibi, M. and Habibi, M. (2024), "Bulk wave propagation analysis of imperfect FG bio-composite beams resting on variable elastic medium", Mater. Today Commun., 39, 108524. https://doi.org/10.1016/j.mtcomm.2024.108524 
  204. Xiong, Q.-M., Chen, Z., Huang, J.-T., Zhang, M., Song, H., Hou, X.-F., Li, X.-B. and Feng, Z.-J. (2020), "Preparation, structure and mechanical properties of Sialon ceramics by transition metal-catalyzed nitriding reaction", Rare Metals, 39(5), 589-596. https://doi.org/10.1007/s12598-020-01385-6 
  205. Xu, X.-J., Deng, Z.-C., Zhang, K. and Xu, W. (2016), "Observations of the softening phenomena in the nonlocal cantilever beams", Compos. Struct., 145, 43-57. https://doi.org/10.1016/j.compstruct.2016.02.073 
  206. Yahya, G.A., Abd-Alla, A.M. and El-Bendary, S. (2021), "Radial vibrations on an elastic medium subjected to rotation and magnetic field", Mech. Based Des. Struct. Mach., 51(5), 2401-2414. https://doi.org/10.1080/15397734.2021.1875845 
  207. Yan, C., Zhang, T., Zheng, T. and Mahmoudi, T. (2024), "Stability characteristic of bi-directional FG nano cylindrical imperfect composite: Improving the performance of sports bikes using carbon nanotubes", Steel Compos. Struct., Int. J., 50(4), 459-474. https://doi.org/10.12989/scs.2024.50.4.459 
  208. Yang, Y. and Mao, Y. (2023), "Effect of cross-section geometry on the stability performance of functionally graded cylindrical imperfect composite structures used in stadium construction", Geomech. Eng., Int. J., 35(2), 181-194. https://doi.org/10.12989/gae.2023.35.2.181 
  209. Yang, J. and Shen, H.-S. (2002), "Vibration characteristics and transient response of shear-deformable functionally graded plates in thermal environments", J. Sound Vib., 255(3), 579-602. https://doi.org/10.1006/jsvi.2001.4161 
  210. Yang, R., Jia, A., Hu, Q., Guo, X. and Sun, M. (2020), "Particle size effect on water vapor sorption measurement of organic shale: One example from Dongyuemiao Member of Lower Jurassic Ziliujing Formation in Jiannan Area of China", Adv. Geo-Energy Res., 4(2), 207-218. https://doi.org/10.26804/ager.2020.02.09 
  211. Yang, C., Su, C., Hu, H., Habibi, M., Safarpour, H. and Khadimallah, M.A. (2023), "Performance optimization of photovoltaic and solar cells via a hybrid and efficient chimp algorithm", Solar Energy, 253, 343-359. https://doi.org/10.1016/j.solener.2023.02.036 
  212. Yao, Y., Zhou, L., Huang, H., Chen, Z. and Ye, Y. (2023), "Cyclic performance of novel composite beam-to-column connections with reduced beam section fuse elements", Structures, 50, 842-858. https://doi.org/10.1016/j.istruc.2023.02.054 
  213. Ye, M., HangKong, O., Lin, Y., Ynag, Q., Xu, Q., Chen, T., Sun, L. and Ma, L. (2023), "Electron transport properties of Y-type zigzag branched carbon nanotubes", Adv. Nano Res., Int. J., 15(3), 263-275. https://doi.org/10.12989/.2023.15.3.263 
  214. Yin, J., Zou, Y., Li, J., Zhang, W., Li, X. and Habibi, M. (2024), "Dynamic stability and frequency responses of the tilted curved nanopipes in a supersonic airflow via 2D hybrid nonlocal strain gradient theory", Eng. Struct., 301, 117240. https://doi.org/10.1016/j.engstruct.2023.117240 
  215. Yu, C., Lin, P., Wu, Z., Habibi, M. and Zhang, W. (2024), "Multi-load effect on the deformation analysis of composite nano reinforced origami sandwich panel", Mech. Adv. Mater. Struct., 1-19. https://doi.org/10.1080/15376494.2024.2367015 
