Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Buckling behavior of bundled inclined columns: Experimental study and design code verification

  • Moussa Leblouba (Department of Civil & Environmental Engineering, College of Engineering, University of Sharjah) ;
  • Samer Barakat (Department of Civil & Environmental Engineering, College of Engineering, University of Sharjah) ;
  • Raghad Awad (Department of Civil & Environmental Engineering, College of Engineering, University of Sharjah) ;
  • Saif Uddin Al-Khaled (Department of Civil & Environmental Engineering, College of Engineering, University of Sharjah) ;
  • Abdulrahman Metawa (Department of Civil & Environmental Engineering, College of Engineering, University of Sharjah) ;
  • Abdul Saboor Karzad (Department of Civil Engineering, Faculty of Engineering, University of Ottawa)
  • Received : 2024.03.28
  • Accepted : 2024.07.03
  • Published : 2024.07.25
⟨ Previous Next ⟩

Abstract

Not all structural columns maintain a vertical orientation. Several contemporary building structures have inclined columns, introducing distinct challenges, particularly in buckling behavior. This study examines the buckling behavior of inclined, thin-walled steel bundled columns, differing from typical vertical columns. Using specimens with three tubes welded to plates linearly aligned at the top and triangularly at the bottom, tests indicated that buckling capacity increases with tube wall thickness and diameter but decreases with column height. Inclined tubes in bundled columns showed improved buckling resistance over vertical ones. Results were verified against standard steel design guidelines to assess their predictive accuracy.

Keywords

Acknowledgement

This research was supported by the College of Graduate Studies and the SCMASS Research Group at the University of Sharjah. The authors are grateful for this support.

References

  1. Akgoz, B. and mer Civalek, O. (2013), "Buckling analysis of linearly tapered micro-columns based on strain gradient elasticity", Struct. Eng. Mech., 48(2), 195-205.
  2. Allouzi, R. (2019), "Behavior of slender RC columns with inclination", Proceedings of the Institution of Civil Engineers - Structures and Buildings, 172(10), 739-748. https://doi.org/10.1680/jstbu.18.00011.
  3. Allouzi, R., Abu-Shamah, A. and Alkloub, A. (2022), "Capacity prediction of straight and inclined slender concrete-filled double-skin tubular columns", Multidiscipl. Modeling Mater. Struct., 18(4), 688-707. https://doi.org/10.1108/MMMS-05-2022-0079.
  4. ANSI/AISC 360-22 (2022), Specification for Structural Steel Buildings.
  5. Avcar, M. (2014), "Elastic buckling of steel columns under axial compression", Amer. J. Civil Eng., 2(3), 102. https://doi.org/10.11648/j.ajce.20140203.17.
  6. British Standard (1993), Eurocode 3-Design of steel structures-BS EN, 1(1).
  7. BS EN ISO 6892-1:2016 (2016), Metallic Materials-Tensile Testing Part 1: Method of Test at Ambient Temperaturee., European Committee for Standardization.
  8. E8/E8M-16a (2011), Test Methods for Tension Testing of Metallic Materials. ASTM International. https://doi.org/10.1520/E0008_E0008M-16A.
  9. Elishakoff, I. (2001), "Inverse buckling problem for inhomogeneous columns", Int. J. Solids Struct.
  10. Elishakoff, I. and Rollot, O. (1999), "New closed-form solutions for buckling of a variable stiffness column by mathematica®", J. Sound Vib., 224(1), 172-182. https://doi.org/10.1006/jsvi.1998.2143.
  11. Hassan, F.F. and Al Zaidee, S.R. (2020), "Deformation and strength of inclined RC isolated columns using experimental and three-dimensional finite element analyses", In IOP Conference Series: Materials Science and Engineering, 745(1), 012129. https://doi.org/10.1088/1757-899X/745/1/012129.
  12. Huang, Y. and Li, X.-F. (2011), "Buckling analysis of nonuniform and axially graded columns with varying flexural rigidity", J. Eng. Mech., 137(1), 73-81. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000206.
  13. Javidan, F., Heidarpour, A., Zhao, X.-L. and Minkkinen, J. (2015), "Performance of innovative fabricated long hollow columns under axial compression", J. Construct. Steel Res., 106, 99-109. https://doi.org/10.1016/j.jcsr.2014.12.013.
  14. Kamarudin, M.K., Yusoff, M.M., Disney, P. and Parke, G.A.R. (2018), "Experimental and numerical investigation of the buckling performance of tubular glass columns under compression", Structures, 15, 355-369. https://doi.org/10.1016/j.istruc.2018.08.002.
  15. Kilic, M. and Cinar, M. (2021), "Buckling behavior of sulfatecorroded thin-walled cylindrical steel shells reinforced with CFRP", Iran. J. Sci. Technol., Transact. Civil Eng., 45, 2267-2282.
  16. Lam, D., Dai, X.H., Han, L.H., Ren, Q.X. and Li, W. (2012), "Behavior of inclined, tapered, and STS square CFST stub columns subjected to axial load", Thin-Wall. Struct., 54, 94-105. https://doi.org/10.1016/j.tws.2012.02.010.
  17. Li, Q.S. (2001), "Exact solutions for buckling of nonuniform columns under axial concentrated and distributed loading", Europ. J. Mech. A/Solids, 20(3), 485-500. https://doi.org/10.1016/S0997-7538(01)01143-3.
  18. Marques, L., Da Silva, L.S. and Rebelo, C. (2014), "Rayleigh-Ritz procedure for determination of the critical load of tapered columns", Steel Compos. Struct., 16(1), 45-58.
  19. Oikonomopoulou, F., Van Den Broek, E.A.M., Bristogianni, T., Veer, F.A. and Nijsse, R. (2017), "Design and experimental testing of the bundled glass column", Glass Struct. Eng., 2(2), 183-200. https://doi.org/10.1007/s40940-017-0041-x.
  20. Taraghi, P., Zirakian, T. and Karampour, H. (2021), "Parametric study on buckling stability of CFRP-strengthened cylindrical shells subjected to uniform external pressure", Thin-Wall. Struct., 161, 107411. https://doi.org/10.1016/j.tws.2020.107411.