DOI QR코드

DOI QR Code

The behaviors of a Korean weathered soil under monotonic loadings

  • Sangseom Jeong (School of Civil and Environmental Engineering, Yonsei University) ;
  • Junyoung Ko (Department of Civil Engineering, Chungnam National University) ;
  • Sumin Song (School of Civil and Environmental Engineering, Yonsei University) ;
  • Jaehong Kim (Department of Civil Engineering, Dongshin University)
  • Received : 2023.02.02
  • Accepted : 2024.07.06
  • Published : 2024.07.25

Abstract

This paper describes the general trends of the stress-strain behavior of Korean weathered soil prior to failure and behavior at failure under triaxial loading. The isotropically consolidated samples were tested in a testing device under monotonic undrained loading. Relative density, effective mean pressure and fine content were the factors varied in the experimental investigation. The test results were analyzed and their behaviors were interpreted within the framework of plasticity constitutive model for a weathered Korean silty sand. Possible physical bases for the proposed forms are discussed. Validation of the applied model using the laboratory results is also given.

Keywords

Acknowledgement

This work was supported by a Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (No. 2018R1A6A1A08025348).

References

  1. Abdul-Khader, M.-A. and Jeong, S. (2021), "Behavior of weathered soil under combined undrained cyclic-monotonic loading", Int. J. Geomech., 21, 04021026. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001969.
  2. Aziz, M. (2020), "Using grain size to predict engineering properties of natural sands in Pakistan", Geomech. Eng., 22(2), 165-171. https://doi.org/10.12989/gae.2009.1.4.263.
  3. Beaty, M. and Byrne, P.M. (1998), "An effective stress model for predicting liquefaction behaviour of sand", Proceedings of the Specialty Conference, Seattle, WA, USA, August.
  4. Castro, G. (1969), "Liquefaction of sands", Harvard Soil Mechanics Series, 81, Cambridge, Massachusetts.
  5. Dafalias, Y.F. and Manzari, M.T. (2004), "Simple plasticity sand model accounting for fabric change effects", J. Eng. Mech., 130, 622-634. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(622).
  6. Fleming, L.N. and Duncan, J.M. (1990), "Stress-deformation characteristics of Alaskan silt", J. Geotech. Eng., 116, 377-393. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:3(377).
  7. Geocomp Corp. (2013), Lab Services: Soil Testing, Geocomp Corp., Acton, MA, USA.
  8. Georgiannou, V.N., Burland, J.B. and Hight, D.W. (1990), "The undrained behaviour of clayey sands in triaxial compression and extension", Geotechnique, 40, 431-449. https://doi.org/10.1680/geot.1990.40.3.431
  9. Gu, R., Fang, Y., Jiang, Q. and Li, B. (2022), "Effect of particle size on direct shear deformation of soil", Geomech. Eng., 28(2), 135-143. https://doi.org/10.12989/gae.2022.28.2.135.
  10. Jefferies, M.G. (1993), "Nor-sand: a simple critical state model for sand", Geotechnique, 43(1), 91-103. https://doi.org/10.1680/geot.1993.43.1.91
  11. Lee, S.G. and de Freitas, M.H. (1989), "A revision of the description and classification of weathered granite and its application to granites in Korea", Q. J. Eng. Geol., 22(1), 31-48. https://doi.org/10.1144/GSL.QJEG.1989.022.01.0.
  12. Li, C. and Zoua, J.F. (2019), "Created cavity expansion solution in anisotropic and drained condition based on Cam-Clay model", Geomech. Eng., 19(2), 141-151. https://doi.org/10.12989/gae.2019.19.2.141.
  13. Lin, H.D., Wang, C.C. and Wang, X.H. (2018), "A simplified method to estimate the total cohesion of unsaturated soil using an UC test", Geomech. Eng., 16(6), 599-608. https://doi.org/10.12989/gae.2018. 16.6.599.
  14. Nova, R. and Wood, D.M. (1979), "A constitutive model for sand in triaxial compression", Int. J. Numer. Anal. Method. Geomech., 3, 255-278. https://doi.org/10.1002/nag.1610030305.
  15. Peters, J.F. (1988), "Determination of undrained shear strength of low plasticity clays", Proceedings of the Symposium on Advanced Triaxial Testing of Soil and Rock. Louisville, KY, USA, June.
  16. Puebla, H., Byrne, P.M. and Phillips, R. (1997), "Analysis of CANLEX liquefaction embankments: prototype and centrifuge models", Can. Geotech. J., 34, 641=657. https://doi.org/10.1139/t97-034.
  17. Roscoe, K. and Burland, J.B. (1968), "On the generalized stressstrain behaviour of wet clay", Engineering Plasticity, Cambridge University Press, Cambridge, 535-609.
  18. Shin, J.H. and Jeong, S.S. (1999), "Undrained Behavior of ClaySand Mixtures under Triaxial Loading", J. Korean Geotech. Soc., 15(3), 71-81.
  19. Silvestri, V. and Abou-Samra, G. (2012), "Analytical solution for undrained plane strain expansion of a cylindrical cavity in modified cam clay", Geomech. Eng., 4(1), 19-37. https://doi.org/10.12989/gae.2009.1.4.263.
  20. Wood, D.M. (1990), Soil behaviour and critical state soil mechanics. Cambridge university press, Cambridge, UK.
  21. Yoshimine, M., Ishihara, K. and Vargas, W. (1998), "Effects of principal stress direction and intermediate principal stress on undrained shear behavior of sand", Soils Found., 38(3), 179-188. https://doi.org/10.3208/sandf.38.3_179
  22. Yu, Y. and Axelsson, K. (1992), "A Plasticity Model for Silt", Proceedings of the Fourth International Symposium on Numerical Models in Geomechanics, Swansea, UK, August.
  23. Ziotopoulou, K. and Boulanger, R.W. (2013), "Numerical modeling issues in predicting post-liquefaction reconsolidation strains and settlements", Proceedings of The 10th International Conference on Urban Earthquake Engineering, Tokyo, Japan, March.