  216. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., Int. J., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469 
  217. Zhang, P. and Fu, Y. (2013), "A higher-order beam model for tubes", Eur. J. Mech. - A/Solids, 38, 12-19. https://doi.org/10.1016/j.euromechsol.2012.09.009 
  218. Zhang, Z. and Ma, X. (2024), "Friction-induced nonlinear dynamics in a spline-rotor system: Numerical and experimental studies", Int J. Mech. Sci., 278, 109427. https://doi.org/10.1016/j.ijmecsci.2024.109427 
  219. Zhang, C., Zhu, D., Luo, Q., Liu, L., Liu, D., Yan, L. and Zhang, Y. (2017), "Major factors controlling fracture development in the Middle Permian Lucaogou Formation tight oil reservoir, Junggar Basin, NW China", J. Asian Earth Sci., 146, 279-295. https://doi.org/10.1016/j.jseaes.2017.04.032 
  220. Zhang, C., Zhang, X., Santosh, M., Liu, D.-D., Ma, C., Zeng, J.-H., Jiang, S., Luo, Q., Kong, X.-Y. and Liu, L.-F. (2020a), "Zircon Hf-O-Li isotopes of granitoids from the Central Asian Orogenic Belt: Implications for supercontinent evolution", Gondwana Res., 83, 132-140. https://doi.org/10.1016/j.gr.2020.02.003 
  221. Zhang, P., Wu, G., Zhao, C., Zhou, L., Wang, X. and Wei, S. (2020b), "Magnetic stomatocyte-like nanomotor as photosensitizer carrier for photodynamic therapy based cancer treatment", Coll. Surf. B: Biointerfaces, 194, 111204. https://doi.org/10.1016/j.colsurfb.2020.111204 
  222. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Waves Random Complex Media., 34(3), 1835-1858. https://doi.org/10.1080/17455030.2021.1948627 
  223. Zhang, C., Liu, D., Liu, Q., Jiang, S., Wang, X., Wang, Y., Ma, C., Wu, A., Zhang, K. and Ma, Y. (2023a), "Magmatism and hydrocarbon accumulation in sedimentary basins: A review", Earth-Sci. Rev., 244, 104531. https://doi.org/10.1016/j.earscirev.2023.104531 
  224. Zhang, Q., Zou, X., Wang, Y. and Habibi, M. (2023a), "Study on photocatalytic, electric, and sensing behavior of Co-and Ag-codoped tin dioxide (SnO2) nano particles", Mater. Sci. Eng.: B, 296, 116687. https://doi.org/10.1016/j.mseb.2023.116687 
  225. Zhang, P., Song, J. and Mahmoudi, T. (2023b), "Simulation and modeling for stability analysis of functionally graded non-uniform pipes with porosity-dependent properties", Steel Compos. Struct., Int. J., 48(2), 235-250. https://doi.org/10.12989/scs.2023.48.2.235 
  226. Zhang, S., Lai, Y., Chen, K., Habibi, M., Khorami, M. and Haider Mussa, Z. (2023c), "Influence of MWCNT's waviness and aggregation factors on wave dispersion response of MWCNT-strengthened nanocomposite curved beam", Structures, 53, 1239-1249. https://doi.org/10.1016/j.istruc.2023.04.024 
  227. Zhang, X., Li, J., Cui, Y., Habibi, M., Ali, H.E., Albaijan, I. and Mahmoudi, T. (2023d), "Static analysis of 2D-FG nonlocal porous tube using gradient strain theory and based on the first and higher-order beam theory", Steel Compos. Struct., Int. J., 49(3), 293-306. https://doi.org/10.12989/scs.2023.49.3.293 
  228. Zhang, Z., Du, J. and Mahmoudi, T. (2023e), "Green synthesis of silver nanoparticles to the microbiological corrosion deterrence of oil and gas pipelines buried in the soil", Adv. Nano Res., Int. J., 15(4), 355-366. https://doi.org/10.12989/anr.2023.15.4.355 
