DOI QR코드

DOI QR Code

A Study on the Required Horsepower of Tugboats at Jeju Port for Car Ferries - Focusing on Car Ferry H -

카페리여객선 제주항 입출항 시 예선 사용 기준에 관한 연구 - 카페리여객선 H호를 중심으로 -

  • Byung-Sun Kang (Korea Maritime Transportation Safety Authority) ;
  • Chang-Hyun Jung (Mokpo National Maritime University)
  • 강병선 (한국해양교통안전공단 ) ;
  • 정창현 (국립목포해양대학교)
  • Received : 2024.02.13
  • Accepted : 2024.04.26
  • Published : 2024.04.30

Abstract

Four accidents occurred between 2020 and 2022 after car ferries built according to a coastal passenger ship modernization plan collided with other ships or came into contact with the dock when entering Jeju Port. Accidents primarily occurred owing to careless ship handling and drift by wind during ship handled by herself using bow and stern thrusters without tugboats. Accordingly, in this study, we analyzed the collision accident focusing on car ferry H and the critical wind speed at which the ship cannot be controlled using its own power, tugboat operation plan in increasing wind speed were proposed based on the power required for the ship to berth parallel to the pier without a tugboat considering the external force and moment generated while the ship is berthing. A analysis of the critical wind speed of car ferry H by relative wind direction when using tugboats or not according to the loading status and the berthing speed, showed that one tugboat should be used at the stern when the lateral wind speed is over 10 m/s and two tugboats should be used when the lateral wind speed is over 14m/s berthing at Jeju port.

연안여객선 현대화계획에 따라 건조된 카페리여객선이 제주항 입항 시 다른 선박과 충돌 또는 부두와 접촉한 사고가 2020~2022년 사이에 4건 발생하였다. 사고는 주로 예선 없이 선수 및 선미 스러스터를 이용한 자력도선 중 조선 부주의와 바람에 의한 선박의 압류로 발생하였다. 이에 본 연구에서는 카페리여객선 H호를 중심으로 충돌사고를 분석하고, 선박이 접안 중 발생하는 외력과 모멘트에 따라 선박이 예선 없이 자력으로 부두와 평행하게 접안하기 위한 스러스터 및 엔진의 소요출력을 기반으로 자력으로 선박을 제어할 수 없는 한계풍속과 풍속 증가에 따른 추가적인 예선의 운영방안을 제시하였다. H호의 적재상태, 접안속도에 따른 자력 또는 예선 사용 시 한계풍속을 상대풍향별로 분석한 결과, 제주항 접·이안 시 횡방향 풍속이 10m/s 이상일 때 예선 1척을 선미에 사용하고, 횡방향 풍속이 14m/s 이상일 때에는 예선 2척을 사용 것이 타당할 것으로 판단된다.

Keywords

References

  1. Hughes, G.(1930), Model Experiments on the Wind Resistance of Ships, Transactions of the Institute of Naval Architects, Vol. 72.
  2. Inoue, K.(2013), Theory and Practice of Ship Handling, Sanghakdang, p. 149-197.
  3. Jung, C. Y. and T. K. Nam(2016), The Lateral Current Force Coefficient in the Real Ship Towing Test, Journal of the Korean Society of Marine Environment & Safety, Vol. 22, No. 5, pp. 373-379.
  4. Kang, B. S. and C. H. Jung(2023), A Study on the Concept Design of Automatic Vessel Berthing Program, Journal of the Korean Society of Marine Environment & Safety, Vol. 29, No. 7, pp. 857-862.
  5. Kim, T. I., S. H. Park, and H. Y. Ryu(2020), Policy Development for Efficiency Improvement of Domestic Passenger Shipping in Korea, Korea Maritime Institute, pp. 15-33.
  6. Korea Maritime Transportation Safety Authority(KOMSA), (2023a), Maritime Transportation Safety Information System (MTIS), https://mtis.komsa.or.kr/mn/view (Accessed: 10th Jan 2024).
  7. Korea Maritime Transportation Safety Authority(KOMSA) (2023b), https://www.komsa.or.kr/bbs/BBSMSTR_000000000731/view.do (Accessed: 10 th Jan 2024).
  8. Ministry of Oceans and Fisheries(MOF)(2016), The 1st Coastal Passenger Ship Modernization Plan, pp. 3-17.
  9. Ministry of Oceans and Fisheries(2023), Harbor and Fishery Deisgn Criteria
  10. Mokpo Regional Maritime Safety Tribunal Decision(2023), No. 2023-045.
  11. OCIMF(2008), Mooring Equipment Guidelines 3rd Edition, Witherby Seamanship International, pp. 179-196.
  12. Ship resistance and propulsion(2012), p. 72.