DOI QR코드

DOI QR Code

A numerical model for the long-term service analysis of steel-concrete composite beams regarding construction stages: Case study

  • Marcela P. Miranda (Center of Applied Mechanics and Computational (CEMACOM,) Engineering School of Federal University of Rio Grande do Sul) ;
  • Jorge L. P. Tamayo (Department of Civil Engineering, Engineering School Federal University of Rio Grande do Sul) ;
  • Inacio B. Morsch (Department of Civil Engineering, Engineering School Federal University of Rio Grande do Sul)
  • 투고 : 2024.02.09
  • 심사 : 2024.07.08
  • 발행 : 2024.07.25

초록

The Caynarachi Bridge is a 130 m long posttensioned steel-concrete composite bridge built in Peru. The structural performance of this bridge under construction loads is reviewed in this paper using numerical simulation. Hence, a numerical model using shell finite elements to trace its deformational behavior at service conditions is proposed. The geometry and boundary conditions of the superstructure are updated according to the construction schedule. Firstly, the adequacy of the proposed model is validated with the field measurements obtained from the static truck load test. Secondly, the study of other scenarios less explored in research are performed to investigate the effect of some variables on bridge performance such as time effects, sequence of execution of concrete slabs and type of supports conditions at the abutments. The obtained results show that the original sequence of execution of the superstructure better behaves mechanically in relation to the other studied scenarios, yielding smaller stresses at critical cross sections with staging. It is also demonstrated that an improper slab staging may lead to more critical stresses at the studied cross sections and that casting the concrete slab at the negative moment regions first can lead to an optimal design. Also, the long-term displacements can be accurately predicted using an equivalent composite resistance cross section defined by a steel to concrete modulus ratio equal to three. This article gives some insights into the potential shortcomings or advantages of the original design through high-fidelity finite element simulations and reinforces the understating of posttensioned composite bridges with staging.

키워드

과제정보

The CNPq and CAPES are acknowledged for funding the first author's PhD scholarship.