  229. Zhang, D., Huang, X., Wang, T., Habibi, M., Albaijan, I. and Toghroli, E. (2024a), "Dynamic stability improvement in spinning FG-piezo cylindrical structure using PSO-ANN and firefly optimization algorithm", Mater. Sci. Eng.: B, 302, 117210. https://doi.org/10.1016/j.mseb.2024.117210 
  230. Zhang, S., Liu, L., Zhang, X., Zhou, Y. and Yang, Q. (2024b), "Active vibration control for ship pipeline system based on PI-LQR state feedback", Ocean Eng., 310, 118559. https://doi.org/10.1016/j.oceaneng.2024.118559 
  231. Zhang, W., Zheng, D., Huang, Y. and Kang, S. (2024c), "Experimental and simulative analysis of flexural performance in UHPC-RC hybrid beams", Constr. Build. Mater., 436, 136889. https://doi.org/10.1016/j.conbuildmat.2024.136889 
  232. Zhang, X., Wang, S., Liu, H., Cui, J., Liu, C. and Meng, X. (2024d), "Assessing the impact of inertial load on the buckling behavior of piles with large slenderness ratios in liquefiable deposits", Soil Dyn. Earthq. Eng., 176, 108322. https://doi.org/10.1016/j.soildyn.2023.108322 
  233. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2024e), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Waves Random Complex Media., 34(3), 1835-1858. https://doi.org/10.1080/17455030.2021.1948627 
  234. Zhao, H., Li, C., Fu, Y., Oyarhossein, M.A., Habibi, M. and Safarpour, H. (2023a), "Quasi-static indentation, low-velocity impact, and resonance responses of the laminated double-curved panel considering various boundary conditions", Thin-Wall. Struct., 183, 110360. 
  235. Zhao, Y., Niu, B., Zong, G., Zhao, X. and Alharbi, K.H. (2023b), "Neural network-based adaptive optimal containment control for non-affine nonlinear multi-agent systems within an identifier-actor-critic framework", J. Franklin Inst., 360(12), 8118-8143. https://doi.org/10.1016/j.jfranklin.2023.06.014 
  236. Zheng, W., Liu, J., Oyarhossein, M.A., Safarpour, H. and Habibi, M. (2023), "Prediction of nth-order derivatives for vibration responses of a sandwich shell composed of a magnetorheological core and composite face layers", Eng. Anal. Bound. Elem., 146, 170-183. https://doi.org/10.1016/j.enganabound.2022.10.019 
  237. Zhiqiang, S., Aiyun, L., Daichang, Z., Shuangjun, L., Habibi, M., Xiaoling, F. and Albaijan, I. (2024), "Application of a folded nanostructure reinforcement for the pole vault curved shell", Mech. Adv. Mater. Struct., 1-15. https://doi.org/10.1080/15376494.2024.2375368 
  238. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., Int. J., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295 
  239. Zhou, Y., Zhang, Y. and Yao, G. (2021), "Higher-order stability analysis of a rotating BDFG tapered beam with time-varying velocity", Compos. Struct., 267, 113858. https://doi.org/10.1016/j.compstruct.2021.113858 
  240. Zhu, L., Ren, H., Habibi, M., Mohammed, K.J. and Khadimallah, M.A. (2022), "Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm", J. Cleaner Product., 132697. https://doi.org/10.1016/j.jclepro.2022.132697 
  241. Zisong, Z. and Habibi, M. (2024), "AI-assisted prediction of St14 steel sheets formability: Neural-fuzzy systems and crystal plasticity assessments", In: Structures, Vol. 65, p. 106633. https://doi.org/10.1016/j.istruc.2024.106633