DOI QR코드

DOI QR Code

Comparison of long cable impedances using multiphysics and equivalent circuit models

  • Byungju Bae (Department of Electrical and Electronics Engineering, Konkuk University) ;
  • Taehoon Chin (Department of Electrical and Electronics Engineering, Konkuk University) ;
  • Xuanxi Liu (Department of Electrical and Electronics Engineering, Konkuk University) ;
  • Younghoon Cho (Department of Electrical and Electronics Engineering, Konkuk University)
  • Received : 2024.03.31
  • Accepted : 2024.05.28
  • Published : 2024.08.20

Abstract

When a long cable is included in power conversion systems, it causes adverse effects, such as voltage spikes and ringing at load terminals. These nonideal voltages can break the insulation of electric machines, such as transformers and motors, and reduce their lifespan. To estimate such voltage characteristics, cable impedance should be modeled on the basis of the cable length. In this paper, two cable impedance models, a multiphysics model and an equivalent circuit model, are introduced. The multiphysics model using Ansys Q3D Extractor is suggested in consideration of the structure, material, and length of a practical cable. Meanwhile, the equivalent circuit model can be quickly utilized to examine voltage spikes and frequency. The accuracy of the proposed models is verified through simulation and the experimental results based on a motor drive system equipped with 30 and 100-m cables.

Keywords

Acknowledgement

This work was supported by the National Research Foundation of Korea grant funded by the government of Korea (MSIT, No. 2021R1A5A1031868) and the Technology Innovation Program (No. 20010965, Development of Electronic Current Voltage Transformer and Spacer based on Eco-friendly Solid Insulation) funded by the Ministry of Trade, Industry, and Energy and Korea Evaluation Institute of Industrial Technology of the Republic of Korea.

References

  1. Persson, E.: Transient effects in application of PWM inverters to induction motors. IEEE Trans. Ind. Appl. 28(5), 1095-1101 (1992) https://doi.org/10.1109/28.158834
  2. Bonnett, A.H.: Analysis of the impact of pulse-width modulated inverter voltage waveforms on AC induction motors. IEEE Trans. Ind. Appl. 32(2), 386-392 (1996) https://doi.org/10.1109/28.491488
  3. Moreira, A. F., Lipo, T. A., Venkataramanan, G., Bernet, S.: High frequency modeling for cable and induction motor overvoltage studies in long cable drives. In: IEEE Industry Applications Conference. In: 36th IAS Annual Meeting, pp 1787-1794 (2001)
  4. Aoki, N., Satoh, K., Nabae, A.: Damping circuit to suppress motor terminal overvoltage and ringing in PWM inverter-fed AC motor drive systems with long motor leads. IEEE Trans. Ind. Appl. 35(5), 1014-1020 (1999) https://doi.org/10.1109/28.793361
  5. Amarir, S., Al-Haddad, K.: A modeling technique to analyze the impact of inverter supply voltage and cable length on industrial motor-drives. IEEE Trans. Power Electron. 23(2), 753-762 (2008) https://doi.org/10.1109/TPEL.2007.915773
  6. Wang, L., Ngai-Man-Ho, C., Canales, F., Jatskevich, J.: High-frequency modeling of the long-cable-fed induction motor drive system using TLM approach for predicting overvoltage transients. IEEE Trans. Power Electron. 25(10), 2653-2664 (2010) https://doi.org/10.1109/TPEL.2010.2047027
  7. Wu, Y., Choksi, K., ul Hassan, M., Luo, F.: An extendable and accurate high- frequency modelling of three-phase cable for prediction of reflected wave phenomenon. In: IEEE Applied Power Electronics Conference and Exposition, pp 944-950 (2022)
  8. Zhong, E., Lipo, T.A.: Improvements in EMC performance of inverter-fed motor drives. IEEE Trans. Ind. Appl. 31(6), 1247-1256 (1995) https://doi.org/10.1109/28.475694
  9. Mirafzal, B., Skibinski, G.L., Tallam, R.M., Schlegel, D.W., Lukaszewski, R.A.: Universal induction motor model with low-to-high frequency-response characteristics. IEEE Trans. Ind. Appl. 43(5), 1233-1246 (2007) https://doi.org/10.1109/TIA.2007.904401
  10. Perera, P.D.C., Blaabjerg, F., Pedersen, J.K., Thogersen, P.: A sensorless, stable V/f control method for permanent-magnet synchronous motor drives. IEEE Trans. Ind. Appl. 39(3), 783-791 (2003) https://doi.org/10.1109/TIA.2003.810624
  11. Tang, Z., Li, X., Dusmez, S., Akin, B.: A new V/f-based sensor-less MTPA control for IPMSM drives. IEEE Trans. Power Electron. 31(6), 4400-4415 (2015) https://doi.org/10.1109/TPEL.2015.2470177
  12. Ganjavi, A., Zare, F., Kumar, D., Abbosh, A.M., Bialkowski, K.S., Davari, P.: Mathematical model of common-mode sources in long-cable-fed adjustable speed drives. IEEE Trans. Ind. Appl. 58(2), 2013-2028 (2022) https://doi.org/10.1109/TIA.2021.3136825