Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지
DOI QR코드

DOI QR Code

Bond Strength and Development Length Model for Corroded Reinforcing Bars

부식된 철근의 부착강도 및 정착길이 산정모델

  • Han, Sun-Jin (Department of Architectural Engineering, Jeonju University) ;
  • Lee, Deuckhang (Department of Architectural Engineering, Chungbuk National University)
  • 한선진 (전주대학교 건축공학과) ;
  • 이득행 (충북대학교 건축공학과)
  • Received : 2024.05.28
  • Accepted : 2024.06.27
  • Published : 2024.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study aims to propose a simplified equation for estimating the bond strength of corroded reinforcing bars. To this end, extensive parametric analyses were performed using the detailed analysis method presented in the authors' previous study, where a wide range of critical variables were considered, such as compressive strength of concrete, net cover thickness, and reinforcing bar diameter. The sensitivity in bond strength of the corroded reinforcing bar according to each variable was evaluated. On this basis, a simplified formula for the bond strength of the corroded reinforcing bar was derived through regression analysis. The proposed equation was rigorously tested and verified using the bond test results of corroded reinforcing bars collected from the literature. The results confirmed that the proposed equation could estimate the bond strengths of specimens with better accuracy than the existing models, providing a reliable tool for engineers and researchers. In addition, the proposed equation was used to analyze the development length required for corroded tensile reinforcement to exert its yield strength, and it showed that the cover thickness of concrete must be at least four times the diameter of the reinforcing bar to achieve the yielding strength of reinforcing bar even at a corrosion degree of more than 5.0%.

Keywords

Acknowledgement

제1저자 한선진은 이 논문은 2023년도 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임에 감사드립니다 (RS-2023-00209480). 또한, 교신저자 이득행은 이 성과는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임에 감사드립니다(No. RS-2023-00209647).

References

  1. Han SJ, Lee DH, Kim KS, Seo SY, Moon J, Paulo PJM. Degradation of flexural strength in reinforced concrete members caused by steel corrosion. Constr Build Mater. 2014;54(1):572-583.
  2. Tran DVP, Sancharoen P, Klomjit P, Tangtermsirikul S, Nguyen THY. Prediction equations for corrosion rate of reinforcing steel in cement-fly ash concrete. J Struct Integr Maint. 2023;8(2):1-11.
  3. Lakshmi A, Pandit P, Nayak G, Bhagwat Y, Kumar S. Influence of corrosion-based section loss on morphology and tensile capacity of pre-stressing strands. J Struct Integr Maint. 2024;9(1):91-99.
  4. Oh BH, Kim KH, Jang BS. Critical corrosion amount to cause cracking of reinforced concrete structures. ACI Mater J. 2009; 106(4):333-339.
  5. Al-Sulaimani GJ, Kaleemullah M, Basunbul IA, Rasheeduzzafar. Influence of corrosion and cracking on bond behavior and strength of reinforced concrete members. ACI Struct J. 1990;87(23):220-231.
  6. Almusallam AA, Al-Gahtani AS, Aziz AR, Rasheeduzzafar. Effect of reinforcement corrosion on bond strength. construction and building materials. Constr Build Mater. 1996 Mar;10(2):123-129.
  7. Cabrera JG. Deterioration of concrete due to reinforcement steel corrosion. Cem Concr Compos. 1996;18(1):47-59.
  8. Lee HS, Noguchib T, Tomosawac F. Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion. Cem Concr Res. 2002;32(1): 1313-1318.
  9. Fang C, Karin L, Chen L, Zhu C. Corrosion influence on bond in reinforced concrete. Cem Concr Res. 2004 Nov;34(11):2159-2167.
  10. Chung L, Kim JHJ, Yi ST. Bond strength prediction for reinforced concrete members with highly corroded reinforcing bars. Cem Concr Compos. 2008 Aug;30(7):603-611.
  11. Maaddawy TE, Soudki K, Topper T. Analytical model to predict nonlinear flexural behavior of corroded reinforced concrete beams. ACI Struct J. 2005;102(4):550-559.
  12. Bhargava K, Ghosh AK, Mori Y, Ramanujam S. Ramanujam S. Models for corrosion-induced bond strength degradation in reinforced concrete. ACI Mater J. 2007;104(6):594-603
  13. Stanish K, Hooton RD, Pantazopoulou SJ. Corrosion Effects on Bond Strength in Reinforced Concrete, ACI Struct J. 1999; 96(6):915-921.
  14. Auyeung Y, Balaguru P, Chung L. Bond behavior of corroded reinforcement bars. ACI Mater J. 2000;97(2):214-220.
  15. Xu YL. Experimental study of anchorage properties for deformed bars in concrete [PhD thesis]. [Beijing]: Tsinhua University: c1990. 122 p.
  16. Chen WF. Plasticity in reinforced concrete. New York: McGraw-Hill; c1982. 363 p.
  17. Wang XH, Liu XL. Modeling bond strength of corroded reinforcement without stirrups. Cem Concr Res. 2004 Aug;34(8): 1331-1339.
  18. Pantazopoulou SJ, Papoulia KD. Modeling cover-cracking due to reinforcement corrosion in RC structures. Journal of Engineering Mechanics Division. 2001;127(4):342-351.
  19. Coronelli D. Corrosion cracking and bond strength modeling for corroded bars in reinforced concrete, ACI Struct J. 2002;99(3): 267-276.
  20. Ka SB, Han SJ, Lee DH, Choi SH, Oh YH, Kim KS. Bond strength of reinforcing bars considering failure mechanism. Eng Fail Anal. 2018 Dec;94:327-338.
  21. Tefers R. A Theory of bond applied to overlapping tensile reinforcement splices for deformed bars. Publication 73:2, Division of concrete Structures, Chalmers University of Technology, Goteborg, Sweden; c1973.
  22. Korean Design Standard, KDS 14 20 52 - Design Standard for Development and Splices in Concrete Structures, Republic of Korea; c2022.
  23. European Committee for Standardization. Eurocode 2: Design of Concrete Structures Part 1-1: General Rules and Rules for Building (EM 1994-1-1: 2004), Belgium; c2004.