DOI QR코드

DOI QR Code

3경간 연속 거더교의 지진응답에 대한 포트받침 노후화의 영향

Effect of Pot Bearing Aging on the Seismic Response of a Three-span Continuous Girder Bridge

  • 조주현 (홍익대학교 건설환경공학과) ;
  • 김동호 (홍익대학교 건설환경공학과) ;
  • 강준원 (홍익대학교 건설환경공학과) ;
  • 윤혜진 (한국건설기술연구원 구조연구본부)
  • Ju Hyeon Jo (Department of Civil and Environmental Engineering, Hongik University) ;
  • Dong Ho Kim (Department of Civil and Environmental Engineering, Hongik University) ;
  • Jun Won Kang (Department of Civil and Environmental Engineering, Hongik University) ;
  • Hyejin Yoon (Structural Research Headquarters of Korea Institute of Construction Technology)
  • 투고 : 2024.06.10
  • 심사 : 2024.06.19
  • 발행 : 2024.08.31

초록

이 논문은 포트 받침이 설치된 3경간 연속 콘크리트 거더교를 대상으로 받침의 노후화가 교량의 지진응답에 미치는 영향을 분석하였다. 포트 받침은 고정단 및 가동단의 강성을 반영해 교축방향, 교축직각방향, 수직방향의 탄성 스프링으로 모델링하였다. 포트 받침의 노후화를 고정단 받침의 수평강성 저하와 가동단 받침의 수평강성 증가로 나누어 받침의 노후화가 교량의 지진 거동에 미치는 영향을 분석하였다. 수치해석으로부터 구한 고유진동수 값과 이 교량의 설계 고유진동수를 비교하여 해석 대상 3경간 연속 거더교의 유한요소모델이 타당함을 보였으며, 국내 도로교설계기준(한계상태설계법)의 설계응답스펙트럼에 부합하는 인공지진파를 이용해 받침 강성의 변화에 따른 교량 상부 및 받침의 지진응답을 계산하였다. 지진해석 결과, 받침의 노후화로 인해 고정단 받침의 수평강성이 감소할 경우 지진으로 인한 고정단 받침의 절대최대 상대변위가 증가하였다. 이는 받침을 지지하는 모르타르의 균열과 앵커 볼트의 탈락 가능성이 커짐을 의미한다. 받침의 노후화로 인해 가동단 받침의 수평강성이 증가하는 경우에는 지진으로 인한 고정단 받침의 절대최대 전단력이 감소하였다. 그러나 이 경우 가동단 바로 위 거더 단면에 추가의 휨인장응력이 발생할 수 있으며, 이러한 받침 성능의 변화로 인하여 지진 시 연속 콘크리트교에 예기치 못한 구조적 손상이 발생할 수 있다.

This study investigated the effect of bearing aging on the seismic response of a three-span continuous concrete girder bridge with pot bearings installed. The pot bearings were modeled as elastic springs in the longitudinal, transverse, and vertical directions of the bridge to reflect the stiffness of fixed and movable supports. The effect of bearing aging on the seismic response of the bridge was examined by considering two factors: a decrease in the horizontal stiffness of the fixed bearings and an increase in the horizontal stiffness of the movable bearings. The finite element model of the three-span continuous girder bridge was validated by comparing its numerical natural frequencies with the designed natural frequencies. Using artificial ground motions that conform to the design response spectrum specified by the KDS bridge seismic design code, the seismic responses of the bridge's girders and bearings were calculated, considering the bearing stiffness variation due to aging. The results of a numerical analysis revealed that a decrease in the horizontal stiffness of the fixed bearings led to an increase in the absolute maximum relative displacement of the bearings during an earthquake. This increases the risk of the mortar block that supports the bearing cracking and the anchor bolt breaking. However, an increase in the horizontal stiffness of the movable bearings due to aging decreased the absolute maximum shear on the fixed bearings. Despite the shear reduction in the fixed bearings, the aging of the pot bearings change could cause additional tensile bending stress in the girder section above the free bearings, which could lead to unexpected structural damage to the continuous bridge during an earthquake.

키워드

과제정보

본 연구는 2022년도 국토교통부 국토교통과학기술진흥원의 국토교통기술촉진연구(21CTAP-C163620-01)에 의해 수행되었습니다. 연구비 지원에 깊은 감사를 드립니다.

참고문헌

  1. Ahn, H., Park, K.-T., Jung, K.S., Kim, Y.-H., Lee, J.-H. (2021) A Comparative Study on Seismic Fragility of RC Slab Bridge Considering Aging Effect of Components, J. Korea Inst. Struct. Maint. & Insp., 25(4), pp.177~184.
  2. An, H., Lee, J.H. (2020) A Study on Seismic Fragility of PSC Bridge Considering Aging and Retrofit Effects, J. Korea Inst. Struct. Maint. & Insp., 24(6), pp.34~41.
  3. Ghosh, J., Padgett, J.E. (2011) Probabilistic Seismic Loss Assessment of Aging Bridges using a Component-Level Cost Estimation Approach, Earthq. Eng. & Struct. Dyn., 40(15), pp. 1743~1761.
  4. Kong, S., Moon, J., Song, J.-K. (2022) System-Level Seismic Fragility Evaluation of Bridge Considering Aging Effects, J. Comput. Struct. Eng. Inst. Korea, 35(3), pp.149~158.
  5. Kurino, S., Wei, W., Igarashi, A. (2021) Seismic Fragility and Uncertainty Mitigation of Cable Restrainer Retrofit for Isolated Highway Bridges Incorporated with Deteriorated Elastomeric Bearings, Eng. Struct., 237, p.112190.
  6. Matsuzaki, H. (2022) Time-Dependent Seismic Reliability of Isolated Bridges Considering Ageing Deterioration of Lead Rubber Bearings, Struct. & Infrastruct. Eng., 18(10-11), pp.1526~1541.
  7. MOIS (Ministry of the Interior and Safety) (2023) The 6th Track Record of Seismic Retrofit Projects on Appropriateness Evaluation, MOIS, Korea.
  8. MOLIT (Ministry of Land, Infrastructure and Transport) (2016) Korean Highway Bridge Design Code (Limit State Design), MOLIT, Korea.
  9. Nielson, B.G., DesRoches, R. (2007) Seismic Fragility Methodology for Highway Bridges using a Component Level Approach, Earthq. Eng. & Struct. Dyn., 36(6), pp.823~839.
  10. Sofi, F.A., Steelman, J.S. (2017) Parametric Influence of Bearing Restraint on Nonlinear Flexural Behavior and Ultimate Capacity of Steel Girder Bridges, J. Bridge Eng., 22(7), p.04017033.
  11. Zhong, H., Yuan, W., Dang, X., Deng, X. (2022) Seismic Performance of Composite Rubber Bearings for Highway Bridges: Bearing Test and Numerical Parametric Study, Eng. Struct., 253, p.113680.