Acknowledgement
본 연구는 산업통상자원부 및 KETEP의 다중이용 에너지시설 안전진단 및 위험예측 안전기술개발사업(과제번호: 202159100200)의 연구결과로 수행되었습니다.
References
- Lee, K. S., Kim, J. W., "A study on strategy of condition based maintenance for rolling stock", 7th IET Conference on Railway Condition Monitoring, 1192, (2016)
- Yan, R., Gao, R. X., "Complexity as a measure for machine health evaluation", IEEE Trans. Instrum. Meas, 53, 1327-1334, (2004)
- Garcia, Marquez, F. P., Tobias, A. M., Pinar, Perez, J.M., "Condition monitoring of wind turbines: techniques and methods", Renew Energy, 46, 169-178, (2012)
- Kumar, M., Shankar, Mukherjee, P., Mohan, Misra, N., "Advancement and current status of wear debris analysis for machine condition monitoring: a review", Ind. Lubr. Tribol., 65, 3-11, (2013)
- Khan, M. A., Starr, A. G., "Wear debris: basic features and machine health diagnostics", Insight Non-Destr. Test Cond. Monit., .48, 470-476, (2006)
- Tribol. Lubr., "Review of Machine Condition Monitoring with Oil Sensors-Types of Sensors and Their Functions", Tribology and Lubricants, 36, 297~306, (2020)
- Yang, Hongyu and Mathew, Joseph and Ma, Lin, "Vibration feature extraction techniques for fault diagnosis of rotating machinery : a literature survey," In: Asia-Pacific Vibration Conference, (2003)
- Kim Y W, et al., "Analysis and processing of shaft angular velocity signals in rotating machinery for diagnostic applications. in Acoustics, Speech, and Signal Processing," ICASSP-95, 5, 2971-2974, (1995)
- McFadden P D and Smith J D, "The vibration produced by multiple point defects in a rolling element bearing." Journal of Sound and Vibration, 98(2): 263-273, (1985)
- Tandon N and Choudhury A, "A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings," Tribology International, 32(8): 469-480, (1999)
- Lebold M, et al., "Review of vibration analysis methods for gearbox diagnostics and prognostics," 54th meeting of the society for machinery failure prevention technology, Virginia Beach, VA, 623-634, (2000)
- H.A. Mubarak, F.A. Khan, M.M. Oskay, "ESP Failures Analysis Solutions in Divided Zone Case Study.", SPE 81488 Presented at the SPE 13th Middle East Oil Show and Conference, (2003)
- G. Regres, M. Fontana, M. Ribeiro, "Electric submersible pump vibration analysis under several operational conditions for vibration fault differential diagnosis", Ocean. Eng. 219, (2021)
- Tandon N and Choudhury A, "A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings," Tribology International, 32(8): 469-480, (1999)
- V.Manish, V.Harshlatac, P.Rajput, "Vibration Analysis & Condition Monitoring for Rotating Machines:A Review", 5th International Conference of Materials Processing and Characterization, 4(2), 2659-2664, (2017)
- Yang D-M, et al., "Third-order spectral techniques for the diagnosis of motor bearing condition using artificial neural networks", Mechanical Systems and Signal Processing, 16(2-3): 391-411, (2002)
- Thuy Chu a, Tan Nguyen a, Hyunsang Yoo a, " A review of vibration analysis and its applications" Heliyon, 10(5), e26282, (2024)
- Gh. Buzdugan, E. Mihailescu, M. Rades, Vibration Measurement, Springer Netherlands, (2013)
- International Organization for Standardization, Mechanical Vibration-Evaluation of Machine Vibration by Measurements on Non-rotating Parts - Part 1: General Guidelines, ISO Standard No. 10816-1:1995, (1995)
- Yang D-M, et al.," Third-order spectral techniques for the diagnosis of motor bearing condition using artificial neural networks" Mechanical Systems and Signal Processing, 16(2-3): 391-411, (2002)
- Lee J G, Ryu H G, "Performance Comparison of OFDM Based on Fourier Transform and Wavelet OFDM Based on Wavelet Transform", Journal of Hydrogen and New Energy, 34(6), 682~688, (2023)
- R.B. Randall, J. Antoni, "Rolling element bearing diagnostics A tutorial", Mechanical Systems and Signal Processing, 25, 485520, (2011)
- Pornchai N, Dutsadee J., "Bearing Fault Monitoring by Comparison with Main Bearing Frequency Components Using Vibration Signal", Business and Industrial Research (ICBIR), 292-296, (2018)
- Kim J Y, Choi G T, "A Study on Failure Mode and Effect Analysis of Hydrogen Fueling Nozzle Used in Hydrogen Station", Journal of Hydrogen and New Energy, 34(6), 682~688, (2023)
- Hitesh H., Vikas J., I.V. Y, "The Common Faults and Analysis of Hydrogen Compressor",IOP Conference Series: Earth and Environmental Science, (2020)