참고문헌

  1. AASHTO (2002), Provisional Standards. American Association of State Highway and Transportation Officials; Washington, D.C. United States.
  2. AASHTO (2007), AASHTO LRFD Bridge Design Specifications. American Association of State Highway and Transportation Officials; Washington, D.C. United States.
  3. ACI 209 (1992), Prediction of creep, shrinkage, and temperature effects in concrete structures, American Concrete Institute; Farmington Hills, MI, USA.
  4. Butler, L.J., Lin, W., Xu, J., Gibbons, N., Elshafie, M.Z.E.B. and Middleton, C.R. (2018), "Monitoring, modeling, and assessment of a self-sensing railway bridge during construction", J Bridge Eng, 23, 04018076. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001288.
  5. Cao, R., El-Tawil, S. and Agrawal, A.K. (2020), "Miami pedestrian bridge collapse: Computational Forensic analysis", J. Bridge Eng., 25, 04019134. https://doi.org/10.1061/(ASCE)BE.1943-5592.00015.
  6. Debaiky, A.S. (1997), "Analysis of time-dependent effects on segmental prestressed concrete curved box-girder bridges", Master Dissertation, Concordia University, Montreal.
  7. Erhan, S. and Dicleli, M. (2015), "Comparative assessment of the seismic performance of integral and conventional bridges with respect to the differences at the abutments", Bull. Earthq. Eng., 13(2), 653-677. https://doi.org/10.1007/s10518-014-9635-8.
  8. Farre-checa, J., Komarizadehasl, S., Ma, H., Lozano-Galant, J.A. and Turmo, J. (2022), "Direct simulation of the tensioning process of cable-stayed bridge cantilever construction", Autom Constr, 137(5), 104197. https://doi.org/10.1016/j.autcon.2022.104197.
  9. Han, C., Zhang, J., Zhou, D., Lan, S. and Wang, P. (2020), "Computing creep secondary internal forces in a continuous steel-concrete composite beam constructed through segmented pouring", J Struct Eng, 146, 1-13. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002494.
  10. He, J., Li, X., Li, C., Correia, J.A.F.O., Xin, H. and Zhou, M. (2020), "A novel asynchronous-pouring-construction technology for prestressed concrete box girder bridges with corrugated steel webs", Struct, 27, 1940-1950. https://doi.org/10.1016/j.istruc.2020.07.077.
  11. Huang, E., Ke, H. and Hu, H. (2023), "Optimization of construction process and determination of intermediate cable forces for composite beam cable-stayed bridge", Appl Sci, 13, 5738. https://doi.org/10.3390/app13095738.
  12. Manso, A.N., Martinez, M.A., Diaz, J.J.C., Fresno, D.C. and Rabanal, F.A. (2015), "A new steel bridge launching system and method. Fundamentals", Hormig Acero, 66, 151-163. http://dx.doi.org/10.1016/j.hya.2015.09.001.
  13. Mari, A., Mirambell, E. and Estrada, I. (2003), "Effects of construction process and slab prestressing on the serviceability behaviour of composite bridges", J. Constr. Steel Res., 59, 135-163. https://doi.org/10.1016/S0143-974X(02)00029-9.
  14. Mari, A.R. (2000), "Numerical simulation of the segmental construction of three-dimensional concrete frames", Eng Struct, 22, 585-596. https://doi.org/10.1016/S0141-0296(99)00009-7.
  15. Miranda, M.P., Tamayo, J.P. and Morsch, I.B. (2022a), "Reassessment of viscoelastic response in steel-concrete composite beams", Struc Eng Mech, 81, 617-631. https://doi.org/10.12989/sem.2022.81.5.617.
  16. Miranda, M.P., Tamayo, J.P. and Morsch, I.B. (2022b), "Benchmark examples for structural system changes: analytical and numerical approaches", Arch Comput. Meth. Eng., 29, 3609-3637. https://doi.org/10.1007/s11831-022-09709-8.
  17. Ozcelik, M. and Tutus, O. (2020), "An investigation on Botan Bridge (Siirt - Turkey) collapse during construction", Struct, 25, 268-273. https://doi.org/10.1016/j.istruc.2020.03.017.
  18. Reginato, L., Tamayo, J. and Morsch, I. (2018), "Finite element study of effective width in steel-concrete composite beams under long-term service loads", Lat Am J. Solids Struct., 15, 1-25. https://doi.org/10.1590/1679-78254599.
  19. Shushkewich, K.W. (1986), "Time-dependent analysis of segmental bridges", Comput Struct, 23, 95-118. https://doi.org/10.1016/0045-7949(86)90111-2.
  20. Su, D., Nassif, H. and Xia, Y. (2018), "Optimization of deck construction staging for multiple-span continuous steel girder bridge", J Perform Constr Facil, 32, 1-11. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001073.
  21. Su, X. and Zhou, M. (2023), "Shear force transfer efficiency of tapered bridges with trapezoidal corrugated steel webs", J. Construct. Steel Res., 211, 108135. https://doi.org/10.1016/j.jcsr.2023.108135.
  22. Tamayo, J.L.P., Morsch, I.B. and Awruch, A.M. (2013), "Static and dynamic analysis of reinforced concrete shells", Lat. Am. J. Solids Struct, 10, 1109-1134. https://doi.org/10.1590/S1679-78252013000600003.
  23. Tamayo, J.L.P., Morsch, I.B. and Awruch, A.M. (2015), "Shorttime numerical analysis of steel-concrete composite beams", J. Brazil Soc. Mech. Sci. Eng., 37, 1097-1109. https://doi.org/10.1007/s40430-014-0237-9.
  24. Tamayo, J.P., Franco, M.I., Morsch, I.B., Desir, J.M. and Wayar, A.M.M. (2019), "Some aspects of numerical modeling of steel-concrete composite beams with prestressed tendons", Lat. Am. J. Solids Struct, 16, e219. https://doi.org/10.1590/1679-78255599.
  25. Vokunnaya, S.S. and Tanaji, T. (2017), "Construction stage analysis of segmental cantilever bridge", Int. J. Civil Eng. Technol., (IJCIET), 8(2), 373-382.
  26. Wang, G.M., Zhu, L., Zhou, G.P., Han, B. and Ji, W.Y. (2020a), "Experimental research of the time-dependent effects of steel- concrete composite girder bridges during construction and operation periods", Mater, 13, 1-18. https://doi.org/10.3390/ma13092123.
  27. Wang, X., Wang, H., Sun, Y., Mao, X. and Tang, S. (2020b), "Process-independent construction stage analysis of selfanchored suspension bridges", Autom Constr, 117, 103-127. https://doi.org/10.1016/j.autcon.2020.103227.
  28. Zhu, L., Wang, Y., Zhou, G. and Han, B. (2022), "Structural health monitoring continuous bridge during construction and vehicle load tests", Mech Adv Mater Struct, 29, 1370-1385. https://doi.org/10.1080/15376494.2020.1820117.